Malaria has developed as a serious worldwide health issue as a result of the introduction of resistant Plasmodium species strains. Because of the common chemo resistance to most of the existing drugs on the market, it poses a severe health problem and significant obstacles in drug research. Malaria treatment has evolved during the last two decades in response to Plasmodium falciparum drug sensitivity and a return of the disease in tropical areas. Plasmodium falciparum is now highly resistant to the majority of antimalarial drugs. The parasite resistance drew focus to developing novel antimalarials to combat parasite resistance. The requirement for many novel antimalarial drugs in the future year necessitates adopting various drug development methodologies. Different innovative strategies for discovering antimalarial drugs are now being examined here. This review is primarily concerned with the description of newly synthesized antimalarial compounds, i.e. Tafenoquine, Cipargamin, Ferroquine, Artefenomel, DSM265, MMV390048 designed to improve the activity of pure antimalarial enantiomers. In this review, we selected the representative malarial drugs in clinical trials, classified them with detailed targets according to their action, discussed the relationship within the human trials, and generated a summative discussion with prospective expectations.
INTRODUCTION: It is critical to measure the maximum voluntary bite force of patients receiving restorative dentistry. A new device known as "BYTE" has been developed indigenously to measure bite force in humans. The purpose of this study is to evaluate the BYTE device's consistency and accuracy in a lab setting. METHODOLOGY: Testing and calibration were done in the laboratory. The calibration machine with load cell pressed the biting part of the device with various forces from 3 N to 444 N in 3 N increments for two to three seconds each. The recorded force value in Newton by the device was noted down. RESULTS: At numerous standard loads, the minimum accuracy error is 0.333 N, while the maximum is 1.667 N. It marginally underestimates the load with an average accuracy error of 0.833 N. CONCLUSION: The calibration report showed that the BYTE device is precise and reliable and can be used to measure maximum bite force.
Enamel demineralization is a very common occurrence around bonded brackets in an orthodontic practice. Fluoride (FLR) applications have been used to prevent decalcification and further progression of white spot lesions. The purpose of this systematic review and meta-analysis was to systematically appraise available literature on the effectiveness of fluoride mouthrinse in the prevention of demineralization around fixed orthodontic appliances. A search was conducted for randomized controlled clinical trials among four electronic databases (MEDLINE, Google Scholar, PubMed, and Cochrane Review) through MeSH terms and keywords. Studies were excluded if random allocation was not conducted, or if they were animal or in vitro studies. About 146 articles were screened and 5 studies were selected for the present review. Only two studies were selected for MA due to variations in the measurement of outcomes among studies. This review concluded that rinsing with FLR in the course of the fixed orthodontic treatment lessens demineralization around the bracket. Using FLR mouthrinse to inhibit the formation of white spot lesions or dental caries in patients with multiple cavities or restoration can be considered in clinical practice.
Genetic variability is essential for the development of new crop varieties with economically beneficial traits. The traits can be inherited from wild relatives or induced through mutagenesis. Novel genetic elements can then be identified and new gene functions can be predicted. In this study, forward and reverse genetics approaches were described, in addition to their applications in modern crop improvement programs and functional genomics. By using heritable phenotypes and linked genetic markers, forward genetics searches for genes by using traditional genetic mapping and allele frequency estimation. Despite recent advances in sequencing technology, omics and computation, genetic redundancy remains a major challenge in forward genetics. By analyzing close-related genes, we will be able to dissect their functional redundancy and predict possible traits and gene activity patterns. In addition to these predictions, sophisticated reverse gene editing tools can be used to verify them, including TILLING, targeted insertional mutagenesis, gene silencing, gene targeting and genome editing. By using gene knock-down, knock-up and knock-out strategies, these tools are able to detect genetic changes in cells. In addition, epigenome analysis and editing enable the development of novel traits in existing crop cultivars without affecting their genetic makeup by increasing epiallelic variants. Our understanding of gene functions and molecular dynamics of various biological phenomena has been revised by all of these findings. The study also identifies novel genetic targets in crop species to improve yields and stress tolerances through conventional and non-conventional methods. In this article, genetic techniques and functional genomics are specifically discussed and assessed for their potential in crop improvement.
