Predicting the geographical distribution and niche characteristics of Cotoneaster multiflorus based on future climate change.

Introduction: Arid and semi-arid regions are climate-sensitive areas, which account for about 40% of the world's land surface area. Future environment change will impact the environment of these area, resulting in a sharp expansion of arid and semi-arid regions. Cotoneaster multiflorus is a multi-functional tree species with extreme cold, drought and barren resistance, as well as ornamental and medicinal functions. It was found to be one of the most important tree species for ecological restoration in arid and semi-arid areas. However, bioclimatic factors play an important role in the growth, development and distribution of plants. Therefore, exploring the response pattern and ecological adaptability of C. multiflorus to future climate change is important for the long-term ecological restoration of C. multiflorus in arid and semi-arid areas. Methods: In this study, we predicted the potential distribution of C. multiflorus in China under different climate scenarios based on the MaxEnt 2.0 model, and discussed its adaptability and the major factors affecting its geographical distribution. Results: The major factors that explained the geographical distribution of C. multiflorus were Annual precipitation (Bio12), Min air temperature of the coldest month (Bio6), and Mean air temperature of the coldest quarter (Bio11). However, C. multiflorus could thrive in environments where Annual precipitation (Bio12) >150 mm, Min air temperature of the coldest month (Bio6) > -42.5°C, and Mean air temperature of the coldest quarter (Bio11) > -20°C, showcasing its characteristics of cold and drought tolerance. Under different future climate scenarios, the total suitable area for C. multiflorus ranged from 411.199×104 km² to 470.191×104 km², which was 0.8~6.14 percentage points higher than the current total suitable area. Additionally, it would further shift towards higher latitude. Discussion: The MaxEnt 2.0 model predicted the potential distribution pattern of C. multiflorus in the context of future climate change, and identified its ecological adaptability and the main climatic factors affecting its distribution. This study provides an important theoretical basis for natural vegetation restoration in arid and semi-arid areas.

3D Printing Self-Healing and Self-Adhesive Elastomers for Wearable Electronics in Amphibious Environments.

To meet the demands of challenging usage scenarios, there is an increasing need for flexible electronic skins that can operate properly not only in terrestrial environments but also extend to complex aquatic conditions. In this study, we develop an elastomer by incorporating dynamic urea bonds and hydrogen bonds into the polydimethylsiloxane backbone, which exhibits excellent autonomous self-healing and reversible adhesive performance in both dry and wet environments. A multifunctional flexible sensor with excellent sensing stability, amphibious self-healing capacity, and amphibious self-adhesive performance is fabricated through solvent-free 3D printing. The sensor has a high sensing sensitivity (GF = 45.1) and a low strain response threshold (0.25%) and can be used to detect small human movements and physiological activities, such as muscle movement, joint movement, respiration, and heartbeat. The wireless wearable sensing system assembled by coupling this device with a bluetooth transmission system is suitable for monitoring strenuous human movement in amphibious environments, such as playing basketball, cycling, running (terrestrial environments), and swimming (aquatic environments). The design strategy provides insights into enhancing the self-healing and self-adhesive properties of soft materials and promises a prospective avenue for fabricating flexible electronic skin that can work properly in amphibious environments.

Development of tobacco rattle virus-based platform for dual heterologous gene expression and CRISPR/Cas reagent delivery.

A large number of viral delivery systems have been developed for characterizing functional genes and producing heterologous recombinant proteins in plants, and but most of them are unable to co-express two fusion-free foreign proteins in the whole plant for extended periods of time. In this study, we modified tobacco rattle virus (TRV) as a TRVe dual delivery vector, using the strategy of gene substitution. The reconstructed TRVe had the capability to simultaneously produce two fusion-free foreign proteins at the whole level of Nicotiana benthamiana, and maintained the genetic stability for the insert of double foreign genes. Moreover, TRVe allowed systemic expression of two foreign proteins with the total lengths up to ∼900 aa residues. In addition, Cas12a protein and crRNA were delivered by the TRVe expression system for site-directed editing of genomic DNA in N. benthamiana 16c line constitutively expressing green fluorescent protein (GFP). Taker together, the TRV-based delivery system will be a simple and powerful means to rapidly co-express two non-fused foreign proteins at the whole level and facilitate functional genomics studies in plants.

Infection of Nigrospora nonsegmented RNA Virus 1 Has Important Biological Impacts on a Fungal Host.

Nigrospora nonsegmented RNA virus 1 (NoNRV1) has been reported previously in the fungus Nigrospora oryzae, but its biological effects on its host are unknown. In this work, we isolated a strain 9-1 of N. oryzae from a chrysanthemum leaf and identified NoNRV1 infection in the isolated strain. The genome sequence of NoNRV1 identified here is highly homologous to that of the isolate HN-21 of NoNRV1 previously reported; thus, we tentatively designated the newly identified NoNRV1 as NoNRV1-ZJ. Drug treatment with Ribavirin successfully removed NoNRV1-ZJ from the strain 9-1, which provided us with an ideal control to determine the biological impacts of NoNRV1 infection on host fungi. By comparing the virus-carrying (9-1) and virus-cured (9-1C) strains, our results indicated that infection with NoNRV1 promoted the pigmentation of the host cells, while it had no discernable effects on host growth on potato dextrose agar plates when subjected to osmotic or oxidative stress. Interestingly, we observed inhibitory impacts of virus infection on the thermotolerance of N. oryzae and the pathogenicity of the host fungus in cotton leaves. Collectively, our work provides clear evidence of the biological relevance of NoNRV1 infection in N. oryzae, including pigmentation, hypovirulence, and thermotolerance.

