Biophysical Characterization and Cryopreservation of Mammalian Cells Using Ionic Liquids.

Ionic liquids (ILs) are a diverse class of solvents which can be selected for task-specific properties, making them attractive alternatives to traditional solvents. To tailor ILs for specific biological applications, it is necessary to understand the structure-property relationships of ILs and their interactions with cells. Here, a selection of carboxylate anion-based ILs were investigated as cryoprotectants, which are compounds added to cells before freezing to mitigate lethal freezing damage. The cytotoxicity, cell permeability, thermal behavior, and cryoprotective efficacy of the ILs were assessed with two model mammalian cell lines. We found that the biophysical interactions, including permeability of the ILs, were influenced by considering the IL pair together, rather than as single species acting independently. All of the ILs tested had high cytotoxicity, but ethylammonium acetate demonstrated good cryoprotective efficacy for both cell types tested. These results demonstrate that despite toxicity, ILs may be suitable for certain biological applications. It also demonstrates that more research is required to understand the contribution of ion pairs to structure-property relationships and that knowing the behavior of a single ionic species will not necessarily predict its behavior as part of an IL.

Rational Atom Substitution to Obtain Efficient, Lead-Free Photocatalytic Perovskites Assisted by Machine Learning and DFT Calculations.

Inorganic lead-free halide perovskites, devoid of toxic or rare elements, have garnered considerable attention as photocatalysts for pollution control, CO2 reduction and hydrogen production. In the extensive perovskite design space, factors like substitution or doping level profoundly impact their performance. To address this complexity, a synergistic combination of machine learning models and theoretical calculations were used to efficiently screen substitution elements that enhanced the photoactivity of substituted Cs2 AgBiBr6 perovskites. Machine learning models determined the importance of d10 orbitals, highlighting how substituent electron configuration affects electronic structure of Cs2 AgBiBr6 . Conspicuously, d10 -configured Zn2+ boosted the photoactivity of Cs2 AgBiBr6 . Experimental verification validated these model results, revealing a 13-fold increase in photocatalytic toluene conversion compared to the unsubstituted counterpart. This enhancement resulted from the small charge carrier effective mass, as well as the creation of shallow trap states, shifting the conduction band minimum, introducing electron-deficient Br, and altering the distance between the B-site cations d band centre and the halide anions p band centre, a parameter tuneable through d10 configuration substituents. This study exemplifies the application of computational modelling in photocatalyst design and elucidating structure-property relationships. It underscores the potential of synergistic integration of calculations, modelling, and experimental analysis across various applications.

Accelerating the prediction of CO2 capture at low partial pressures in metal-organic frameworks using new machine learning descriptors.

Metal-Organic frameworks (MOFs) have been considered for various gas storage and separation applications. Theoretically, there are an infinite number of MOFs that can be created; however, a finite amount of resources are available to evaluate each one. Computational methods can be adapted to expedite the process of evaluation. In the context of CO2 capture, this paper investigates the method of screening MOFs using machine learning trained on molecular simulation data. New descriptors are introduced to aid this process. Using all descriptors, it is shown that machine learning can predict the CO2 adsorption, with an R2 of above 0.9. The introduced Effective Point Charge (EPoCh) descriptors, which assign values to frameworks' partial charges based on the expected CO2 uptake of an equivalent point charge in isolation, are shown to be the second most important group of descriptors, behind the Henry coefficient. Furthermore, the EPoCh descriptors are hundreds of thousands of times faster to obtain compared with the Henry coefficient, and they achieve similar results when identifying top candidates for CO2 capture using pseudo-classification predictions.

Synthesis of Layered Lead-Free Perovskite Nanocrystals with Precise Size and Shape Control and Their Photocatalytic Activity.

