Self-supported iron-doped cobalt-copper oxide heterostructures for efficient electrocatalytic denitrification.

The electrocatalytic reduction of nitrate ions (NO3-) to nitrogen gas (N2) has emerged as an effective approach for mitigating nitrate pollution in water bodies. However, the development of efficient and highly selective cathode materials remains challenging. Conventional copper-based catalysts often exhibit low selectivity because they strongly adsorb oxygen. In this study, a straightforward solvothermal and pyrolysis method was used to grow iron-doped cobalt-copper oxide heterogeneous structures on copper foam surfaces (Fe-CoO/CuO@CF). Then, the effects of the applied potential, initial NO3- concentration, Cl- concentration, electrolyte pH, and different catalysts on the catalyst performance were investigated. Compared with recently reported congeners, Fe-CoO/CuO@CF is less expensive and exhibits outstanding activity for NO3- reduction. Meanwhile, under a cathode potential of - 1.31 V vs. Ag/AgCl, Fe-CoO/CuO@CF degrades 98.6 % of NO3- in 200 min. In addition, when employing a method inspired by NH4+ removal by breakpoint chlorination, N2 selectivity over Fe-CoO/CuO@CF was raised from 10 % without Cl- to 99.7 % when supplemented with Cl-. The catalyst demonstrated excellent cyclic stability, maintaining a high electrocatalytic activity for the conversion of NO3- to N2 gas over eleven cycles. Moreover, Fe-CoO/CuO@CF enabled 63.7 % removal of NO3- from wastewater (50 mg/L NO3--N) prepared from natural water, with 100 % conversion to N2. Computational studies showed that iron doping decreased the free energy change of the intermediate of NO3- reduction reaction. This study provides an effective strategy for the electrochemical reduction of nitrate to nitrogen gas and offers good prospects for addressing nitrate pollution.

Evaluating the efficacy and suggesting technical optimizations for endoscopic lumbar interbody fusion across different lumbar spondylolisthesis types.

Purpose: To evaluate the efficacy of the endoscopic lumbar interbody fusion technique across different types of lumbar spondylolisthesis, specifically Grade I and Grade II, and suggest technical optimizations based on therapeutic outcomes, complications, and patient satisfaction for both grades. Methods: We analyzed data from 57 L4 to 5 spondylolisthesis patients, all categorized as either Grade I or Grade II, comprising 31 males and 26 females. Of these, 36 were diagnosed with Grade I and 21 with Grade II. All subjects underwent the endoscopic lumbar interbody fusion procedure. Primary evaluation metrics included pre and post-operative Vasual Analogue Scale（VAS） pain scores, Osewewtry Disability Index（ODI） functional scores, surgical duration, intraoperative blood loss, degree of spondylolisthesis correction, complications, and patient satisfaction levels. Results: At a minimum of 6 months post-operation, the VAS score for the Grade I cohort reduced from an initial 7.30 ± 0.69 to 2.97 ± 0.47, while the Grade II cohort saw a decrease from 7.53 ± 0.56 to 3.37 ± 0.62 (P = 0.0194). The ODI score in the Grade I group declined from 66.88 ± 5.15 % pre-operation to 29.88 ± 6.36 % post-operation, and in the Grade II group, it decreased from 69.33 ± 5.27 % to 34.66 ± 6.01 % (P = 0.0092). The average surgical duration for the Grade I group stood at 155.72 ± 17.75 min, compared to 180.38 ± 14.72 min for the Grade II group (P < 0.001). The mean intraoperative blood loss for the Grade I group was 144.58 ± 28.61 ml, whereas the Grade II group registered 188.23 ± 9.41 ml (P < 0.001). Post-surgery, 83 % of the Grade I patients achieved a correction degree exceeding 80 %, and 61 % of the Grade II patients surpassed 50 % (P = 0.0055). Complication rates were recorded at 8 % for Grade I and 16 % for Grade II. Patient satisfaction reached 94 % in the Grade I cohort and 90 % in the Grade II cohort. Conclusion: Endoscopic lumbar interbody fusion showcases promising therapeutic outcomes for both Grade I and Grade II lumbar spondylolisthesis. However, surgeries for Grade II spondylolisthesis tend to be lengthier, more challenging, involve greater blood loss, and have a heightened complication risk. Tailored technical adjustments and enhancements are essential for addressing the distinct spondylolisthesis types.

Impact of extraction method on the lipids of Himalayan marmot oil with ultrahigh-performance liquid chromatography Q-Exactive Orbitrap mass spectrometry analysis.

