Ozone-Assisted Cu-Based Catalysts for the Efficient Electro-Reforming Glycerol to Formic Acid.

Glycerol electrooxidation reaction (GOR) to produce value-added chemicals, such as formic acid, could make more efficient use of abundant glycerol and meet future demand for formic acid as a fuel for direct or indirect formic acid fuel cells. Non-noble metal Cu-based catalysts have great potential in electro-reforming glycerol to formic acid. However, the high activity, selectivity and stability of Cu based catalysts in GOR cannot be achieved simultaneously. Here, we used ozone-assisted electrocatalyst to convert glycerol to formic acid under alkaline conditions, the onset potential was reduced by 60 mV, the Faraday efficiency (FE) reached 95%. The catalyst has excellent stability within 300 h at the current density of 10 mA cm-2. The electron spin resonance proved that ozone produced superoxide anion during the GOR. In situ Raman spectroscopy, electrochemical studies showed that glycerol can be activated with ozone in GOR, and the C-C bond can be broken to reduce the polymerization of glycerol on the catalyst surface, so as to produce more formic acid at a lower voltage. Moreover, the removal of dissolved O3 from water can be up to 100% after 30 minutes of GOR reaction at a solubility of 50 mg L-1 as measured by UV-VIS spectrophotometry.

Integrating Ozone Pollutant Elimination in N2 Electrolysis to Produce Nitrate with Reduced Reaction Steps.

The synthesis of nitrate by the electrochemical N2 oxidation reaction (NOR) is currently one of the most promising routes. However, the traditional generation of nitrate depends on the oxidation reaction between N2 and H2O (or ·OH), which involves complex reaction steps and intermediates, showing strong competition from oxygen evolution reaction (OER). Here, an effective NOR method is proposed to directly oxidize N2 by using O3 as a reactive oxygen source to reduce the reaction step. Electrochemical tests demonstrate that the nitrate yield of Pd-Mn3O4/CNT electrocatalyst reaches the milligram level, which is the highest yield reported so far for electrocatalytic NOR. Quantitative characterization is employed to establish a comprehensive set of benchmarks to confirm the intrinsic nature of nitrogen activation and test the O3-mediated reaction mechanism. Density functional theory (DFT) calculations show that the heterostructure Pd-Mn3O4 leads to a strong adsorption preference for N2 and O3, which greatly reduces the activation energy barrier for N2. This accelerates the synthesis of nitrate based on the direct formation mechanism, which reduces energy barriers and the reaction steps, thus increasing the performance of electrocatalytic nitrate production. The techno-economic analysis underscores the promising feasibility and sustainable economic value of the presented method.

Impacts of ultraviolet absorption by zinc oxide nanoparticle modifiers on asphalt aging.

Ultraviolet absorption ability of modifiers is essential to protect asphalt from ageing. However, the detailed correlation between them remains unclear. In this study, zinc oxide nanoparticles were used as modifiers, and their ultraviolet absorption ability was manipulated by magnesium and aluminum doping. The influence of ultraviolet absorption ability of the nanoparticles on asphalt ultraviolet ageing was investigated experimentally, and their correlation was revealed in detail by curve fitting. The results show that aluminum doping enhances the ultraviolet absorption ability of nanoparticles, leading to superior anti-aging performance in aluminum-doped zinc oxide modified asphalt compared to pure zinc oxide. Conversely, magnesium doping shows a contrary modification. Evaluating the ultraviolet absorption ability of nanoparticle modifiers by bandgap and absorption intensity, we found that softening point increments, viscosity ageing index, and sulfoxide index exhibit a decreasing trend mainly in the bandgap range of 3.269 to 3.334 eV, whereas carbonyl index shows a decreasing trend mainly in the lower bandgap range of 3.183 to 3.269 eV. This phenomenon is primarily due to the different reactivity of carbon and sulfur with oxygen in asphalt. Curve fitting analysis revealed an exponential correlation between the ageing index of asphalt and the ultraviolet absorption ability of nanoparticles. To achieve superior anti-ultraviolet ageing performance, the nanoparticles should possess an absorption intensity above 0.961 a.u. and a bandgap below 3.299 eV. Moreover, stronger ultraviolet absorption ability of nanoparticles is needed to prevent the formation of carbonyl compounds. The underlying correlation established in the present work has significant implications for selecting suitable modifiers to prevent ultraviolet ageing of asphalt.

Construction of ultrathin solid electrolyte interface on Zn anode within 1 min for high current operating condition.