Halide perovskites have attracted enormous attention due to their potential applications in optoelectronics and photocatalysis. However, concerns over their instability, toxicity, and unsatisfactory efficiency have necessitated the development of lead-free all-inorganic halide perovskites. A major challenge in designing efficient halide perovskites for practical applications is the lack of effective methods for producing nanocrystals with precise size and shape control. In this work, a layered perovskite, Cs4ZnSb2Cl12 (CZS), is found from calculations to exhibit size- and facet-dependent optoelectronic properties in the nanoscale, and thus, a colloidal method is used to synthesize the CZS nanoparticles with size-tunable morphologies: zero- (nanodots), one- (nanowires and nanorods), two- (nanoplates), and three-dimensional (nanopolyhedra). The growth kinetics of the CZS nanostructures, along with the effects of surface ligands, reaction temperature, and time were investigated. The optoelectronic properties of the nanocrystals varied with size due to quantum confinement effects and with shape due to anisotropy within the crystals and the exposure of specific facets. These properties could be modulated to enhance the visible-light photocatalytic performance for toluene oxidation. In particular, the 9.7 nm CZS nanoplates displayed a toluene to benzaldehyde conversion rate of 1893 µmol g-1 h-1 (95% selectivity), 500 times higher than the bulk synthesized CZS, and comparable with the reported photocatalysts. This study demonstrates the integration of theoretical calculations and synthesis, revealing an approach to the design and fabrication of novel, high-performance colloidal perovskite nanocrystals for optoelectronic and photocatalytic applications.

Quantum Chemistry-Machine Learning Approach for Predicting Properties of Lewis Acid-Lewis Base Adducts.

Synthetic design allowing predictive control of charge transfer and other optoelectronic properties of Lewis acid adducts remains elusive. This challenge must be addressed through complementary methods combining experimental with computational insights from first principles. Ab initio calculations for optoelectronic properties can be computationally expensive and less straightforward than those sufficient for simple ground-state properties, especially for adducts of large conjugated molecules and Lewis acids. In this contribution, we show that machine learning (ML) can accurately predict density functional theory (DFT)-calculated charge transfer and even properties associated with excited states of adducts from readily obtained molecular descriptors. Seven ML models, built from a dataset of over 1000 adducts, show exceptional performance in predicting charge transfer and other optoelectronic properties with a Pearson correlation coefficient of up to 0.99. More importantly, the influence of each molecular descriptor on predicted properties can be quantitatively evaluated from ML models. This contributes to the optimization of a priori design of Lewis adducts for future applications, especially in organic electronics.

Machine Learning in the Development of Adsorbents for Clean Energy Application and Greenhouse Gas Capture.

Addressing climate change challenges by reducing greenhouse gas levels requires innovative adsorbent materials for clean energy applications. Recent progress in machine learning has stimulated technological breakthroughs in the discovery, design, and deployment of materials with potential for high-performance and low-cost clean energy applications. This review summarizes basic machine learning methods-data collection, featurization, model generation, and model evaluation-and reviews their use in the development of robust adsorbent materials. Key case studies are provided where these methods are used to accelerate adsorbent materials design and discovery, optimize synthesis conditions, and understand complex feature-property relationships. The review provides a concise resource for researchers wishing to use machine learning methods to rapidly develop effective adsorbent materials with a positive impact on the environment.

Membrane Permeating Macrocycles: Design Guidelines from Machine Learning.

The ability to predict cell-permeable candidate molecules has great potential to assist drug discovery projects. Large molecules that lie beyond the Rule of Five (bRo5) are increasingly important as drug candidates and tool molecules for chemical biology. However, such large molecules usually do not cross cell membranes and cannot access intracellular targets or be developed as orally bioavailable drugs. Here, we describe a random forest (RF) machine learning model for the prediction of passive membrane permeation rates developed using a set of over 1000 bRo5 macrocyclic compounds. The model is based on easily calculated chemical features/descriptors as independent variables. Our random forest (RF) model substantially outperforms a multiple linear regression model based on the same features and achieves better performance metrics than previously reported models using the same underlying data. These features include: (1) polar surface area in water, (2) the octanol-water partitioning coefficient, (3) the number of hydrogen-bond donors, (4) the sum of the topological distances between nitrogen atoms, (5) the sum of the topological distances between nitrogen and oxygen atoms, and (6) the multiple molecular path count of order 2. The last three features represent molecular flexibility, the ability of the molecule to adopt different conformations in the aqueous and membrane interior phases, and the molecular "chameleonicity." Guided by the model, we propose design guidelines for membrane-permeating macrocycles. It is anticipated that this model will be useful in guiding the design of large, bioactive molecules for medicinal chemistry and chemical biology applications.

Machine Learning for Electrocatalyst and Photocatalyst Design and Discovery.

