Early-responsive molecular signatures associated with halophytic adaptation in Sesuvium portulacastrum (L.).

Sesuvium portulacastrum (L.) is a halophyte, adapted to grow naturally under saline environments. The ability to use Na and K interchangeably indicated its facultative halophyte nature. No significant growth reduction occurs in seedlings up to 250 mM NaCl, except for curling of the youngest leaf. Within 8 h of salt treatment, seedlings accumulate proline, glycine betaine and other amino acids in both root and shoot. Despite a continued increase of tissue Na content, the number of differentially expressed genes (DEGs) decreases between 8 and 24 h of salt exposure, indicating transcriptional restoration after the initial osmotic challenge. At 8 h, upregulated genes mainly encode transporters and transcription factors, while genes in growth-related pathways such as photosynthesis and ribosome-associated biogenesis are suppressed. Overexpression of SpRAB18 (an ABA-responsive dehydrin), one of the most strongly induced DEGs, in soybean was found to increase biomass in control conditions and the growth benefit was maintained when plants were grown in 100 mM NaCl, indicating conservation of function in halophyte and glycophyte. An open-access transcriptome database "SesuviumKB" (https://cb.imsc.res.in/sesuviumkb/) was developed to involve the scientific community in wide-scale functional studies of S. portulacastrum genes, that could pave the way to engineer salt tolerance in crops.

A Facile Strategy for Preparation of Yttrium-90 Therapeutic Sources for Radionuclide Therapy.

Background: Mold brachytherapy using high-energy ß--emitting radioisotopes is a promising treatment modality for skin cancers and keloids. Simple methodologies for consistent and stable incorporation of radionuclides into the matrix are desired for preparation of therapeutic sources. Methods: The authors report a facile strategy for the stable incorporation of Yttrium-90 (90Y) into amidoxime-functionalized polyacrylonitrile-polyvinylidene fluoride (PAN-PVDF) membranes. The strategy consisted of surface modification of PAN-PVDF membranes by reaction with hydroxylamine, characterization of the functionalized membranes, and optimization of experimental variables for maximum loading of 90Y onto the membranes. Quality control tests essential for confirming the suitability of the 90Y therapeutic sources for human application, such as uniformity of activity distribution, absence of leaching of activity, and estimation of surface contamination, were performed. Theoretical calculations to estimate the dose imparted by the 90Y therapeutic sources at varying depths of tissue were also carried out to predict the possible therapeutic outcome of treatment. Results: A facile method for large-scale preparation of 90Y-based mold brachytherapy sources could be established. Conclusions: The source fabrication methodology standardized in this work could be tailored for fabrication of custom-made 90Y sources for individualized treatment of superficial tumors, Bowen's disease, and keloids.

Synthesis and Preliminary Biological Evaluation of 177Lu-Labeled Polyhydroxamic Acid Microparticles Toward Therapy of Hepatocellular Carcinoma.

Background: Transarterial radioembolization (TARE) represents an effective targeted therapeutic option for hepatocellular carcinoma (HCC), a cancer with high mortality and poor prognosis. The aim of this study was the preparation and preliminary biological evaluation of 177Lu-labeled polyhydroxamic acid (PHA) microparticles toward possible use in the therapy of HCC. Materials and Methods: PHA microparticles were synthesized starting from polyacrylamide. They were characterized by Fourier-transform infrared spectroscopy (FT-IR), visual color test, and laser diffraction particle size analysis. Experimental variables such as reaction pH, amount of PHA microparticles, carrier Lu content, and incubation time were optimized for maximum uptake of 177Lu on PHA microparticles. Stability of 177Lu-PHA microparticles was tested in the presence of competing Fe(III) ions in solution. In vitro stability of 177Lu-PHA microparticles was evaluated in 0.05 M sodium phosphate solution (pH 7.5), saline, and serum. Bioevaluation studies were performed in normal Wistar rats by intrahepatic artery injection of the 177Lu-PHA microparticles. Results: Successful synthesis of PHA microparticles could be confirmed from the results of FT-IR analysis and visual color test. Laser diffraction-based particle size analysis confirmed median particle size to be 54 µm, suitable for TARE. Under the optimized conditions, >99% loading of 177Lu on PHA microparticles could be achieved. Even in the presence of high concentration of Fe(III) ions, 177Lu binding to PHA microparticles was stable. 177Lu-PHA microparticles exhibited excellent in vitro stability in sodium phosphate solution, saline, and serum up to 5 d at 37°C. In the bioevaluation studies performed in normal Wistar rats, 92.8% ± 3.1% of 177Lu-PHA microparticles were retained in the liver at 96 h postinjection without any significant leakage to other organs. Conclusion: This preliminary study demonstrates the potential of synthesized PHA microparticles as carriers of therapeutic radioisotopes such as 177Lu for treatment of HCC.