Organic acid treatment can facilitate the in-situ formation of a solid electrolyte interface (SEI) on Zn foil protecting the anode from corrosion. However, the generation of hydrogen (H2) during this process is inevitable, which is often considered detrimental to getting compact SEI. Herein, a H2 film-assisted method is proposed under concentrated Amino-Trimethylene-Phosphonic-Acid to construct ultrathin and dense SEI within 1 min. Specifically, the (002) crystal planes survive from the etching process of 1 min due to the adhered H2, inducing uniform deposition and enhanced corrosion-resistance. Moreover, the H2 can effectively regulate the reaction rate, leading to ultrathin SEI and initiating a morphology preservation behavior, which has been neglected by the previous reports. The quick-formed SEI has excellent compatibility, low resistance and effective isolation of electrolyte/anode, whose advantages work together with exposed (002) planes to get accustomed to high-current surge, leading to the ZAC1@Zn//ZAC1@Zn consistently cycling over 800 h at 15 mA cm-2 and 15 mAh cm-2, the ZAC1@Zn//Cu preserves high reversibility (CE 99.7 %), and the ZAC1@Zn//MVO exhibits notable capacity retention at 191.7 mAh/g after 1000 cycles.

From gut to liver: unveiling the differences of intestinal microbiota in NAFL and NASH patients.

Non-alcoholic fatty liver disease (NAFLD) is increasingly recognized for its global prevalence and potential progression to more severe liver diseases such as non-alcoholic steatohepatitis (NASH). The gut microbiota plays a pivotal role in the pathogenesis of NAFLD, yet the detailed characteristics and ecological alterations of gut microbial communities during the progression from non-alcoholic fatty liver (NAFL) to NASH remain poorly understood. Methods: In this study, we conducted a comparative analysis of gut microbiota composition in individuals with NAFL and NASH to elucidate differences and characteristics. We utilized 16S rRNA sequencing to compare the intestinal gut microbiota among a healthy control group (65 cases), NAFL group (64 cases), and NASH group (53 cases). Random forest machine learning and database validation methods were employed to analyze the data. Results: Our findings indicate a significant decrease in the diversity of intestinal flora during the progression of NAFLD (p < 0.05). At the phylum level, high abundances of Bacteroidetes and Fusobacteria were observed in both NAFL and NASH patients, whereas Firmicutes were less abundant. At the genus level, a significant decrease in Prevotella expression was seen in the NAFL group (AUC 0.738), whereas an increase in the combination of Megamonas and Fusobacterium was noted in the NASH group (AUC 0.769). Furthermore, KEGG pathway analysis highlighted significant disturbances in various types of glucose metabolism pathways in the NASH group compared to the NAFL group, as well as notably compromised flavonoid and flavonol biosynthesis functions. The study uncovers distinct microbiota characteristics and microecological changes within the gut during the transition from NAFL to NASH, providing insights that could facilitate the discovery of novel biomarkers and therapeutic targets for NAFLD.

Effect of destability time on microstructure and properties of hypoeutectic high chromium cast iron.

The present work investigated the effect of destabilization time on the mechanical properties and microstructure evolution of high chromium cast iron, and scanning electron microscopy and electron probe microanalysis techniques were employed. The results show that the hardness of hypoeutectic high chromium cast iron is related to the size and volume fraction of secondary carbides precipitated from the matrix. The hardness of the alloy continues to rise due to the continuous increase of the volume fraction of the secondary carbide at the initial stage of destabilization. The alloy reaches its peak hardness value at 950 °C and 1000 °C for 1 hour holding time. The solid solubility of carbon and alloying elements in the matrix increases as the holding time extends, resulting in a large number of carbides redissolved into the matrix, making the hardness of the alloy decrease; the hardness of the alloy at 14 h is less than that at 10 min. Under 1050 °C, the size and density of the secondary carbide increase significantly; extending the holding time will lead to the continuous reduction of the carbide rod that provides strength, thus, the hardness curve shows a downward trend.

Activation of Ga Liquid Catalyst with Continuously Exposed Active Sites for Electrocatalytic C-N Coupling.

