Improved Bipolar Properties of Ester-Functionalized Discotic Diimine-Dithiolene Complexes.

A series of platinum diimine-dithiolene complexes with a 5,6-dihydro-1,4-dithiin-2,3-dithiolato (dddt2- ) dithiolene ligand and a bipyridine carrying tris-alkoxyphenyl fragments connected through an ester linker (bpyCn, n=8, 12, 16, 10(s), 20) (Scheme 1) has been developed. The mesomorphic properties of the ligands and of the platinum complexes have been investigated by a combination of DSC, POM and SAXS analyses. The platinum complexes were found to self-organize into columnar mesophases of hexagonal symmetry over large temperature range including room temperature. Their electronic properties were also characterized by a combination of electrochemistry, absorption and emission spectroscopy measurements and TD-DFT calculations. Besides being liquid crystalline, these compounds can undergo two oxidation processes and two reduction processes in a fully reversible manner, allowing the isolation of stable dicationic and dianionic species. Such a behavior is highly promising for the development of ambipolar semiconducting soft materials.

Electrochemical regulation of the band gap of single layer graphene: from semimetal to semiconductor.

As a semimetal with a zero band gap and single-atom-scale thickness, single layer graphene (SLG) has excellent electron conductivity on its basal plane. If the band gap could be opened and regulated controllably, SLG would behave as a semiconductor. That means electronic elements or even electronic circuits with single-atom thickness could be expected to be printed on a wafer-scale SLG substrate, which would bring about a revolution in Moore's law of integrated circuits, not by decreasing the feature size of line width, but by piling up the atomic-scale-thickness of an SLG circuit board layer by layer. Employing scanning electrochemical microscopy (SECM), we have demonstrated that the electrochemically induced brominating addition reaction can open and regulate the band gap of SLG by forming SLG bromide (SLGBr). The SLG/SLGBr/SLG Schottky junction shows excellent performance in current rectification, and the rectification potential region can be regulated by tuning the degree of bromination of SLG. This work provides a feasible and effective way to regulate the band gap of SLG, which would open new applications for SLG in micro-nano electronics and ultra-large-scale integrated circuits (ULSI).

Chemical Surface Grafting of Pt Nanocatalysts for Reconciling Methanol Tolerance with Methanol Oxidation Activity.

A conceptual challenge toward more versatile direct methanol fuel cells (DMFCs) is the design of a single material electrocatalyst with high activity and durability for both oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR). This requires to conciliate methanol tolerance not to hinder ORR at the cathode with a good MOR activity at the anode. This is especially incompatible with Pt materials. We tackled this challenge by deriving a supramolecular concept where surface-grafted molecular ligands regulate the Pt-catalyst reactivity. ORR and MOR activities of newly reported Pt-calix[4]arenes nanocatalysts (Pt CF 3 ${{_{{\rm CF}{_{3}}}}}$ NPs/C) are compared to commercial benchmark PtNPs/C. Pt CF 3 ${{_{{\rm CF}{_{3}}}}}$ NPs/C exhibit a remarkable methanol tolerance without losing the MOR reactivity along with outstanding durability and chemical stability. Beyond designing single-catalyst material, operable in DMFC cathodic and anodic compartments, the results highlight a promising strategy for tuning interfacial properties.

Highly stable silver nanohybrid electrocatalysts for the oxygen reduction reaction.

Silver nanoparticles (AgNPs) were deliberately functionalized via aryl diazonium chemistry with a monolayer of calix[4]arenes. The resulting nanohybrids show high efficiency and high selectivity toward the ORR in alkaline media along with an exceptional durability and a high methanol tolerance.

Ready-to-Use Germanium Surfaces for the Development of FTIR-Based Biosensors for Proteins.

Germanium is particularly suitable for the design of FTIR-based biosensors for proteins. The grafting of stable and thin organic layers on germanium surfaces remains, however, challenging. To tackle this problem, we developed a calix[4]arene-tetradiazonium salt decorated with four oligo(ethylene glycol) chains and a terminal reactive carboxyl group. This versatile molecular platform was covalently grafted on germanium surfaces to yield robust ready-to-use surfaces for biosensing applications. The grafted calixarene monolayer prevents nonspecific adsorption of proteins while allowing bioconjugation with biomolecules such as bovine serum albumin (BSA) or biotin. It is shown that the native form of the investigated proteins was maintained upon immobilization. As a proof of concept, the resulting calix[4]arene-based germanium biosensors were used through a combination of ATR-FTIR spectroscopy and fluorescence microscopy for the selective detection of streptavidin from a complex medium. This study opens real possibilities for the development of sensitive and selective FTIR-based biosensors devoted to the detection of proteins.