Introduction: The measurement of bite force is increasingly gaining importance in dentistry. This preliminary report evaluates the maximum voluntary bite force (MVBF) of young healthy individuals with normal occlusion and correlates the effect of age and gender with the maximum bite force (MBF). Materials and Methods: 405 participants in the age group of 18 to 40 years were selected from the outpatient department meeting inclusion and exclusion criteria. MVBF was measured with the help of a digital device called "Byte" at incisors, right first molar, and left first molar region. Results: There was a strong correlation between age with bite force. Bite force increased with age. Males had more bite force than females. The posterior region had higher bite force than the anterior region. Conclusion: Measurement of bite force is very important for every patient undergoing restorative treatment. The "Byte" device was found to be very efficient.
Background: Recent advancements in three-dimensional (3D) printing have introduced novel materials for removable partial dentures (RPD) base fabrication, promising improved mechanical properties, and biocompatibility. Materials and Methods: In this study, three different RPD base materials were evaluated: conventional heat-cured acrylic resin (Control), biocompatible 3D-printed resin (Test Group A), and a novel nanocomposite 3D-printed resin (Test Group B). A total of 30 standardized RPD base specimens (n = 10 per group) were fabricated according to established protocols. Microstructural analysis was performed using scanning electron microscopy (SEM), and the mechanical properties, including flexural strength and modulus, were determined using a universal testing machine. Results: Microstructural analysis revealed distinct differences among the materials. SEM images showed a well-defined and homogeneous microstructure in Test Group B, while Test Group A exhibited fewer voids compared to the Control group. Mechanical testing results indicated that Test Group B had the highest flexural strength (120 ± 5 MPa), followed by Test Group A (90 ± 4 MPa), and the Control group (75 ± 3 MPa). Similarly, Test Group B demonstrated the highest flexural modulus (3.5 ± 0.2 GPa), followed by Test Group A (2.8 ± 0.1 GPa), and the Control group (2.1 ± 0.1 GPa). Conclusion: These findings suggest that 3D-printed RPD base materials, particularly nanocomposite resins, hold promise for improving the overall quality and durability of removable partial dentures.
Background: Oral care is one of the fundamental nursing care procedures used to decrease oral colonization, dental plaque, respiratory infections, patient stay, and cost. The importance of good oral hygiene for patients in intensive care units (ICUs) is well recognized, however, the most effective way to achieve good oral care in the ICU is unclear. Therefore, the aim of this study was to assess the knowledge, attitude, and practice of nursing professionals regarding oral healthcare in ICUs among various medical institutes across India. Materials and methods: A questionnaire-based multicentric cross-sectional survey was conducted among registered nursing professionals employed at ICUs of three government tertiary healthcare centers (THC) of India: THC-I, THC-II, and THC-III located in the eastern and northern parts of India between February 2022 and July 2022. Results: A total of 150 nurses completed the questionnaire form (response rate: 62.5%) comprised of 49 (32.7%) males and 101 (67.3%) females with a mean age of 35.69 ± 7.7 years. Nursing officers' knowledge surpassed that of staff nurses regarding the duration of toothbrushing (p = 0.033). Among interinstitutional comparisons, THC-I nurses showed the greatest knowledge regarding the duration of toothbrushing and the mechanism of preventing saliva accumulation to reduce microbial growth (p = 0.013 and p = 0.003, respectively). Based on total work experience, participants were segregated into three groups: Group I (<7 years), group II (7.1-13.9 years), and group III (>14 years). Group II surpassed the knowledge of denture removal during sleep, cleaning after every meal, and storing in personalized air-tight containers (p = 0.001 and p = 0.036, respectively). The majority from group II recommended plain saline as the material for oral hygiene maintenance in ICU patients (p = 0.008). Group III predominantly practiced the ideal handwashing technique pre- and post-patient contact which was statistically significant (p = 0.001). Conclusion: This study observed that a knowledge gap exists among the nurses of the three institutes across India pertaining to the oral hygiene care of ICU patients. Nurse's education and implementation of the proper oral hygiene measures for intubated patients in ICU setup is an essential need. How to cite this article: Kumar S, Singh B, Mahuli AV, Kumar S, Singh A, Jha AK. Assessment of Nursing Staff's Knowledge, Attitude and Practice Regarding Oral Hygiene Care in Intensive Care Unit Patients: A Multicenter Cross-sectional Study. Indian J Crit Care Med 2024;28(1):48-57.
