RESUMEN
OBJECTIVE: The purpose of this study was to investigate the long-term consequences on the cervical spine after Anterior transcorporeal percutaneous endoscopy cervical discectomy (ATc-PECD) from the biomechanical standpoint. METHODS: A three-dimensional model of the normal cervical spine C2-T1 was established using finite element method. Subsequently, a disc degeneration model and degeneration with surgery model were constructed on the basis of the normal model. The same loading conditions were applied to simulate flexion, extension, lateral bending and axial rotation of the cervical spine. We calculated the cervical range of motion (ROM), intradiscal pressure, and intravertebral body pressure under different motions for observing changes in cervical spine biomechanics after surgery. At the same time, we combined the results of a long-term follow-up of the ATc-PECD, and used imaging methods to measure vertebral and disc height and cervical mobility, the Japanese Orthopaedic Association (JOA) score and visual analog scale (VAS) score were used to assess pain relief and neurological functional recovery. RESULTS: The long-term follow-up results revealed that preoperative JOA score, neck VAS score, hand VAS score, IDH, VBH, and ROM for patients were 9.49 ± 2.16, 6.34 ± 1.68, 5.14 ± 1.48, 5.95 ± 0.22 mm, 15.41 ± 1.68 mm, and 52.46 ± 9.36° respectively. It changed to 15.71 ± 1.13 (P < 0.05), 1.02 ± 0.82 (P < 0.05), 0.77 ± 0.76 (P < 0.05), 4.73 ± 0.26 mm (P < 0.05), 13.67 ± 1.48 mm (P < 0.05), and 59.26 ± 6.72° (P < 0.05), respectively, at 6 years postoperatively. Finite element analysis showed that after establishing the cervical spondylosis model, the overall motion range for flexion, extension, lateral bending, and rotation decreased by 3.298°, 0.753°, 3.852°, and 1.131° respectively. Conversely, after establishing the bone tunnel model, the motion range for these actions increased by 0.843°, 0.65°, 0.278°, and 0.488° respectively, consistent with the follow-up results. Moreover, analysis of segmental motion changes revealed that the increased cervical spine mobility was primarily contributed by the surgical model segments. Additionally, the finite element model demonstrated that bone tunneling could lead to increased stress within the vertebral bodies and intervertebral discs of the surgical segments. CONCLUSIONS: Long-term follow-up studies have shown that ATc-PECD has good clinical efficacy and that ATc-PECD can be used as a complementary method for CDH treatment. The FEM demonstrated that ATc-PECD can lead to increased internal stresses in the vertebral body and intervertebral discs of the operated segments, which is directly related to cervical spine degeneration after ATc-PECD.
Asunto(s)
Vértebras Cervicales , Discectomía Percutánea , Endoscopía , Análisis de Elementos Finitos , Desplazamiento del Disco Intervertebral , Rango del Movimiento Articular , Humanos , Vértebras Cervicales/cirugía , Vértebras Cervicales/diagnóstico por imagen , Desplazamiento del Disco Intervertebral/cirugía , Desplazamiento del Disco Intervertebral/fisiopatología , Desplazamiento del Disco Intervertebral/diagnóstico por imagen , Estudios de Seguimiento , Discectomía Percutánea/métodos , Endoscopía/métodos , Masculino , Persona de Mediana Edad , Adulto , Femenino , Descompresión Quirúrgica/métodos , Resultado del Tratamiento , Fenómenos Biomecánicos , Degeneración del Disco Intervertebral/cirugía , Degeneración del Disco Intervertebral/diagnóstico por imagenRESUMEN
BACKGROUND: Noncontiguous 2-level cervical disc herniation (NCT-CDH) is a common condition that often requires surgical intervention. In this study, we developed a surgical approach for the treatment of NCT-CDH using anterior percutaneous full-endoscopic single incision through the vertebral body. We provide a brief overview of its safety, efficacy, and feasibility, along with a description of our relevant surgical experience. METHODS: A retrospective study was conducted, involving 30 patients who were followed up for at least 12 months. Preoperative and postoperative visual analog scale, Japanese Orthopedic Association scores, Nurick scores, intervertebral disc height, and modified Macnab criteria were recorded. Patients underwent regular radiological evaluations throughout the follow-up period. RESULTS: Postoperative computed tomography, magnetic resonance imaging, and X-ray examinations revealed bone tunnel healing, intact drilled vertebral bodies without collapse, adequate decompression of the spinal canal, and normal cervical mobility. There was a significant improvement in postoperative visual analog scale, Japanese Orthopedic Association scores, Nurick scores, and modified Macnab criteria compared to the preoperative values (P < 0.05). CONCLUSIONS: Our study revealed that the anterior percutaneous full-endoscopic transcorporeal with single-incision treatment for NCT-CDH is a safe and feasible surgical method. Therefore, it can be considered as a viable treatment option for patients with NCT-CDH.