Strategies for the Formation of Monolayers From Diazonium Salts: Unconventional Grafting Media, Unconventional Building Blocks.

Pioneered by J. Pinson and coll. in 1990s, the reductive grafting of aryldiazonium salts has become a powerful method for surface functionalization. Highly robust interfaces result from this surface attachment, resistant to heat, chemical degradation and ultrasonication. Importantly, this approach can be applied to many materials, ranging from conducting, semi-conducting, oxides to insulating substrates. In addition, either massive, flat surfaces or nanomaterials can be functionalized. The method is easy to process and fast. The grafting process involves the formation of highly reactive aryl radicals able to attack the substrate. However, the generated radicals can also react with already-grafted aryl species, leading to the formation of loosely-packed polyaryl multilayer films, typically of 10-15 nm thick. It is thus highly challenging to control the vertical extension of the deposited layer and to form well-ordered monolayers from aryldiazonium salts. In this mini review, we briefly describe the different strategies that have been developed to prepare well-ordered monolayers. We especially focus on two strategies successfully used in our laboratories, namely the use of unconventional solvents, i.e., room temperature ionic liquids (RTILs), as grafting media and the use of calixarene macrocycles by taking benefit of their pre-organized structure. These strategies give large possibilities for the structuring of interfaces with the widest choice of materials and highlight the potential of aryldiazonium grafting as a competitive alternative to self-assembled monolayers (SAMs) of alkyl thiols.

Use of calixarenes bearing diazonium groups for the development of robust monolayers with unique tailored properties.

Surface modification represents an active field of research that finds applications, amongst others, in the development of medical devices, sensors and biosensors, anti-biofouling materials, self-cleaning surfaces, surfaces with controlled wettability, corrosion resistance, heterogeneous catalysis and microelectronics. For some applications, surface functionalization with a nanometric-size monolayer is desired. In this review, efforts to covalently functionalize a wide array of surfaces with calixarenes bearing diazonium groups are described. More specifically, methodologies to obtain monolayers of calix[4 or 6]arene derivatives on conductive, semi-conductive or insulating surfaces as well as on nanoparticles are presented. The main advantages of this general surface modification strategy (i.e. formation of true monolayers that can be post-functionalized, high robustness and control over the composition of the calixarene-based coating) and its current scope of applications and future challenges are discussed.

Electron Transfer Kinetics in a Deep Eutectic Solvent.

Electron transfer (ET) kinetic rate constants ks in Ethaline (1:2 choline chloride + ethylene glycol) have been measured for two common redox couples (ferrocene/ferrocenium and ferrocyanide/ferricyanide) on a glassy carbon electrode and compared with ET kinetics in ionic liquids and classical organic solvents in the same conditions (acetonitrile and water). Particular care has been taken to treat ohmic drop in DES. For both couples, we found that ET rate constants are just a little lower than those measured in classical solvents (around 50% or less). These results contrast with ET rates in ionic liquids where electron transfers are considerably slower (100 times lower). Data are discussed as a function of the solvent relaxation time using Marcus Theory for an adiabatic electron transfer.

Robust hydrophobic gold, glass and polypropylene surfaces obtained through a nanometric covalently bound organic layer.

The (electro)chemical grafting of a polyfluorinated calix[4]arene on gold, polypropylene and glass is reported. The modified surfaces were characterized by ellipsometry, atomic force microscopy (AFM), and by X-ray photoelectron spectroscopy (XPS). A nanometric, robust and uniform monolayer of covalently surface-bound calix[4]arenes was obtained on the three different materials. For all surfaces, contact angles higher than 110° were recorded, highlighting the hydrophobic character given by this ∼2 nm thin organic monolayer. Remarkably, the contact angle values remained unchanged after 18 months under a laboratory atmosphere. The results presented herein thus present an attractive and sustainable strategy for bringing hydrophobic properties to the interface of a wide range of materials.

Highly sensitive and rapid determination of sunset yellow in drinks using a low-cost carbon material-based electrochemical sensor.

