RESUMEN
Pharmaceuticals, designed for treating diseases, ironically endanger humans and aquatic ecosystems as pollutants. Adsorption-based wastewater treatment could address this problem, however, creating efficient adsorbents remains a challenge. Recent efforts have shifted towards sustainable bio-based adsorbents. Here, cryogels from lignin-containing cellulose nanofibrils (LCNF) and lignin nanoparticles (LNPs) were explored as pharmaceuticals adsorbents. An enzyme-based approach using laccase was used for crosslinking instead of fossil-based chemical modification. The impact of laccase treatment on LNPs alone produced surface-crosslinked water-insoluble LNPs with preserved morphology and a hemicellulose-rich, water-soluble LNP fraction. The water-insoluble LNPs displayed a significant increase in adsorption capacity, up to 140 % and 400 % for neutral and cationic drugs, respectively. The crosslinked cryogel prepared by one-pot incubation of LNPs, LCNF and laccase showed significantly higher adsorption capacities for various pharmaceuticals in a multi-component system than pure LCNF or unmodified cryogels. The crosslinking minimized the leaching of LNPs in water, signifying enhanced binding between LNPs and LCNF. In real wastewater, the laccase-modified cryogel displayed 8-44 % removal for cationic pharmaceuticals. Overall, laccase treatment facilitated the production of bio-based adsorbents by improving the deposition of LNPs to LCNF. Finally, this work introduces a sustainable approach for engineering adsorbents, while aligning with global sustainability goals.
Asunto(s)
Celulosa , Criogeles , Lacasa , Lignina , Nanopartículas , Contaminantes Químicos del Agua , Adsorción , Criogeles/química , Lignina/química , Lacasa/química , Celulosa/química , Nanopartículas/química , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Preparaciones Farmacéuticas/química , Aguas Residuales/química , Reactivos de Enlaces Cruzados/químicaRESUMEN
Birch wood-derived fiber extracts containing glucuronoxylans (GX) and polyphenols show potential for various food technological applications. This study investigated the effect of two extracts, GXpoly and pureGX, differing in lignin content on colonic barrier function. Healthy rats were fed diets containing 10% GXpoly, pureGX, or cellulose for 4 weeks. Colon crypt depth was lower in the GX groups than in the control group, but in the proximal colon, the result was significant only in GXpoly. An artificial intelligence approach was established to measure the mucus content and goblet cells. In the distal colon, their amounts were higher in the control group than in the GX groups. All diets had a similar effect on the expression of the tight junction proteins occludin, claudin-1, and claudin-7. GXpoly enhanced the fecal IgA production. Our results suggest that GX-rich extracts could support the colonic barrier and work as functional food ingredients in the future.
Asunto(s)
Betula , Colon , Xilanos , Ratas , Animales , Colon/metabolismo , Mucosa Intestinal/metabolismo , Polifenoles/metabolismo , Inteligencia Artificial , Madera , Proliferación CelularRESUMEN
SCOPE: While previously considered inert, recent studies suggest lignin metabolism with unknown metabolic fates is occurring in the gastrointestinal tract of several animal models. This study focuses on analyzing the potential metabolites of lignin. METHODS AND RESULTS: The diets of rats include relatively pure birch glucuronoxylan (pureGX) with residual lignin or lignin-rich GX (GXpoly) in their diet. Nuclear magnetic spectroscopy of the lignin isolated from the GXpoly-fed rats fecal sample shows high alteration in chemical structure, whereas lignin-carbohydrate complexes (LCCs) are enriched in fecal samples from the pureGX group. Moreover, the increased syringyl-to-guaiacyl (S/G) ratio suggests that lignin G-units are predominantly metabolized based on pyrolysis gas chromatography-mass spectrometry (pyr-GC/MS). The presence of small phenolic metabolites identified in urine samples of the GXpoly group, for example, ferulic and sinapic acids, their sulfate and glucuronide derivatives, and 4-sulfobenzylalcohol, suggests that the small fragmented lignin metabolites in the large intestine enter the plasma, and are further processed in the liver. Finally, the relative abundances of polyphenol-degrading Enterorhabdus and Akkermansia in the gut microbiota are associated with lignin metabolism. CONCLUSION: These findings give further evidence to lignin metabolism in the gut of nonruminants and provide insight to the potential microbes and metabolic routes.
