Lanthanide-Doped Upconversion Nanoparticles: Exploring A Treasure Trove of NIR-Mediated Emerging Applications.

Lanthanide-doped upconversion nanoparticles (UCNPs) possess the remarkable ability to convert multiple near-infrared (NIR) photons into higher energy ultraviolet-visible (UV-vis) photons, making them a prime candidate for several advanced applications within the realm of nanotechnology. Compared to traditional organic fluorophores and quantum dots (QDs), UCNPs possess narrower emission bands (fwhm of 10-50 nm), large anti-Stokes shifts, low toxicity, high chemical stability, and resistance to photobleaching and blinking. In addition, unlike UV-vis excitation, NIR excitation is nondestructive at lower power intensities and has high tissue penetration depths (up to 2 mm) with low autofluorescence and scattering. Together, these properties make UCNPs exceedingly favored for advanced bioanalytical and theranostic applications, where these systems have been well-explored. UCNPs are also well-suited for bioimaging, optically modulating chemistries, forensic science, and other state-of-the-art research applications. In this review, an up-to-date account of emerging applications in UCNP research, beyond bioanalytical and theranostics, are presented including optogenetics, super-resolution imaging, encoded barcodes, fingerprinting, NIR vision, UCNP-assisted photochemical manipulations, optical tweezers, 3D printing, lasing, NIR-II imaging, UCNP-molecule nanohybrids, and UCNP-based persistent luminescent nanocrystals.

Unlocking Long-Term Stability of Upconversion Nanoparticles with Biocompatible Phosphonate-Based Polymer Coatings.

Achieving long-term (>3 months) colloidal stability of upconversion nanoparticles (UCNPs) in biologically relevant buffers has been a major challenge, which has severely limited practical implementation of UCNPs in bioimaging and nanomedicine applications. To address this challenge, nine unique copolymers formulations were prepared and evaluated as UCNP overcoatings. These polymers consisted of a poly(isobutylene-alt-maleic anhydride) (PIMA) backbone functionalized with different ratios and types of phosphonate anchoring groups and poly(ethylene glycol) (PEG) moieties. The syntheses were done as simple, one-pot nucleophilic addition reactions. These copolymers were subsequently coated onto NaYF4:Yb3+,Er3+ UCNPs, and colloidal stability was evaluated in 1 × PBS, 10 × PBS, and other buffers. UCNP colloidal stability improved (up to 4 months) when coated with copolymers containing greater proportions of anchoring groups and higher phosphonate valences. Furthermore, small molecules could be conjugated to these overcoated UCNPs by use of copper-free click chemistry, as was done to demonstrate suitability for sensor and bioprobe development.

Multifunctional Droplet Microfluidic Platform for Rapid Immobilization of Oligonucleotides on Semiconductor Quantum Dots.

Quantum dot-DNA oligonucleotide (QD-DNA) conjugates have been used in many fields such as nucleic acid bioassays, intracellular probes, and drug delivery systems. A typical solid-phase method that achieves rapid loading of oligonucleotides on surfaces of QDs involves a two-step reaction and is performed in a batch-based approach. In contrast, droplet microfluidics offers many advantages that are unavailable when using batch processing, providing rapid and dense immobilized DNA oligonucleotides on QDs. The presented droplet microfluidic approach allows high-quality QD-DNA conjugates to be produced using one single device, which is designed to have two droplet generators, one droplet merger, and one mixer. One of the droplet generators coencapsulates QDs and magnetic beads (MBs) into nanoliter-sized droplets for the production of QD-MB conjugates and the other encapsulates oligonucleotides in nanoliter-sized droplets. These two streams of droplets then merge at a one-to-one ratio in a chamber. The merged droplets travel along the mixer, which is a serpentine microchannel with 30 turns, resulting in QD-DNA conjugation structures of high quality. This multifunctional microfluidic device provides advantages such as higher degree of control over the reaction conditions, minimized cross-contamination and impurities, and reduction of reagent consumption while eliminating any need for external vortexing and pipetting. To evaluate the quality of the QD-DNA conjugates, they were used as Forster resonance energy transfer (FRET) probes to quantify oligonucleic targets.

