EMID2 is a novel biotherapeutic for aggressive cancers identified by in vivo screening.

BACKGROUND: New drugs to tackle the next pathway or mutation fueling cancer are constantly proposed, but 97% of them are doomed to fail in clinical trials, largely because they are identified by cellular or in silico screens that cannot predict their in vivo effect. METHODS: We screened an Adeno-Associated Vector secretome library (> 1000 clones) directly in vivo in a mouse model of cancer and validated the therapeutic effect of the first hit, EMID2, in both orthotopic and genetic models of lung and pancreatic cancer. RESULTS: EMID2 overexpression inhibited both tumor growth and metastatic dissemination, consistent with prolonged survival of patients with high levels of EMID2 expression in the most aggressive human cancers. Mechanistically, EMID2 inhibited TGFß maturation and activation of cancer-associated fibroblasts, resulting in more elastic ECM and reduced levels of YAP in the nuclei of cancer cells. CONCLUSION: This is the first in vivo screening, precisely designed to identify proteins able to interfere with cancer cell invasiveness. EMID2 was selected as the most potent protein, in line with the emerging relevance of the tumor extracellular matrix in controlling cancer cell invasiveness and dissemination, which kills most of cancer patients.

Recovery from Food Waste-Biscuit Doughs Enriched with Pomegranate Peel Powder as a Model of Fortified Aliment.

The aim of the present work is the characterization of biscuit doughs enriched with pomegranate peel powder (PPP) at 3 (PPP3) and 5 (PPP5) wt% in the prospect of developing a fortified aliment as a support of the therapy of chronic inflammatory diseases of the intestinal tract. The total phenolic content of the powder was preliminarily evaluated. Then, the main compounds present in the PPP were identified by HPLC-ESI-TOF-MS analysis, being mainly hydrolysable tannins. The PPP was then treated at 180 °C for 20 min to mimic the baking treatment, and its water-soluble fraction (PPPwsf) was then added in the Caco-2 cell culture as a model of the intestinal epithelial barrier to verify its dose-dependent toxicity, ability in counteracting the oxidative stress, and anti-inflammatory action. Rheological experiments were performed to predict the macroscopic behavior of the PPP-added doughs during lamination and biscuit baking. SEM investigations gave their contribution to the microscopic comprehension of the dough structure. Finally, a consumer panel composed by thirty volunteers was enrolled to express its opinion on the sensory agreeableness of the biscuits prepared with two different concentrations of PPP compared with the reference dough. The discussion is focused on the biological effects of the main components found in the PPP.

Agarose/κ-carrageenan-based hydrogel film enriched with natural plant extracts for the treatment of cutaneous wounds.

Hydrogels for complex and chronic wound dressings must be conformable, absorb and retain wound exudates and maintain hydration. They can incorporate and release bioactive molecules that can accelerate the healing process. Wound dressings have to be in contact with the wound and epidermis, even for long periods, without causing adverse effects. Hydrogel dressing formulations based on biopolymers derived from terrestrial or marine flora can be relatively inexpensive and well tolerated. In the present article hydrogel films composed by agarose (1.0 wt%), κ-carrageenan at three different concentrations (0.5, 1.0 and 1.5 wt%) and glycerol (3.0 wt%) were prepared without recourse to crosslinking agents, and characterized for their mechanical properties, morphology, swelling and erosion behavior. The films resulted highly elastic and able to absorb and retain large amounts of fluids without losing their integrity. One of the films was loaded with the aqueous extract from Cryphaea heteromalla (Hedw.) D. Mohr for its antioxidant properties. Absence of cytotoxicity and ability to reduce the oxidative stress were demonstrated on NIH-3T3 fibroblast cell cultures. These results encourage further biological evaluations to assess their impact on the healing process.

The degree of compactness of the incipient High Methoxyl Pectin networks. A rheological insight at the sol-gel transition.

Fractal analysis can be properly applied to complex structures, like physical and chemical networks formed by particles or polymers, when they exhibit self-similarity over an extended range of length scales and, hence, can be profitably used not only for their morphological characterization but also for individuating possible relationships between morphology and mechanisms of aggregation and crosslinking, as well as between morphology and physical properties. Several experimental methods are available to determine the fractal dimension of gel networks, including various scattering techniques and microscopies, permeability measurements and rheology. The present study regards the self-assembly kinetics of High Methoxyl Pectin (HMP) solutions with different pectin and sucrose concentrations investigated by rheological measurements to highlight the effects of pectin and sucrose concentrations on the gel point and to evaluate the degree of compactness of the incipient gel networks through an interpretation of the viscoelastic response at the sol-gel transition.