Preparation of Radioactive Skin Patches Using Polyhydroxamic Acid-Grafted Cellulose Films Toward Applications in Treatment of Superficial Tumors.

The primary objective of this investigation is the development of a strategy for the synthesis of polyhydroxamic acid (PHA)-grafted cellulose film, its characterization, and evaluation of its usefulness for the preparation of 177Lu skin patches for superficial brachytherapy applications. PHA-grafted cellulose films were synthesized and characterized by Fourier transformed infrared spectrometer analysis and visual color test with Fe(III) solution. Uptake of 177Lu on the PHA-grafted cellulose was investigated by varying the experimental conditions such as the pH of feed solution, amount of nonradioactive Lu carrier, time, and temperature of the reaction. Under the optimized conditions, >95% loading of 177Lu on the PHA-cellulose film could be achieved. Autoradiography studies of 177Lu-PHA-cellulose film confirmed the uniform distribution of 177Lu on the surface. Energy dispersive X-ray analysis of nonradioactive Lu-PHA-cellulose film confirmed the loading of Lu on PHA-cellulose film. The utility of PHA-functionalized cellulose films for the fabrication of radioactive sources for superficial brachytherapy applications could be successfully demonstrated.

A visual strip sensor for determination of iron.

A visual strip has been developed for sensing iron in different aqueous samples like natural water and fruit juices. The sensor has been synthesized by UV-radiation induced graft polymerization of acrylamide monomer in microporous poly(propylene) base. For physical immobilization of iron selective reagent, the in situ polymerization of acrylamide has been carried out in the presence of 1,10-phenanthroline. The loaded strip on interaction with Fe(II) in aqueous solution turned into orange red color and the intensity of the color was found to be directly proportional to the amount of Fe(II) in the aqueous sample. The minimal sensor response with naked eye was found for 50ngmL(-1) of Fe in 15min of interaction. However, as low as 20ngmL(-1) Fe could be quantified using a spectrophotometer. The detection limit calculated using the 3s/S criteria, where 's' is the standard deviation of the absorbance of blank reagent loaded strip and 'S' is the slope of the linear calibration plot, was 1.0ngmL(-1). The strip was applied to measure Fe in a variety of samples such as ground water and fruit juices.

Synthesis and application of a unified sorbent for simultaneous preconcentration and determination of trace metal pollutants in natural waters.

A flat sheet sorbent with poly(hydroxamic acid) groups anchored on the microporous structure of poly(propylene) membrane was developed and applied for the preconcentration and determination of heavy elements from natural waters. The designing of the sorbent involved UV-irradiation induced graft polymerization of acrylamide using N,N'-methylene-bis-acrylamide (MBA) as the crosslinker on the poly(propylene) base followed by chemical modification of the grafted membrane to generate crosslinked poly(hydroxamic acid) (PHA) groups in its pores. The synthesized PHA-membrane was found to preconcentrate U, V, Cu, Cr, Fe and Pb quantitatively (95%) from aqueous samples over a wide pH range of 4-9. The sorbed trace elements were quantified by direct analysis of the membrane using Energy Dispersive X-ray Fluorescence (EDXRF). To test the applicability of the developed sorbent to real samples, interference effect of common matrix elements like Na, K, Ca and Mg on the uptake of the analytes at sub µg mL(-1) level was studied. The PHA sorbent was found to be immune to interferences from Na, K and Mg up to 1000 µg mL(-1) and Ca up to 100 µg mL(-1) for an analyte concentration of 1 µg mL(-1). The method detection limit for EDXRF measurement was 6-30 ng using a 2 cm × 2 cm sorbent.