Starting from simple graphite flakes, an electrochemical sensor for sunset yellow monitoring is developed by using a very simple and effective strategy. The direct electrochemical reduction of a suspension of exfoliated graphene oxide (GO) onto a glassy carbon electrode (GCE) surface leads to the electrodeposition of electrochemically reduced oxide at the surface, obtaining GCE/ERGO-modified electrodes. They are characterized by cyclic voltammetry (CV) measurements and field emission scanning electron spectroscopy (FE-SEM). The GCE/ERGO electrode has a high electrochemically active surface allowing efficient adsorption of SY. Using differential pulse voltammetry (DPV) technique with only 2 min accumulation, the GCE/ERGO sensor exhibits good performance to SY detection with a good linear calibration for concentration range varying 50-1000 nM (R2 = 0.996) and limit of detection (LOD) estimated to 19.2 nM (equivalent to 8.9 µg L-1). The developed sensor possesses a very high sensitivity of 9 µA/µM while fabricated with only one component. This electrochemical sensor also displays a good reliability with RSD value of 2.13% (n = 7) and excellent reusability (signal response change < 3.5% after 6 measuring/cleaning cycles). The GCE/ERGO demonstrates a successful practical application for determination of sunset yellow in commercial soft drinks. Graphical abstract.

Self-Assembled Monolayers of Redox-Active 4d-4f Heterobimetallic Complexes.

In this work, we report the preparation of functional interfaces incorporating heterobimetallic systems consisting in the association of an electroactive carbon-rich ruthenium organometallic unit and a luminescent lanthanide ion (Ln = Eu3+ and Yb3+). The organometallic systems are functionalized with a terminal hexylthiol group for subsequent gold surface modification. The formation of self-assembled monolayers (SAMs) with these complex molecular architectures are thoroughly demonstrated by employing a combination of different techniques, including infrared reflection absorption spectroscopy, ellipsometry, contact angle, and cyclic voltammetry measurements. The immobilized heterobimetallic systems show fast electron-transfer kinetics and, hence, are capable of fast electrochemical response. In addition, the characteristic electrochemical signals of the SAMs were found to be sensitive to the presence of lanthanide centers at the bipyridyl terminal units. A positive shift of the potential of the redox signal is readily observed for lanthanide complexes compared to the bare organometallic ligand. This effect is equally observed for preformed complexes and on-surface complexation. Thus, an efficient ligating recruitment of europium and ytterbium cations at gold-modified electrodes is demonstrated, allowing for an easy electrochemical detection of the lanthanide ions along with an alternative preparative method of SAMs incorporating lanthanide cations compared to the immobilization of the preformed complex.

Ambipolar Discotic Liquid Crystals Built Around Platinum Diimine-Dithiolene Cores.

Platinum diimine dithiolene complexes bearing mesogenic groups on one or both ligands have been prepared through an original ligand metathesis reaction to introduce the dithiolene ligand. The neutral diimine ligands, the intermediate platinum dichloride diimine complexes, and the target compounds were characterized by a combination of electronic (electrochemistry, absorption and emission spectroscopy, DFT calculations) and structural (SAXS, DSC) tools. Several novel liquid crystalline platinum diimine-dithiolene were identified over a large temperature range, and the systems were endowed with ambipolar properties, associated with the high reversibility of both oxidation and reduction processes.

The Ouzo effect to selectively assemble molybdenum clusters into nanomarbles or nanocapsules with increased HER activity.

Metal cluster nanoparticles are obtained by simple solvent shifting called the Ouzo effect. Remarkably, the assembly of [{Mo6Br8}L6]2- (L = Br- or NCS-) cluster units can be directed into nanomarbles or nanocapsules depending on the cluster chemistry. When deposited on electrodes, these nanoparticles show good activities in electrochemical water splitting under mild conditions.

Molecular Sieving and Current Rectification Properties of Thin Organic Films.

For the purpose of preparing well-organized functional surfaces, carbon and gold substrates were modified using electroreduction of a tetrahedral-shape preorganized tetra-aryldiazonium salt, leading to the deposition of ultrathin organic films. Characterization of the modified surfaces has been performed using cyclic voltammetry, X-ray photoelectron spectroscopy, infrared absorption spectroscopy, ellipsometry, atomic force microscopy, and contact angle measurements. The specific design of the tetra-aryldiazonium salts leads to an intrinsic structuring of the resulting organic films, allowing molecular sieving and current rectification properties toward redox probes in solution.

Reductive electrografting of in situ produced diazopyridinium cations: Tailoring the interface between carbon electrodes and electroactive bacterial films.

