Novel Treatment of Pyoderma Gangrenosum With Porcine-Derived Extracellular Matrix Following Bilateral Latissimus Dorsi Breast Reconstruction: A Case Report.

Pyoderma gangrenosum (PG) is a rare disease characterized by ulcerative cutaneous lesions that can occur postoperatively and is often associated with autoimmune disorders. PG is diagnosed by excluding other conditions that can cause ulcerations, such as infections, which may also result in immunosuppressive treatment delays and suboptimal wound care. Operative debridement of wounds has traditionally been avoided in the acute setting secondary to pathergy. This article presents a case of extensive breast PG that was successfully treated with surgical debridement, porcine-derived extracellular matrix, and negative pressure wound therapy while on systemic immunosuppressive therapy.

Utilization of Topical Polysporin and Triamcinolone for the Treatment of Hypergranulation Tissue.

Hypergranulation is the abnormal accumulation of granulation tissue in a wound and is commonly seen in burns. It impairs wound healing and can predispose patients to infection. There is no gold standard treatment for hypergranulation tissue, but some options include surgical debridement, chemical cautery with silver nitrate, and topical steroids. Silver nitrate treatment is painful and can lead to scarring, so topical steroid use is on the rise. A retrospective review, between January 1, 2017 and August 30, 2021, at a tertiary burn center was performed to analyze outcomes of hypergranulation tissue after treatment with a topical 50/50 mixture of triamcinolone (Perrigo, Dublin, Ireland) and Polysporin (Johnson & Johnson, New Brunswick, NJ). One hundred and sixteen patients were treated with triamcinolone and Polysporin for hypergranulation tissue, although 24 did not meet inclusion criteria. Eighty-eight out of 92 patients were successfully treated until hypergranulation resolution, while 4/92(4.3%) required silver nitrate or surgery despite the topical cream to achieve resolution. In the 88 patients successfully treated until hypergranulation resolution, 99 areas of hypergranulation were treated. Forty-one of 99 (41.4%) hypergranulation areas resolved within 2 weeks. The average time to hypergranulation resolution was 27.5 ± 2.5 days. We found that a novel 50/50 mixture of triamcinolone and Polysporin topical ointment is an effective and safe treatment for hypergranulation tissue in burn wounds. Further prospective studies are needed to determine its efficacy and safety profile.

A Novel Method to Determine Patient Skin Type: The Skin Analyzer.

Measuring skin color for medical research in an objective and nonbiased manner usually requires expensive equipment such as spectrophotometry and requires the subject to be present in person. We present a novel method to measure skin color from photographs using the Skin Analyzer application as a more effective, accessible, and efficient alternative. A desktop application, the Skin Analyzer, was developed to convert skin samples collected from digital images to the L*a*b color space and uses those values to calculate an individual typology angle that correlates to a Fitzpatrick skin type. To assess accuracy in variable lighting, six known colors representing the six Fitzpatrick skin types were printed and photographed in 15 separate locations within the hospital. To account for user variability in sample selection, interrater reliability was calculated with data generated by 13 untrained users testing the app on six subjects. The accuracy of measuring known values, which is the classification accuracy, was calculated to be 80%. Krippendorff alpha test was used to evaluate interrater reliability. The obtained alpha of 0.84 indicates a high interrater reliability. The high accuracy and reliability make the Skin Analyzer a suitable method of objectively determining Fitzpatrick skin type from images. The app may be used to investigate the effects of skin tone in various areas of interest, especially in retrospective studies where skin colorimeters cannot be used.

Evaluation in a porcine wound model and long-term clinical assessment of an autologous heterogeneous skin construct used to close full-thickness wounds.