Viscoelastic behavior of cardiomyocytes carrying LMNA mutations.

BACKGROUND: Laminopathies are genetic diseases caused by mutations in the nuclear lamina. OBJECTIVE: Given the clinical impact of laminopathies, understanding mechanical properties of cells bearing lamin mutations will lead to advancement in the treatment of heart failure. METHODS: Atomic force microscopy (AFM) was used to analyze the viscoelastic behavior of neonatal rat ventricular myocyte cells expressing three human lamin A/C gene (LMNA) mutations. RESULTS: Cell storage modulus was characterized, by two plateaus, one in the low frequency range, a second one at higher frequencies. The loss modulus instead showed a "bell" shape with a relaxation toward fluid properties at lower frequencies. Mutations shifted the relaxation to higher frequencies, rendering the networks more solid-like. This increase of stiffness with mutations (solid like behavior) was at frequencies around 1 Hz, close to the human heart rate. CONCLUSIONS: These features resulted from a combination of the properties of cytoskeleton filaments and their temporary cross-linker. Our results substantiate that cross-linked filaments contribute, for the most part, to the mechanical strength of the cytoskeleton of the cell studied and the relaxation time is determined by the dissociation dynamics of the cross-linking proteins. The severity of biomechanical defects due to these LMNA mutations correlated with the severity of the clinical phenotype.

Theoretical Importance of PVP-Alginate Hydrogels Structure on Drug Release Kinetics.

BACKGROUND: The new concepts of personalized and precision medicine require the design of more and more refined delivery systems. In this frame, hydrogels can play a very important role as they represent the best surrogate of soft living tissues for what concerns rheological properties. Thus, this paper focusses on a global theoretical approach able to describe how hydrogel polymeric networks can affect the release kinetics of drugs characterized by different sizes. The attention is focused on a case study dealing with an interpenetrated hydrogel made up by alginate and poly(N-vinyl-2-pyrrolidone). METHODS: Information about polymeric network characteristics (mesh size distribution and polymer volume fraction) is deduced from the theoretical interpretation of the rheological and the low field Nuclear Magnetic Resonance (NMR) characterization of hydrogels. This information is then, embodied in the mass balance equation whose resolution provides the release kinetics. RESULTS: Our simulations indicate the influence of network characteristics on release kinetics. In addition, the reliability of the proposed approach is supported by the comparison of the model outcome with experimental release data. CONCLUSIONS: This study underlines the necessity of a global theoretical approach in order to design reliable delivery systems based on hydrogels.

Data concerning the rheological behavior of high methoxyl pectin during gelation process.

The present data concern the structuring kinetics of aqueous high methoxyl pectin (HMP) solutions at acid pH (3.1), constant pectin concentration (0.2% w/w) and sucrose concentrations ranging from 56 to 65% w/w. Consecutive frequency sweep was applied to samples immediately after their preparation. The generalized Maxwell (gM) model was used to describe the change of the mechanical spectra for each different sucrose concentration and to determine the viscoelastic parameters controlling the gelation of the HMP solutions. The viscosities in the sol region are explored in the range 0 to 55% 0 to 40% (w/w) sucrose concentration.

The role of sucrose concentration in self-assembly kinetics of high methoxyl pectin.

Several natural and synthetic polysaccharides are able to form, under appropriate conditions, supramolecular structures, typically physical hydrogels, and, together with their biocompatibility, this explains their wide use in food, pharmaceutical and biomedical sectors. In the case of high methoxyl pectins (HMP) the gel formation is promoted by the presence of cosolutes (sugars or polyols) and low pH. The present investigation mainly regards the structuring kinetics of aqueous HMP solutions at acid pH (3.1) with the same pectin concentration (0.2% w/w) and different sucrose concentrations (from 56 to 65% w/w). Preliminary viscosity tests were performed to individuate the threshold of the sol region. A sequence of consecutive frequency sweeps was applied to each sample immediately after its preparation. The time evolution of the linear viscoelastic behavior is described by the sigmoidal profiles of both moduli at each applied frequency and more thoroughly defined through the change of the mechanical spectrum, i.e. the variation of the parameters of the generalized Maxwell model or the Friedrich-Braun model which are both suitable to provide a satisfactory data fitting. In particular, the equilibrium modulus Ge offers a significant description of the gelation kinetics and its sucrose dependence.