Extractive fixed-site polymer sorbent for selective boron removal from natural water.

Water contamination by boron is a widespread environmental problem. The World Health Organization (WHO) recommends maximum boron concentration of 2.4 mg L(-1) for drinking water. The paper presents a simple method for preparation of functionalized sheet sorbent for selective extraction of boron from natural water. The pores of commercially available poly(propylene) membrane were functionalized by room temperature in situ crosslinking of poly(vinylbenzyl chloride) with a cyclic diamine piperazine. The precursor membranes were chemically modified with N-methyl D-glucamine which is selective for boron. Characterization of membrane was carried out using scanning electron microscopy (SEM) and attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) techniques. The functionalized membrane has been characterized in terms of parameters that influence the sorption of boron from aqueous streams like pH, uptake capacity, contact time, effects of competing ions and reusability. The maximum boron sorption capacity determined experimentally was 28 mg g(-1). The studies showed that trace concentrations of boron were quantitatively removed from water at neutral pH. The developed fixed site polymer sorbent exhibited high sorption capacity and fast kinetics as compared to various sorbents reported in literature. It was successfully applied for the removal of boron from ground water and seawater samples in presence of high concentration of interfering ions.

Matrix supported tailored polymer for solid phase extraction of fluoride from variety of aqueous streams.

Fluoride related health hazards (fluorosis) are a major environmental problem in many regions of the world. It affects teeth; skeleton and its accumulation over a long period can lead to changes in the DNA structure. It is thus absolutely essential to bring down the fluoride levels to acceptable limits. Here, we present a new inorganic-organic hybrid polymer sorbent having tailored fixed-sites for fluoride sorption. The matrix supported poly (bis[2-(methacryloyloxy)-ethyl]phosphate) was prepared by photo-initiator induced graft-polymerization in fibrous and microporous (sheet) host poly(propylene) substrates. These substrates were conditioned for selective fluoride sorption by forming thorium complex with phosphate groups on bis[2-methacryloyloxy)-ethyl] phosphate (MEP). These tailored sorbents were studied for their selectivity towards fluoride in aqueous media having different chemical conditions. The fibrous sorbent was found to take up fluoride with a faster rate (15 min for ≈76% sorption) than the sheet sorbent. But, the fluoride loading capacity of sheet sorbent (4,320 mg kg(-1)), was higher than fibrous and any other sorbent reported in the literature so far. The sorbent developed in the present work was found to be reusable after desorption of fluoride using NaOH solution. It was tested for solid phase extraction of fluoride from natural water samples.

Evaluation of the role of enzymatic and nonenzymatic antioxidant systems in the radiation resistance of Deinococcus.

Antioxidant enzymes and antioxidant metabolites appear to have different roles in the oxidative stress resistance responses of radiation-resistant bacteria belonging to the Deinococcus-Thermus group. Twelve distinct strains belonging to 7 Deinococcus species were characterized for their responses to hydrogen peroxide, ciprofloxacin, and ionizing radiation. The levels of catalase and peroxidase activities in these strains showed a positive correlation with resistance to hydrogen peroxide and ciprofloxacin. However, the levels of these enzymes and carotenoids did not appear to contribute significantly to radiation resistance. Our findings support the idea that enzymatic defense systems are not sufficient to account for the extreme radiation resistance of Deinococcus species. Consistent with previously published reports, the Deinococcus strains had high intracellular manganese/iron ratios. No significant correlation was found between intracellular manganese/iron ratios and radiation resistance within different Deinococcus species, suggesting that other components are involved in conferring radiation resistance.

Radiation resistance of Deinococcus radiodurans R1 with respect to growth phase.