Environmentally friendly electrocatalytic coupling of CO2 and N2 for urea synthesis is a promising strategy. However, it is still facing problems such as low yield as well as low stability. Here, a new carbon-coated liquid alloy catalyst, Ga79Cu11Mo10@C is designed for efficient electrochemical urea synthesis by activating Ga active sites. During the N2 and CO2 co-reduction process, the yield of urea reaches 28.25 mmol h-1 g-1, which is the highest yield reported so far under the same conditions, the Faraday efficiency (FE) is also as high as 60.6 % at -0.4 V vs. RHE. In addition, the catalyst shows excellent stability under 100 h of testing. Comprehensive analyses showed that sequential exposure of a high density of active sites promoted the adsorption and activation of N2 and CO2 for efficient coupling reactions. This coupling reaction occurs through a thermodynamic spontaneous reaction between *N=N* and CO to form a C-N bond. The deformability of the liquid state facilitates catalyst recovery and enhances stability and resistance to poisoning. Moreover, the introduction of Cu and Mo stimulates the Ga active sites, which successfully synthesises the *NCON* intermediate. The reaction energy barrier of the third proton-coupled electron transfer process rate-determining step (RDS) *NHCONH→*NHCONH2 was lowered, ensuring the efficient synthesis of urea.

Monometallic Ultrasmall Nanocatalysts via Different Valence Atomic Interfaces Boost Hydrogen Evolution Catalysis.

Synergistic monometallic nanocatalysts have attracted much attention due to their high intrinsic activity properties. However, current synergistic monometallic nanocatalysts tend to suffer from long reaction paths due to restricted nanoscale interfaces. In this paper, we synthesized the interstitial compound N-Pt/CNT with monometallic atomic interfaces. The catalysts are enriched with atomic interfaces between higher valence Ptδ+ and Pt0, allowing the reaction to proceed synergistically within the same component with an ideal reaction pathway. Through ratio optimization, N2.42-Pt/CNT with a suitable ratio of Ptδ+ and Pt0 is synthesized. And the calculated turnover frequency of N2.42-Pt/CNT is about 37.4 s-1 (-0.1 V vs reversible hydrogen electrode (RHE)), six times higher than that of the commercial Pt/C (6.58 s-1), which is the most intrinsically active of the Pt-based catalysts. Moreover, prepared N2.42-Pt/CNT exhibits excellent stability during the chronoamperometry tests of 200 h. With insights from comprehensive experiments and theoretical calculations, Pt with different valence states in monometallic atomic interfaces synergistically accelerates the H2O dissociation step and optimizes the Gibbs free energy of H* adsorption. And the existence of desirable hydrogen transfer paths substantially facilitates hydrogen evolution reaction kinetics.

In Situ, Rapid Synthesis of Carbon-Loaded High Density and Ultrasmall High Entropy Oxide Nanoparticles as Efficient Electrocatalysts.

High entropy materials offer almost unlimited catalytic possibilities due to their variable composition, unique structure, and excellent electrocatalytic performance. However, due to the strong tendency of nanoparticles to coarsen and agglomerate, it is still a challenge to synthesize nanoparticles using simple methods to precisely control the morphology and size of the nanoparticles in large quantities, and their large-scale application is limited by high costs and low yields. Herein, a series of high-entropy oxides (HEOs) nanoparticles with high-density and ultrasmall size (<5 nm) loaded on carbon nanosheets with large quantities are prepared by Joule-heating treatment of gel precursors in a short period of time (≈60 s). Among them, the prepared (FeCoNiRuMn)3O4-x catalyst shows the best electrocatalytic activity for oxygen evolution reaction, with low overpotentials (230 mV @10 mA cm-2, 270 mV @100 mA cm-2), small Tafel slope (39.4 mV dec-1), and excellent stability without significant decay at 100 mA cm-2 after 100 h. The excellent performance of (FeCoNiRuMn)3O4-x can be attributed to the synergistic effect of multiple elements and the inherent structural stability of high entropy systems. This study provides a more comprehensive design idea for the preparation of efficient and stable high entropy catalysts.

The Superaerophobic N-Doped Carbon Nanocage with Hydrogen Spillover Effort for Enhanced Hydrogen Evolution.

Under the high current density, the excessive strong adsorption of H* intermediates and H2 accumulation the catalysts are the major obstacle to the industrial application of hydrogen evolation reaction (HER) catalysts. Herein, through experimental exploration, it is found that the superaerophobic Nitrogen (N)-doped carbon material can promote the rapid release of H2 and provide H* desorption site for the hydrogen spillover process, which makes it have great potential as the catalysts support for hydrogen spillover. Based on this discovery, this work develops the hydrogen spillover catalyst with electron-rich Pt sites loaded on N-doped carbon nanocage (N-CNC) with adjustable work function. Through a series of comprehensive electrochemical tests, the existence of hydrogen spillover effort has been proved. Moreover, the in situ tests showed that pyrrolic-N can activate adjacent carbon sites as the desorption sites for hydrogen spillover. The Pt@N-1-CNC with the minimum work function difference (ΔΦ) between Pt NPs and support shows superior hydrogen evolution performance, only needs overpotential of 12.2 mV to reach current density of 10 mA cm-2 , outstanding turnover frequency (TOF) (44.7 s-1 @100 mV) and superior durability under the 360 h durability tests at current density of 50 mA cm-2 .

