RESUMEN
Understanding the impact of the relativistic motion of a chiral molecule on its optical response is a prime challenge for fundamental science, but it also has a direct practical relevance in our search for extraterrestrial life. To contribute to these significant developments, we describe a multi-scale computational framework that combines quantum chemistry calculations and full-wave optical simulations to predict the chiral optical response from molecules moving at relativistic speeds. Specifically, the effect of a relativistic motion on the transmission circular dichroism (TCD) of three life-essential biomolecules, namely, B-DNA, chlorophyll a, and chlorophyll b, is investigated. Inspired by previous experiments to detect interstellar chiral molecules, we assume that the molecules move between a stationary observer and a light source, and we study the rotationally averaged TCD as a function of the speed of the molecule.We find that the TCD spectrum that contains the signatures of the molecules shifts with increasing speed to shorter wavelengths, with the effects already being visible for moderate velocities.
RESUMEN
In the last few years, infrared reflection-absorption spectroscopy (IRRAS) has become a standard technique to study vibrational excitations of molecules. These investigations are strongly motivated by potential applications in monitoring chemical processes. For a better understanding of the adsorption mechanism of molecules on dielectrics, the polarization-dependence of an interaction of infrared light with adsorbates on dielectric surfaces is commonly used. Thus, the peak positions in absorption spectra could be different for s- and p-polarized light. This shift between the peak positions depends on both the molecule itself and the dielectric substrate. While the origin of this shift is well understood for infinite two-dimensional adsorbate layers, finite-size samples, which consist of 2D islands of a small number of molecules, have never been considered. Here, we present a study on polarization-dependent finite-size effects in the optical response of such islands on dielectric substrates. The study uses a multi-scale modeling approach that connects quantum chemistry calculations with Maxwell scattering simulations. We distinguish the optical response of a single molecule, a finite number of molecules, and a two-dimensional adsorbate layer. We analyze CO and CO2 molecules deposited on CeO2 and Al2O3 substrates. The evolution of the shift between the polarization-dependent absorbance peaks is first studied for a single molecule, which does not exhibit any shifting at all, and for finite molecular islands, where it increases with increasing island size, as well as for an infinite two-dimensional adsorbate layer. In the latter case, the agreement between the obtained results and the experimental IRRAS data and more traditional three/four-layer model theoretical studies supports the predictive power of the multi-scale approach.
RESUMEN
Nonlinear optics is essential for many recent photonic technologies. Here, a novel multi-scale approach is introduced to simulate the nonlinear optical response of molecular nanomaterials combining ab initio quantum-chemical and classical Maxwell-scattering computations. In this approach, the first hyperpolarizability tensor is computed with time-dependent density-functional theory and incorporated into a multi-scattering formalism that considers the optical interaction between neighboring molecules. Such incorporation is achieved by a novel object: the Hyper-Transition(T)-matrix. With this object at hand, the nonlinear optical response from single molecules and also from entire photonic devices can be computed, including the full tensorial and dispersive nature of the optical response of the molecules, as well as the optical interaction between different molecules as, for example, in the lattice of a molecular crystal. To demonstrate the applicability of the novel approach, the generation of a second-harmonic signal from a thin film of an Urea molecular crystal is computed and compared to more traditional simulations. Furthermore, an optical cavity is designed, which enhances the second-harmonic response of the molecular film up to more than two orders of magnitude. This approach is highly versatile and accurate and can be the working horse for the future exploration of nonlinear photonic molecular materials in structured photonic environments.
RESUMEN
TURBOMOLE is a highly optimized software suite for large-scale quantum-chemical and materials science simulations of molecules, clusters, extended systems, and periodic solids. TURBOMOLE uses Gaussian basis sets and has been designed with robust and fast quantum-chemical applications in mind, ranging from homogeneous and heterogeneous catalysis to inorganic and organic chemistry and various types of spectroscopy, light-matter interactions, and biochemistry. This Perspective briefly surveys TURBOMOLE's functionality and highlights recent developments that have taken place between 2020 and 2023, comprising new electronic structure methods for molecules and solids, previously unavailable molecular properties, embedding, and molecular dynamics approaches. Select features under development are reviewed to illustrate the continuous growth of the program suite, including nuclear electronic orbital methods, Hartree-Fock-based adiabatic connection models, simplified time-dependent density functional theory, relativistic effects and magnetic properties, and multiscale modeling of optical properties.
