Herein, we report a novel strategy toward non-volatile optical memory with high-contrast, high-speed recording, and non-destructive readout capability based on the cooperative out-of-plane orientation of a fluorescent dye doped into azobenzene liquid crystalline polymer film. By employing the out-of-plane orientation switching upon irradiation with UV light and thermal heating, high-contrast turn-on fluorescence switching was successfully achieved and the optical recording was demonstrated with non-destructive fluorescence readout capability. Furthermore, the recording speed and the fluorescence on/off contrast in the present system were dramatically improved compared to the previous in-plane orientation mode.
Photoswitching molecules that reversibly switch upon visible-light irradiation are some of the most attractive targets for biological and imaging applications. In this study, we found a diarylethene (DAE) derivative having a covalently attached perylenebisimide (PBI) unit (DAE-PBI dyad) underwent an unexpected cyclization reaction upon irradiation with green (500-550 nm) light, where the DAE unit has no absorbance. The photoreactivity was enhanced in solvents containing heavy atoms and in the presence of oxygen. As inferred from the solvent dependence and the calculated excited-state energies of DAE and PBI units, it was suggested that the probable mechanism for this unique visible-light-induced cyclization reaction is multiplicity conversion based on intramolecular energy transfer from the excited singlet state of the PBI unit to the triplet state of DAE units (i.e., DAE-1[PBI]* â 3[DAE]*-PBI). Such a unique photoreaction mechanism with the assistance of oxygen will pave the way for new molecular design for the development of visible-light switching molecules.
Light , Oxygen , Cyclization , Energy Transfer , Solvents
Photochemical switching of cytotoxicity by using spiropyran compounds with pyridinium and alkyl groups was investigated. The spiropyran compound, SP6, with a hexyl group as the alkyl group displayed negative photochromism, in which the hydrophilic open merocyanine form (MC form) was stable and isomerized to the hydrophobic closed spiro form (SP form) by visible light irradiation. Both MC and SP forms exhibited amphiphilicity because of the hydrophobic hexyl and hydrophilic pyridinium groups introduced. Cytotoxicity toward HeLa cells was observed for both MC and SP forms of SP6 at concentrations higher than the critical aggregation concentration of the isomers CACMC and CACSP (CACMC > CACSP), respectively. In contrast, cytotoxicity by SP6 was activated by visible light irradiation at concentrations between CACMC and CACSP; thus, photochemical switching of cytotoxicity from the OFF to ON state was achieved. Cytotoxicity was revealed to be caused by disruption of the cell membrane. The results provide an important step in developing novel next-generation photochemotherapy drugs.
In this study, three-dimensional network architectures are constructed using nano-sized graphene oxide (nGO) as the building block. The cross-linking reaction of nGO is conducted in sub-micrometre water droplets in an emulsion system to control the size of the networks by restricting the reaction space. Two types of three-dimensional GO networks with different cross-linking lengths were constructed, and their methyl orange adsorption and release behaviours were investigated under external stimuli, such as thermal treatment, ultrasonic wave treatment and near-infrared light irradiation.
A photoswitchable near-infrared (NIR) fluorescent nanoparticle (NP) was designed and prepared. The NP showed a characteristic AIE property and high-contrast NIR fluorescence photoswitching with full reversibility. Such efficient NIR fluorescence photoswitching originated from the amplified fluorescence quenching mechanism based on intermolecular energy transfer in a densely packed NP state.
Fluorescence Resonance Energy Transfer , Fluorescent Dyes/chemistry , Nanoparticles/chemistry , Infrared Rays , Microscopy, Fluorescence , Molecular Structure , Photochemical Processes
Vesicles or micelles prepared from amphiphiles with azobenzene (Az) moieties and long alkyl chains have attracted much attention in drug delivery systems. To induce release behavior from smart carriers via trans-cis photoisomerization of the Az groups, UV light exposure is typically used, but it can damage DNA and hardly penetrates cells. In this paper, Az-containing phospholipids without long alkyl tails were designed and synthesized; in these compounds, the end group of the Az moiety was substituted with a -NO2 and -OCH3 group (abbreviated N6 and M6, respectively). N6 self-assembled into H-aggregates with an interdigitated bilayered structure in water through the antiparallel orientation due to π-π interactions of the Az group, the attractive van der Waals forces, and the interactions and bending behavior of the phosphocholine groups. Vesicles showing visible light stimuli-responsive behavior were obtained by mixing N6 and M6, and the release of encapsulated calcein was triggered by visible light.
A highly fluorescent diarylethene single crystal was successfully designed and prepared. The crystal shows efficient "turn-off" fluorescence photoswitching with full reversibility. This might have originated from the amplified fluorescence quenching due to the intermolecular energy transfer process in the densely packed and well-ordered single crystal.
Herein, we report on wavelength-selective and high-contrast multicolour fluorescence photoswitching between white-, orange-, cyan-, and dark-colours in a mixture of two distinguishable emission-coloured photochromic nanoparticles composed of different pairs of a photoswitching unit and a fluorescence unit.