Deinococcus species exhibit an extraordinary ability to withstand ionizing radiation (IR). Most of the studies on radiation resistance have been carried out with exponential phase cells. The studies on radiation resistance of Deinococcus radiodurans R1 with respect to different phases of growth showed that late stationary phase cells of D. radiodurans R1 were fourfold more sensitive to IR and heat as compared with exponential or early stationary phase cells. The increased sensitivity of D. radiodurans R1 to IR in the late stationary phase was not due to a decrease in the intracellular Mn/Fe ratio or an increase in the level of oxidative protein damage. The resistance to IR was restored when late stationary phase cells were incubated for 15 min in fresh medium before irradiation, indicating that replenishment of exhausted nutrients restored the metabolic capability of the cells to repair DNA damage. These observations suggest that stress tolerance mechanisms in D. radiodurans R1 differ from established paradigms.

Characterization of As (V), As (III) by selective reduction/adsorption on palladium nanoparticles in environmental water samples.

Hydrazine (HZ) and sodium borohydride (BH) are commonly used reagents for the production of palladium nanoparticles (PdNP) in aqueous solution and also for the reduction of arsenic from higher oxidation state to lower oxidation state. A methodology based on the quantitative adsorption of reduced arsenic species on PdNP generated in situ by BH and HZ is described to characterize As (V) and As (III) in environmental water samples. It was observed that PdNP obtained by BH gave quantitative recovery of As (V) and (III) and the PdNP obtained by HZ could account for As (III). The reduced palladium particles are collected and dissolved in minimum amount of nitric acid. The quantification of arsenic was carried out using GFAAS. Optimization of the experimental conditions and instrumental parameters were investigated in detail. The proposed procedure was validated by applying it for the determination of the content of total As in Certified Reference Material BND 301-02 (NPL, India). The detection limit of arsenic in environmental water samples was 0.029 microg L(-1) with an enrichment factor of 50. The relative standard deviation (R.S.D.) for 10 replicate measurements of 5 microg mL(-1) was 4.2%. The proposed method was successfully applied for the determination of sub ppm to ppm levels of arsenic (V), (III) in environmental water samples.

Direct determination of uranium in seawater by laser fluorimetry.

A method for estimation of uranium in seawater by using steady state laser flourimetry is described. Uranium present in seawater, in concentration of approximately 3 ng ml(-1) was estimated without prior separation of matrix. Quenching effect of major ions (Cl(-), Na(+), SO(4)(-), Mg(+), Ca(+), K(+), HCO(3)(-), Br(-)) present in seawater on fluorescence intensity of uranium was studied. The concentration of phosphoric acid required for maximum enhancement of fluorescence intensity was optimized and was found to be 5%. Similarly the volume of concentrated nitric acid required to eliminate the quenching effect of chloride and bromide completely from 5 ml of seawater were optimized and was found to be 3 ml. A simple equation was derived using steady state fluorescence correction method and was used for calculation of uranium concentration in seawater samples. The method has a precesion of 1% (1s, n=3). The values obtained from laser fluorimetry were validated by analyzing the same samples by linear sweep adsorptive stripping voltametry (LSASV) of the uranium-chloranilic acid (2,5-dichloro-3,6-dihydroxy-1,4-benzoquinone) complex. Both the values are well in agreement.

Quantitative evaluation of 28 mineral elements by inductively coupled plasma/mass spectrometry and its application in source identification of Indian opium.

An analytical method based on inductively coupled plasma/mass spectrometry (ICP/MS) was developed for the determination of 28 mineral elements (Cr, Mn, Co, Ni, Cu, Zn, Ga, Sr, Cd, Ag, Ba, Pb, Bi Y, La, Ce, Nd, Pr, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) in Indian opium samples. The detection limits were found to be in the range of 0.0008-0.45 ng/mL. The recoveries of spiked samples for each element were found to be in the range of 83-106%, with a precision of less than 9%. A total of 124 opium samples from India were analyzed for the distribution pattern of the 28 mineral elements. Quantitative elemental data were subjected to chemometric analysis in order to determine an optimal classifier to evaluate the source of Indian opium. The study indicated that mineral elements might not be the suitable discriminators for the discrimination of licit opium-growing divisions of India. However, the methodology developed and the analytical data on elemental profile may find important forensic application in discriminating Indian opium with that of licit and illicit opium originating from different geographical regions of world.