RESUMEN
The main challenge for acidic water electrolysis is the lack of active and stable oxygen evolution catalysts based on abundant materials, which are globally scalable. Iridium oxide is the only material which is active and stable. However, Ir is extremely rare. While both active materials and stable materials exist, those that are active are usually not stable and vice versa. In this work, we present a new design strategy for activating stable materials originally deemed unsuitable due to a semiconducting nature and wide band gap energy. These stable semiconductors cannot change oxidation state under the relevant reaction conditions. Based on DFT calculations, we find that adding an n-type dopant facilitates oxygen binding on semiconductor surfaces. The binding is, however, strong and prevents further binding or desorption of oxygen. By combining both n-type and p-type dopants, the reactivity can be tuned so that oxygen can be adsorbed and desorbed under reaction conditions. The tuning results from the electrostatic interactions between the dopants as well as between the dopants and the binding site. This concept is experimentally verified on TiO2 by co-substituting with different pairs of n- and p-type dopants. Our findings suggest that the co-substitution approach can be used to activate stable materials, with no intrinsic oxygen evolution activity, to design new catalysts for acid water electrolysis.
RESUMEN
Density functional theory (DFT) has proven to be an invaluable and effective tool for identifying highly active electrocatalysts for the oxygen evolution reaction (OER). Herein, we take a computational approach to first identify a series of rare-earth pyrochlore oxides based on Ir and Ru as potential OER catalysts. The DFT-based phase diagrams, Pourbaix diagrams (E vs pH), projected density of states, and band energy diagrams were used to identify prospective OER catalysts based on rare-earth Ir and Ru pyrochlores. The predicted materials were synthesized using the spray-freeze freeze-drying approach to afford nanoparticulate oxides conforming to the pyrochlore structural type A2B2O7 where A = Nd, Gd, or Yb and B = Ir or Ru. In agreement with the computed Pourbaix diagrams, the materials were found to be moderately stable under OER conditions. All prepared materials show higher stability as compared to the benchmark IrO2 catalyst, and the OER mass activity of Yb2Ir2O7 and the ruthenate pyrochlores (Nd2Ru2O7, Gd2Ru2O7, and Yb2Ru2O7) were also found to exceed those of the benchmark IrO2 catalyst. We find that the OER activity of each pyrochlore series (i.e., iridate or ruthenate) generally improves as the size of the A-site cation decreases, indicating that maintaining control over the structure can be used to influence the electrocatalytic properties.
RESUMEN
The role of surface dimensionality in photo-electrochemical water oxidation was studied for different-sized SrTiO3 nanocubes. The band gap illumination of strontium titanate electrodes results in anodic current; the photo-current appears at a bias of ca. 220 mV with respect to flat-band potential. The bias needed to record anodic photo-current increases with pH, reflecting the change in the protonation of surface oxygen atoms. The photo-electrochemical activity of SrTiO3 nanocubes is size-dependent and increases with increasing particle size. Semiquantitative analysis of the observed photo-currents combined with mass spectrometric detection of the reaction products shows that the contact of water with illuminated SrTiO3 nanocubes leads to the formation of oxygen, hydrogen peroxide, and ozone. Oxygen and ozone are the primary products of the water oxidation proceeding on {100}-oriented SrTiO3 faces and their fractions increase with increasing particle size. The hydrogen peroxide is simultaneously produced via oxygen reduction at the low-dimensionality sites (crystal edges, vertices), the abundance of which increases with decreasing particle size.