RESUMEN
The recent fabrication advances in nanoscience and molecular materials point toward a new era where material properties are tailored in silico for target applications. To fully realize this potential, accurate and computationally efficient theoretical models are needed for: a) the computer-aided design and optimization of new materials before their fabrication; and b) the accurate interpretation of experiments. The development of such theoretical models is a challenging multi-disciplinary problem where physics, chemistry, and material science are intertwined across spatial scales ranging from the molecular to the device level, that is, from ångströms to millimeters. In photonic applications, molecular materials are often placed inside optical cavities. Together with the sought-after enhancement of light-molecule interactions, the cavities bring additional complexity to the modeling of such devices. Here, a multi-scale approach that, starting from ab initio quantum mechanical molecular simulations, can compute the electromagnetic response of macroscopic devices such as cavities containing molecular materials is presented. Molecular time-dependent density-functional theory calculations are combined with the efficient transition matrix based solution of Maxwell's equations. Some of the capabilities of the approach are demonstrated by simulating surface metal-organic frameworks -in-cavity and J-aggregates-in-cavity systems that have been recently investigated experimentally, and providing a refined understanding of the experimental results.
RESUMEN
We have discovered a dual (i. e., soft and hard) Lewis acidity of alumina that enables rapid one-pot π-extension through the activation of terminal alkynes followed by C-F activation. The tandem reaction introduces an acenaphthene fragment - an essential moiety of geodesic polyarenes. This reaction provides quick access to elusive non-alternant polyarenes such as π-extended buckybowls and helicenes through three-point annulation of the 1-(2-ethynyl-6-fluorophenyl)naphthalene moiety. The versatility of the developed method was demonstrated by the synthesis of unprecedented structural fragments of elusive geodesic graphene nanoribbons.
RESUMEN
We report a theoretical study of the adsorption of a set of small molecules (C2H2, CO, CO2, O2, H2O, CH3OH, C2H5OH) on the metal centers of the "copper paddle-wheel"-a key structural motif of many MOFs. A systematic comparison between DFT of different rungs, single-reference post-HF methods (MP2, SOS-MP2, MP3, DLPNO-CCSD(T)), and multi-reference approaches (CASSCF, DCD-CAS(2), NEVPT2) is performed in order to find a methodology that correctly describes the complicated electronic structure of paddle-wheel structure together with a reasonable description of non-covalent interactions. Apart from comparison with literature data (experimental values wherever possible), benchmark calculations with DLPNO-MR-CCSD were also performed. Despite tested methods show qualitative agreement in the majority of cases, we showed and discussed reasons for quantitative differences as well as more fundamental problems of specific cases.
RESUMEN
The design and preparation of synthetic binders (SBs) applicable for small biomolecule sensing in aqueous media remains very challenging. SBs designed by the lock-and-key principle can be selective for their target analyte but usually show an insufficient binding strength in water. In contrast, SBs based on symmetric macrocycles with a hydrophobic cavity can display high binding affinities but generally suffer from indiscriminate binding of many analytes. Herein, a completely new and modular receptor design strategy based on microporous hybrid materials is presented yielding zeolite-based artificial receptors (ZARs) which reversibly bind the neurotransmitters serotonin and dopamine with unprecedented affinity and selectivity even in saline biofluids. ZARs are thought to uniquely exploit both the non-classical hydrophobic effect and direct non-covalent recognition motifs, which is supported by in-depth photophysical, and calorimetric experiments combined with full atomistic modeling. ZARs are thermally and chemically robust and can be readily prepared at gram scales. Their applicability for the label-free monitoring of important enzymatic reactions, for (two-photon) fluorescence imaging, and for high-throughput diagnostics in biofluids is demonstrated. This study showcases that artificial receptor based on microporous hybrid materials can overcome standing limitations of synthetic chemosensors, paving the way towards personalized diagnostics and metabolomics.