Acute and chronic wounds involving deeper layers of the skin are often not adequately healed by dressings alone and require therapies such as skin grafting, skin substitutes, or growth factors. Here we report the development of an autologous heterogeneous skin construct (AHSC) that aids wound closure. AHSC is manufactured from a piece of healthy full-thickness skin. The manufacturing process creates multicellular segments, which contain endogenous skin cell populations present within hair follicles. These segments are physically optimized for engraftment within the wound bed. The ability of AHSC to facilitate closure of full thickness wounds of the skin was evaluated in a swine model and clinically in 4 patients with wounds of different etiologies. Transcriptional analysis demonstrated high concordance of gene expression between AHSC and native tissues for extracellular matrix and stem cell gene expression panels. Swine wounds demonstrated complete wound epithelialization and mature stable skin by 4 months, with hair follicle development in AHSC-treated wounds evident by 15 weeks. Biomechanical, histomorphological, and compositional analysis of the resultant swine and human skin wound biopsies demonstrated the presence of epidermal and dermal architecture with follicular and glandular structures that are similar to native skin. These data suggest that treatment with AHSC can facilitate wound closure.

Breast Paraffinoma: A Case Report of 20-Year-Old Mineral Oil Injection in a Male Patient.

Background: Mineral oil injection represents a dated practice of rapid and inexpensive breast augmentation. After a latency period, surrounding tissue becomes inflamed and fibrotic. Breast paraffinoma is well-documented in women; however, only 3 cases of such masses in male patients exist in the literature. Methods: We present a case of paraffinoma in a 63-year-old man from Puerto Rico who, desiring breasts, serially injected mineral oil into each breast daily for 13 years. Conservative management was initially attempted due to cardiac comorbidities and insurance authorization issues. The patient ultimately developed erosive wounds and therefore underwent excision of the bilateral breast masses as an en bloc specimen weighing 2.17 kg. Results: Pathology indicated sclerosing lipogranulomatosis (paraffinoma). The quality of the wounds remaining warranted negative pressure wound therapy with serial debridement. The patient went on to successful reconstruction with a reverse abdominoplasty preserving periumbilical and intercostal perforators. Conclusions: Plastic surgeons must educate patients against using exogenous injected materials for augmentation of the breasts, penis, or buttocks. Although uncommon in the US, certain populations like body builders and foreign immigrants are at higher risk for current or prior injection practices. Reverse abdominoplasty is a viable reconstructive modality for the large resulting defect.

Omental Flap to Non-healing Posterior Trunk Wound: A Case Report.

Large posterior trunk wounds often require flap reconstruction. One option for posterior truncal reconstruction not readily considered, often due to the combined anterior and posterior approaches required for harvesting and coverage, is the omental flap; however, the omental flap stands as a robust backup in non-healing wounds when local flap options have been exhausted. We present a case of a posterior trunk wound that had previously undergone multiple unsuccessful local and regional flaps for reconstruction and was ultimately treated with a pedicled omental flap which went on to heal without any post-operative complications.

A rare concurrence of Muir-Torre-associated sebaceous carcinoma in the setting of a lipedematous scalp.

Muir-Torre syndrome (MTS) a genetic disorder characterized by predisposition to cutaneous neoplasms. Lipedematous scalp is characterized by the presentation of a thick, sponge-like scalp due to the altered and increased deposition of adipose tissue. We present a case of Muir-Torre-associated sebaceous carcinoma of the scalp consistent with a lipedematous scalp.

Heparin-Induced Fever: A Case Report and Literature Review.

Burn patients are often plagued by fever due to the inflammatory nature of their injuries as well as the normal postoperative systemic inflammatory response syndrome. One etiology for fever, often not initially considered, is drug-induced fever. A rare cause of drug-induced fever is heparin with only one documented case reported in the literature. We present a case of heparin-induced fever in a patient who experienced a 32% total BSA friction burn after a motorcycle crash.

Designs and techniques that improve the pullout strength of pedicle screws in osteoporotic vertebrae: current status.