An engineering insight into the relationship of selective cytoskeletal impairment and biomechanics of HeLa cells.

It is widely accepted that the pathological state of cells is characterized by a modification of mechanical properties, affecting cellular shape and viscoelasticity as well as adhesion behaviour and motility. Thus, assessing these parameters could represent an interesting tool to monitor disease development and progression, but also the effects of drug treatments. Since biomechanical properties of cells are strongly related to cytoskeletal architecture, in this work we extensively studied the effects of selective impairments of actin microfilaments and microtubules on HeLa cells through force-deformation curves and stress relaxation tests with atomic force microscopy. Confocal microscopy was also used to display the effects of the used drugs on the cytoskeletal structure. In synergy with the aforementioned methods, stress relaxation data were used to assess the storage and loss moduli, as a complementary way to describe the influence of cytoskeletal components on cellular viscoelasticity. Our results indicate that F-actin and microtubules play a complementary role in the cell stiffness and viscoelasticity, and both are fundamental for the adhesion properties. Our data support also the application of biomechanics as a tool to study diseases and their treatments.

Potential Applications of Nanocellulose-Containing Materials in the Biomedical Field.

Because of its high biocompatibility, bio-degradability, low-cost and easy availability, cellulose finds application in disparate areas of research. Here we focus our attention on the most recent and attractive potential applications of cellulose in the biomedical field. We first describe the chemical/structural composition of cellulose fibers, the cellulose sources/features and cellulose chemical modifications employed to improve its properties. We then move to the description of cellulose potential applications in biomedicine. In this field, cellulose is most considered in recent research in the form of nano-sized particle, i.e., nanofiber cellulose (NFC) or cellulose nanocrystal (CNC). NFC is obtained from cellulose via chemical and mechanical methods. CNC can be obtained from macroscopic or microscopic forms of cellulose following strong acid hydrolysis. NFC and CNC are used for several reasons including the mechanical properties, the extended surface area and the low toxicity. Here we present some potential applications of nano-sized cellulose in the fields of wound healing, bone-cartilage regeneration, dental application and different human diseases including cancer. To witness the close proximity of nano-sized cellulose to the practical biomedical use, examples of recent clinical trials are also reported. Altogether, the described examples strongly support the enormous application potential of nano-sized cellulose in the biomedical field.

Mixed polymeric systems: New ophthalmic viscosurgical device created by mixing commercially available devices.

PURPOSE: To evaluate the rheological properties of mixtures of different commercially available ophthalmic viscosurgical devices (OVDs) containing sodium hyaluronate and chondroitin sulfate. SETTING: Eye Clinic, University of Trieste, Trieste, Italy. DESIGN: Laboratory study. METHODS: Blends were obtained combining a superviscous cohesive OVD (Healon GV [sodium hyaluronate 1%]) and a medium-viscosity dispersive OVD (Viscoat [sodium hyaluronate 3.0%-chondroitin sulfate 4.0%]). The 2 substances were combined in different ratios, and the rheological characteristics were analyzed to find the optimum proportion. A new viscous dispersive OVD, Discovisc (hyaluronic acid 1.6%-chondroitin sulfate 4.0%) was evaluated for comparison. The storage modulus, loss modulus, crossover point, complex viscosity, shear viscosity, and pseudoplasticity were studied. RESULTS: The rheological properties of the mixed solution (1:1 and 3:1) showed intermediate characteristics in comparison with the 2 original substances, characterized by a viscosity comparable to that of the superviscous cohesive OVD, but at a higher shear rate (similar to the medium-viscosity dispersive OVD). The new viscous dispersive OVD performed similarly to the medium-viscosity dispersive OVD at low shear rates but was comparable to the superviscous cohesive OVD at high shear rates. CONCLUSIONS: The mixture of dispersive and cohesive rheological properties in a single OVD might be an advantage during cataract surgery.

Biomimetic Polymers for Cardiac Tissue Engineering.