Enhanced Immunoassay Using a Rotating Paper Platform for Quantitative Determination of Low Abundance Protein Biomarkers.

The changing concentrations of circulating protein biomarkers have been correlated with a variety of diseases. Quantitative bioassays capable of sensitive and specific determination of protein biomarkers at low levels can be essential for therapeutic treatments that can improve outcomes for patients. Herein, we describe the investigation of a rotating paper device (RPD) for quantitative determination of targeted proteins at the fM concentration level. The RPD consists of two circular papers each separately supported with a plastic disc. Protein detection is conducted via enhanced immunoassay using amplification in a sequential workflow, which includes a sandwich immunoassay in the upper paper and a signal amplification reaction in the lower paper. The sandwich immunoassay is conducted using biobarcode nanoparticles (BNPs) and results in the release of reporter oligonucleotides from BNPs. These oligonucleotides are transferred to the bottom paper, where they engage in a target recycling methodology that leads to the production of a colorimetric signal. The assay was evaluated for quantitation of interleukin-6 (IL-6), a cytokine biomarker in serum. A limit of detection of 63 fM and a dynamic range of 200 fM-8 pM was observed for the assay. The specificity of the assay was successfully verified against several common protein biomarkers.

Paper-based platform for detection by hybridization using intrinsically labeled fluorescent oligonucleotide probes on quantum dots.

A paper-based platform was investigated in which the selective detection of oligonucleotide targets by hybridization was accomplished via the enhancement of fluorescence emission from intrinsically labeled DNA probes that were immobilized on the surface of quantum dots (QDs). Multiple copies of a derivative of thiazole orange, an intercalating dye known to form non-emissive dimers, were conjugated to single-stranded oligonucleotide probes. Dimerization resulted in the formation of H-aggregates where excitonic interactions led to the suppression of fluorescence. The hybridization of the oligonucleotide probe with a complementary target resulted in the enhancement of fluorescence emission as the dimers dissociated and the dyes preferentially intercalated with the duplex. The detection of oligonucleotide targets using this configuration eliminated the need for labeling the target strands, and fluorescence intensity was proportional to the extent of hybridization. In addition, the dye molecules were excited using Foerster Resonance Energy Transfer (FRET) from QD donors, which resulted in improved selectivity and allowed for ratiometric detection. A solution-phase hybridization assay based on similar operational principles has been previously reported, and this new work investigated the advantages offered for this transduction scheme using paper-based solid-phase substrates. QD-probe conjugates were immobilized in sufficient density on the paper matrix to provide for multiple-donor-multiple-acceptor interactions that resulted in a 20-fold enhancement of acceptor emission compared to the solution-based assay, providing a limit of detection of 0.1 pmol. The paper-based assay provided for the reduction of the time needed for sample preparation and data acquisition, demonstrated that transduction was possible in a complex matrix (goat serum) without compromising on the performance observed in buffer solution, and that oligonucleotides generated from standard PCR amplification could be detected.

Cancer biomarker determination by resonance energy transfer using functional fluorescent nanoprobes.

The development of bioanalytical methods that provide early detection of the presence of cancer by sensitive and specific determination of biomarkers such as small biomolecules, nucleic acids, proteins, enzymes, and even whole cells are essential to improve opportunity for improved patient treatment and to diminish the rate of cancer mortality. Förster resonance energy transfer (FRET) methods have been increasingly used to develop bioassays that offer speed, selectivity and low detection levels with practicality that is appropriate for providing point-of-care measurements for screening. The unique optical and photophysical properties of fluorescent nanoparticles such as semiconductor quantum dots (QDs), upconversion nanoparticles (UCNPs), graphene quantum dots (GQDs) and other materials have been reported to operate as efficient donors and/or acceptors for replacement of fluorescent organic dye molecules in various FRET-based assays. This review is focused on the recent progress that has been made in the development of nanoparticle-based FRET bioassays, and considers nanoparticle synthesis, design of optical properties, conjugation chemistry and approaches to fluorescence detection that provide for selective and sensitive quantification of cancer biomarkers.