Electronic and Geometric Effects Endow PtRh Jagged Nanowires with Superior Ethanol Oxidation Catalysis.

Complete ethanol oxidation reaction (EOR) in C1 pathway with 12 transferred electrons is highly desirable yet challenging in direct ethanol fuel cells. Herein, PtRh jagged nanowires synthesized via a simple wet-chemical approach exhibit exceptional EOR mass activity of 1.63 A mgPt-1 and specific activity of 4.07 mA cm-2 , 3.62-fold and 4.28-folds increments relative to Pt/C, respectively. High proportions of 69.33% and 73.42% of initial activity are also retained after chronoamperometric test (80 000 s) and 1500 consecutive potential cycles, respectively. More importantly, it is found that PtRh jagged nanowires possess superb anti-CO poisoning capability. Combining X-ray absorption spectroscopy, X-ray photoelectron spectroscopy as well as density functional theory calculations unveil that the remarkable catalytic activity and CO tolerance stem from both the Rh-induced electronic effect and geometric effect (manifested by shortened Pt─Pt bond length and shrinkage of lattice constants), which facilitates EOR catalysis in C1 pathway and improves reaction kinetics by reducing energy barriers of rate-determining steps (such as *CO → *COOH). The C1 pathway efficiency of PtRh jagged nanowires is further verified by the high intensity of CO2 relative to CH3 COOH/CH3 CHO in infrared reflection absorption spectroscopy.

Diluting the Resistance of Built-in Electric Fields in Oxygen Vacancy-enriched Ru/NiMoO4-x for Enhanced Hydrogen Spillover in Alkaline Seawater Splitting.

Recently, hydrogen spillover based binary (HSBB) catalysts have received widespread attention due to the sufficiently utilized reaction sites. However, the specific regulation mechanism of spillover intensity is still unclear. Herein, we have fabricated oxygen vacancies enriched Ru/NiMoO4-x to investigate the internal relationship between electron supply and mechanism of hydrogen spillover enhancement. The DFT calculations cooperate with in situ Raman spectrum to uncover that the H* spillover from NiMoO4-x to Ru. Meanwhile, oxygen vacancies weakened the electron supply from Ru to NiMoO4-x , which contributes to dilute the resistance of built-in electric field (BEF) for hydrogen spillover. In addition, the higher ion concentration in electrolyte will promote the H* adsorption step obviously, which is demonstrated by in situ EIS tests. As a result, the Ru/NiMoO4-x exhibits a low overpotential of 206 mV at 3.0 A cm-2 , a small Tafel slope of 28.8 mV dec-1 , and an excellent durability of 550 h at the current density of 0.5 A cm-2 for HER in 1.0 M KOH seawater.

Frank Partial Dislocations in Coplanar Ir/C Ultrathin Nanosheets Boost Hydrogen Evolution Reaction.

Developing highly active and stable acidic hydrogen evolution catalysts is of great significance and challenge for the long-term operation of commercial proton exchange membrane (PEM) electrolyzers. In this work, coplanar ultrathin nanosheets composed of rich-Frank partial dislocations (FPDs) are first synthesized. Ir nanoparticles and carbon (Dr-Ir/C NSs) use a nonequilibrium high-temperature thermal shock method (>1200 °C) and KBr template-assisted techniques. Dr-Ir/C NSs exhibit excellent hydrogen evolution reaction (HER) performance with a remarkably high mass activity of 6.64 A mg-1 at 50 mV, which is among the best Ir-based catalysts.In addition, Dr-Ir/C NSs are able to operate stably at 1.0 A cm-2 for 200 h as a cathode in a PEM electrolyser, and the original coplanar ultrathin nanosheets structure are maintained after the test, demonstrating excellent stability against stacking and agglomeration. Geometrical phase analysis and theoretical calculations show that the FPDs produce a 4% compressive strain in the Dr-Ir/C NSs, and the compressive strain weaken the adsorption of H* by Ir, thus increasing the intrinsic activity of the catalyst.