Asunto(s)
Betula , Lignina , Ratas , Animales , Lignina/química , Lignina/metabolismo , Betula/metabolismo , Fibras de la Dieta , XilanosRESUMEN
Correction for 'Gut microbiota can utilize prebiotic birch glucuronoxylan in production of short-chain fatty acids in rats' by Emma Kynkäänniemi et al., Food Funct., 2022, 13, 3746-3759, DOI: 10.1039/D1FO03922A.
RESUMEN
Birch-derived glucuronoxylan (GX)-rich hemicellulose extract is an abundantly available by-product of the forest industry. It has multifunctional food stabilizing properties, and is rich in fiber and polyphenols. Here, we studied its effects on colonic metabolism and gut microbiota in healthy rats. Male and female Wistar rats (n = 42) were fed AIN-93G-based diets with 10% (w/w) of either cellulose (control), a polyphenol and GX-rich extract (GXpoly), or a highly purified GX-rich extract (pureGX) for four weeks. Both the GXpoly and pureGX diets resulted in changes on the gut microbiota, especially in a higher abundance of Bifidobacteriaceae than the cellulose containing diet (p < 0.001). This coincided with higher concentrations of microbial metabolites in the luminal contents of the GX-fed than control rats, such as total short-chain fatty acids (SCFAs) (p < 0.001), acetate (p < 0.001), and N-nitroso compounds (NOCs) (p = 0.001). The difference in the concentration of NOCs was not seen when adjusted with fecal weight. GX supplementation supported the normal growth of the rats. Our results indicate that GXpoly and pureGX can favorably affect colonic metabolism and the gut microbiota. They have high potential to be used as prebiotic stabilizers to support more ecologically sustainable food production.
Asunto(s)
Microbioma Gastrointestinal , Animales , Betula/metabolismo , Ácidos Grasos Volátiles/metabolismo , Femenino , Masculino , Prebióticos , Ratas , Ratas Wistar , XilanosRESUMEN
The production of lignin nanoparticles (LNPs) has emerged as a way to overcome the highly variable and complex molecular structure of lignin. It can offer morphological control of the lignin polymer, allowing the formation of stable LNP dispersions in aqueous media, while increasing the potential of lignin for high-value applications. However, the polydispersity and morphology of LNPs varies depending on the lignin grade and preparation method, and a systematic comparison using different technical lignins is lacking. In this study, it was attempted to find a green fabrication method with a distinct solvent fractionation of lignin to prepare LNPs using three different technical lignins as starting polymers: BLN birch lignin (hardwood, BB), alkali Protobind 1000 (grass, PB), and kraft LignoBoost (softwood, LB). For that, three anti-solvent precipitation approaches to prepare LNPs were systematically compared: 70 % aqueous ethanol, acetone/water (3 : 1) and NaOH as the lignin solvent, and water/aqueous HCl as the anti-solvent. Among all these methods, the acetone/water (3 : 1) approach allowed production of homogeneous and monodisperse LNPs with a negative surface charge and also spherical and smooth surfaces. Overall, the results revealed that the acetone/water (3 : 1) method was the most effective approach tested to obtain homogenous, small, and spherical LNPs from the three technical lignins. These LNPs exhibited an improved stability at different ionic strengths and a wider pH range compared to the other preparation methods, which can greatly increase their application in many fields, such as pharmaceutical and food sciences.