Enzymatic amplification of oligonucleotides in paper substrates.

Several solution-based methods have recently been adapted for use in paper substrates for enzymatic amplification to increase the number of copies of DNA sequences. There is limited information available about the impact of a paper matrix on DNA amplification by enzymatic processes, and about how to optimize conditions to maximize yields. The work reported herein provides insights about the impact of physicochemical properties of a paper matrix, using nuclease-assisted amplification by exonuclease III and nicking endonuclease Nt. Bbv, and a quantum dot (QD) - based Forster Resonance Energy Transfer (FRET) assay to monitor the extent of amplification. The influence of several properties of paper on amplification efficiency and kinetics were investigated, such as surface adsorption of reactants, and pore size. Additional factors that impact amplification processes such as target length and the packing density of oligonucleotide probes on the nanoparticle surfaces were also studied. The work provides guidance for development of more efficient enzymatic target-recycling DNA amplification methods in paper substrates.

Detection of cystic fibrosis transmembrane conductance regulator ΔF508 gene mutation using a paper-based nucleic acid hybridization assay and a smartphone camera.

Diagnostic technology that makes use of paper platforms in conjunction with the ubiquitous availability of digital cameras in cellular telephones and personal assistive devices offers opportunities for development of bioassays that are cost effective and widely distributed. Assays that operate effectively in aqueous solution require further development for implementation in paper substrates, overcoming issues associated with surface interactions on a matrix that offers a large surface-to-volume ratio and constraints on convective mixing. This report presents and compares two related methods for determination of oligonucleotides that serve as indicators of cystic fibrosis, differentiating between the normal wild-type sequence, and a mutant-type sequence that has a 3-base replacement. The transduction strategy operates by selective hybridization of oligonucleotide probes that are conjugated to fluorescent quantum dots, where hybridization of target sequences causes a molecular fluorophore to approach the quantum dot and become emissive through fluorescence resonance energy transfer. Detection can rely on hybridization of a target that is labelled with Cy3 fluorophore, or in the presence of an unlabelled target when a sandwich assay format is implemented with a labelled reporter oligonucleotide. Selectivity to determine the presence of mismatched sequences involves appropriate selection of nucleotide sequences to set melt temperatures, in conjunction with control of stringency conditions using formamide as a chaotrope. It was determined that both direct and sandwich assays on paper substrates are able to distinguish between wild-type and mutant-type samples.

Inorganic Nanoparticles as Donors in Resonance Energy Transfer for Solid-Phase Bioassays and Biosensors.

Bioassays for the rapid detection and quantification of specific nucleic acids, proteins, and peptides are fundamental tools in many clinical settings. Traditional optical emission methods have focused on the use of molecular dyes as labels to track selective binding interactions and as probes that are sensitive to environmental changes. Such dyes can offer good detection limits based on brightness but typically have broad emission bands and suffer from time-dependent photobleaching. Inorganic nanoparticles such as quantum dots and upconversion nanoparticles are photostable over prolonged exposure to excitation radiation and tend to offer narrow emission bands, providing a greater opportunity for multiwavelength multiplexing. Importantly, in contrast to molecular dyes, nanoparticles offer substantial surface area and can serve as platforms to carry a large number of conjugated molecules. The surface chemistry of inorganic nanoparticles offers both challenges and opportunities for the control of solubility and functionality for selective molecular interactions by the assembly of coatings through coordination chemistry. This report reviews advances in the compositional design and methods of conjugation of inorganic quantum dots and upconversion nanoparticles and the assembly of combinations of nanoparticles to achieve energy exchange. Our interest is the exploration of configurations where the modified nanoparticles can be immobilized to solid substrates for the development of bioassays and biosensors that operate by resonance energy transfer (RET).

Detection of a cancer biomarker protein on modified cellulose paper by fluorescence using aptamer-linked quantum dots.