RATIONALE: Himalayan marmot oil (SPO) has been used for pharmaceutical purposes for centuries, but its composition is still unclear. The bioactivity of SPO highly depends on the techniques used for its processing. This study focused on the comprehensive lipidomics of SPO, especially on the ones derived from dry rendering, wet rendering, cold pressing, and ultrasound-assisted solvent extraction. METHODS: We performed lipid profiling of SPO acquired by different extraction methods using ultrahigh-performance liquid chromatography Q-Exactive Orbitrap mass spectrometry, and 17 classes of lipids (2 BMPs, 12 LysoPCs, 9 LysoPEs, 41 PCs, 24 PEs, 23 Plasmenyl-PCs, 10 Plasmenyl-PEs, 10 MGs, 63 DGs, 187 TGs, 2 MGDGs, 3 Cer[NDS]s, 22 Cer[NS]s, 2 GlcCer[NS]s, 14 SMs, 14 CEs, and 6 AcylCarnitines) were characterized. RESULTS: Fifty-five lipids were differentially altered (VIP > 1.5, p < 0.05) between the extraction techniques, which can be used as potential biomarkers to differentiate SPO extracted by various methods. Additionally, the contents of oleic acid and arachidic acid were abundant in all samples that may suggest their medicinal values and are conducive to in-depth research. CONCLUSIONS: These findings reveal the alterations of lipid profile and free fatty acid composition in SPO obtained with different extraction methods, providing a theoretical foundation for investigating its important components as functional factors in medicines and cosmetics.

Treasure-bowl style bifunctional site in cerium-tungsten hetero-clusters for superior solar-driven hydrogen production.

Electrochemical water splitting powered by renewable energy sources hold potential for clean hydrogen production. However, there is still persistent challenges such as low solar-to-hydrogen conversion efficiency and sluggish oxygen evolution reactions. Here, we address the poor kinetics by studying and strengthening the coupling between Ce and W, and concurrently establishing Ce-W bi-atomic clusters on P,N-doped carbon (WN/WC-CeO2-x@PNC) with a "treasure-bowl" style. The bifunctional active sites are established using a novel and effective self-sacrificial strategy involving in situ induced defect formation. In addition, by altering the coupling of the W(d)-N(p) and W(d)-Ce(f) orbitals in the WN/WC-CeO2-x supramolecular clusters, we are able to disrupt the linear relationship between the binding energies of reaction intermediates, a key to obtain high catalytic performance for transition metals. Through the confinement of the WN/WC-CeO2-x composite hetero-clusters within the sub-nanometre spaces of hollow nano-bowl-shaped carbon reactors, a stable and efficient hydrogen production via water electrolysis could be achieved. When assembled together with a solar GaAs triple junction solar cell, a solar-to-hydrogen conversion efficiency of 18.92% in alkaline media could be realized. We show that the key to establish noble metal free catalysts with high efficiency lies in the fine-tuning of the metal-metal interface, forming regions with near optimal adsorption energies for the reaction intermediates participating in water electrolysis.

Tumor-oriented and chemo-photothermal nanoplatform capable of sensitizing chemotherapy and ferroptosis against osteosarcoma metastasis.

The clinical use of chemotherapy for refractory osteosarcoma (OS) is limited due to its multiorgan toxicity. To overcome this challenge, new dosage forms and combination treatments, such as phototherapy, are being explored to improve targeted delivery and cytocompatibility of chemotherapeutic agents. In addition, inducing ferroptosis in iron-rich tumors could be a promising strategy to enhance OS therapy. In this study, a novel formulation was developed using natural biological H-ferritin (HFn) encapsulating the photosensitizer IR-780 and the chemotherapy drug gemcitabine (Gem) for OS-specific targeted therapy (HFn@Gem/IR-780 NPs). HFn@Gem/IR-780 NPs were designed to specifically bind and internalize into OS cells by interacting with transferrin receptor 1 (TfR1) which is overexpressed on the surface of OS cell membranes. The Gem and IR-780 were then released responsively under mildly acidic conditions in tumors. HFn@Gem/IR-780 NPs achieved cascaded antitumor therapeutic efficacy through the combination of chemotherapy and phototherapy under near-infrared irradiation in vitro and in vivo. Importantly, HFn@Gem/IR-780 NPs demonstrated excellent safety profile with significantly decreased drug exposure to normal organs, indicating its potential for reducing systemic toxicity. Thus, utilizing HFn as a vehicle to encapsulate highly effective antitumor drugs provides a promising approach for the treatment of OS metastasis and relapse.

