A novel technology for preparing the placebos of vortioxetine hydrobromide tablets using LCD 3D printing.

This study aimed to describe the use of liquid crystal display (LCD) three-dimensional (3D) printing technology to prepare moulds for vortioxetine hydrobromide (VOR) tablet placebos and provide an economical, convenient, and flexible method for the small-batch preparation of special-shaped, scored, and coated placebo tablets. First, LCD 3D printing was used to generate different placebo moulds of VOR tablets based on VOR tablet digital models subtracted from the digital models of cuboid moulds by Boolean operation to optimise the structures of moulds. The better placebo mould had a parting surface located at the 7/10 height of the packing cavities and the positioning columns and slots were three pairs, and the efflux space had slender efflux channels combined with wide efflux tanks. Next, the placebo mould was corrected by the dimensional compensation method due to the shrinkage rates of the packing cavities (2.42%) and placebo prescription (1.12%) and the thickness of the film coating (25.08 µm). The placebo prescription was 8% hydroxypropyl methylcellulose (SH K15M) hydroalcoholic gel, and its mass ratio to lactose was 0.8:2. The placebos were coated with 13% gastric-soluble film coating solution for 30 min and polished with the 30% PEG 4000 solution. The National Bureau of Standards value between the VOR tablets and their placebos was 1.22 ± 0.10 (less than1.5). Finally, the mass of the placebos was similar to that of the VOR tablets. Their dimensional differences were less than 0.1 mm. Their mass, colour, odour, shape, and texture were all similar, which were assessed by manual evaluation. In conclusion, the preparations of VOR tablet placebos can be applied in placebo-controlled trials, and LCD 3D printing has an extensive application value in preparing placebo tablets.

A Novel Preparation Method for Effervescent Tablets of Xianganfang Containing Fresh Juice using a Semi-Solid Extrusion 3D Printer with Three Cartridge Holders.

This study aimed to prepare effervescent tablets of traditional Chinese medicine Xianganfang with fresh juice using a semi-solid 3D printer with three cartridge holders to seperate acid and alkali source by drug paste through model design to avoid sticking impact and premature effervescence during the tableting in the conventional preparation process. The powder of Xianganfang including fresh juice of Phyllanthus emblica and licorice extract was obtained by vacuum freeze-drying with 50% mannitol as cryoprotectant. Then, the formulation of 3D-printed effervescent tablets was investigated. Further 5% HPMC hydroalcoholic gel was mixed with sodium bicarbonate and freeze-dried Xianganfang powder to prepare alkali source and drug paste respectively while 30% PVP ethanol solution was mixed with tartaric acid to prepare acid source paste; these three pastes had good printability. The pastes of drug, acid, and alkali were loaded into three syringe cartridges separately and numbered as "3," "5," and "7," according to cartridge holders of the 3D printer, and printed in the order of "537,353,735" for separating acid and alkali by drug to avoid premature effervescence. And the basic printing parameters were optimized. The tablets were evaluated by the appearance, tablet weight variation, hardness, disintegration time, friability, pH, and stability. The physicochemical properties all conformed to the Chinese Pharmacopoeia 2020 edition. The content of the active ingredient gallic acid was 0.769 ± 0.019 mg/g. This study provided a new method to prepare effervescent tablets of traditional Chinese medicine with fresh juice using 3D printing technology.

External validation of vancomycin population pharmacokinetic models in ten cohorts of infected Chinese patients.

OBJECTIVES: Appropriate dosage of vancomycin is critical for safety and efficacy in treating infectious diseases. Various population pharmacokinetic (PPK) models have been established. To lay a foundation for the clinical application, it is important to perform external validation of the published model. The aim of this study was to find the most suitable vancomycin PPK model for treatment of infection in China amongst all studied models developed for adults. METHODS: A systematic literature search of published population vancomycin pharmacokinetic analyses was performed using the PubMed database. The identified models were evaluated in ten independent cohorts from China. Nonlinear mixed-effects modeling (NONMEM) was used for data analysis. The median prediction error (MPE), the distribution of prediction error (PE), and normalized prediction distribution errors (NPDE) were calculated and described. Predictive performance was evaluated by bias and accuracy. RESULTS: A total of 449 vancomycin concentrations from 397 infected participants were used for external validation. The MPE of the three models from the Chinese population was less than 10%. Half of the models had an acceptable MPE. For patients with different site infections and different renal functions, each model differed in its predictive ability to some extent. The NPDE results showed that all models had an obvious bias. CONCLUSIONS: None of the models had good performance in both prediction- and simulation-based diagnostics. Carrying out sufficient external validation of the PPK model before clinical application is of utmost importance. In clinical practice, the model's population closest to the application population should be used.