The phase transition of a nematic liquid crystal containing a push-pull azobenzene dye could be induced efficiently during irradiation with visible light. The dynamical disorganizing effect of the push-pull azobenzene dye on the liquid crystalline order through its trans-cis-trans photoisomerizaion cycle under visible light was contributed to the efficient phase transition. Then, the effects of light irradiation on the motion of small objects dispersed in the liquid crystals containing the push-pull azobenzene were explored, and the manipulation and assembly of those objects were successfully achieved in the nematic phase but also in the smectic phase. The combination of the photo-controlled dynamical change in the liquid crystalline order and the intrinsic self-assembly property of a liquid crystal is promising for use in technologies that require not only the organization of small objects but also the photo-driving of nano- and micro-sized mechanical materials.
Incorporation of an azobenzene core into tethered bis(trityl alcohol) allows the photoswitchable arrangement of the two trityl alcohol units through photoisomerization of azobenzene. The differently arranged trityl alcohol units change their cooperative function to reflect the positional relationships, and thus, the activity as a cooperative acid can be controlled by light stimuli.
Alcohols/chemistry , Azo Compounds/chemistry , Catalysis , Light , Photochemical Processes , Spectrum Analysis , Stereoisomerism
Modulation of the refractive index of a polymer was achieved by combining it with diamond nanoparticles (NDs). The increase in the refractive index was controlled by the amount of NDs added, according to the Lorentz-Lorenz equation. The refractive index of poly(vinyl alcohol) (PVA), which was used as the base polymer, increased from 1.52 to 1.88. A multilayer film consisting of alternating layers of ND-PVA composite and poly(methyl methacrylate) exhibited ca. 80% reflectance with 10 bilayers.
Nanoparticles/chemistry , Polymers/chemistry , Crystallization , Diamond , Glass , Metals/chemistry , Optics and Photonics , Oxides/chemistry , Particle Size , Polyvinyl Alcohol/chemistry , Refractometry , Silicon/chemistry , Spectrophotometry, Ultraviolet/methods
A photo-responsive multi-bilayered film consisting of azobenzene polymer liquid crystals (PA6Az1) and poly(vinyl alcohol) (PVA) has been prepared on a glass substrate by alternate spin coating of the polymer solutions. The reflectivity of the multi-bilayered film disappears by annealing at 80 °C. The disappearance of the reflection by the annealing is related to the thermal out-of-plane molecular orientation of PA6Az1 even in the multi-bilayered film, which leads to a very small difference in refractive indices between PA6Az1 and PVA. The reflectance of the multi-bilayered film is increased again by UV irradiation because of the transformation from the out-of-plane orientation to an in-plane random orientation. In this way, on-off switching of the reflection is achieved by combination of the thermally spontaneous out-of-plane molecular orientation and following photoisomerization of PA6Az1 comprising the multi-bilayered film.
Azo Compounds/chemistry , Liquid Crystals/chemistry , Paper , Photochemical Processes , Polyvinyl Alcohol/chemistry
In this paper the photocontrolled manipulation of solid materials on the surface of a liquid crystalline thin film is described. Three different types of films namely cholesteric liquid crystal (ChLC), compensated nematic liquid crystal (NLC) and nematic LC were used. The rotational and translational manipulation of the microscale solid object was induced by irradiation of light and mode of manipulation (either translational or rotational) was changed by changing the isomer of the azobenzene compound used to make the film. Rotational motion of the object was observed on the ChLC and compensated NLC films containing chirally pure azobenzene compound. The direction of rotational motion was controlled either by changing the optical isomer of the chiral azobenzene or by changing the irradiating light (from ultraviolet to visible). When racemic mixture of the chiral azobenzene compound was used, a translational motion of the object was observed. Even though the direction of the translational motion can be controlled by controlling irradiation position, more facile and precise manipulation of the objects was possible by spatially controlled irradiation of Ar(+) laser and diode UV laser.
On the move: Irradiation of azobenzene-doped liquid crystalline films with UV/Vis light results in the photocontrolled translational motion of microscale solid object on the surface, which occurs through cis-trans isomerization of the azobenzene unit. Irradiation with an Ar(+) laser (488 nm) resulted in precise control of the translational motion so that the particle always moved away from the irradiation position (see picture).
Five photochromic chiral azobenzene compounds and one nonphotochromic chiral compound were synthesized and characterized by IR, 1H NMR spectroscopy, and elemental analysis. Cholesteric liquid crystalline phases were induced by mixing of the nonphotochromic chiral compound and one of the photochromic chiral azobenzene compounds in a host nematic liquid crystal (E44). The helical pitch of the induced cholesteric phase was determined by Cano's wedge method and the helical twisting power (HTP) of each sample was thus determined. The helical twisting powers of azobenzene compounds were decreased upon UV irradiation, due to trans-->cis photoisomerization of azobenzene molecules. Among the azobenzene compounds synthesized in our study, Azo-5, with isomannide (radical) as chiral photochromic dopant, showed the highest HTP and contrast ratio (Tmax/Tmin). Photoswitching between compensated nematic phase and cholesteric phase was achieved through reversible trans<-->cis photoisomerization of the chiral azobenzene molecules through irradiation with UV and visible light, respectively. Transmission rates (contrast ratios) increased with decreasing helical pitch length in the induced cholesteric phase. The influence of helical twisting power on the photoswitching behavior of chiral azobenzene compounds is discussed in detail.
