The complex, tri-chlorido-(1,4,11-tri-aza-8-azonia-tetra-cyclo-[6.6.2.04,16.011,15]hexa-decane 1-oxide-κO)zinc(II) monohydrate, [ZnCl3(C12H23N4O)]·H2O, (I), has monoclinic symmetry (space group P21/n) at 120â K. The zinc(II) center adopts a slightly distorted tetra-hedral coordination geometry and is coordinated by three chlorine atoms and the oxygen atom of the oxidized tertiary amine of the tetra-cycle. The amine nitro-gen atom, inside the ligand cleft, is protonated and forms a hydrogen bond to the oxygen of the amine oxide. Additional hydrogen-bonding inter-actions involve the protonated amine, the water solvate oxygen atom, and one of the chloro ligands.
Although iron is a bio-essential metal, dysregulated iron acquisition and metabolism result in production of reactive oxygen species (ROS) due to the Fenton catalytic reaction, which activates ferroptotic cell death pathways. The lipophilic Fe(III)-chelator chlorquinaldol (L; i.e., 5,7-dichloro-8-hydroxy-2-methylquinoline) strongly favors the formation of a highly stable binuclear Fe(III) complex [(L2Fe)2(µ-O)] (1) that can mimic the function of the Fe(III)-transferrin complex in terms of the strong binding to Fe(III) and facile release of Fe(II) when the metal center is reduced. It should be noted that the cellular uptake of 1 is not transferrin receptor-mediated but enhanced by the high lipophilicity of chlorquinaldol. Once 1 is transported across the cell membrane, Fe(III) can be reduced by ferric reductase or other cellular antioxidants to be released as Fe(II), which triggers the Fenton catalytic reaction, thus harnessing the anticancer activity of iron. As the result, this transferrin-inspired iron-delivery strategy significantly reduces the cytotoxicity of 1 in normal human embryonic kidney cells (HEK 293) and the hemolytic activity of 1 in human red blood cells (hRBCs), giving rise to the unique tumor-specific anticancer activity of this Fe(III) complex.
Chlorquinaldol , Ferroptosis , Humans , Iron/metabolism , Transferrin/metabolism , Chlorquinaldol/metabolism , HEK293 Cells , Cell Membrane/metabolism , Metals/metabolism , Ferric Compounds/metabolism , Ferrous Compounds/metabolism
Solid-state photoreactions are generally controlled by the rigid and ordered nature of crystals. Herein, the solution and solid-state photoreactivities of carbonylbis(4,1-phenylene)dicarbonazidate (1) were investigated to elucidate the solid-state reaction mechanism. Irradiation of 1 in methanol yielded primarily the corresponding amine, whereas irradiation in the solid state gave a mixture of photoproducts. Laser flash photolysis in methanol showed the formation of the triplet ketone (TK) of 1 (τ â¼ 99 ns), which decayed to triplet nitrene 31N (τ â¼ 464 ns), as assigned by comparison to its calculated spectrum. Laser flash photolysis of a nanocrystalline suspension and diffuse reflectance laser flash photolysis also revealed the formation of TK of 1 (τ â¼ 106 ns) and 31N (τ â¼ 806 ns). Electron spin resonance spectroscopy and phosphorescence measurements further verified the formation of 31N and the TK of 1, respectively. In methanol, 31N decays by H atom abstraction. However, in the solid state, 31N is sufficiently long lived to thermally populate its singlet configuration (11N). Insertion of 11N into the phenyl ring to produce oxazolone competes with 31N cleavage to form a radical pair. Notably, 1 did not exhibit photodynamic behavior, likely because the photoreaction occurs only on the crystal surfaces.
Despite the recent advancements of Cu catalysis for the cross-coupling of alkyl electrophiles and the frequently proposed involvement of alkyl-Cu(III) complexes in such reactions, little is known about the reactivity of these high-valent complexes. Specifically, although the reversible interconversion between an alkyl-CuIII complex and an alkyl radical/CuII pair has been frequently proposed in Cu catalysis, direct observation of such steps in well-defined CuIII complexes remains elusive. In this study, we report the synthesis and investigation of alkyl-CuIII complexes, which exclusively undergo a Cu-C homolysis pathway to generate alkyl radicals and CuII species. Kinetic studies suggest a bond dissociation energy of 28.6 kcal/mol for the CuIII-C bonds. Moreover, these four-coordinate complexes could be converted to a solvated alkyl-CuIII-(CF3)2, which undergoes highly efficient C-CF3 bond-forming reductive elimination even at low temperatures (-4 °C). These results provide strong support for the reversible recombination of alkyl radicals with CuII to form alkyl-CuIII species, an elusive step that has been proposed in Cu-catalyzed mechanisms. Furthermore, our work has demonstrated that the reactivity of CuIII complexes could be significantly influenced by subtle changes in the coordination environment. Lastly, the observation of the highly reactive neutral alkyl-CuIII-(CF3)2 species (or with weakly bound solvent molecules) suggests they might be the true intermediates in many Cu-catalyzed trifluoromethylation reactions.