A nomogram incorporating functional and tubular damage biomarkers to predict the risk of acute kidney injury for septic patients.

BACKGROUND: Combining tubular damage and functional biomarkers may improve prediction precision of acute kidney injury (AKI). Serum cystatin C (sCysC) represents functional damage of kidney, while urinary N-acetyl-ß-D-glucosaminidase (uNAG) is considered as a tubular damage biomarker. So far, there is no nomogram containing this combination to predict AKI in septic cohort. We aimed to compare the performance of AKI prediction models with or without incorporating these two biomarkers and develop an effective nomogram for septic patients in intensive care unit (ICU). METHODS: This was a prospective study conducted in the mixed medical-surgical ICU of a tertiary care hospital. Adults with sepsis were enrolled. The patients were divided into development and validation cohorts in chronological order of ICU admission. A logistic regression model for AKI prediction was first constructed in the development cohort. The contribution of the biomarkers (sCysC, uNAG) to this model for AKI prediction was assessed with the area under the receiver operator characteristic curve (AUC), continuous net reclassification index (cNRI), and incremental discrimination improvement (IDI). Then nomogram was established based on the model with the best performance. This nomogram was validated in the validation cohort in terms of discrimination and calibration. The decision curve analysis (DCA) was performed to evaluate the nomogram's clinical utility. RESULTS: Of 358 enrolled patients, 232 were in the development cohort (69 AKI), while 126 in the validation cohort (52 AKI). The first clinical model included the APACHE II score, serum creatinine, and vasopressor used at ICU admission. Adding sCysC and uNAG to this model improved the AUC to 0.831. Furthermore, incorporating them significantly improved risk reclassification over the predictive model alone, with cNRI (0.575) and IDI (0.085). A nomogram was then established based on the new model including sCysC and uNAG. Application of this nomogram in the validation cohort yielded fair discrimination with an AUC of 0.784 and good calibration. The DCA revealed good clinical utility of this nomogram. CONCLUSIONS: A nomogram that incorporates functional marker (sCysC) and tubular damage marker (uNAG), together with routine clinical factors may be a useful prognostic tool for individualized prediction of AKI in septic patients.

Cost-effectiveness analyses of sacubitril-valsartan for heart failure.

The objective of this study was to evaluate the pharmacoeconomic value of sacubitril-valsartan for the treatment of heart failure (HF). PubMed, Embase, Cochrane Library, ScienceDirect, Scopus, CNKI, Wanfang, and VIP databases were searched systematically and the retrieval time ended in August 2019. According to the criteria of inclusion and exclusion, the quality of studies included was evaluated as per the Consolidated Health Economic Evaluation Reporting Standards (CHEERS) scale, and the results were extracted and analyzed systematically. The total of 11 cost-effectiveness studies was identified, 10 were performed in the developed countries and 1 in Thailand. All the patients in the studies had chronic heart failure with reduced ejection fraction (HFrEF). Totally, the quality of all the 11 studies was reported to be of an average score of 20.5. Study perspective and time horizons were described in the 11 studies. All included studies discounted the cost or effectiveness. Only 1 study estimated direct and indirect costs; 10 studies evaluated direct cost. The incremental cost-effectiveness ratio (ICER) of sacubitril-valsartan treating HFrEF was $13,150 per quality-adjusted life-years (QALY) in Thailand and $86,735 in Singapore. In European countries, the ICER was from $21,786 to $34,576 per QALY and mean value was $25,410.6 per QALY. In the USA, ICER values ranged from $47,099 to $143,891 per QALY, and mean value was $73,383.5 per QALY; ICER was $30,090 per QALY in Colombia. With the exception of Thailand and Singapore, the ICER of other countries in the included literature was below the implemented country-specific thresholds. Based on existing literatures, with the exception of Thailand and Singapore, sacubitril-valsartan for the treatment of HFrEF is a better cost-effective therapy with ICER basically below the implemented country-specific thresholds. Sacubitril-valsartan was not considered a cost-effective treatment for heart failure with reduced ejection fraction in Thailand and Singapore with the current economic evaluation evidences, but with the willingness-to-pay (WTP) of other counties, sacubitril-valsartan was found to be a cost-effective treatment compared with comparator. Drug cost, time horizon, and hospitalization were the most influential variables across studies. Four studies indicated that with the longer time horizon, the lower ICER value would gain. Further studies are warranted to better evaluate comprehensive utility value of sacubitril-valsartan on heart failure.