Real-Time Monitoring of Tyrosine Hydroxylase Activity with a Ratiometric Fluorescent Probe.

Parkinson's disease (PD) represents the second most widespread neurodegenerative disease, and early monitoring and diagnosis are urgent at present. Tyrosine hydroxylase (TH) is a key enzyme for producing dopamine, the levels of which can serve as an indicator for assessing the severity and progression of PD. This renders the specific detection and visualization of TH a strategically vital way to meet the above demands. However, a fluorescent probe for TH monitoring is still missing. Herein, three rationally designed wash-free ratiometric fluorescent probes were proposed. Among them, TH-1 exhibited ideal photophysical properties and specific dual-channel bioimaging of TH activity in SH-SY5Y nerve cells. Moreover, the probe allowed for in vivo imaging of TH activity in zebrafish brain and living striatal slices of mice. Overall, the ratiometric fluorescent probe TH-1 could serve as a potential tool for real-time monitoring of PD in complex biosystems.

C3N5-based nanomaterials and their applications in heterogeneous catalysts, energy harvesting, and environmental remediation.

Over the past few decades, the global reliance on fossil fuels and the exponential growth of human population have escalated global energy consumption and environmental issues. To tackle these dual challenges, metal catalysts, in particular precious metal ones, have emerged as pivotal players in the fields of environment and energy. Among the numerous metal-free and organic catalyst materials, C3N5-based materials have a major advantage over their carbon nitride (CxNy) counterparts owing to the abundant availability of raw materials, non-toxicity, non-hazardous nature, and exceptional performance. Although significant efforts have been dedicated to synthesising and optimising the applicable properties of C3N5-based materials in recent years, a comprehensive summary of the immediate parameters of this promising material is still lacking. Given the rapid development of C3N5-based materials, a timely review is essential for staying updated on their strengths and weaknesses across various applications, as well as providing guidance for designing efficient catalysts. In this study, we present an extensive overview of recent advancements in C3N5-based materials, encompassing their physicochemical properties, major synthetic methods, and applications in photocatalysis, electrocatalysis, and adsorption, among others. This systematic review effectively summarises both the advantages and shortcomings associated with C3N5-based materials for energy and environmental applications, thus offering researchers focussed on CxNy-materials an in-depth understanding of those based on C3N5. Finally, considering the limitations and deficiencies of C3N5-based materials, we have proposed enhancement schemes and strategies, while presenting personal perspectives on the challenges and future directions for C3N5. Our ultimate aim is to provide valuable insights for the research community in this field.

Internal Vanadium Doping and External Modification Design of P2-Type Layered Mn-Based Oxides as Competitive Cathodes toward Sodium-Ion Batteries.

P2-type layered manganese-based oxides have attracted considerable interest as economical, cathode materials with high energy density for sodium-ion batteries (SIBs). Despite their potential, these materials still face challenges related to sluggish kinetics and structural instability. In this study, a composite cathode material, Na0.67Ni0.23Mn0.67V0.1O2@Na3V2O2(PO4)2F was developed by surface-coating P2-type Na0.67Ni0.23Mn0.67V0.1O2 with a thin layer of Na3V2O2(PO4)2F to enhance both the electrochemical sodium storage and material air stability. The optimized Na0.67Ni0.23Mn0.67V0.1O2@5wt %Na3V2O2(PO4)2F exhibited a high discharge capacity of 176 mA h g-1 within the 1.5-4.1 V range at a low current density of 17 mA g-1. At an increased current density of 850 mA g-1 within the same voltage window, it still delivered a substantial initial discharge capacity of 112 mAh g-1. These findings validate the significant enhancement of ion diffusion capabilities and rate performance in the P2-type Na0.67Ni0.33Mn0.67O2 material conferred by the composite cathode.

High-efficiency electrocatalytic nitrite-to-ammonia conversion on molybdenum doped cobalt oxide nanoarray at ambient conditions.