RESUMEN
Single-atom catalysts with full utilization of metal centers can bridge the gap between molecular and solid-state catalysis. Metal-nitrogen-carbon materials prepared via pyrolysis are promising single-atom catalysts but often also comprise metallic particles. Here, we pyrolytically synthesize a Co-N-C material only comprising atomically dispersed cobalt ions and identify with X-ray absorption spectroscopy, magnetic susceptibility measurements and density functional theory the structure and electronic state of three porphyrinic moieties, CoN4C12, CoN3C10,porp and CoN2C5. The O2 electro-reduction and operando X-ray absorption response are measured in acidic medium on Co-N-C and compared to those of a Fe-N-C catalyst prepared similarly. We show that cobalt moieties are unmodified from 0.0 to 1.0 V versus a reversible hydrogen electrode, while Fe-based moieties experience structural and electronic-state changes. On the basis of density functional theory analysis and established relationships between redox potential and O2-adsorption strength, we conclude that cobalt-based moieties bind O2 too weakly for efficient O2 reduction.Nitrogen-doped carbon materials with atomically dispersed iron or cobalt are promising for catalytic use. Here, the authors show that cobalt moieties have a higher redox potential, bind oxygen more weakly and are less active toward oxygen reduction than their iron counterpart, despite similar coordination.
RESUMEN
Alloy nanoparticles fulfill an important role in catalysis. As such, producing them in a simple and clean way is much desired. A promising alloy nanoparticle production method is cathodic corrosion, which generates particles by applying an AC voltage to an alloy electrode. However, this harsh AC potential program might affect the final elemental distribution of the nanoparticles. In this work, we address this issue by characterizing the time that is required to create 1 µmol of Rh, Pt12Rh88, Pt55Rh45 and Pt nanoparticles under various applied potentials. The corrosion time measurements are complemented by structural characterization through transmission electron microscopy, X-ray diffraction and X-ray absorption spectroscopy. The corrosion times indicate that platinum and rhodium corrode at different rates and that the cathodic corrosion rates of the alloys are dominated by platinum. In addition, the structure-sensitive techniques reveal that the elemental distributions of the created alloy nanoparticles indeed exhibit small degrees of elemental segregation. These results indicate that the atomic alloy structure is not always preserved during cathodic corrosion.
RESUMEN
Effective catalytic water-splitting can be electrochemically triggered in an alkaline solution of sodium hypochlorite. Hypochlorite oxidation on polycrystalline platinum yields ClO· radicals, which initiate a radical-assisted water-splitting, yielding oxygen, hydrogen peroxide, and protons. The efficiency of the O2 production corresponds to about two electrons per molecule of the produced O2 and is controlled primarily by the hypochlorite concentration and pH.
RESUMEN
Bimetallic alloys show great promise for applications in a wide range of technologies related to electrochemistry and heterogeneous catalysis. The alloyed nature of these materials supports the existence of surface phenomena and structural motifs not present in single-component materials. These novel features result in electrochemical and catalytic behaviors, requiring entirely new categories of explanations. In this perspective concrete examples are used to illustrate several of these chemical and structural features, which are unique to multi-component metal surfaces. The influence of the surface's structure and surroundings (e.g. adsorbates) on each other provides a common thread, with the emergence of dynamic surfaces as its terminus. In considering three model systems (PtRu, PtNi and AuPd), we discuss not only a selection of surface phenomena relevant to each, but also the implications of these alloy-related behaviors for the electrochemical and catalytic properties of each surface.
RESUMEN
Oxygen evolution catalysis is restricted by the interdependence of adsorption energies of the reaction intermediates and the surface reactivity. The interdependence reduces the number of degrees of freedom available for catalyst optimization. Here it is demonstrated that this limitation can be removed by active site modification. This can be achieved on ruthenia by incorporation of Ni or Co into the surface, which activates a proton donor-acceptor functionality on the conventionally inactive bridge surface sites. This enhances the actual measured oxygen evolution activity of the catalyst significantly compared to conventional ruthenia.
RESUMEN
Nanoparticles of Pt/Ni alloys represent state of the art electrocatalysts for fuel cell reactions. Density functional theory (DFT) based calculations along with in situ X-ray absorption spectroscopy (XAS) data show that the surface structure of Pt3Ni nanoparticulate alloys is potential-dependent during electrocatalytic reactions. Pt3Ni based electrocatalysts demonstrate preferential confinement of Ni to the subsurface when the electrode is polarized in the double layer region where the surface is free of specifically adsorbed species. Hydrogen adsorption triggers nickel segregation to the surface. This process is facilitated by a high local surface coverage of adsorbed hydrogen in the vicinity of the surface confined Ni due to an uneven distribution of the adsorbate(s) on the catalyst's surface. The adsorption triggered surface segregation shows a non-monotonous dependence on the electrode potential and can be identified as a breathing of the catalyst as was proposed previously. The observed breathing behavior is relatively fast and proceeds on a time scale of 100-1000 s.