The development of point-of-care bioassays for sensitive screening of protein-based cancer biomarkers would improve the opportunity for early stage diagnosis. A strategy for a fluorescence resonance energy transfer (FRET)-based bioassay has been investigated that makes use of modified cellulose paper for the detection of an epithelial cell adhesion molecule (EpCAM), which is a transmembrane glycoprotein that is overexpressed in several tumors of epithelial origin. The paper matrix was a substrate for immobilized aptamer-linked quantum dots (QDs-Apt) and Cy3 labeled complementary DNA (cDNA), which served as a donor and an acceptor, respectively. Competitive binding of EpCAM displaced the cDNA, resulting in the reduction of FRET. The paper-based bioassay was able to detect EpCAM in buffer solution as well as in 10% bovine serum solution using a reaction time of no more than 60 minutes. The dynamic range was 1-100 nM in buffer with a precision better than 4%, and the limit of detection was 250 pM in buffer and 600 pM in 10% serum.

Resonance Energy Transfer-Based Nucleic Acid Hybridization Assays on Paper-Based Platforms Using Emissive Nanoparticles as Donors.

Quantum dots (QDs) and upconverting nanoparticles (UCNPs) are luminescent nanoparticles (NPs) commonly used in bioassays and biosensors as resonance energy transfer (RET) donors. The narrow and tunable emissions of both QDs and UCNPs make them versatile RET donors that can be paired with a wide range of acceptors. Ratiometric signal processing that compares donor and acceptor emission in RET-based transduction offers improved precision, as it accounts for fluctuations in the absolute photoluminescence (PL) intensities of the donor and acceptor that can result from experimental and instrumental variations. Immobilizing NPs on a solid support avoids problems such as those that can arise with their aggregation in solution, and allows for facile layer-by-layer assembly of the interfacial chemistry. Paper is an attractive solid support for the development of point-of-care diagnostic assays given its ubiquity, low-cost, and intrinsic fluid transport by capillary action. Integration of nanomaterials with paper-based analytical devices (PADs) provides avenues to augment the analytical performance of PADs, given the unique optoelectronic properties of nanomaterials. Herein, we describe methodology for the development of PADs using QDs and UCNPs as RET donors for optical transduction of nucleic acid hybridization. Immobilization of green-emitting QDs (gQDs) on imidazole functionalized cellulose paper is described for use as RET donors with Cy3 molecular dye as acceptors for the detection of SMN1 gene fragment. We also describe the covalent immobilization of blue-emitting UCNPs on aldehyde modified cellulose paper for use as RET donors with orange-emitting QDs (oQDs) as acceptors for the detection of HPRT1 gene fragment. The data described herein is acquired using an epifluorescence microscope, and can also be collected using technology such as a typical electronic camera.

A paper-based multiplexed resonance energy transfer nucleic acid hybridization assay using a single form of upconversion nanoparticle as donor and three quantum dots as acceptors.

Monodisperse aqueous upconverting nanoparticles (UCNPs) were covalently immobilized on aldehyde modified cellulose paper via reductive amination to evaluate the multiplexing capacity of luminescence resonance energy transfer (LRET) between UCNPs and quantum dots (QDs). This is the first account of a multiplexed bioassay strategy that demonstrates the principle of use of a single form of UCNP as donor and three different color emitting QDs as acceptors to concurrently determine three analytes. Broad absorbance profiles of green, orange and red QDs that spanned from the first exciton absorption peak to the UV region were in overlap with a blue emission band from UCNPs composed of NaYF4 that was doped with 30% Yb3+, 0.5% Tm3+, allowing for LRET that was stimulated using 980 nm near-infrared radiation. The characteristic narrow and well-defined emission peaks of UCNPs and QDs allowed for the collection of luminescence from each nanoparticle using a band-pass optical filter and an epi-fluorescence microscope. The LRET system was used for the concurrent detection of uidA, Stx1A and tetA gene fragments with selectivity even in serum samples, and reached limits of detection of 26 fmol, 56 fmol and 76 fmol, respectively.

Rapid Immobilization of Oligonucleotides at High Density on Semiconductor Quantum Dots and Gold Nanoparticles.