The PPP-ligated iron complexes, cis-(iPrPPRP)FeH2(CO) [iPrPPRP = (o-iPr2PC6H4)2PR (R = H or Me)], catalyze the dehydrogenation of formic acid to carbon dioxide but lose their catalytic activity over time. This study focuses on the analysis of the species formed from the degradation of cis-(iPrPPMeP)FeH2(CO) over its course of catalyzing the dehydrogenation reaction. These degradation products include species both soluble and insoluble in the reaction medium. The soluble component of the decomposed catalyst is a mixture of cis-[(iPrPPMeP)FeH(CO)2][(HCO2)(HCO2H)x], protonated iPrPPMeP, and oxidation products resulting from adventitious O2. The precipitate is solvated Fe(OCHO)2. Further mechanistic investigation suggests that cis-[(iPrPPMeP)FeH(CO)2][(HCO2)(HCO2H)x] displays diminished but measurable catalytic activity, likely through the displacement of a CO ligand by the formate ion. The formation of Fe(OCHO)2 along with the dissociation of iPrPPMeP is responsible for the eventual loss of catalytic activity.
Twenty novel Mn, Fe, and Cu complexes of ethylene cross-bridged tetraazamacrocycles with potentially copolymerizable allyl and benzyl pendant arms were synthesized and characterized. Multiple X-ray crystal structures demonstrate the cis-folded pseudo-octahedral geometry forced by the rigidifying ethylene cross-bridge and show that two cis coordination cites are available for interaction with substrate and oxidant. The Cu complexes were used to determine kinetic stability under harsh acidic and high-temperature conditions, which revealed that the cyclam-based ligands provide superior stabilization with half-lives of many minutes or even hours in 5 M HCl at 50-90 °C. Cyclic voltammetry studies of the Fe and Mn complexes reveal reversible redox processes indicating stabilization of Fe2+/Fe3+ and Mn2+/Mn3+/Mn4+ oxidation states, indicating the likelihood of catalytic oxidation for these complexes. Finally, dye-bleaching experiments with methylene blue, methyl orange, and rhodamine B demonstrate efficient catalytic decolorization and allow selection of the most successful monomeric catalysts for copolymerization to produce future heterogeneous water purification materials.
The judicious selection of 5,7-dibromo-2-methy-8-quinolinol (BQ) as a Mn(II) ionophore results in the synthesis of Mn(BQ)2(DMSO)2·DMSO (1), a potent metalloantibiotic with a dual antimicrobial mode of action against four different strains of Staphylococcus aurous (SA) bacteria (MIC = 0.625 µg mL-1). Additionally, 1 can overcome ciprofloxacin-resistance in methicillin-resistant SA bacteria.
Anti-Infective Agents , Dimethyl Sulfoxide , Ciprofloxacin/pharmacology , Ionophores , Staphylococcus
This work centers around the nickel complexes derived from two tetrahydrosalen-type proligands: N,N'-bis(2-hydroxybenzyl)-o-phenylenediamine (H2salophan) and N,N'-bis(2-hydroxy-3-methylbenzyl)-o-phenylenediamine (H2salophan_Me). The reaction of H2salophan with Ni(OAc)2·4H2O generates a dinuclear complex Ni2(Hsalophan)2(OAc)2 or Na[Ni2(salophan)2(OAc)] when NaOH is added to assist ligand deprotonation. The reaction of H2salophan_Me with Ni(OAc)2·4H2O, however, yields a mononuclear complex Ni(Hsalophan_Me)2. Unlike the corresponding salen-type nickel complexes, these tetrahydrosalen-type complexes are paramagentic and air sensitive (in solution). Oxidation by O2 or peroxides results in dehydrogenation of the ligand backbone to form the salen-type complexes.