Precise Interstitial Built-In Electric Field Tuning for Hydrogen Evolution Electrocatalysis.

The built-in electric field (BEF) has become an effective means of adjusting the electronic structure and hydrogen spillover to influence the adsorption of intermediates. However, the previously reported BEF cannot be tuned continuously and precisely. Herein, a series of nanocatalysts with interstitial BEF were successfully synthesized, and the effect of precisely tuned interstitial BEF on the intermediate's adsorption and hydrogen spillover was systematically investigated using changing the insertion of interstitial B. Three catalysts with different BEF strengths were obtained by changing the interstitial content (B0.22-Cu/NC, B0.30-Cu/NC, B0.41-Cu/NC), and it was demonstrated that B0.30-Cu/NC gave the best catalytic performance for hydrogen evolution reactions (HERs). The turnover frequency (TOF) value is shown to reach 0.36 s-1 at just -0.1 V vs. RHE, which is about 3 times that of Cu (0.12 s-1). For the HER, it is one of the best Cu-based catalysts reported to date (Table S3). Besides, when the catalyst was applied to the cathode of the PEM water electrolyzer, B0.30-Cu/NC exhibited long-time stability at a water-splitting current density of 500 mA cm-2. Density functional theory and in situ Raman spectroscopy suggest that a suitable interstitial BEF can not only optimize the intermediate's adsorption but also promote hydrogen spillover.

Chelating Co-reduction Strategy for the Synthesis of High-Entropy Alloy Aerogels.

Aerogels, as three-dimensional porous materials, have attracted much attention in almost every field owing to their unique structural properties. Designing high-entropy alloy aerogels (HEAAs) to quinary and above remains an enormous challenge due to the different reduction potentials and nucleation/growth kinetics of different constituent metals. Herein, a novel and universal chelating co-reduction strategy to prepare HEAAs at room temperature in the water phase is proposed. The addition of chelators (ethylenediaminetetraacetic acid tetrasodium salt, sodium citrate, salicylic acid, and 4,4'-bipyridine) with a certain strong coordination capacity can adjust the reduction potential of different metal components, which is the key to synthesize single-phase solid solution alloys successfully. The optimized AgRuPdAuPt HEAA can be an excellent electrocatalyst for hydrogen evolution reaction (HER) with an ultrasmall overpotential of 22 mV at 10 mA cm-2 and excellent stability for 24 h in an alkaline solution. In situ Raman spectroscopy unveils the enhanced hydrogen evolution reaction mechanism of HEAAs. Overall, this work provides a novel chelating co-reduction strategy for the facile and versatile synthesis and design of advanced HEAAs and broadens the development and utilization of multi-elemental alloy electrocatalysts.

·H effectively enhance electrocatalytic nitrogen fixation.

Nowadays, most reported ammonia (NH3) yields and Faradaic efficiency (FE) of electrocatalysts are very low in the field of electrocatalytic nitrogen reduction reactions (NRR). Here, we are reported ·H for the first time in the field of electrocatalytic NRR, which are generated by sulfite (SO32-) and H2O in electrolyte solutions upon exposure to UV light. The high NH3 yields can achieve 100.7 µg h-1 mgcat-1, while stability can achieve 64 h and the FE can achieve 27.1% at -0.3 V (vs. RHE) with UV irradiation. In situ Fourier transform infrared spectroscopy (FTIR), electron spin resonance (ESR), density functional theory (DFT) and 1H nuclear magnetic resonance (NMR) tests showed that the ∙H effectively lowered the reaction energy barrier at each step of the NRR process and inhibits the occurrence of competitive hydrogen evolution reaction (HER). This explores the path and provides ideas for the field of electrocatalysis involving water.

Free radicals promote electrocatalytic nitrogen oxidation.

In this work, we introduce hydroxyl radicals into the electrocatalytic nitrogen oxidation reaction (NOR) for the first time. Cobalt tetroxide (Co3O4) acts not only as an electrocatalyst, but also as a nanozyme (in combination with hydrogen peroxide producing ˙OH), and can be used as a high-efficiency nitrogen oxidation reaction (NOR) electrocatalyst for environmental nitrate synthesis. Co3O4 + ˙OH shows an excellent nitrogen oxidation reaction (NOR) performance among Co3O4 catalysts in 0.1 M Na2SO4 solution. At an applied potential of 1.7 V vs. RHE, the HNO3 yield of Co3O4 + ˙OH reaches 89.35 µg h-1 mgcat -1, which is up to 7 times higher than that of Co3O4 (12.8 µg h-1 mgcat -1) and the corresponding FE is 20.4%. The TOF of Co3O4 + ˙OH at 1.7 V vs. RHE reaches 0.58 h-1, which is higher than that of Co3O4 (0.083 h-1), demonstrating that free radicals greatly enhance the intrinsic activity. Density functional theory (DFT) demonstrates that ˙OH not only can drive nitrogen adsorption, but also can decrease the energy barrier (rate-determining step) of N2 to N2OH*, thus producing great NOR activity.