Preparation and application of subdivided tablets using 3D printing for precise hospital dispensing.

This study aimed to use three-dimensional printing technology to provide patients with accurate, safe and convenient subdivided drugs and bring the transformation of subdivided drugs' fabrication in the hospital. The formulation, preparation process, model and printing parameters, relationship between dose and preset model for printing of spironolactone of 2 mg, 4 mg and hydrochlorothiazide of 5 mg subdivided tablets prepared by three-dimensional printers were investigated in the study. The three-dimensional printed material consists of commercial tablets powders and other excipients, including lactose, corn starch, microcrystalline cellulose, and so on. Mass variation, drug content and drug content uniformity of subdivided tablets obtained by three-dimensional printing were compared with the pharmacists splitting subdivided tablets. Besides, the results from fourier transform infrared spectroscopy, differential scanning calorimetry and X-ray powder diffraction confirmed that the preparation process of spironolactone of 2 mg, 4 mg and hydrochlorothiazide of 5 mg did not change the crystal structure of the active pharmaceutical ingredient. Furthermore, mass variation, drug content range and drug content uniformity of spironolactone of 2 mg, 4 mg and hydrochlorothiazide of 5 mg tablets split by pharmacists failed to comply with European Pharmacopoeia and Chinese Pharmacopoeia, while those of the three-dimensional printed subdivided tablets did. After the review of the ethics committee as a new technology for hospital dispensing, three-dimensional printed spironolactone subdivided tablets of 2 mg have been used in clinical inpatients and was accepted by pharmacists, nurses and patients. Compared with tablets subdivided split by pharmacists, three-dimensional printed spironolactone tablets of 2 mg were more accurate, safer and more customized, which indicated considerable potential in using three-dimensional printing technology as a new method for hospital dispensing.

ESR1 PvuII (rs2234693 T>C) polymorphism and cancer susceptibility: Evidence from 80 studies.

Emerging epidemiological researches have been performed to assess the association of ESR1 PvuII (rs2234693 T>C) polymorphism with the risk of cancer, yet with conflicting conclusions. Therefore, this updated meta-analysis was performed to make a more accurate evaluation of such relationship. We adopted EMBASE, PubMed, CNKI, and WANFANG database to search relevant literature before January 2018. Odds ratios (ORs) and 95% confidence intervals (CIs) were employed to estimate the relationship strengths. In final, 80 studies (69 publications) involving 26428 cases and 43381 controls were enrolled. Our results failed to provide significant association between overall cancer risk and PvuII polymorphism under homozygous (TT vs. CC) and heterozygous (TT vs. CT) models. Statistically significant relationship was only observed for PvuII polymorphism in allele model T vs. C (OR=0.95, 95% CI=0.91-0.99). Stratification analysis by cancer type suggested that T genotype significantly decreased prostate cancer risk (TT vs. CC: OR=0.79, 95% CI=0.66-0.94; T vs. C: OR=0.89, 95% CI=0.82-0.98), Leiomyoma risk (T vs. C: OR=0.82, 95% CI=0.68-0.98), and HCC risk (TT vs. CC: OR=0.45, 95% CI=0.28-0.71; T vs. C: OR=0.67, 95% CI=0.47-0.95). Furthermore, significantly decreased risk was also found for Africans, population-based and hospital-based studies in the stratified analyses. These results suggest that ESR1 PvuII (rs2234693 T>C) polymorphism may only have little impact on cancer susceptibility. In the future, large-scale epidemical studies are warranted to verify these results.

Calcium Signal Pathway is Involved in Prostaglandin E2 Induced Cardiac Fibrosis in Cardiac Fibroblasts.