Asunto(s)
Neurotransmisores , Agua , Colorantes , DopaminaRESUMEN
Liquid-phase, quasi-epitaxial growth is used to stack asymmetric, dipolar organic compounds on inorganic substrates, permitting porous, crystalline molecular materials that lack inversion symmetry. This allows material fabrication with built-in electric fields. A new programmed assembly strategy based on metal-organic frameworks (MOFs) is described that facilitates crystalline, noncentrosymmetric space groups for achiral compounds. Electric fields are integrated into crystalline, porous thin films with an orientation normal to the substrate. Changes in electrostatic potential are detected via core-level shifts of marker atoms on the MOF thin films and agree with theoretical results. The integration of built-in electric fields into organic, crystalline, and porous materials creates possibilities for band structure engineering to control the alignment of electronic levels in organic molecules. Built-in electric fields may also be used to tune the transfer of charges from donors loaded via programmed assembly into MOF pores. Applications include organic electronics, photonics, and nonlinear optics, since the absence of inversion symmetry results in a clear second-harmonic generation signal.
RESUMEN
Electrospray ionization of phenyl argentates formed by transmetalation reactions between phenyl lithium and silver cyanide provides access to the argentate aggregates, [AgnPhn+1]-, which were individually mass-selected for n = 2-8 in order to generate their gas-phase Ultraviolet Photodissociation (UVPD) "action" spectra over the range 304-399 nm. A strong bathochromic shift in optical spectra was observed with increasing size/n. Theoretical calculations allowed the assignment of the experimental UVPD spectra to specific isomer(s) and provided crucial insights into the transition from the 2D to 3D structure of the metallic component with the increasing size of the complex. The [AgnPhn+1]- aggregates contain neither pronounced metallic cluster properties nor ligated metallic cluster features and are thus not superatom complexes. They therefore represent novel organometallic characteristics built from Ag2Ph subunits.
RESUMEN
Colloidal protein-protein interactions (PPIs) of attractive and repulsive nature modulate the solubility of proteins, their aggregation, precipitation and crystallization. Such interactions are very important for many biotechnological processes, but are complex and hard to control, therefore, difficult to be understood in terms of measurements alone. In diluted protein solutions, PPIs can be estimated from the osmotic second virial coefficient, B22, which has been calculated using different methods and levels of theory. The most popular approach is based on the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory and its extended versions, i.e. xDLVO. Despite much efforts, these models are not fully quantitative and must be fitted to experiments, which limits their predictive value. Here, we report an extended xDLVO-CG model, which extends existing models by a coarse-grained representation of proteins and the inclusion of an additional ion-protein dispersion interaction term. We demonstrate for four proteins, i.e. lysozyme (LYZ), subtilisin (Subs), bovine serum albumin (BSA) and immunoglobulin (IgG1), that semi-quantitative agreement with experimental values without the need to fit to experimental B22 values. While most likely not the final step in the nearly hundred years of research in PPIs, xDLVO-CG is a step towards predictive PPIs calculations that are transferable to different proteins.
Asunto(s)
Inmunoglobulinas/química , Muramidasa/química , Albúmina Sérica Bovina/química , Subtilisina/química , Animales , Bovinos , Coloides/química , Humanos , Modelos Moleculares , Muramidasa/metabolismo , Unión Proteica , SolubilidadRESUMEN
Lanthanide-based crystalline coatings have a great potential for energy-conversion devices, but until now luminescent surface-anchored materials were difficult to fabricate. Thin films, called lanthanides surface-mounted metal-organic frameworks (SURMOFs) with tetrasubstituted halide (fluorine, chlorine, and bromine) terephthalic acid derivative linkers as a basic platform for optical devices, exhibit a high quantum yield of fluorescence visible to the naked eyes under ambient light. We show that we can tune the luminescent properties in thin films by halide substitution, which affords control over the molecular structure of the material. We rationalize the mechanism for the modulation of the photophysical properties by "antenna effect", which controls the energy transfer and quantum yields using experimental and theoretical techniques for chelated lanthanides as a function of the type of atom substitutions at the phenyl rings and the resulting dihedral angle between phenyl rings in the linkers and carboxylate groups.