Carbon electrodes were functionalized through the reduction of diazopyridinium cations that are produced from in situ diazotization of 2-, 3- and 4-aminopyridine. Diazopyridinium salts were much more rarely employed for surface functionalization than other aryldiazonium derivatives. A study combining X-ray Photoelectron Spectroscopy (XPS), contact angle, ellipsometry, Atomic Force Microscopy (AFM) measurements and electrochemical analyses demonstrates that films obtained from 4-diazopyridinium cations are hydrophilic, dense, compact but sufficiently thin to preserve fast electronic transfer rate, being then relevant to efficiently tailor the interface between the anode surface and an electroactive biofilm. Microbial Fuels Cells (MFCs) with pyridine-functionalized graphite anodes exhibit faster development and improved performances than MFCs operating with bare graphite anodes.

Dual-Responsive Molecular Switches Based on Dithienylethene-RuII Organometallics in Self-Assembled Monolayers Operating at Low Voltage.

Two carbon-rich ruthenium complexes bearing a dithienylethene (DTE) unit and a hexylthiol spacer were designed to be attached on gold surfaces. Both compounds display photochemically driven switching properties, allowing reversible conversion from open to closed forms of the DTE units upon irradiation in solution. In contrast, only the bimetallic complex undergoes an efficient electrochemical ring closure at low potential, (0.5 V vs. SCE), whereas the monometallic complex shows a simple one-electron reversible redox event. These appealing switching properties could be successfully transferred within diluted self-assembled monolayers (SAMs). Furthermore, the two immobilized organometallics exhibit fast electron-transfer kinetics. Therefore, this organometallic strategy allows us to obtain multifunctional surfaces with the possibility of combining switching events triggered by an electrochemical oxidation at low potential and by light at distinct wavelengths for a write-and-erase function, along with an access to different oxidation states. Importantly, a non-destructive electrochemical read-out is achieved at a sufficiently high scan rate that prevents any electrochemical closing. On the whole, the two surface-confined organometallic compounds exhibit appealing properties for application in molecular electronics.

Immobilization of Monolayers Incorporating Cu Funnel Complexes onto Gold Electrodes. Application to the Selective Electrochemical Recognition of Primary Alkylamines in Water.

The immobilization of a copper calix[6]azacryptand funnel complex on gold-modified electrodes is reported. Two different methodologies are described. One is based on alkyne-terminated thiol self-assembled monolayers. The other relies on the electrografting of a calix[4]arene platform bearing diazonium functionalities at its large rim and carboxylic functions at its small rim, which is post-functionalized with alkyne moieties. In both cases, the CuAAC electroclick methodology proved to be the method of choice for grafting the calix[6]azacryptand onto the monolayers. The surface-immobilized complex was fully characterized by surface spectroscopies and electrochemistry in organic and aqueous solvents. The Cu complex displays a well-defined quasi-reversible system in cyclic voltammetry associated with the Cu(II)/Cu(I) redox process. Remarkably, this redox process triggers a powerful selective detection of primary alkylamines in water at a micromolar level, based on a cavitary recognition process.

Extremely robust and post-functionalizable gold nanoparticles coated with calix[4]arenes via metal-carbon bonds.

Gold nanoparticles stabilized with a thin layer of post-functionalizable calix[4]arenes were prepared through the reductive grafting of a calix[4]arene-tetra-diazonium salt. These particles show exceptional stability towards extreme pH, F(-), NaCl, and upon drying. Post-functionalization of the calix-layer was demonstrated, opening the way to a wide range of applications.

Fast Electron Transfer Exchange at Self-Assembled Monolayers of Organometallic Ruthenium(II) σ-Arylacetylide Complexes.

A new series of ruthenium organometallic carbon-rich complexes, exhibiting fast electron transfer kinetics combined to a low oxidation potential, was synthesized for self-assembled monolayer (SAM) formation on gold surfaces. The molecules consist of highly conjugated ruthenium(II) mono(σ-arylacetylide) or bis(σ-arylacetylide) complexes functionalized with different bridge units with specific (protected) anchoring groups that possess high affinity for gold, such as thiol, carbodithioate, and isocyanide. Single component and mixed SAMs were prepared and fully characterized by wettability studies, infrared reflection absorption spectroscopy (IRRAS), X-ray photoelectron spectroscopy (XPS), and electrochemical analyses. By applying the Laviron's formalism, fast electron transfer kinetics (≈10(4) s(-1)) were found at the derived self-assemblies while no significant effect could have been evidenced with variation of the bridging unit and of the anchoring moiety. Interestingly, a hexyl aliphatic spacer in the bridging unit with a thiol group and dilution with suitable nonelectroactive thiols lead to better SAM organization and packing, in comparison with undiluted complexes with shorter spacers. Such features make these compounds suitable alternatives to the widely used ferrocene center as redox-active building blocks for reversible charge storage devices.