Mapping and Controlling Liquid Layer Thickness in Liquid-Phase (Scanning) Transmission Electron Microscopy.

Liquid-Phase (Scanning) Transmission Electron Microscopy (LP-(S)TEM) has become an essential technique to monitor nanoscale materials processes in liquids in real-time. Due to the pressure difference between the liquid and the microscope vacuum, bending of the silicon nitride (SiNx ) membrane windows generally occurs. This causes a spatially varying liquid layer thickness that makes interpretation of LP-(S)TEM results difficult due to a locally varying achievable resolution and diffusion limitations. To mediate these difficulties, it is shown: 1) how to quantitatively map liquid layer thickness for any liquid at less than 0.01 e- Å-2 total dose; 2) how to dynamically modulate the liquid thickness by tuning the internal pressure in the liquid cell, co-determined by the Laplace pressure and the external pressure. It is demonstrated that reproducible inward bulging of the window membranes can be realized, leading to an ultra-thin liquid layer in the central window area for high-resolution imaging. Furthermore, it is shown that the liquid thickness can be dynamically altered in a programmed way, thereby potentially overcoming the diffusion limitations towards achieving bulk solution conditions. The presented approaches provide essential ways to measure and dynamically adjust liquid thickness in LP-(S)TEM experiments, enabling new experiment designs and better control of solution chemistry.

A classical view on nonclassical nucleation.

Understanding and controlling nucleation is important for many crystallization applications. Calcium carbonate (CaCO3) is often used as a model system to investigate nucleation mechanisms. Despite its great importance in geology, biology, and many industrial applications, CaCO3 nucleation is still a topic of intense discussion, with new pathways for its growth from ions in solution proposed in recent years. These new pathways include the so-called nonclassical nucleation mechanism via the assembly of thermodynamically stable prenucleation clusters, as well as the formation of a dense liquid precursor phase via liquid-liquid phase separation. Here, we present results from a combined experimental and computational investigation on the precipitation of CaCO3 in dilute aqueous solutions. We propose that a dense liquid phase (containing 4-7 H2O per CaCO3 unit) forms in supersaturated solutions through the association of ions and ion pairs without significant participation of larger ion clusters. This liquid acts as the precursor for the formation of solid CaCO3 in the form of vaterite, which grows via a net transfer of ions from solution according to z Ca2+ + z CO32- → z CaCO3 The results show that all steps in this process can be explained according to classical concepts of crystal nucleation and growth, and that long-standing physical concepts of nucleation can describe multistep, multiphase growth mechanisms.

Kinetic Monte Carlo simulation of the photodegradation process of polyester-urethane coatings.

A numerical method to simulate reactions in a cross-linked polymer is developed and applied to the photodegradation process of polyester-urethane clearcoats during artificial exposure in a Weather-Ometer. This coarse-grained simulation method, which is based on a kinetic Monte Carlo scheme, is verified with experimental data on the depth-resolved changes in optical properties and chemical composition that have been previously determined. By modelling the depth-dependency of physical processes that occur in the coating, such as the absorption of photons and the diffusion of oxygen, the experimentally observed evolution of depth gradients in chemical composition can be well described by the simulation. A sensitivity analysis of individual simulation input parameters with respect to a set of resulting observables is performed and the results provide insight into the influence of specific reaction mechanisms on the overall degradation process and help to distinguish essential from less important processes. The values of input parameters that result in the most accurate simulation of the experimental data are determined with an optimisation procedure. In this way, the numerical values of several kinetic and physical parameters that are difficult to determine directly in an experimental way, such as various reaction rate constants, can be obtained from the simulations.

Nucleation and growth of monodisperse silica nanoparticles.

Although monodisperse amorphous silica nanoparticles have been widely investigated, their formation mechanism is still a topic of debate. Here, we demonstrate the formation of monodisperse nanoparticles from colloidally stabilized primary particles, which at a critical concentration undergo a concerted association process, concomitant with a morphological and structural collapse. The formed assemblies grow further by addition of primary particles onto their surface. The presented mechanism, consistent with previously reported observations, reconciles the different theories proposed to date.

Ion-association complexes unite classical and non-classical theories for the biomimetic nucleation of calcium phosphate.