RESUMEN
This paper describes a generalized approach for the selective electrocatalytic C-C bond splitting in aliphatic alcohols at low temperature in aqueous state, with ethanol as an example. We show that selective C-C bond cleavage, leading to carbon dioxide, is possible in high pH aqueous media at low overpotentials. This improved selectivity and activity is achieved using a solution-born co-catalyst based on Pb(IV) acetate, which controls the mode of the ethanol adsorption so as to facilitate direct activation of the C-C bond. The simultaneously formed under-potentially deposited (UPD) Pb and surface lead hydroxide change the functionality of the catalyst surface for efficient promotion of CO oxidation. The resulting catalyst retains an unprecedented ability to sustain the full oxidation reaction pathway on an extended time scale of hours as opposed to minutes without addition of Pb(IV) acetate.
RESUMEN
Ruthenium-based oxides with rutile structure were examined regarding their properties in electrocatalytic ethene oxidation in acid media. A possible promoting effect of chloride ions toward oxirane formation was explored. Online differential electrochemical mass spectrometry combined with electrochemical polarization techniques were used to monitor the potential dependence of organic products resulting from ethene oxidation as well as the reaction solution decomposition products. Quantum chemical modeling by means of density functional theory was employed to study key reaction steps. The ethene oxidation in acid media led to CO(2), whereas oxirane was formed in the presence of 0.3 M Cl(-). In the Cl(-) promoted oxidation on RuO(2), oxirane and a small amount of CO(2) were the only detected electro-oxidation products at potentials below the onset of Cl(2) and O(2) evolution, resulting from Cl(-) and water oxidation. It is demonstrated here that the epoxidation is a surface-related electrocatalytic process that depends on the surface properties. Cl acts as the epoxidation promoter that switches off the combustion pathway toward CO(2) and enables the epoxidation reaction channel by surface reactive sites blocking. The proposed epoxidation mechanism implies binuclear (recombination) mechanism for O(2) evolution reaction on considered surfaces.
RESUMEN
Quasi-elastic laser light scattering (QELS) is used to investigate dynamics of the polarised water/1,2-dichloroethane (DCE) interface in the presence of adsorbed DL-alpha-dipalmitoylphosphatidylcholine (DPPC) over a range of the interfacial potential differences (+/-0.3 V) and DPPC concentrations (0-20 microM). An analysis of the frequency of thermally excited capillary waves reveals some novel features in the adsorption of DPPC. The effect of the capillary wavenumber on the capillary wave frequency and the damping factor suggest that the dynamic behaviour of ITIES is consistent with the theoretical predictions for a sharp liquid-liquid interface.
RESUMEN
The voltage-induced assembly of mercaptosuccinic acid-stabilized Au nanoparticles of 1.5 +/- 0.4 nm diameter is investigated at the polarizable water/1,2-dichloroethane interface. Admittance measurements and quasi-elastic laser scattering (QELS) studies reveal that the surface concentration of the nanoparticle at the liquid/liquid boundary is reversibly controlled by the applied bias potential. The electrochemical and optical measurements provide no evidence of irreversible aggregation or deposition of the particles at the interface. Analysis of the electrocapillary curves constructed from the dependence of the frequency of the capillary waves on the applied potential and bulk particle concentration indicates that the maximum particle surface density is 3.8 x 10(13) cm(-2), which corresponds to 67% of a square closed-pack arrangement. This system provides a unique example of reversible assembly of nanostructures at interfaces, in which the density can be effectively tuned by the applied potential bias.