The growing need to examine the adsorption capabilities of innovative materials in real-world water samples has encouraged a shift from single to multicomponent adsorption systems. In this study, a novel composite, PANI-g-SM was synthesized by covalently grafting a lignocellulosic biomass, Saccharum munja (SM) with polyaniline (PANI). The as-synthesized composite was investigated for the simultaneous adsorption of cationic (Methylene Blue (MB); Crystal Violet (CV)) and anionic dyes (Reactive Red 35 (RR); Fast Green FCF (FG)) from four single components and two binary systems, MB + RR and CV + FG. Further, the effect and interaction of pH (2-11), dosage (0.01-0.04 g/10 mL), and initial concentration (0.0313 to 0.1563 mmol/L) on the elimination of dyes by PANI-g-SM were studied through a novel design of Box-Behnken of Response Surface Methodology (RSM) technique which was found to be highly useful for revealing the chemistry of interfaces in multi-component systems. The extended Langmuir model for the binary system indicated the presence of synergism, as result the maximum monolayer adsorption capacity increased by 44.44%, 645.83%, 67.88%, and 441.07% for MB, RR, CV, and FG dye, respectively. Further, the adsorption process mainly followed a pseudo-second-order kinetic model, and the thermodynamic studies revealed the exothermic nature of adsorption for RR and FG dye while endothermic for MB and CV dye, respectively with Δ G varying from - 1.68 to - 6.12 kJ/mol indicating the spontaneity of the process. Importantly, the efficacy of the composite was evaluated for the treatment of textile industry effluent highlighting its potential as an adsorbent for wastewater treatment.
In this study, we are reporting for the first time the utilization of Solanum tuberosum tuber-driven, starch-mediated, green-hydrothermally synthesized cerium oxide nanoparticles (G-CeO2 NPs) for the antibacterial activity and photodegradation of cationic (methylene blue, MB) and anionic (methyl orange, MO) dyes separately and in combination, aimed at environmental remediation. The XRD analysis confirms the fluorite structure of G-CeO2 NPs, displaying an average crystallite size of 9.6 nm. Further, XPS confirms the existence of 24% of Ce3+ oxidation states within G-CeO2 NPs. Morphological studies through FE-SEM and TEM reveal that starch-driven OH- ion production leads to a high percentage of active crystal facets, favoring the formation of Ce3+-rich CeO2 NPs. Photocatalytic experiments conducted under UV-A illumination demonstrate the superior degradation performance of G-CeO2 NPs, with MB degradation reaching 93.4% and MO degradation at 77.2% within 90 min. This outstanding catalytic activity is attributed to the mesoporous structure (pore diameter of 5.63 nm) with a narrow band gap, a large surface area (103.38 m2g-1), and reduced charge recombination, as validated by BET, UV-visible, and electrochemical investigations. The identification of photogenerated intermediates is achieved through LCMS, while the mineralization is monitored via total organic carbon analysis. Moreover, the scavenging experiments point towards the involvement of reactive oxygen species in organic oxidation, demonstrating efficiency over five consecutive trials. Additionally, G-CeO2 NPs exhibit potent antibacterial activity against both gram-positive and gram-negative bacteria. This study presents an innovative, and efficient approach to environmental remediation, shedding light on the potential of G-CeO2 NPs in addressing environmental pollution challenges.