Osteoporosis is a medical condition affecting men and women of different age groups and populations. The compromised bone quality caused by this disease represents an important challenge when a surgical procedure (e.g., spinal fusion) is needed after failure of conservative treatments. Different pedicle screw designs and instrumentation techniques have been explored to enhance spinal device fixation in bone of compromised quality. These include alterations of screw thread design, optimization of pilot hole size for non-self-tapping screws, modification of the implant's trajectory, and bone cement augmentation. While the true benefits and limitations of any procedure may not be realized until they are observed in a clinical setting, axial pullout tests, due in large part to their reproducibility and ease of execution, are commonly used to estimate the device's effectiveness by quantifying the change in force required to remove the screw from the body. The objective of this investigation is to provide an overview of the different pedicle screw designs and the associated surgical techniques either currently utilized or proposed to improve pullout strength in osteoporotic patients. Mechanical comparisons as well as potential advantages and disadvantages of each consideration are provided herein.

In vitro evaluation of a lateral expandable cage and its comparison with a static device for lumbar interbody fusion: a biomechanical investigation.

OBJECT: Through in vitro biomechanical testing, the authors compared the performance of a vertically expandable lateral lumbar interbody cage (EC) under two different torque-controlled expansions (1.5 and 3.0 Nm) and with respect to an equivalent lateral lumbar static cage (SC) with and without pedicle screw fixation. METHODS: Eleven cadaveric human L2-3 segments were evaluated under the following conditions: 1) intact; 2) discectomy; 3) EC under 1.50 Nm of torque expansion (EC-1.5Nm); 4) EC under 3.00 Nm of torque expansion (EC-3.0Nm); 5) SC; and 6) SC with a bilateral pedicle screw system (SC+BPSS). Load-displacement behavior was evaluated for each condition using a combination of 100 N of axial preload and 7.5 Nm of torque in flexion and extension (FE), lateral bending (LB), and axial rotation (AR). Range of motion (ROM), neutral zone stiffness (NZS), and elastic zone stiffness (EZS) were statistically compared among conditions using post hoc Wilcoxon signed-rank comparisons after Friedman tests, with a significance level of 0.05. Additionally, any cage height difference between interbody devices was evaluated. When radiographic subsidence was observed, the specimen's data were not considered for the analysis. RESULTS: The final cage height in the EC-1.5Nm condition (12.1 ± 0.9 mm) was smaller (p < 0.001) than that in the EC-3.0Nm (13.9 ± 1.1 mm) and SC (13.4 ± 0.8 mm) conditions. All instrumentation reduced (p < 0.01) ROM with respect to the injury and increased (p ≤ 0.01) NZS in flexion, extension, and LB as well as EZS in flexion, LB, and AR. When comparing the torque expansions, the EC-3.0Nm condition had smaller (p < 0.01) FE and AR ROM and greater (p ≤ 0.04) flexion NZS, extension EZS, and AR EZS. The SC condition performed equivalently (p ≥ 0.10) to both EC conditions in terms of ROM, NZS, and EZS, except for EZS in AR, in which a marginal (p = 0.05) difference was observed with respect to the EC-3.0Nm condition. The SC+BPSS was the most rigid construct in terms of ROM and stiffness, except for 1) LB ROM, in which it was comparable (p = 0.08) with that of the EC-1.5Nm condition; 2) AR NZS, in which it was comparable (p > 0.66, Friedman test) with that of all other constructs; and 3) AR EZS, in which it was comparable with that of the EC-1.5Nm (p = 0.56) and SC (p = 0.08) conditions. CONCLUSIONS: A 3.0-Nm torque expansion of a lateral interbody cage provides greater immediate stability in FE and AR than a 1.5-Nm torque expansion. Moreover, the expandable device provides stability comparable with that of an equivalent (in size, shape, and bone-interface material) SC. Specifically, the SC+BPSS construct was the most stable in FE motion. Even though an EC may seem a better option given the minimal tissue disruption during its implantation, there may be a greater chance of endplate collapse by over-distracting the disc space because of the minimal haptic feedback from the expansion.