Electrochemical conversion of nitrite (NO2-) contaminant to green ammonia (NH3) is a promising approach to achieve the nitrogen cycle. The slow kinetics of the complex multi-reaction process remains a serious issue, and there is still a need to design highly effective and selective catalysts. Herein, we report that molybdenum doped cobalt oxide nanoarray on titanium mesh (Mo-Co3O4/TM) acts as a catalyst to facilitate electroreduction of NO2- to NH3. Such a catalyst delivers an extremely high Faradaic efficiency of 96.9 % and a corresponding NH3 yield of 651.5 µmol h-1 cm-2 at -0.5 V with strong stability. Density functional theory calculations reveal that the introduction of Mo can induce the redistribution of electrons around Co atoms and further strengthen the adsorption of NO2-, which is the key to facilitating the catalytic performance. Furthermore, the assembled battery based on Mo-Co3O4/TM suggests its practical application value.

[Progress in treatment of high-grade spondylolisthesis].

Objective: To review the research progress in the treatment of high-grade spondylolisthesis (HS), in order to provide a reference for clinical treatment decision-making. Methods: The literature related to the treatment of HS at home and abroad in recent years was widely reviewed. The methods of conservative treatment, in situ fusion, and spondylolisthesis reduction were analyzed and summarized. Results: Surgical treatment is the main treatment of HS, but which method is the best is still controversial. The advantages, disadvantages, and applicability of various operations are also different, so individualized analysis is needed in clinic. Conclusion: The treatment plan of HS needs to be considered comprehensively according to the individual condition of the patient. It will be an important research direction to further compare the existing treatment methods and develop more safe and effective new technology.

Ru doped NiMoO4 nanoarray as a high-efficiency electrocatalyst for nitrite reduction to ammonia.

The electrocatalytic reduction of nitrite to recyclable ammonia (NH3) is essential to maintain nitrogen balance and meet growing energy requirements. Herein, we report that Ru doped honeycomb NiMoO4 nanosheet with copious oxygen vacancies grown on nickel foam substrate has been prepared by a facile hydrothermal synthesis and immersion process, which can act as an efficient electrocatalyst for NH3 synthesis by reduction of nitrite. By optimizing the concentration of RuCl3 solution, 0.01Ru-NiMoO4/NF possesses excellent NO2-RR performance with NH3 yield of 20249.17 ± 637.42 µg h-1 cm-2 at -0.7 V and FE of 95.56 ± 0.72 % at -0.6 V. When assembled into a Zn-NO2- battery, it provides a remarkable level of power density of 13.89 mW cm-2, outperforming the performance of virtually all previous reports. The efficient adsorption and activation of NO2- over Ru-doped NiMoO4 with oxygen vacancy have been verified by density functional theory calculations, as well as the possible reaction pathway.

Therapeutic factors and biomaterial-based delivery tools for degenerative intervertebral disc repair.

Intervertebral disc degeneration (IDD) is the main cause of low back pain (LBP), which significantly impacts global wellbeing and contributes to global productivity declines. Conventional treatment approaches, encompassing conservative and surgical interventions, merely serve to postpone the advancement of IDD without offering a fundamental reversal. Consequently, there is an urgent demand for an effective approach to prevent the progression of IDD. Recent investigations focusing on the treatment of IDD utilizing diverse bioactive substances integrated within various biomaterials have exhibited promising outcomes. Various bioactive substances, encompassing conventional small molecule drugs, small molecule nucleic acids, and cell therapies, exhibit distinct capacities for repairing IDD. Additionally, various biological material delivery systems, such as nano micelles, microspheres, and hydrogels, possess diverse biological and release characteristics. Consequently, these diverse materials and drugs hold promise for advancing the treatment of IDD. This article aims to provide a concise overview of the IDD process and investigate the research advancements in biomaterials and bioactive substances for IDD treatment, delving into their mechanisms.

Intraoperative Protection of Pharyngeal Autonomic Nerves: Preventing Dysphagia After Anterior Cervical Decompression and Fusion Surgery.

OBJECTIVE: The study aims to investigate whether intraoperative protection of the pharyngeal autonomic nerve can effectively reduce the incidence of postoperative dysphagia following anterior cervical decompression and fusion surgery (ACDF). METHODS: A retrospective analysis was conducted on 130 cases that underwent ACDF from January 2018 to June 2022 at our hospital. Divided into nonautonomic neuroprotection (NANP) group and autonomic neuroprotection group based on whether receive protective measures for the pharyngeal autonomic nerve during surgery. General data were recorded and compared between the 2 groups. Postoperative outcomes were evaluated using Neck Disability Index, Japanese Orthopaedics Association (JOA) score, and JOA improvement rate. The incidence and severity of postoperative dysphagia were assessed using Bazaz dysphagia assessment criteria and swallowing-quality of life questionnaire. RESULTS: There were no significant differences in general data (P > 0.05). The average operation time and intraoperative blood loss also showed no significant differences (P > 0.05). Both groups showed significant improvements in Neck Disability Index and JOA scores at all follow-up time points compared to preoperative scores (P < 0.01). The incidence of postoperative dysphagia in the autonomic neuroprotection group was significantly lower than that in the NANP group at all follow-up time points (P < 0.05). Both group showed a significant reduction in scores 3 days postoperatively compared to preoperative scores (P < 0.01), and the NANP group also showed significant reductions in scores at 3 month and 1 year postoperative follow-up time points compared to preoperative scores (P < 0.01). CONCLUSIONS: The adoption of pharyngeal autonomic nerve protective measures during ACDF can effectively lower the probability of postoperative dysphagia.