Asunto(s)
Vértebras Cervicales , Desplazamiento del Disco Intervertebral , Humanos , Desplazamiento del Disco Intervertebral/cirugía , Desplazamiento del Disco Intervertebral/diagnóstico por imagen , Masculino , Femenino , Persona de Mediana Edad , Vértebras Cervicales/cirugía , Vértebras Cervicales/diagnóstico por imagen , Estudios Retrospectivos , Adulto , Estudios de Seguimiento , Resultado del Tratamiento , Anciano , Endoscopía/métodos , Discectomía Percutánea/métodosRESUMEN
OBJECTIVE: Full endoscopic techniques are being gradually introduced from single-segment cervical disc herniation surgery to two-segment cervical disc herniation surgery. However, there is no suitable full endoscopic treatment for mixed-type two-segment cervical disc herniation (MTCDH) in which one segment herniates in front of the spinal cord and the other segment herniates behind the spinal cord. Therefore, we introduce a new full endoscopic technique by combining an anterior transcorporeal approach and a posterior translaminar approach. In addition, we provide a brief description of its safety, efficacy, feasibility, and surgical points. METHODS: Thirty patients with MTCDH were given full endoscopic surgical treatment by a combined transcorporeal and transforaminal approach and were followed up for at least 12 months. RESULTS: Clinical assessment scales showed that the patient's symptoms and pain were significantly reduced postoperatively. Imaging results showed bony repair of the surgically induced bone defect and the cervical Cobb angle was increased. No serious complications occurred. CONCLUSION: This technique enables minimally invasive surgery to relieve the compression of the spinal cord by MTCDH. It avoids the fusion of the vertebral body for internal fixation, preserves the vertebral motion segments, avoids medical destruction of the cervical disc to the greatest extent possible, and expands the scope of adaptation of full endoscopic technology in cervical surgery.
Asunto(s)
Discectomía Percutánea , Desplazamiento del Disco Intervertebral , Humanos , Desplazamiento del Disco Intervertebral/diagnóstico por imagen , Desplazamiento del Disco Intervertebral/cirugía , Desplazamiento del Disco Intervertebral/complicaciones , Estudios de Seguimiento , Resultado del Tratamiento , Discectomía , Discectomía Percutánea/métodos , Endoscopía/métodos , Vértebras Cervicales/diagnóstico por imagen , Vértebras Cervicales/cirugía , Estudios RetrospectivosRESUMEN
OBJECTIVE: To evaluate long-term outcomes and surgical essentials of channel repair in endoscopic transcorporeal discectomy for cervical disc herniation. METHODS: From October 2019 to March 2020, 24 patients with cervical disc herniation underwent channel repair after percutaneous full-endoscopic anterior transcorporeal cervical discectomy. Five interventions were performed at C3-C4, 11 were performed at C4-C5, and 8 were performed at C5-C6. Clinical outcomes were evaluated by Neck Disability Index, Japanese Orthopaedic Association, and visual analog scale scores. Radiologic changes were evaluated with intervertebral disc height and drilled vertebral height. RESULTS: All procedures were completed with a mean operating time of 86.40 ± 8.19 minutes. Swollen neck was observed in 5 patients, which resolved within 2 hours. At the final follow-up, Neck Disability Index, Japanese Orthopaedic Association, and visual analog scale scores were improved significantly compared with preoperative assessments (P < 0.05); intervertebral disc height was decreased significantly (P < 0.05); and loss of drilled vertebral height was not significant (P > 0.05). All 24 bony channels disappeared by 3 months postoperatively. No other complications were observed. CONCLUSIONS: Percutaneous full-endoscopic anterior transcorporeal cervical discectomy with channel repair offers a minimally invasive and effective treatment option for patients with cervical disc herniation. This technique demonstrates favorable clinical outcomes, including preservation of cervical spine mobility and minimal complications. Although there was a significant loss of intervertebral disc height, no vertebral collapse occurred. Strict adherence to surgical indications and precautions is crucial for successful outcomes. Further research and long-term studies are required to validate the efficacy and safety of this approach in a larger patient population.
Asunto(s)
Discectomía Percutánea , Desplazamiento del Disco Intervertebral , Humanos , Desplazamiento del Disco Intervertebral/diagnóstico por imagen , Desplazamiento del Disco Intervertebral/cirugía , Desplazamiento del Disco Intervertebral/complicaciones , Estudios de Seguimiento , Endoscopía/métodos , Discectomía , Cuello/cirugía , Discectomía Percutánea/métodos , Resultado del Tratamiento , Vértebras Cervicales/diagnóstico por imagen , Vértebras Cervicales/cirugía , Estudios RetrospectivosRESUMEN
3D nanocake-like Au-MXene and Au pallet (Au-MXene/AuP) nanocomposite-modified screen-printed carbon electrodes (SPCEs) were utilized to construct an ultrasensitive label-free electrochemical aptasensor through a self-assembly procedure for trace paraquat (PQ) residue detection. Benefiting from the excellent electrochemical (EC) performances (e.g., high conductivity and large surface area) of Au-MXene nanocomposites and AuP substrate, the developed Apt/Au-MXene/AuP/SPCE-based EC aptasensor displayed excellent specificity and anti-interference ability, good repeatability, and stability. A linear relationship between the log value of the change in current intensity [lg (ΔI)] and the log value of the concentration of PQ [lg (CPQ)] was obtained in the range 0.05-1000 ng/mL. The limit of detection was 0.028 ng/mL, and the sensitivity was 255.5 µA/(µM·cm2). Practical applications in malt and mint samples confirmed the accuracy of the EC aptasensor in complex matrices for PQ detection, providing a universal analytical tool for other trace pesticides in different food samples by simply replacing the corresponding aptamers.