RESUMEN
Interest in electroluminescence of single molecules is stimulated by the prospect of possible applications in novel light emitting devices. Recent studies provide valuable insights into the mechanisms leading to single molecule electroluminescence. Concrete information on how to boost the intensity of the emitted light, however, is rare. By combining scanning tunnelling microscopy (STM) and quantum chemical calculations, we show that the light emission efficiencies of an individual hydrogen-phthalocyanine molecule can be increased by a factor of ≈19 upon charging. This boost in intensity can be explained by the development of a vertical dipole moment normal to the substrate facilitating out-coupling of the local excitation to the far field. As this effect is not related to the specific nature of hydrogen-phthalocyanine, it opens up a general way to increase light emission from molecular junctions.
RESUMEN
In molecular solids, the intense photoluminescence (PL) observed for solvated dye molecules is often suppressed by nonradiative decay processes introduced by excitonic coupling to adjacent chromophores. We have developed a strategy to avoid this undesirable PL quenching by optimizing the chromophore packing. We integrated the photoactive compounds into metal-organic frameworks (MOFs) and tuned the molecular alignment by introducing adjustable "steric control units" (SCUs). We determined the optimal alignment of core-substituted naphthalenediimides (cNDIs) to yield highly emissive J-aggregates by a computational analysis. Then, we created a large library of handle-equipped MOF chromophoric linkers and computationally screened for the best SCUs. A thorough photophysical characterization confirmed the formation of J-aggregates with bright green emission, with unprecedented photoluminescent quantum yields for crystalline NDI-based materials. This data demonstrates the viability of MOF-based crystal engineering approaches that can be universally applied to tailor the photophysical properties of organic semiconductor materials.
RESUMEN
We report facile synthesis of the Au10(SG)10 nanoclusters, where SG stands for glutathione, found to be promising as a new class of radiosensitizers for cancer radiotherapy. The homoleptic catenane structure with two Au5SG5 interconnected rings, among different isomer structures, gives the best agreement between theoretical and experimental optical spectra and XRD patterns. This catenane structure exhibits a centrosymmetry-broken structure, resulting in enhanced second harmonic response and new characteristic circular dichroism signals in the spectral region of 250-400 nm. This is the first determination of the nonlinear optical properties of a ligated cluster with an equal Au-to-ligand ratio, thus without a metallic core and therefore zero confined electrons. Insight into the nonlinear and chiroptical efficiencies arising from interplay between structural and electronic properties is provided by the TD-DFT approach.
RESUMEN
We report a combined experimental and theoretical study of the two-photon absorption and excited emission properties of monodisperse ligand stabilized Ag11, Ag15 and Ag31 nanoclusters in aqueous solutions. The nanoclusters were synthesized using a cyclic reduction under oxidative conditions and separated by vertical gel electrophoresis. The two-photon absorption cross-sections of these protected noble metal nanoclusters measured within the biologically attractive 750-900 nm window are several orders of magnitude larger than that reported for commercially available standard organic dyes. The two-photon excited fluorescence spectra are also presented for excitation wavelengths within the same excitation spectral window. They exhibit size-tunability. Because the fundamental photophysical mechanisms underlying these multiphoton processes in ligand protected clusters with only a few metal atoms are not fully understood yet, a theoretical model is proposed to identify the key driving elements. Elements that regulate the dipole moments and the nonlinear optical properties are the nanocluster size, its structure and the charge distribution on both the metal core and the bound ligands. We coined this new class of NLO materials as "Ligand-Core" NLO-phores.
RESUMEN
Metalloenzymes preorganize the reaction environment to steer substrate(s) along the required reaction coordinate. Here, we show that phosphine ligands selectively facilitate protonation of binuclear silver hydride cations, [LAg2(H)](+) by optimizing the geometry of the active site. This is a key step in the selective, catalysed extrusion of carbon dioxide from formic acid, HO2CH, with important applications (for example, hydrogen storage). Gas-phase ion-molecule reactions, collision-induced dissociation (CID), infrared and ultraviolet action spectroscopy and computational chemistry link structure to reactivity and mechanism. [Ag2(H)](+) and [Ph3PAg2(H)](+) react with formic acid yielding Lewis adducts, while [(Ph3P)2Ag2(H)](+) is unreactive. Using bis(diphenylphosphino)methane (dppm) reshapes the geometry of the binuclear Ag2(H)(+) scaffold, triggering reactivity towards formic acid, to produce [dppmAg2(O2CH)](+) and H2. Decarboxylation of [dppmAg2(O2CH)](+) via CID regenerates [dppmAg2(H)](+). These gas-phase insights inspired variable temperature NMR studies that show CO2 and H2 production at 70 °C from solutions containing dppm, AgBF4, NaO2CH and HO2CH.