Despite its importance in many industrial, geological and biological processes, the mechanism of crystallization from supersaturated solutions remains a matter of debate. Recent discoveries show that in many solution systems nanometre-sized structural units are already present before nucleation. Still little is known about the structure and role of these so-called pre-nucleation clusters. Here we present a combination of in situ investigations, which show that for the crystallization of calcium phosphate these nanometre-sized units are in fact calcium triphosphate complexes. Under conditions in which apatite forms from an amorphous calcium phosphate precursor, these complexes aggregate and take up an extra calcium ion to form amorphous calcium phosphate, which is a fractal of Ca(2)(HPO(4))(3)(2-) clusters. The calcium triphosphate complex also forms the basis of the crystal structure of octacalcium phosphate and apatite. Finally, we demonstrate how the existence of these complexes lowers the energy barrier to nucleation and unites classical and non-classical nucleation theories.

Should the Gibbs analysis be revised?

Recently, some arguments were published that cast doubt on the validity of the Gibbs adsorption isotherm. The doubt was on whether the often visible linearly declining part in the surface tension versus logarithm of concentration plot of a surfactant solution, just before the critical micelle concentration, really represents a situation of constant adsorption. Those published arguments are partly of a conceptual nature and partly based on experimental evidence. The conceptual arguments appear to be based on a misunderstanding of the theory, while the arguments based on experimental evidence stem from an inaccurate treatment of these data. Our conclusion is that none of the relevant arguments put forward are valid. The experimental evidence, if properly treated, is in line with the Gibbs theory.

Control of the electrical conductivity of composites of antimony doped tin oxide (ATO) nanoparticles and acrylate by grafting of 3-methacryloxypropyltrimethoxysilane (MPS).

The effect of the addition of antimony doped tin oxide (ATO) nanoparticles on the electrical conductivity of acrylate films is described. To enable dispersing of ATO in acrylate matrices, 3-methacryloxypropyltrimethoxysilane (MPS) was grafted on the surface of the filler. The amount of MPS used for this surface modification was found to strongly affect the electrical conductivity. Surface modification with a large amount of MPS resulted in colloidally stable dispersions of ATO, leading to a homogeneous distribution. Surface modification with small amounts of MPS led to instable ATO dispersions and aggregation of ATO into a fractal type network, which gives a much higher conductivity especially at low-volume fractions. For composites with a fractal type ATO network a second effect was found. Decreasing the amount of on ATO grafted MPS resulted in an increase of the electrical conduction between the ATO particles.

Oxidation of methyl linoleate in micellar solutions induced by the combination of iron(II)/ascorbic acid and iron(II)/H2O2.

The oxidation of methyl linoleate (ML) was studied in the presence of Fe(II) alone and its combination with either ascorbic acid (AsAH(2)) or hydrogen peroxide (H(2)O(2)) at different molar ratios. Reactions were carried out in micellar solutions of TTAB (tetradecyltrimethylammonium bromide) and SDS (sodium dodecyl sulfate), respectively, and were monitored by UV spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Fe(II) alone was able to catalyze the oxidation of ML in micellar solutions of TTAB, but not in those of SDS. The combination of H(2)O(2) with Fe(II) showed catalytic effect only in the TTAB medium, leading to different ML and Fe(II) oxidation kinetics compared to the Fe(II)-only catalyzed reactions. The AsAH(2)/Fe(II) combination demonstrated to be a good catalyst for the oxidation of ML in SDS micellar solutions, but not in TTAB micellar solutions; the activity of the catalyst was dependent on the AsAH(2)/Fe(II) molar ratio. The obtained results confirm that, for the ML oxidation to be initiated, the presence of a Fe(II)/Fe(III) couple is essential, which is related to the pH of micellar solutions. The catalytic properties of the AsAH(2)/Fe(II) combination were explained by taking into account the anti-oxidant and pro-oxidant properties of AsAH(2), as well as the possible formation of an iron/ascorbate complex as the initiator of the ML oxidation.

The Electroviscous Behavior of Aqueous Dispersions of Amorphous Silica (Ludox).

The electroviscous effects in very dilute aqueous dispersions of amorphous silica (Ludox) were investigated at various levels of salt, pH, and volume fraction (<0.01) of solids. Viscosities were much higher than predicted from existing theories, which is ascribed to the formation of a thick, gel-like surface layer on the particle. The volume of a particle adjusts itself almost reversibly to the salt and pH levels of the liquid and can grow up to four times the dry volume. This explains the apparent discrepancy between published dry and wet particle sizes and also the reported anomalously large number of bound water layers around a particle. The existence of a gel layer leads to an abnormally large amount of surface conductance; this may explain the anomalities found in electrophoresis. The validity of the model is also supported by published results of the amount of nonbulk water as found with NMR. Copyright 2001 Academic Press.