RESUMEN
Lignin is an abundant natural feedstock that offers great potential as a renewable substitute for fossil-based resources. Its polyaromatic structure and unique properties have attracted significant research efforts. The advantages of an enzymatic over chemical or thermal approach to construct or deconstruct lignins are that it operates in mild conditions, requires less energy, and usually uses non-toxic chemicals. Laccase is a widely investigated oxidative enzyme that can catalyze the polymerization and depolymerization of lignin. Its dual nature causes a challenge in controlling the overall direction of lignin-laccase catalysis. In this Review, the factors that affect laccase-catalyzed lignin polymerization were summarized, evaluated, and compared to identify key features that favor lignin polymerization. In addition, a critical assessment of the conditions that enable production of novel lignin hybrids via laccase-catalyzed grafting was presented. To assess the industrial relevance of laccase-assisted lignin valorization, patented applications were surveyed and industrial challenges and opportunities were analyzed. Finally, our perspective in realizing the full potential of laccase in building lignin-based materials for advanced applications was deduced from analysis of the limitations governing laccase-assisted lignin polymerization and grafting.
RESUMEN
The complex chemical structure and the fact that many areas in pulping and lignin chemistry still remain unresolved are challenges associated with exploiting lignin. In this study, we address questions regarding the formation and chemical nature of the insoluble residual lignin, the presence of fatty acids in kraft lignin, and the origin of secoisolariciresinol structures. A mild thermal treatment of lignin at maximum kraft-cooking temperatures (â¼170 °C) with tall oil fatty acids (TOFA) or in an inert solvent (decane) produced highly insoluble products. However, acetylation of these samples enabled detailed chemical characterization by nuclear magnetic resonance (NMR) spectroscopy. The results show that the secoisolariciresinol (ß-ß) structure in kraft lignin is formed by rearrangement of the ß-aryl ether structure. Furthermore, fatty acids bind covalently to kraft lignin by reacting with the stilbene structures present. It is highly probable that these reactions also occur during kraft pulping, and this phenomenon has an impact on controlling the present kraft pulping process along with the development of new products from kraft lignin.
Asunto(s)
Lignanos , Lignina , Butileno Glicoles , Ácidos GrasosRESUMEN
Wood hemicelluloses have an excellent capacity to form and stabilize oil-in-water emulsions. Galactoglucomannans (GGM) from spruce and glucuronoxylans (GX) from birch provide multifunctional protection against physical breakdown and lipid oxidation in emulsions. Phenolic residues, coextracted with hemicelluloses using the pressurized hot water (PHWE) process, seem to further enhance emulsion stability. According to hypothesis, phenolic residues associated with hemicelluloses deliver and anchor hemicelluloses at the emulsion interface. This study is the first to characterize the structure of the phenolic residues in both GGM- and GX-rich wood extracts and their role in the stabilization of emulsions. PHWE GGM and GX were fractionated by centrifugation to obtain concentrated phenolic residues as one fraction (GGM-phe and GX-phe) and partially purified hemicelluloses as the other fraction (GGM-pur and GX-pur). To evaluate the role of each fraction in terms of physical and oxidative stabilization, rapeseed oil-in-water emulsions were prepared using GGM, GX, GGM-pur, and GX-pur as stabilizers. Changes in droplet-size distribution and peroxide values were measured during a 3-month accelerated storage test. The results for fresh emulsions indicated that the phenolic-rich fractions in hemicelluloses take part in the formation of emulsions. Furthermore, results from the accelerated storage test indicated that phenolic structures improve the long-term physical stability of emulsions. According to measured peroxide values, all hemicelluloses examined inhibited lipid oxidation in emulsions, GX being the most effective. This indicates that phenolic residues associated with hemicelluloses act as antioxidants in emulsions. According to chemical characterization using complementary methods, the phenolic fractions, GGM-phe and GX-phe, were composed mainly of lignin. Furthermore, the total carbohydrate content of the phenolic fractions was clearly lower compared to the starting hemicelluloses GGM and GX, and the purified fractions GGM-pur and GX-pur. Apparently, the phenolic structures were enriched in the GGM-phe and GX-phe fractions, which was confirmed by NMR spectroscopy as well as by other characterization methods. The frequency of the main bonding pattern in lignins, the ß-O-4 structure, was clearly very high, suggesting that extracted lignin remains in native form. Furthermore, the lignin carbohydrate complex of γ-ester type was found, which could explain the excellent stabilizing properties of PHWE hemicelluloses in emulsions.