Cerium , Nanoparticles , Solanum tuberosum , Anti-Bacterial Agents/chemistry , Gram-Negative Bacteria , Gram-Positive Bacteria , Nanoparticles/chemistry , Cerium/pharmacology , Cerium/chemistry
The rational construction of free-standing and flexible electrodes for application in electrochemical energy storage devices and next-generation supercapacitors is an emerging research focus. Herein, we prepared a redox-active ferrocene dicarboxylic acid (Fc)-based nickel metal-organic framework (MOF) on electrospun carbon nanofibers (NiFc-MOF@CNFs) via an in situ approach. This in situ approach avoided the aggregation of the MOF. The NiFc-MOF@CNF flexible electrode showed a high redox-active behavior owing to the presence of ferrocene and flexible carbon nanofibers, which led to unique properties, including high flexibility and lightweight. Furthermore, the prepared electrode was utilized in a supercapacitors (SC) without the use of any binder, which achieved a specific capacity of 460 C g-1 at 1 A g-1 with an excellent cyclic retention of 82.2% after 25 000 cycles and a good rate capability. A flexible asymmetric supercapacitor device was assembled, which delivered a high energy density of 56.25 W h kg-1 and a long-lasting cycling performance. Also, the prepared electrode could be used as a freestanding electrode in flexible devices at different bending angles. The obtained cyclic voltammetry curves showed negligible changes, indicating the high stability and good flexibility of the electrode. Thus, the use of the in situ strategy can lead to the uniform growth of redox-active MOFs or other porous materials on CNFs.
OBJECTIVE: The objective is to comparatively assess the impact strength and flexural strength of polyether ether ketone (PEEK) vs. computer-aided design/computer-aided manufacturing (CAD/CAM) polymethyl methacrylate denture base material. METHODS: A total of 90 samples were fabricated with traditional heat cure PMMA, PEEK, and CAD/CAM PMMA and divided into three groups of 30 samples each. The impact strength of all the samples was measured using an Izod impact tester with a pendulum in the air at 23±2°C. A three-point bending test was used in a Universal Testing Machine to assess the flexural strength of all the samples. The impact strength and flexural strength mean values were computed using a one-way ANOVA test. RESULT: Impact strength and flexural strength of PEEK (IS=10.22±1.25 kJ/m2 and FS=120±8.0 MPa) is almost identical to CAD/CAM PMMA sample (IS=9.595±3.313 kJ/m2 and FS=118.11±5.00 MPa) whereas for conventional heat cure PMMA (IS=4.00±.011 kJ/m2 and FS=75.4±4.50 MPa) the values are least among the three. CONCLUSION: PEEK or CAD/CAM PMMA share almost identical and superior mechanical properties, and both can be used as better alternatives for complete denture fabrication rather than using conventional heat cure PMMA.
Introduction To mitigate the impact of the COVID-19 pandemic caused by the SARS-CoV-2 virus, global distribution of vaccines such as Covishield and Covaxin has been undertaken. This research aimed to assess the responses and potential differences between these vaccines by examining the presence and levels of SARS-CoV-2 IgG antibodies in healthcare professionals who received them. Methodology A comprehensive cross-sectional study was conducted at a tertiary care facility in Ranchi involving 227 healthcare professionals who had completed both doses of either Covishield or Covaxin. Blood samples were collected and subjected to chemiluminescence immunoassay analysis to measure IgG antibodies. Demographic data, immunization records, and previous COVID-19 infections were recorded. Statistical analyses, including analysis of variance (ANOVA), linear regression, and independent sample t-tests were performed. Results Antibody titers exhibited variability, potentially influenced by factors. There was no difference in antibody titers between recipients of Covishield and Covaxin vaccines. Linear regression analysis revealed a correlation between antibody levels and the number of days after vaccination. Factors such as age, gender, blood group, and prior COVID-19 infections did not significantly impact antibody titers. Conclusions This study contributes to responses elicited by Covishield and Covaxin vaccines among healthcare workers. The results highlight that Covishield showed a higher mean titer value than Covaxin, which is not statistically significant. The overall model showed statistically significant results indicating age, type of vaccine, number of days after vaccination, blood group, and previous history of COVID-19 infection collectively influenced the CoV-2 IgG titer values. The findings indicate that age, number of days after vaccination, and prior history of COVID-19 infection have substantial relationships with the CoV-2 IgG titer, but sex, vaccine type, and blood group show lesser, nonsignificant associations.