Heart failure is a morbid disorder characterized by progressive cardiomyocyte (CM) dysfunction and death. Interest in cell-based therapies is growing, but sustainability of injected CMs remains a challenge. To mitigate this, we developed an injectable biomimetic Reverse Thermal Gel (RTG) specifically engineered to support long-term CM survival. This RTG biopolymer provided a solution-based delivery vehicle of CMs, which transitioned to a gel-based matrix shortly after reaching body temperature. In this study we tested the suitability of this biopolymer to sustain CM viability. The RTG was biomolecule-functionalized with poly-l-lysine or laminin. Neonatal rat ventricular myocytes (NRVM) and adult rat ventricular myocytes (ARVM) were cultured in plain-RTG and biomolecule-functionalized-RTG both under 3-dimensional (3D) conditions. Traditional 2D biomolecule-coated dishes were used as controls. We found that the RTG-lysine stimulated NRVM to spread and form heart-like functional syncytia. Regarding cell contraction, in both RTG and RTG-lysine, beating cells were recorded after 21 days. Additionally, more than 50% (p value < 0.05; n = 5) viable ARVMs, characterized by a well-defined cardiac phenotype represented by sarcomeric cross-striations, were found in the RTG-laminin after 8 days. These results exhibit the tremendous potential of a minimally invasive CM transplantation through our designed RTG-cell therapy platform.

Physical characterization of alginate-Pluronic F127 gel for endoluminal NABDs delivery.

Here we focus the attention on the physical characteristics of a highly biocompatible hydrogel made up of crosslinked alginate and Pluronic F127 (PF127). This is a composite polymeric blend we propose for artery endoluminal delivery of an emerging class of molecules named nucleic acid based drugs (NABDs). The physical characterization of our composite gel, i.e. mesh size distribution and PF127-alginate mutual organization after crosslinking, can significantly determine the NABDs release kinetics. Thus, to explore these aspects, different technical approaches, i.e. rheology, low/high field NMR and TEM, were used. While rheology provided information at the macroscopic and nano-level, the other three approaches gave details at the nano-level. We observe that Pluronic micelles, organizing in cubic ordered domains, generate, upon alginate crosslinking, the formation of meshes (≈ 150 nm) larger than those occurring in a Pluronic-free alginate network (≈ 25 nm). Nevertheless, smaller alginate meshes are still on and can just host un-structured Pluronic micelles and water. Accordingly, the gel structure is quite inhomogeneous, where big meshes (filled by crystalline Pluronic) co-exist with smaller meshes (hosting water and un-structured PF127 micelles). While big meshes offer a considerable hindering action on a diffusing solute, smaller ones represent a sort of free space where solute diffusion is faster. The presence of big and small meshes indicates that drug release may follow a double kinetics characterized by a fast and slow release. Notably, this behavior is considered appropriate for endoluminal drug release to the arterial wall.

Microencapsulation of bioactive principles with an airless spray-gun suitable for processing high viscous solutions.

PURPOSE: to design, assemble and test a prototype of a novel production plant, suitable for producing microparticles (MPs) by processing highly viscous feed solutions (FSs). METHODS: the prototype has been built using a commercial air compressor, a piston pump, an airless spray-gun, a customized air-treatment section, a timer, a rotating base, and a filtration section. Preliminary prototype parameter setting was carried out to individuate the best performing nozzle's dimension, the nebulization timing, and the CaCl2 concentration in the gelation fluid. In addition, prototype throughput (1 L to 5 L) and the range of practicable feed solution (FS) viscosities were assayed. A set of four batches was prepared in order to characterize the MPs, in terms of mean particle size and distribution, flow properties, swelling, encapsulation efficiency and release. RESULTS: according to a qualitative scoring, the large nozzle was suitable to nebulize FSs at a higher alginate concentration. Conversely, the small nozzle performed better in the processing of FSs with an alginate concentration up to 2% w/v. Only at the highest degree of viscosity, corresponding to 5% w/v of alginate, the FS processing was not technically possible. Among the CaCl2 concentrations considered, 15% w/v was recognized as the most versatile. The prototype appears to be convenient and suitable to grant a high yield starting from 2 L of FS. The flow behavior of the FSs assayed can be satisfactorily described with the Carreau-Yasuda equation and the throughput begins to slightly decrease for FSs at alginate concentrations exceeding 3% w/v. MP morphology was irregular with crumpled shape. The angle of repose indicates a good flowability and the release studies showed gastro-resistance and potential prolonged release applications. CONCLUSIONS: the novel prototype of production plant is suitable to process large amounts (2 L or more) of FSs, characterized by a high viscosity, to produce MPs suitable for bioactive principle delivery.

Polysaccharide-based polyanion--polycation--polyanion ternary systems. A preliminary analysis of interpolyelectrolyte interactions in dilute solutions.