Asunto(s)
Dióxido de Carbono/química , Formiatos/química , Plata/química , Catálisis , Descarboxilación , Iones , Ligandos , Teoría Cuántica , Soluciones , Espectrofotometría Infrarroja , Espectrofotometría Ultravioleta , TermodinámicaRESUMEN
We report theoretical and experimental results on two-photon absorption (TPA) cross section of thiolated small silver cluster Ag15L11 exhibiting extraordinary large TPA in red. Our findings provide the responsible mechanism and allow proposing new classes of nanoclusters with large TPAs which are promising for biological and medical applications.
RESUMEN
The bis(diphenylphosphino)methane (L = Ph2PCH2PPh2) ligated silver deuteride nanocluster dication, [Ag10D8L6](2+), has been synthesised in the condensed phase via the reaction of bis(diphenylphosphino)methane, silver nitrate and sodium borodeuteride in the methanol : chloroform (1 : 1) mixed solvent system. The photoionisation and photofragmentation of this mass-selected cluster were studied using a linear ion trap coupled to the DESIRS VUV beamline of the SOLEIL Synchrotron. At 15.5 eV the main ionic products observed are [Ag10D8L5](2+), [Ag10D8L4](2+), [Ag10D8L6](3+)Ë, [Ag9D8L4](2+)Ë, and [AgL2](+). The later two products arise from fragmentation of [Ag10D8L6](3+)Ë. An analysis of the yields of these product ions as a function of the photon energy reveals the onset for the formation of [AgL2](+) and [Ag9D8L4](2+)Ë is around 2 eV higher than that for ionisation to produce [Ag10D8L5](3+)Ë. The onset of ionisation energy of [Ag10D8L6](2+) was determined to be 9.3 ± 0.3 eV from a fit of the yield of the product ion, [Ag10D8L6](3+)Ë, as a function of the VUV photon energy. DFT calculations at the RI-PBE/RECP-def2-SVP level of theory were carried out to search for a possible structure of the cluster and to estimate its vertical and adiabatic ionisation energies. The calculated lowest energy structure of the [Ag10D8L6](2+) nanocluster contains a symmetrical bicapped square antiprism as a silver core in which hydrides are located as a mix of triangular faces and edges. Four of the bisphosphines bind to the edges of the cluster core as bidentate ligands, the remaining two bisphosphines bind via a single phosphorus donor atom to each of the apical silver atoms. The DFT calculated adiabatic ionisation energy for this structure is 8.54 eV, in satisfactory agreement with experiment.
Asunto(s)
Derivados del Benceno/química , Deuterio/química , Metano/análogos & derivados , Compuestos Organofosforados/química , Plata/química , Gases/química , Iones/química , Modelos Moleculares , Fotólisis , Espectrometría de Masa por Ionización de Electrospray , Rayos UltravioletaRESUMEN
Multistage mass spectrometry and density functional theory (DFT) were used to characterise the small silver hydride nanocluster, [Ag3 H2 L](+) (where L=(Ph2 P)2 CH2 ) and its gas-phase unimolecular chemistry. Collision-induced dissociation (CID) yields [Ag2 HL](+) as the major product while laser-induced dissociation (LID) proceeds via H2 formation and subsequent release from [Ag3 H2 L](+) , giving rise to [Ag3 L](+) as the major product. Deuterium labelling studies on [Ag3 D2 L](+) prove that the source of H2 is from the hydrides and not from the ligand. Comparison of TD-DFT absorption patterns obtained for the optimised structures with action spectroscopy results, allows assignment of the measured features to structures of precursors and products. Molecular dynamics "on the fly" reveal that AgH loss is favoured in the ground state, but H2 formation and loss is preferred in the first excited state S1 , in agreement with CID and LID experimental findings. This indicates favourable photo-induced formation of H2 and subsequent release from [Ag3 H2 L](+) , an important finding in context of metal hydrides as a hydrogen storage medium, which can subsequently be released by heating or irradiation with light.