Restoration of hemimandibulectomy defects following tumour extirpation to restore oral function is a herculean task for practitioners. Prosthetic treatment alternatives available for rehabilitation of acquired hemimandibulectomy defects according to mandibular reconstruction type and extent (Cantor-Curtis classification) are unclear. This systematic review aims to assess the spectrum of prosthodontic rehabilitation approaches with regard to reconstruction type and extent of mandibular surgical defects. The databases incorporated for literature search were Google Scholar and Medline (PubMed). Relevant search terms for hemimandibulectomy and reconstruction with prosthetic rehabilitation were used. Two reviewers independently assessed the articles using eligibility criteria; published case reports and case series in the English language and depicting prosthodontic treatment modality of patients greater than 15 years were included. A total of 202 records were identified from the database search of which 19 duplicates were removed. The remaining articles were assessed for eligibility, and 55 articles (comprising 58 cases) were finally included in the study. This review revealed various prosthetic alternatives ranging from guide flange, twin occlusion, palatal ramp, conventional to hybrid partial and complete dentures to implant-supported prosthesis including a few innovative prosthetic approaches. This systematic review provides a plethora of prosthodontic rehabilitation approaches according to the extent of hemimandibular surgical defect and type of reconstruction. This will facilitate practitioners and prosthodontists in sequential treatment planning and management of hemimandibulectomy cases in their routine practice.
Trialeurodes vaporariorum, commonly known as the greenhouse whitefly, severely infests important crops and serves as a vector for apple scar skin viroid (ASSVd). This vector-mediated transmission may cause the spread of infection to other herbaceous crops. For effective management of ASSVd, it is important to explore the whitefly's proteins, which interact with ASSVd RNA and are thereby involved in its transmission. In this study, it was found that a small heat shock protein (sHsp) from T. vaporariorum, which is expressed under stress, binds to ASSVd RNA. The sHsp gene is 606 bp in length and encodes for 202 amino acids, with a molecular weight of 22.98 kDa and an isoelectric point of 8.95. Intermolecular interaction was confirmed through in silico analysis, using electrophoretic mobility shift assays (EMSAs) and northwestern assays. The sHsp22.98 protein was found to exist in both monomeric and dimeric forms, and both forms showed strong binding to ASSVd RNA. To investigate the role of sHsp22.98 during ASSVd infection, transient silencing of sHsp22.98 was conducted, using a tobacco rattle virus (TRV)-based virus-induced gene silencing system. The sHsp22.98-silenced whiteflies showed an approximate 50% decrease in ASSVd transmission. These results suggest that sHsp22.98 from T. vaporariorum is associated with viroid RNA and plays a significant role in transmission.
Heat-Shock Proteins, Small , Hemiptera , Plant Viruses , Animals , Heat-Shock Proteins, Small/genetics , Plant Viruses/genetics , RNA , Hemiptera/genetics
The bright photoluminescence (PL) of colloidal CdSe quantum dots (QDs) makes them interesting for optical applications. For most of them, well-defined PL properties, dominated by a single excitonic state, are required. However, in many PL experiments with QD ensembles, multiexponential decay was observed. On the basis of spin-orbit density functional theory and screened configuration interaction calculations, we show that highly symmetric and defect-free CdSe QDs with diameters of 1.7 and 2.0 nm possess a multiexponential low-temperature PL at the single-dot level. This is a consequence of ligand-induced symmetry breaking with a subsequent rearrangement of the lowest eight excitonic states in two sets of four singly degenerate excitonic states. For each set, the lowest state is dark and the other three are bright. We find that the splitting between the sets can be modified by the coverage and choice of the ligand, which facilitates the engineering of the PL properties of CdSe QDs.