The present contribution deals with the preparation and characterization of ternary mixtures of polysaccharides with potential applications in the field of tissue engineering. Two natural polyanions, i.e., alginate and hyaluronic acid, and a polycation, a lactose-modified chitosan (chitlac), were mixed in dilute conditions. The miscibility between the three components was explored in the presence of different amounts of supporting simple salt. These analyses allowed to identify the experimental conditions avoiding polymer phase separation and leading to either solution of independent polymers or soluble nonstoichiometric interpolyelectrolyte complexes. The characterization of the interpolyelectrolyte complexes was tackled by means of viscometry, light scattering, fluorescence quenching, and energy transfer. The electrostatic interactions taking place among the different polyelectrolytes led to synergistic effects on the viscosity of the polymer mixtures which strongly depend on the ionic strength. It has been found that, starting from binary soluble complexes of alginate and chitlac, the addition of hyaluronan led to the dissolution of the complexes. At variance, the addition of alginate to a phase-separated binary mixture of hyaluronan and chitlac led to the formation of soluble complexes composed of all three polysaccharides and, eventually, to their dissolution. In addition, the results showed that at low ionic strength the overall properties of the ternary mixtures depend on their order of mixing.

Mechanical spectroscopy and relaxometry on alginate hydrogels: a comparative analysis for structural characterization and network mesh size determination.

The structure of calcium-saturated alginate hydrogels has been studied by combining rheological determinations and relaxometry measurements. The mechanical spectroscopy analyses performed on alginate gel cylinders at different polysaccharide concentration allowed estimating their main structural features such as the average mesh size. The calculation was based on the introduction of a front factor in the classical rubber elasticity approach which was correlated to the average length of the Guluronic acid blocks along the polysaccharide chain. Transverse relaxation time (T(2)) determinations performed on the cylinders revealed the presence of two relaxation rates of the water entrapped within the hydrogel network. The cross-correlation of the latter data with the rheological measurements allowed estimating the mesh size distribution of the hydrogel network. The results obtained for the hydrogel cylinders were found to be consistent with the relaxometric analysis performed on the alginate microbeads where, however, only one type of water bound into the network structure was detected. A good correlation was found in the average mesh size determined by means of relaxometric measurements on alginate microbeads and by a statistical analysis performed on TEM micrographs. Finally, the addition of a solution containing calcium ions allowed investigating further the different water relaxation modes within alginate hydrogels.

Structural characterization of calcium alginate matrices by means of mechanical and release tests.

In this paper we have concentrated on the characterization of calcium alginate hydrogels loaded with a model drug (myoglobin) by means of a mechanical approach; in addition, release tests of myoglobin from alginate hydrogels were performed. At a fixed temperature, relaxation tests (mechanical study) were carried out on matrices constituted by different polymer concentrations. The interpretation of the relaxation behavior of the different matrices was conducted using the generalized Maxwell model; as a result of this investigation it was possible to conclude that for polymer concentrations greater than 0.5 g/ 100 mL the matrices behaved as solid materials. In addition, it was observed that the mechanical properties of the matrices increased with polymer concentration. With regard to the release tests, the diffusion coefficient of myoglobin in the matrix in relation to polymer concentrations was determined. The mechanical and release data where then analyzed by Flory's theory and by a modified free-volume theory, respectively, to estimate the network mesh size xi. The comparison between the mesh sizes obtained by the two approaches showed a satisfactory agreement for polymer concentrations greater than 0.5 g/100 mL. It should be noted that the approach proposed here to determine the polymeric network meshes is absolutely general and can be advantageously applied to the characterization of other similar polymeric systems.

Rheological behavior and structural interpretation of waxy crude oil gels.

A waxy crude oil which gels below a threshold temperature has been investigated under static and dynamic conditions, using a combination of rheological methods, optical microscopy, and DSC. Particular attention is given in this work to the influence of the mechanical history on gel strength and to describing the time-dependent rheological behavior. The gels display a strong dependence of the yield stress and moduli on the shear history, cooling rate, and stress loading rate. Of particular interest is the partial recovery of the gel structure after application of small stress or strain (much smaller than the critical values needed for flow onset) during cooling, which can be used to reduce the ultimate strength of the crude oil gel formed below the pour point. A second focus of this study is to further develop the physical interpretation of the mechanism by which wax crystallization produces gelation. Gelation of the waxy crude oil studied is suggested to be the result of the association between wax crystals, which produces an extended network structure, and it is shown that the system displays features common to attractive colloidal gels, for one of which, fumed silica (Aerosil 200) in paraffin oil, rheological data are reported. The colloidal gel model provides a simple and economical basis for explaining the response of the gelled oil to various mechanical perturbations and constitutes a fruitful basis from which to develop technologies for controlling the gelation phenomenon, as suggested by the rheological results reported.