Prostaglandin E2 (PGE2), one of the arachidonic acid metabolites synthetized from arachidonic acid through cyclooxygenase (COX) catalysis, demonstrates multiple physiological and pathological actions through different subtypes of EP receptors. PURPOSE: The present study was designed to explore the effects of PGE2 on cardiac fibrosis and the involved mechanism. METHODS: We used western blot analysis, real-time quantitative PCR and immunostaining etc. to testify the mechanism. RESULTS: Our data showed that in cultured adult rat cardiac fibroblasts (CFs), PGE2 effectively promoted the expression of α-smooth muscle actin (α-SMA), connective tissue growth factor (CTGF)，fibronectin (FN), Collagen I and induced [Ca2+]i increase. Besides, calcium increase evoked by PGE2 is mediated by virtue of EP1 activation. Instead of EP3 or EP4, inhibition of EP1 attenuated PGE2-stimulated upregulation of α-SMA，CTGF, FN, collagen I and [Ca2+]i, as well as the nuclear factor of activated T cell cytoplasmic 4 protein (NFATc4) translocation. CONCLUSIONS: PGE2 may promote cardiac fibrosis via EP1 receptor and calcium signal pathway.

Antitumor and apoptotic activities of the chemical constituents from the ethyl acetate extract of Artemisia indica.

Cancer is one of the most eminent diseases of modern times and numerous natural products derived from medicinal plants have been identified as potential sources of antitumor drugs. A successful anticancer drug must target or inhibit tumor cells whilst causing minimal damage to healthy cells. The present study aimed to investigate the antitumor efficacy of ethyl acetate extract, and other isolated compounds from Artemisia indica, on MCF­7, BHY, Miapaca­2, Colo­205 and A­549 cell lines. The apoptotic activity of the compounds was studied using flow cytometry. The different cancer cell lines were treated with the ethyl acetate extract and varying concentrations of compounds (denoted a­g) isolated from the A. indica. The cytotoxicity was evaluated by MTT assay and the apoptotic properties of the compounds and the extract were assessed using flow cytometry. In MCF­7 cells, the effect on mitochondrial membrane potential loss (ΛΨm) induced by compounds b and d was also studied. Bioassay­guided fractionation of the ethyl acetate extract from the shoot and root parts of A. indica led to the identification of the compounds a­g as: 5­hydroxy­3,7,4'­trimethoxyflavone; ludartin; maackiain; lupeol; cis­matricaria ester; trans­matricaria ester; and 6­methoxy­7,8­methylenedioxy coumarin, respectively. All the compounds exhibited mild to potent inhibition of cell proliferation in all the cell lines, with the half maximal inhibitory concentration values ranging from 25.18­88.12 µM. Ludartin and lupeol were observed to have the most potent inhibitory effects. Based on the initially identified antiproliferative effects, these two compounds were evaluated for their effects on cell cycle phase distribution, DNA damage and their effects on mitochondrial membrane potential loss (ΛΨm). The two compounds induced DNA damage and mitochondrial membrane potential loss in MCF­7 cells. The results of the current study suggest that lupeol and ludartin, isolated from A. indica, produce anticancer effects by inducing DNA damage and a reduction of mitochondrial membrane potential, and may be used as potent anticancer agents, subsequent to further study.

Association of PON1 genotype and haplotype with susceptibility to coronary artery disease and clinical outcomes in dual antiplatelet-treated Han Chinese patients.

PURPOSE: The aim of this study was to evaluate the association of PON1 genetic variants with the susceptibility to coronary artery disease (CAD) and with the clinical endpoints in aspirin and clopidogrel (dual antiplatelet therapy)-treated Han Chinese patients with CAD after percutaneous coronary intervention (PCI). METHODS: A total of 538 Han Chinese patients undergoing PCI and receiving dual-antiplatelet therapy were sequentially recruited to the study and followed for up to 1 year. Healthy controls (n = 539) were enrolled during the same period. All study participants were genotyped for five genetic variants in PON1 and the cytochrome P450 2C19*2 mutation (CYP2C19*2). The effect of genetic variants on disease risk and clinical outcome of major adverse cardiac events (MACE) within 1 year or bleeding within 6 months was assessed. RESULTS: CYP2C19*2 was associated with a higher risk of MACE (adjusted P = 0.0098), but a lower risk of bleeding events (adjusted P = 0.0016). The PON1 Q192R polymorphism was significantly associated with a lower risk of bleeding events [odds ratio (OR) 0.61, 95% confidence interval (CI) 0.43-0.87, adjusted P = 0.0066). The haplotype bearing the PON1 -126C allele was associated with a higher risk to CAD (OR 1.48, 95% CI 1.04-2.09, P = 0.029) and a higher risk of bleeding events (OR 1.68, 95% CI 1.10-2.56, P = 0.017) compared to the most frequent haplotype. The transcription activity of haplotype p-162A-126C-108C in the PON1 promoter was 2.6-fold higher than that of the most frequent haplotype (p-162G-126G-108T). CONCLUSIONS: Based on these results, we suggest that the haplotype-bearing PON1 -126C allele contributes to the disease risk and the risk of bleeding events in dual antiplatelet-treated CAD patients after PCI.