Oligonucleotide-coated nanoparticles (NPs) have been used in numerous applications such as bioassays, as intracellular probes, and for drug delivery. One challenge that is confronted in the preparation of oligonucleotide-NP conjugates is derived from surface charge because nanoparticles are often stabilized and made water-soluble with a coating of negatively charged capping ligands. Therefore, an electrostatic repulsion is present when attempting to conjugate oligonucleotides. The result is that the conjugation can be a slow process, sometimes requiring 1 to 2 days to equilibrate at the highest surface density. The effect is compounded by electrostatic repulsion between neighboring oligonucleotide strands on the NP surfaces, which tends to lower the surface density. Herein, we report a novel method that enables conjugation in less than 1 min with a surface density of oligonucleotides up to the theoretical physical limit of occupancy. Negatively charged NPs are first adsorbed onto the surface of positively charged magnetic beads (MBs) to create MB-NP conjugates. Oligonucleotides are subsequently electrostatically adsorbed onto the MB surfaces when added to a suspension of MB-NP conjugates. This creates an oligonucleotide concentration 105 to 106 greater than in bulk solution in the vicinity of the nanoparticles, resulting in the promotion of the kinetics by over 1000-fold and achieving the maximum density possible for the conjugation reaction.

Paper-based biodetection using luminescent nanoparticles.

Point-of-care and in-field technologies for rapid, sensitive and selective detection of molecular biomarkers have attracted much interest. Rugged bioassay technology capable of fast detection of markers for pathogens and genetic diseases would in particular impact the quality of health care in the developing world, but would also make possible more extensive screening in developed countries to tackle problems such as those associated with water and food quality, and tracking of infectious organisms in hospitals and clinics. Literature trends indicate an increasing interest in the use of nanomaterials, and in particular luminescent nanoparticles, for assay development. These materials may offer attributes for development of assays and sensors that could achieve improvements in analytical figures of merit, and provide practical advantages in sensitivity and stability. There is opportunity for cost-efficiency and technical simplicity by implementation of luminescent nanomaterials as the basis for transduction technology, when combined with the use of paper substrates, and the ubiquitous availability of cell phone cameras and associated infrastructure for optical detection and transmission of results. Luminescent nanoparticles have been described for a broad range of bioanalytical targets including small molecules, oligonucleotides, peptides, proteins, saccharides and whole cells (e.g., cancer diagnostics). The luminescent nanomaterials that are described herein for paper-based bioassays include metal nanoparticles, quantum dots and lanthanide-doped nanocrystals. These nanomaterials often have broad and strong absorption and narrow emission bands that improve opportunity for multiplexed analysis, and can be designed to provide emission at wavelengths that are efficiently processed by conventional digital cameras. Luminescent nanoparticles can be embedded in paper substrates that are designed to direct fluid flow, and the resulting combination of technologies can offer competitive analytical performance at relatively low cost.

Intrinsically Labeled Fluorescent Oligonucleotide Probes on Quantum Dots for Transduction of Nucleic Acid Hybridization.

Quantum dots (QDs) have been widely used in chemical and biosensing due to their unique photoelectrical properties and are well suited as donors in fluorescence resonance energy transfer (FRET). Selective hybridization interactions of oligonucleotides on QDs have been determined by FRET. Typically, the QD-FRET constructs have made use of labeled targets or have implemented labeled sandwich format assays to introduce dyes in proximity to the QDs for the FRET process. The intention of this new work is to explore a method to incorporate the acceptor dye into the probe molecule. Thiazole orange (TO) derivatives are fluorescent intercalating dyes that have been used for detection of double-stranded nucleic acids. One such dye system has been reported in which single-stranded oligonucleotide probes were doubly labeled with adjacent thiazole orange derivatives. In the absence of the fully complementary (FC) oligonucleotide target, the dyes form an H-aggregate, which results in quenching of fluorescence emission due to excitonic interactions between the dyes. The hybridization of the FC target to the probe provides for dissociation of the aggregate as the dyes intercalate into the double stranded duplex, resulting in increased fluorescence. This work reports investigation of the dependence of the ratiometric signal on the type of linkage used to conjugate the dyes to the probe, the location of the dye along the length of the probe, and the distance between adjacent dye molecules. The limit of detection for 34mer and 90mer targets was found to be identical and was 10 nM (2 pmol), similar to analogous QD-FRET using labeled oligonucleotide target. The detection system could discriminate a one base pair mismatch (1BPM) target and was functional without substantial compromise of the signal in 75% serum. The 1BPM was found to reduce background signal, indicating that the structure of the mismatch affected the environment of the intercalating dyes.