Channel-assisted cervical key hole technology combined with ultrasonic bone osteotome versus posterior percutaneous endoscopic cervical foraminotomy: a clinical retrospective study.

PURPOSE: The search for more effective and safe treatment methods for cervical spondylotic radiculopathy (CSR) has led to the rapid development and increasing popularity of minimally invasive posterior cervical foraminotomy (MI-PCF). This study aims to compare two important approaches for MI-PCF surgery: the channel-assisted cervical key hole technology combined with ultrasonic bone osteotome (CKH-UBO) and posterior percutaneous endoscopic cervical foraminotomy (PPECF). METHODS: Data from patients treated with single-level CKH-UBO (n = 35) or PPECF (n = 40) were analyzed. Clinical outcomes, including visual analogue scale (VAS) scores for neck and arm pain, Neck Disability Index (NDI), and modified Macnab criteria, were assessed preoperatively, as well as at three days, three months, and one year postoperatively. RESULTS: The percentages of patients with excellent and good outcomes were 97.14% and 92.5%, respectively. The average surgical time in the CKH-UBO group was significantly shorter than in the PPECF group (p < 0.001), while the average incision length in the PPECF group was significantly smaller than in the CKH-UBO group. There were no significant differences between the two groups in terms of blood loss, hospital stay, and clinical outcomes at three days, three months, and 12 months postoperatively. CONCLUSION: CKH-UBO can achieve the same surgical outcomes as PPECF for the treatment of CSR. However, CKH-UBO saves more time but requires patients to undergo larger incisions.

Regulating inflammation and apoptosis: A smart microgel gene delivery system for repairing degenerative nucleus pulposus.

The progression of intervertebral disc degeneration (IDD) is attributed to the gradual exacerbation of cellular apoptosis and impaired extracellular matrix (ECM) synthesis, both of which are induced by progressive inflammation. Therefore, it is crucial to address the inflammatory microenvironment and rectify the excessive apoptosis of nucleus pulposus cells (NPCs) to achieve intervertebral disc (IVD) regeneration. In this study, we devised a smart microgel gene delivery system that incorporates functionalized gene nanoparticles (NPs) for the purpose of IVD regeneration. siGrem1 was loaded into the NPs to enhance their antiapoptotic ability and protective effects. Furthermore, the encapsulation of HADA further endows the NPs (referred to as HSGN) with targeted delivery and anti-inflammatory effects, as well as reactive oxygen species (ROS) scavenging capacities. To create an microenvironment-responsive microgel system, phenylboronic acid-functionalized microspheres (referred to as M.S.) were fabricated and dynamically loaded with the HSGN. This microgel system (MHSGN), which is highly biocompatible, enables the sustained release of siGrem1, effectively modulating inflammation, scavenging ROS, and alleviating apoptosis in NPCs. These multifunctional capabilities promote the restoration of metabolic homeostasis within the nucleus pulposus ECM, ultimately leading to delayed IDD.

Manipulating the crystal plane angle within the primary particle arrangement for the radial ordered structure in a Ni-rich cathode.

Ni-rich cathodes with a radial ordered microstructure have been proved to enhance materials' structural stability. However, the construction process of radial structures has not yet been clearly elaborated. Herein, the formation process of radial structures induced by different doped elements has been systematically investigated. The advanced Electron Back Scatter Diffraction (EBSD) characterization reveals that W-doped materials are more likely to form a low-angle arrangement between crystal planes of the primary particles and exhibit twin growth during sintering than a B-doped cathode. The corresponding High Angle Annular Dark Field-Scanning Transmission Electron Microscopy (HAADF-STEM) analysis further proves that the twin growth induced by W doping can promote the migration of Li+. Simultaneously, the W-doped sample reduces the (003) plane surface energy and promotes the retention of the crystal plane, which can effectively alleviate the structural degradation caused by Li+ (de)intercalation. At a cut-off voltage of 4.6 V, the W-doped cathode displays a capacity retention rate of 94.1% after 200 cycles at 1C. This work unveils the influence of different element doping on the structure from the perspective of crystal plane orientation within primary particles and points out the importance of the exposure and orientation of the crystal plane of the particles.