[Progress in genetic and epigenetic research on in-stent restenosis after percutaneous coronary interventions].

Coronary heart disease is one of the most important causes of death in human, and consumes vast medical resources. Percutaneous coronary intervention (PCI) has been a significant breakthrough for its treatment. However, clinical application has been hampered by in-stent restenosis (ISR). Although drug eluting stent (DES) has reduced the occurrence of restenosis, incidence of ISR is still about 5% to 10%. The main reasons for restenosis after PCI are hyperplasia of vascular endothelial cells and smooth muscle cell migration. The exact mechanism of personalized differences in restenosis is not clear yet, but there may be a variety of risk factors. In addition to aging, smoking and diabetes, an increasing number of studies have found that genetic and epigenetic factors play an important role in ISR. In this article, authors have reviewed genetic and epigenetic factors on the progression of ISR, which may help to determine the genetic risk factors in patients with ISR after PCI.

The influence of genetic polymorphisms and interacting drugs on initial response to warfarin in Chinese patients with heart valve replacement.

PURPOSE: Compared with genetic factors, drug interactions were largely unexplored in warfarin pharmacogenetic studies. This study sought to systematically investigate the effects of genetic polymorphisms of VKORC1, STX4A, CYP2C9, CYP3A4, and GGCX and interacting drugs on the initial responses to warfarin in Chinese patients with heart valve replacement (HVR). METHODS: A retrospective study was conducted in 809 patients starting warfarin therapy after HVR. The relationships between 12 polymorphisms plus 47 drugs and primary outcomes of the time to the first international normalized ratio (INR) ≥ 1.8 and the time to the first INR > 3.5 and the secondary outcomes of the proportion of time INR < 1.8, the proportion of time INR > 3.5, and the daily warfarin dose in the first 28 days after the initiation of warfarin treatment were analyzed. RESULTS: Genetic polymorphisms and interacting drugs could significantly affect the primary and secondary outcomes. The time to the first INR ≥ 1.8 was significantly influenced by the body surface area (BSA), VKORC1 g.3588G > A allele, and CYP2C9*3 allele, with hazard ratio (HR; 95% confidence interval [CI]) of 0.34 (0.17-0.66), 2.71 (2.2-3.35) and 1.43 (1.07-1.93) respectively. The time to the first INR > 3.5 was affected not only by BSA, VKORC1 g.3588G > A allele, and CYP2C9*3 allele with HR (95%CI) of 0.26 (0.07-0.99), 2.76 (1.61-4.72), and 3.09 (2.02-4.74) respectively, but also by age and interacting drugs, including fluconazole, amiodarone, and simvastatin with HR (95%CI) of 1.02 (1.01-1.04), 2.66 (1.16-6.08), 1.78 (1.17-2.73), and 5.33 (1.67-16.96) respectively. CONCLUSIONS: Not only VKORC1 and CYP2C9 genotypes, but also interacting drugs, had a significant impact on the variability of the initial response to warfarin.

[Kinetic turbidimetric limulus assay of bacterial endotoxin in the replacement solution of on-line hemodiafiltration].

OBJECTIVE: To determine bacterial endotoxin in the replacement solution of on-line hemodiafiltration (on-line HDF) using kinetic turbidimetric limulus test. METHODS AND RESULTS: Validation test was performed with the replacement solution of on-line HDF in which quantified standard endotoxin was added. The recovery rates of endotoxin from the replacement solution and its dilutions at 1/5, 1/10, and 1/20 were 58.17%, 106.7%, 99.00% and 98.79%, respectively, suggesting that the optimal dilution was at 1/10. Standard endotoxin was added into the replacement solution of on-line HDF of 3 batches (040408, 040511,040527), and the recovery rates in their dilution at 1/10 were 76.32%, 99.00% and 96.24%, respectively. The standard endotoxin in the working curve was 1.00, 0.125, and 0.0156 Eu/ml (endotoxin unit/ml), and the dilution at 1/10 of the replacement solution is effective to eliminate the interference in limulus test. CONCLUSION: Kinetic turbidimetric limulus test provide a means to detect endotoxin in the replacement solution of on-line HDF.