Ratiometric fluorescence transduction by hybridization after isothermal amplification for determination of zeptomole quantities of oligonucleotide biomarkers with a paper-based platform and camera-based detection.

Paper is a promising platform for the development of decentralized diagnostic assays owing to the low cost and ease of use of paper-based analytical devices (PADs). It can be challenging to detect on PADs very low concentrations of nucleic acid biomarkers of lengths as used in clinical assays. Herein we report the use of thermophilic helicase-dependent amplification (tHDA) in combination with a paper-based platform for fluorescence detection of probe-target hybridization. Paper substrates were patterned using wax printing. The cellulosic fibers were chemically derivatized with imidazole groups for the assembly of the transduction interface that consisted of immobilized quantum dot (QD)-probe oligonucleotide conjugates. Green-emitting QDs (gQDs) served as donors with Cy3 as the acceptor dye in a fluorescence resonance energy transfer (FRET)-based transduction method. After probe-target hybridization, a further hybridization event with a reporter sequence brought the Cy3 acceptor dye in close proximity to the surface of immobilized gQDs, triggering a FRET sensitized emission that served as an analytical signal. Ratiometric detection was evaluated using both an epifluorescence microscope and a low-cost iPad camera as detectors. Addition of the tHDA method for target amplification to produce sequences of ∼100 base length allowed for the detection of zmol quantities of nucleic acid targets using the two detection platforms. The ratiometric QD-FRET transduction method not only offered improved assay precision, but also lowered the limit of detection of the assay when compared with the non-ratiometric QD-FRET transduction method. The selectivity of the hybridization assays was demonstrated by the detection of single nucleotide polymorphism.

Energy Transfer Assays Using Quantum Dot-Gold Nanoparticle Complexes: Optimizing Oligonucleotide Assay Configuration Using Monovalently Conjugated Quantum Dots.

The energy transfer between quantum dots (QDs) and gold nanoparticles (AuNPs) represents a popular transduction scheme in analytical assays that use nanomaterials. The impact of the spatial arrangement of the two types of nanoparticles on analytical performance has now been evaluated using a nucleic acid strand displacement assay. The first spatial arrangement (configuration 1) involved the assembly of a number of monovalently functionalized QD-oligonucleotide conjugates around a single central AuNP that was functionalized with complementary oligonucleotide sequences. The assembly of these complexes, and subsequent disassembly via target oligonucleotide-mediated displacement, were used to evaluate energy transfer efficiencies. Furthermore, the inner filter effect of AuNPs on the fluorescence intensity of the QD was studied. AuNPs of three different diameters (6, 13, and 30 nm) were used in these studies. Configuration 2 was based on the placement of monovalently functionalized AuNP-oligonucleotide conjugates around a single QD that was functionalized with a complementary oligonucleotide. The optimal assay configuration, established by evaluating energy transfer efficiencies and inner filter effects, was obtained by arranging at most 15 QDs around the 13 nm AuNP (configuration 1). These assays provided a 2.5-fold change in fluorescence intensity in the presence of target oligonucleotides. To obtain the same response with configuration 2 required the placement of three 6 nm AuNPs around the QD. This resulted in configuration 2 having a 5-fold lower fluorescence intensity when compared to configuration 1. The use of low-cost detection systems (digital camera) further emphasized the higher analytical performance of configuration 1. Response curves obtained using these detection systems demonstrated that configuration 1 had a 10-fold higher sensitivity when compared to configuration 2. This study provides an important framework for the development of sensitive assays using gold nanoparticles and quantum dots.

A paper-based resonance energy transfer nucleic acid hybridization assay using upconversion nanoparticles as donors and quantum dots as acceptors.