Mussel-inspired self-adhesive hydrogels by conducting free radical polymerization in both aqueous phase and micelle phase and their applications in flexible sensors.

Polydopamine (PDA)-based self-adhesive hydrogel sensors are extensively explored but it is still a challenge to construct PDA-based hydrogels by free radical polymerization. Herein, a new approach to construct self-adhesive hydrogels by conducting free radical polymerization in both aqueous phase and micelle phase is developed. The following two-phase polymerization processes account for the formation of the self-adhesive hydrogels. The first one is the polymerization of acrylamide (AM) and dopamine (DA) in aqueous phase to form adhesive component PAM-PDA (PAM, polyacrylamide; PDA, polydopamine). The second one is the polymerization of hydrophobic monomer 2-methoxyethyl acrylate (MEA) in micelles of an amphiphilic block copolymer Pluronic F127 diacrylate (F127DA). The poly(2-methoxyethyl acrylate) (PMEA) networks help to maintain the high robustness of the hydrogel. Because PMEA and PDA form in relatively separated phases, the inhibition effect of PDA on the free radical polymerization process of PMEA is weakened. Based on this mechanism, mechanically strong and adhesive hydrogels are achieved. The introduced ions during preparation process, such as Na+, OH- and K+, endow the resulting hydrogels ionic conductivity. Resistive strain sensor of the hydrogel achieves a high gauge factor (GF) of 5.26, a response time of 0.25 s and high sensing stability. Because of the adhesiveness, such hydrogel sensor can be applied as wearable sensors in monitoring various human motions. To further address the freezing and drying problems of the hydrogels, organohydrogels are constructed in glycerol-water mixed solvent. The organohydrogels exhibit outstanding anti-freezing property and moisture retention ability, and their adhesiveness is well maintained in subzero conditions. Capacitive pressure sensors of the organohydrogels possessing a GF of 2.05 kPa-1, high sensing stability and reversibility, are demonstrated and explored in monitoring diverse human motions.

Capacitive Pressure Sensors Containing Reliefs on Solution-Processable Hydrogel Electrodes.

Highly sensitive capacitive-type pressure sensor has been achieved by fabricating reliefs on solution-processable hydrogel electrodes. Hybrid PVA/PANI hydrogels (PVA, poly(vinyl alcohol); PANI, polyaniline) with a fully physically cross-linked binary network are selected as the electrodes of the pressure sensors. On the basis of the solution processability, reliefs are fabricated on the surface of PVA/PANI hydrogel electrodes by a template method. The gauge factor (GF) is enhanced by introducing reliefs and regulated by controlling the composition and relief dimension of hydrogel electrodes. The optimized pressure sensor containing reliefs achieves the highest GF of 7.70 kPa-1 and a sensing range of 0-7.4 kPa. Furthermore, the freezing and drying problems of the hydrogel sensors are overcome by introducing a binary solvent of water/glycerol and the pressure sensing ability at -18 °C has been achieved. Finally, monitoring of various pressures in daily life, such as joint bending, blowing, and brush writing, is demonstrated using such pressure sensors.

Highly Stretchable, Fatigue-Resistant, Electrically Conductive, and Temperature-Tolerant Ionogels for High-Performance Flexible Sensors.

Ionogels are ideal candidate materials for flexible sensors, but their stretchability and fatigue resistance are limited. Herein, highly stretchable, fatigue-resistant, electrically conductive, and temperature-tolerant ionogels are investigated and further applied in fabricating high-performance flexible sensors. The ionogels consist of a poly(acrylic acid) (PAA) network and a commonly used room-temperature ionic liquid (RTIL) named 1-ethyl-3-methylimidazolium dicyanamide ([EMIm][DCA]). Dually acrylated Pluronic F127 (F127DA) was utilized to cross-link the PAA network, and [EMIm][DCA] was physically confined in the PAA network. Because of their special cross-linking structure, the PAA ionogels are highly stretchable (>850%), tough, and fatigue-resistant, and they are also conductive, transparent, and temperature-tolerant because of the existence of [EMIm][DCA]. On the basis of their integrated performances, the PAA ionogels were further utilized to fabricate strain sensors and pressure sensors. The ionogel-based strain sensors have high sensitivity, low response time (200 ms), wide strain-sensing range (0-750%), excellent durability (>1400 cycles), and good temperature tolerance and can be applied to detect various human motions. The pressure sensors also have a high response speed (256 ms) and excellent sensitivity (GF = 0.73 kPa-1), which offers an opportunity to detect force generated by finger touching and water droplets.