Application and development of hydrogel biomaterials for the treatment of intervertebral disc degeneration: a literature review.

Low back pain caused by disc herniation and spinal stenosis imposes an enormous medical burden on society due to its high prevalence and refractory nature. This is mainly due to the long-term inflammation and degradation of the extracellular matrix in the process of intervertebral disc degeneration (IVDD), which manifests as loss of water in the nucleus pulposus (NP) and the formation of fibrous disc fissures. Biomaterial repair strategies involving hydrogels play an important role in the treatment of intervertebral disc degeneration. Excellent biocompatibility, tunable mechanical properties, easy modification, injectability, and the ability to encapsulate drugs, cells, genes, etc. make hydrogels good candidates as scaffolds and cell/drug carriers for treating NP degeneration and other aspects of IVDD. This review first briefly describes the anatomy, pathology, and current treatments of IVDD, and then introduces different types of hydrogels and addresses "smart hydrogels". Finally, we discuss the feasibility and prospects of using hydrogels to treat IVDD.

MOF-on-MOF-Derived Ultrafine Fe2P-Co2P Heterostructures for High-Efficiency and Durable Anion Exchange Membrane Water Electrolyzers.

The alkaline hydrogen evolution reaction (HER) in an anion exchange membrane water electrolyzer (AEMWE) is considered to be a promising approach for large-scale industrial hydrogen production. Nevertheless, it is severely hampered by the inability to operate tolerable HER catalysts consistently under low overpotentials at ampere-level current densities. Here, we develop a universal ligand-exchange (MOF-on-MOF) modulation strategy to synthesize ultrafine Fe2P and Co2P nanoparticles, which are well anchored on N and P dual-doped carbon porous nanosheets (Fe2P-Co2P/NPC). In addition, benefiting from the downshift of the d-band center and the interfacial Co-P-Fe bridging, the electron-rich P site is triggered, which induces the redistribution of electron density and the swapping of active centers, lowering the energy barrier of the HER. As a result, the Fe2P-Co2P/NPC catalyst only requires a low overpotential of 175 mV to achieve a current density of 1000 mA cm-2. The solar-driven water electrolysis system presents a record-setting and stable solar-to-hydrogen conversion efficiency of 20.36%. Crucially, the catalyst could stably operate at 1000 mA cm-2 over 1000 h in a practical AEMWE at an estimated cost of US$0.79 per kilogram of H2, which achieves the target (US$2 per kg of H2) set by the U.S. Department of Energy (DOE).

Clinical efficacy of minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF) in the treatment of II° lumbar isthmic spondylolisthesis: A retrospective cohort study.

Minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF) is not suitable for high-grade isthmic spondylolisthesis, whether MIS-TLIF can treat II° lumbar isthmic spondylolisthesis (IS) is still controversial. This retrospective cohort study compared the clinical efficacy of MIS-TLIF and open transforaminal lumbar interbody fusion (OPEN-TLIF) in the treatment of II° lumbar IS. From January 2017 to January 2023, 101 patients with II° lumbar IS were diagnosed in our hospital and underwent surgical treatment, of which 53 received MIS-TLIF surgery and 48 received OPEN-TLIF surgery. The operation time, blood loss and surgical complications were compared between the 2 groups. The pain, function, reduction rate and fusion rate of the patients were evaluated during follow-up. The amount of intraoperative blood loss, postoperative drainage, and postoperative hospital stay in the MIS-TLIF group were significantly lower than those in the OPEN-TLIF group were (P < .01). In the MIS-TLIF group, there were 1 case of dural sac injury and 3 cases of lower limb paralysis. The complication rate of MIS-TLIF was lower than the OPEN-TLIF group (P = .032). In the visual analog scale score of low back pain, the MIS-TLIF group was lower than the OPEN-TLIF group after operation and at the last follow-up. There were no significant differences in postoperative leg pain score, slippage rate, and fusion rate between the 2 groups. Compared with OPEN-TLIF, MIS-TLIF has the advantages of better low back pain relief, less trauma, less bleeding and faster recovery, and is worthy of clinical promotion.