Monodisperse aqueous upconverting nanoparticles (UCNPs) were covalently immobilized on aldehyde modified cellulose paper via reduction amination to develop a luminescence resonance energy transfer (LRET)-based nucleic acid hybridization assay. This first account of covalent immobilization of UCNPs on paper for a bioassay reports an optically responsive method that is sensitive, reproducible and robust. The immobilized UCNPs were decorated with oligonucleotide probes to capture HPRT1 housekeeping gene fragments, which in turn brought reporter conjugated quantum dots (QDs) in close proximity to the UCNPs for LRET. This sandwich assay could detect unlabeled oligonucleotide target, and had a limit of detection of 13 fmol and a dynamic range spanning nearly 3 orders of magnitude. The use of QDs, which are excellent LRET acceptors, demonstrated improved sensitivity, limit of detection, dynamic range and selectivity compared to similar assays that have used molecular fluorophores as acceptors. The selectivity of the assay was attributed to the decoration of the QDs with polyethylene glycol to eliminate non-specific adsorption. The kinetics of hybridization were determined to be diffusion limited and full signal development occurred within 3 min.

A Paper-Based Sandwich Format Hybridization Assay for Unlabeled Nucleic Acid Detection Using Upconversion Nanoparticles as Energy Donors in Luminescence Resonance Energy Transfer.

Bioassays based on cellulose paper substrates are gaining increasing popularity for the development of field portable and low-cost diagnostic applications. Herein, we report a paper-based nucleic acid hybridization assay using immobilized upconversion nanoparticles (UCNPs) as donors in luminescence resonance energy transfer (LRET). UCNPs with intense green emission served as donors with Cy3 dye as the acceptor. The avidin functionalized UCNPs were immobilized on cellulose paper and subsequently bioconjugated to biotinylated oligonucleotide probes. Introduction of unlabeled oligonucleotide targets resulted in a formation of probe-target duplexes. A subsequent hybridization of Cy3 labeled reporter with the remaining single stranded portion of target brought the Cy3 dye in close proximity to the UCNPs to trigger a LRET-sensitized emission from the acceptor dye. The hybridization assays provided a limit of detection (LOD) of 146.0 fmol and exhibited selectivity for one base pair mismatch discrimination. The assay was functional even in undiluted serum samples. This work embodies important progress in developing DNA hybridization assays on paper. Detection of unlabeled targets is achieved using UCNPs as LRET donors, with minimization of background signal from paper substrates owing to the implementation of low energy near-infrared (NIR) excitation.

Evaluation of nanoparticle-ligand distributions to determine nanoparticle concentration.

The concentration of nanoparticles in solution is an important, yet challenging, parameter to quantify. In this work, a facile strategy for the determination of nanoparticle concentration is presented. The method relies on the quantitative analysis of the inherent distribution of nanoparticle-ligand conjugates that are generated when nanoparticles are functionalized with ligands. Validation of the method was accomplished by applying it to gold nanoparticles and semiconductor nanoparticles (CdSe/ZnS; core/shell). Poly(ethylene glycol) based ligands, with functional groups that quantitatively react with the nanoparticles, were incubated with the nanoparticles at varying equivalences. Agarose gel electrophoresis was subsequently used to separate and quantify the nanoparticle-ligand conjugates of varying valences. The distribution in the nanoparticle-ligand conjugates agreed well with that predicted by the Poisson model. A protocol was then developed, where a series of only eight different ligand amounts could provide an estimate of the nanoparticle concentration that spans 3 orders of magnitude (1 µM to 1 mM). For the gold nanoparticles and semiconductor nanoparticles, the measured concentrations were found to deviate by only 7% and 2%, respectively, from those determined by UV-vis spectroscopy. The precision of the assay was evaluated, resulting in a coefficient of variation of 5-7%. Finally, the protocol was used to determine the extinction coefficient of alloyed semiconductor nanoparticles (CdSxSe1-x/ZnS), for which a reliable estimate is currently unavailable, of three different emission wavelengths (525, 575, and 630 nm). The extinction coefficient of the nanoparticles of all emission wavelengths was similar and was found to be 2.1 × 10(5) M(-1)cm(-1).