Irradiation of p-methoxyazidobutyrophenone (1) in methanol yielded 2-(4-methoxyphenyl)-1-pyrroline (2) and several other photoproducts. However, in the presence of tris(trimethylsilyl)silane (TTMSS), 2 is formed selectively. Transient absorption and ESR spectroscopy verify that the irradiation of 1 forms triplet alkylnitrene 31N through intramolecular energy transfer from the triplet ketone (T1K). DFT calculations indicate that 31N abstracts H atoms from TTMSS but not methanol, which explains the selectivity. Thus, triplet alkylnitrenes can undergo selective reductive cyclization via H atom abstraction from TTMSS.
Ketones , Cyclization , Ketones/chemistry , Energy Transfer
Iron dihydride complexes are key intermediates in many iron-catalyzed reactions. Previous efforts to study molecules of this type have led to the discovery of a remarkably stable cis-FeH2 complex, which is supported by bis[2-(diisopropylphosphino)phenyl]phosphine (iPrPPHP) along with CO. In this work, the hydrogen on the central phosphorus has been replaced with a methyl group, and the corresponding iron carbonyl dichloride, hydrido chloride, and dihydride complexes have been synthesized. The addition of the methyl group favors the anti configuration for the Me-P-Fe-H moiety and the trans geometry for the H-Fe-CO motif, which is distinctively different from the iPrPPHP system. Furthermore, it increases the thermal stability of the dihydride complex, cis-(iPrPPMeP)Fe(CO)H2 (iPrPPMeP = bis[2-(diisopropylphosphino)phenyl]methylphosphine). The variations in stereochemistry and compound stability contribute greatly to the differences between the two PPP systems in reactions with PhCHO, CS2, and HCO2H.
Tetraazamacrocycles, cyclic molecules with four nitrogen atoms, have long been known to produce highly stable transition metal complexes. Cross-bridging such molecules with two-carbon chains has been shown to enhance the stability of these complexes even further. This provides enough stability to use the resulting compounds in applications as diverse and demanding as aqueous, green oxidation catalysis all the way to drug molecules injected into humans. Although the stability of these compounds is believed to result from the increased rigidity and topological complexity imparted by the cross-bridge, there is insufficient experimental data to exclude other causes. In this study, standard organic and inorganic synthetic methods were used to produce unbridged dibenzyl tetraazamacrocycle complexes of Co, Ni, Cu, and Zn that are analogues of known cross-bridged tetraazamacrocycles and their transition metal complexes to allow direct comparison of molecules that are identical except for the cross-bridge. The syntheses of the known tetraazamacrocycles and the new transition metal complexes were successful with high yields and purity. Initial chemical characterization of the complexes was conducted by UV-Visible spectroscopy, while cyclic voltammetry showed more marked differences in electronic properties from bridged versions. Direct comparison studies of the unbridged and bridged compounds' kinetic stabilities, as demonstrated by decomposition using high acid concentration and elevated temperature, showed that the cyclen-based complex stability did not benefit from cross-bridging. This is likely due to poor complementarity with the Cu2+ ion while cyclam-based complexes benefited greatly. We conclude that ligand-metal complementarity must be maintained in order for the topological and rigidity constraints imparted by the cross-bridge to contribute significantly to complex robustness.
Coordination Complexes , Cyclams , Transition Elements , Humans , Coordination Complexes/chemistry , Molecular Structure , X-Rays , Transition Elements/chemistry , Ethylenes/chemistry , Crystallography, X-Ray
Selective and quantitative measurement of aqueous nitrate (NO3-) anion is achieved using solid [Pt(Cl-4-tpy)Cl]ClO4 salt (Cl-4-tpy = 4-chloro-2,2':6'2''-terpyridine), and as the salt supported on controlled porous glass. This detection method relies on the color change of the Pt(II) complex from yellow to red and intense luminescence response upon ClO4- exchange with NO3- due to concomitant enhancement of Ptâ¯Pt interactions. The spectroscopic response is highly selective for NO3- over a large range of halides and oxoanions.