Pulmonary aspergillosis is a well-recognized fungal lung disease caused by the Aspergillus species (especially Aspergillus fumigatus). Allergic bronchopulmonary aspergillosis (ABPA) is milder form of pulmonary aspergillosis compared to other more invasive forms. However, if left untreated, ABPA can cause significant lung damage. We present the case of a 33-year-old man who came with complaints of shortness of breath, chest discomfort, and productive cough. The patient underwent High Resolution Computed Tomography (HRCT) scan of the chest which, suggested the diagnosis of ABPA with secondary tension pneumothorax.
Aspergillosis, Allergic Bronchopulmonary , Pneumothorax , Pulmonary Aspergillosis , Male , Humans , Adult , Aspergillosis, Allergic Bronchopulmonary/complications , Aspergillosis, Allergic Bronchopulmonary/diagnosis , Pneumothorax/etiology , Pneumothorax/complications , Antifungal Agents/therapeutic use , Lung , Pulmonary Aspergillosis/complications
Tomato crop is known to be infected by large number of viruses across the globe causing severe losses in its yield. Accurate information on the distribution and incidence of different viruses is essential to implement virus control strategies. This study provides information on prevalence and distribution of different viruses infecting tomato crop in North-western region of India. Leaf samples of 76 symptomatic tomato and 30 symptomatic and asymptomatic plants of Chenopodium sp. (weed) were collected from eight villages. DAS-ELISA and/or RT-PCR/PCR were used to detect occurrence of nineteen viruses and one viroid in tomatoes. Nine viruses viz. cucumber mosaic virus, groundnut bud necrosis virus, potato virus M, potato virus S, potato virus X, potato virus Y, tomato chlorosis virus, tomato leaf curl New Delhi virus and tomato mosaic virus were detected in 58 of 76 tomato samples. Detection of viruses was confirmed by cloning of specific amplicons followed by sequencing and submission of sequences to the GenBank database. None of the targeted pathogens were found in collected weed samples. Tomato leaf curl New Delhi virus (ToLCNDV) was the most prevalent virus (64.47%) followed by potato virus Y (PVY) (23.68%). Double, triple, quadruple and quintuple infections were also noticed. Phylogenetic analysis of nucleotide sequences was also carried out. Nine viruses infecting tomato crop from North-western region of India were detected. ToLCNDV was most prevalent with highest incidence. To the best of our knowledge, this is the first report of ToCV on tomato from India. Supplementary Information: The online version contains supplementary material available at 10.1007/s13337-022-00801-y.
CD44 + /CD24 - phenotype has been associated with stem cell-like characteristics with enhanced invasive properties, radiation resistance, and with distinct genetic profiles suggesting a correlation to adverse prognosis in western literature. The aim of this study was to study CD44 + /CD24 - phenotype as an adverse prognostic marker in Indian breast cancer patients. N = 61 breast cancer patients included in a tertiary care facility in India were evaluated for receptor studies (estrogen receptor ER, progesterone receptor PR, Herceptin antibody Her2 neu receptor, CD44 & CD24 stem cell markers). CD44 + /CD24 - phenotype was statistically related to adverse factors like estrogen and progesterone receptors non-expression, her 2 neu expression, and triple-negative breast cancer. Of the 39 patients with ER-ve status, 33 (84.6%) were found to have CD44 + /CD24 - phenotype and 82.5% of all the CD 44 + /CD24 - patients were ER negative (p = 0.001). Thirty-four (75.5%) of the PR-ve patients showed the CD44 + /CD24 - phenotype, and of all the CD 44 + /CD24 - patients, 85% of were PR negative (p = 0.006). Thirty-six (75%) of Her-2-Neu + ve were CD44 + /CD24 - . Approximately 90% of the Her 2 Neu patients expressed CD44 + /CD24 - and 76.9% of all the triple-negative patients were found to be CD44 + /CD24 - expression (p = 0.001). CD44 + /CD24 - had a significant association with adverse prognostic factors like stage of disease, hormonal receptor status, and molecular subtypes in Indian breast cancer patients like the Western data.