Universal Synthesized Strategy for Amorphous Pd-Based Nanosheets Boosting Ambient Ammonia Electrosynthesis.

The electrocatalytic nitrogen reduction reaction (NRR) is emerging as a great promise for ambient and sustainable NH3 production while it still suffers from the high adsorption energy of N2 , the difficulty of *NN protonation, and inevitable hydrogen evolution, leading to a great challenge for efficient NRR. Herein, we synthesized a series of amorphous trimetal Pd-based (PdCoM (M = Cu, Ag, Fe, Mo)) nanosheets (NSs) with an ultrathin 2D structure, which shows high efficiency and robust electrocatalytic nitrogen fixation. Among them, amorphous PdCoCu NSs exhibit excellent NRR activity at low overpotentials with an NH3 yield of 60.68 µg h-1 mgcat -1 and a corresponding Faraday efficiency of 42.93% at -0.05 V versus reversible hydrogen electrode as well as outstanding stability with only 5% decrease after a long test period of 40 h at room temperature. The superior NRR activity and robust stability should be attributed to the large specific surface area, abundant active sites as well as structural engineering and electronic effect that boosts up the Pd 4d band center, which further efficiently restrains the hydrogen evolution. This work offers an opportunity for more energy conversion devices through the novel strategy for designing active and stable catalysts.

PtIrM (M = Ni, Co) jagged nanowires for efficient methanol oxidation electrocatalysis.

It remains a huge challenge to develop methanol oxidation electrocatalysts with remarkable catalytic activity and anti-CO poisoning capability. Herein, PtIrNi and PtIrCo jagged nanowires are successfully synthesized via a facile wet-chemical approach. Pt and Ir components are concentrated in the exterior and Ni is concentrated in the interior of PtIrNi jagged nanowires, while PtIrCo jagged nanowires feature the homogeneous distribution of constituent metals. The PtIrNi and PtIrCo jagged nanowires exhibit mass activities of 1.88 A/mgPt and 1.85 A/mgPt, respectively, 3.24 and 3.19 times higher than that of commercial Pt/C (0.58 A/mgPt). In-situ Fourier transform infrared spectroscopy indicates that CO2 was formed at a very low potential for both nanowires, in line with the high ratio of forward current density to backward current density for PtIrNi jagged nanowires (1.30) and PtIrCo jagged nanowires (1.46) relative to Pt/C (0.76). Also, the CO stripping and X-ray photoelectron spectroscopy results substantiate the remarkable CO tolerance of the jagged nanowires. Besides, the two jagged nanowires possess exceptional activities toward ethanol and ethylene glycol oxidation reactions. This work provides a novel line of thought in terms of rational design of alcohol oxidation electrocatalysts with distinctive nanostructures.

Systematic Engineering on Ni-Based Nanocatalysts Effectively Promote Hydrogen Evolution Reaction.

Designing a synthesis of ultra-small Ni-based nanomaterials with high intrinsic activity and stability in alkaline hydrogen evolution reaction (HER) is a major challenge. Herein, a series of noble metal doped ultra-small size (4 nm) M-Ni/NiO nanoparticles supported on CNT are rationally designed by a solvent-free microwave reduction method that is fast (60 s), simple, includes no surfactants, extensive (>1 g), and has high yield (82.7%). The Ir-Ni/NiO@CNT has superior performance with a low overpotential of 24.6 mV at 10 mA cm-2 . In addition, the turnover frequency (TOF) value up to 2.51 s-1 and the exchange current density reaches 4.34 mA cm-2 , indicating that the catalyst has better intrinsic catalytic activity. It is further proved by density functional theory (DFT) that the NiO surface is conducive to the adsorption of OH* in the Volmer step while the Ni is inclined to adsorb H*, which synergistically promotes the water-splitting reaction, thereby increasing the catalytic rate of HER. It is believed that this work will provide valuable contributions and inspirations toward the large-scale production of high-performance Ni-based electrocatalysts for HER.