PNP-pincer-stabilized iron carbonyl dihydride complexes are key intermediates in catalytic hydrogenation and dehydrogenation reactions; however, decomposition through these intermediates has been observed. This inspires the development of a PPP-pincer system that may show improved catalyst stability. In this work, bis[2-(diisopropylphosphino)phenyl]phosphine (or iPrPPHP) is used to react with FeCl2 under a carbon monoxide (CO) atmosphere to yield trans-(iPrPPHP)Fe(CO)Cl2. A subsequent reaction with NaBH4 produces syn/anti-(iPrPPHP)FeH(CO)Cl or cis,anti-(iPrPPHP)Fe(CO)H2, depending on the amount of NaBH4 employed. The cis-dihydride complex shows catalytic activity for the conversion of PhCHO to PhCH2OH (under H2) or PhCO2CH2Ph (under Ar). It also catalyzes the dehydrogenation of PhCH2OH to PhCHO and PhCO2CH2Ph, albeit with limited turnover numbers. A more efficient catalytic process is the dehydrogenation of formic acid to carbon dioxide (CO2), which can operate under additive-free conditions. Mechanistic investigation suggests that the cis-dihydride complex undergoes protonation with formic acid to release H2 while forming anti-(iPrPPHP)FeH(CO)(OCHO)·HCO2H, in which the CO ligand has shifted and the formate is hydrogen-bonded to formic acid. The hydrido formate complex loses CO2 under ambient conditions, completing the catalytic cycle by reforming the cis-dihydride complex.
Ethylene cross-bridged tetraazamacrocycles are known to produce kinetically stable transition metal complexes that can act as robust oxidation catalysts under harsh aqueous conditions. We have synthesized ligand analogs with single acetate pendant arms that act as pentadentate ligands to Mn, Fe, Co, Ni, Cu, and Zn. These complexes have been synthesized and characterized, including the structural characterization of four Co and Cu complexes. Cyclic voltammetry demonstrates that multiple oxidation states are stabilized by these rigid, bicyclic ligands. Yet, redox potentials of the metal complexes are modified compared to the "parent" ligands due to the pendant acetate arm. Similarly, gains in kinetic stability under harsh acidic conditions, compared to parent complexes without the pendant acetate arm, were demonstrated by a half-life seven times longer for the cyclam copper complex. Due to the reversible, high oxidation states available for the Mn and Fe complexes, the Mn and Fe complexes were examined as catalysts for the bleaching of three commonly used pollutant model dyes (methylene blue, methyl orange, and Rhodamine B) in water with hydrogen peroxide as oxidant. The efficient bleaching of these dyes was observed.
Coordination Complexes , Cyclams , Transition Elements , Coordination Complexes/chemistry , Crystallography, X-Ray , Ethylenes/chemistry , Ligands , Oxidation-Reduction
Solvent plays a vital role in the recrystallization process and resulting crystallinity of materials. This role is of such importance that it can control the stability and utility of materials. In this work, the inclusion of a solvent in the crystalline lattice, specifically water, drastically affects the overall stability of two platinum polymorphs. [Pt(tpy)Cl]BF4 (tpy = 2,2';6'2â³-terpyridine) crystallizes in three forms, red (1R) and blue (1B) polymorphs and a yellow nonsolvated form (2). 1R is the more stable of the two polymorphs, whereas 1B loses crystallinity upon dehydration at ambient conditions resulting in the formation of 2. Close examination of the solid-state extended structures of the two polymorphs reveals that 1R has a lattice arrangement that is more conducive to stronger intermolecular interactions compared to 1B, thereby promoting greater stability. In addition, these two polymorphs exhibit unique vapochromic responses when exposed to various solvents.
Organic molecules that contain alkyl-difluoromethyl moieties have received increased attention in medicinal chemistry, but their synthesis in a modular and late-stage fashion remains challenging. We report herein an efficient copper-catalyzed radical relay approach for the carbo-difluoromethylation of alkenes. This approach simultaneously introduces CF2H groups along with complex alkyl or aryl groups into alkenes with regioselectivity opposite to traditional CF2H radical addition. We demonstrate a broad substrate scope and a wide functional group compatibility. This scalable protocol is applied to the late-stage functionalization of complex molecules and the synthesis of CF2H analogues of bioactive molecules. Mechanistic studies and density functional theory calculations suggest a unique ligand effect on the reactivity of the Cu-CF2H species.
Tricarbonylrhenium(I)(α-diimine) complexes are of importance because of their strong cytotoxic and fluorescence properties. Syntheses of such complexes were achieved through a two-step process. First, the pentylcarbonato complexes, fac-(CO)3(α-diimine)ReOC(O)OC5H11 were synthesized through a microwave-assisted reaction of Re2(CO)10, α-diimine, 1-pentanol and CO2 in a few hours. Second, the pentylcarbonato complexes are treated with carboxylic, sulfonic and halo acids to obtain the corresponding carboxylato, sulfonato and halido complexes. This is the first example of conversion of Re2(CO)10 into a rhenium carbonyl complex through microwave-assisted reaction.
Iron hydrides supported by a pincer ligand of the type HN(CH2CH2PR2)2 (RPNHP) are versatile hydrogenation catalysts. Previous efforts have focused on using CO as an additional ligand to stabilize the hydride species. In this work, CO is replaced with isocyanide ligands, leading to the isolation of two different types of iron hydride complexes: (RPNHP)FeH(CNR')(BH4) (R = iPr, R' = 2,6-Me2C6H3, tBu; R = Cy, R' = 2,6-Me2C6H3) and [(iPrPNHP)FeH(CNtBu)2]X (X = BPh4, Br, or a mixture of Br and BH4). The neutral iron hydrides are capable of catalyzing the hydrogenation of PhCO2CH2Ph to PhCH2OH, although the activity is lower than for (iPrPNHP)FeH(CO)(BH4). The cationic iron hydrides are active hydrogenation catalysts only for more reactive carbonyl substrates such as PhCHO, and only when the NH and FeH hydrogens are syn to each other. The cationic species and their synthetic precursors [(iPrPNHP)FeBr(CNtBu)2]X (X = BPh4, Br) can have different configurations for the isocyanide ligands (cis or trans) and the H-N-Fe-H(Br) unit (syn or anti). Unlike tetraphenylborate, the bromide counterion participates in a hydrogen-bonding interaction with the NH group, which influences the relative stability of the cis,anti and cis,syn isomers. These structural differences have been elucidated by X-ray crystallography, and the geometric isomerization processes have been studied by NMR spectroscopy.
Increased levels of nitrate (NO3-) in the environment can be detrimental to human health. Herein, we report a robust, cost-effective, and scalable, hybrid material-based colorimetric/luminescent sensor technology for rapid, selective, sensitive, and interference-free in situ NO3- detection. These hybrid materials are based on a square-planar platinum(II) salt [Pt(tpy)Cl]PF6 (tpy = 2,2';6',2â³-terpyridine) supported on mesoporous silica. The platinum salt undergoes a vivid change in color and luminescence upon exposure to aqueous NO3- anions at pH ≤ 0 caused by substitution of the PF6- anions by aqueous NO3-. This change in photophysics of the platinum salt is induced by a rearrangement of its crystal lattice that leads to an extended Pt···Pt···Pt interaction, along with a concomitant change in its electronic structure. Furthermore, incorporating the material into mesoporous silica enhances the surface area and increases the detection sensitivity. A NO3- detection limit of 0.05 mM (3.1 ppm) is achieved, which is sufficiently lower than the ambient water quality limit of 0.16 mM (10 ppm) set by the United States Environmental Protection Agency. The colorimetric/luminescence of the hybrid material is highly selective to aqueous NO3- anions in the presence of other interfering anions, suggesting that this material is a promising candidate for the rapid NO3- detection and quantification in practical samples without separation, concentration, or other pretreatment steps.
When exposed to UV light, single crystals of the vinyl azides 3-azido-1-phenylpropenone (1a), 3-azido-1-(4-methoxyphenyl)propenone (1b), and 3-azido-1-(4-chlorophenyl)propenone (1c) exhibit dramatic mechanical effects by cracking or bending with the release of N2. Mechanistic studies using laser flash photolysis, supported by quantum mechanical calculations, show that each of the vinyl azides degrades through a vinylnitrene intermediate. However, despite having very similar crystal packing motifs, the three compounds exhibit distinct photomechanical responses in bulk crystals. While the crystals of 1a delaminate and release gaseous N2 indiscriminately under paraffin oil, the crystals of 1b and 1c visibly expand, bend, and fracture, mainly along specific crystallographic faces, before releasing N2. The photochemical analysis suggests that the observed expansion is due to internal pressure exerted by the gaseous product in the crystal lattices of these materials. Lattice energy calculations, supported by nanoindentation experiments, show significant differences in the respective lattice energies. The calculations identify critical features in the crystal structures of 1b and 1c where elastic energy accumulates during gas release, which correspond to the direction of the observed cracks. This study highlights the hitherto untapped potential of photochemical gas release to elicit a photomechanical response and motility of photoreactive molecular crystals.