Electrocatalysts and photocatalysts are key to a sustainable future, generating clean fuels, reducing the impact of global warming, and providing solutions to environmental pollution. Improved processes for catalyst design and a better understanding of electro/photocatalytic processes are essential for improving catalyst effectiveness. Recent advances in data science and artificial intelligence have great potential to accelerate electrocatalysis and photocatalysis research, particularly the rapid exploration of large materials chemistry spaces through machine learning. Here a comprehensive introduction to, and critical review of, machine learning techniques used in electrocatalysis and photocatalysis research are provided. Sources of electro/photocatalyst data and current approaches to representing these materials by mathematical features are described, the most commonly used machine learning methods summarized, and the quality and utility of electro/photocatalyst models evaluated. Illustrations of how machine learning models are applied to novel electro/photocatalyst discovery and used to elucidate electrocatalytic or photocatalytic reaction mechanisms are provided. The review offers a guide for materials scientists on the selection of machine learning methods for electrocatalysis and photocatalysis research. The application of machine learning to catalysis science represents a paradigm shift in the way advanced, next-generation catalysts will be designed and synthesized.

Machine learning investigation of viscosity and ionic conductivity of protic ionic liquids in water mixtures.

Ionic liquids (ILs) are well classified as designer solvents based on the ease of tailoring their properties through modifying the chemical structure of the cation and anion. However, while many structure-property relationships have been developed, these generally only identify the most dominant trends. Here, we have used machine learning on existing experimental data to construct robust models to produce meaningful predictions across a broad range of cation and anion chemical structures. Specifically, we used previously collated experimental data for the viscosity and conductivity of protic ILs [T. L. Greaves and C. J. Drummond, Chem. Rev. 115, 11379-11448 (2015)] as the inputs for multiple linear regression and neural network models. These were then used to predict the properties of all 1827 possible cation-anion combinations (excluding the input combinations). These models included the effect of water content of up to 5 wt. %. A selection of ten new protic ILs was then prepared, which validated the usefulness of the models. Overall, this work shows that relatively sparse data can be used productively to predict physicochemical properties of vast arrays of ILs.

Prediction of O2/N2 Selectivity in Metal-Organic Frameworks via High-Throughput Computational Screening and Machine Learning.

Machine learning (ML), which is becoming an increasingly popular tool in various scientific fields, also shows the potential to aid in the screening of materials for diverse applications. In this study, the computation-ready experimental (CoRE) metal-organic framework (MOF) data set for which the O2 and N2 uptakes, self-diffusivities, and Henry's constants were calculated was used to fit the ML models. The obtained models were subsequently employed to predict such properties for a hypothetical MOF (hMOF) data set and to identify structures having a high O2/N2 selectivity at room temperature. The performance of the model on known entries indicated that it would serve as a useful tool for the prediction of MOF characteristics with r2 correlations between the true and predicted values typically falling between 0.7 and 0.8. The use of different descriptor groups (geometric, atom type, and chemical) was studied; the inclusion of all descriptor groups yielded the best overall results. Only a small number of entries surpassed the performance of those in the CoRE MOF set; however, the use of ML was able to present the structure-property relationship and to identity the top performing hMOFs for O2/N2 separation based on the adsorption and diffusion selectivity.

Design of Lipid-Based Nanocarriers via Cation Modulation of Ethanol-Interdigitated Lipid Membranes.

Short-chain alcohols (i.e., ethanol) can induce membrane interdigitation in saturated-chain phosphatidylcholines (PCs). In this process, alcohol molecules intercalate between phosphate heads, increasing lateral separation and favoring hydrophobic interactions between opposing acyl chains, which interpenetrate forming an interdigitated phase. Unraveling mechanisms underlying the interactions between ethanol and model lipid membranes has implications for cell biology, biochemistry, and for the formulation of lipid-based nanocarriers. However, investigations of ethanol-lipid membrane systems have been carried out in deionized water, which limits their applicability. Here, using a combination of small- and wide-angle X-ray scattering, small-angle neutron scattering, and all-atom molecular dynamics simulations, we analyzed the effect of varying CaCl2 and NaCl concentrations on ethanol-induced interdigitation. We observed that while ethanol addition leads to the interdigitation of bulk phase 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) bilayers in the presence of CaCl2 and NaCl regardless of the salt concentration, the ethanol-induced interdigitation of vesicular DPPC depends on the choice of cation and its concentration. These findings unravel a key role for cations in the ethanol-induced interdigitation of lipid membranes in either bulk phase or vesicular form.

Use of metamodels for rapid discovery of narrow bandgap oxide photocatalysts.

New photocatalysts are traditionally identified through trial-and-error methods. Machine learning has shown considerable promise for improving the efficiency of photocatalyst discovery from a large potential pool. Here, we describe a multi-step, target-driven consensus method using a stacking meta-learning algorithm that robustly predicts bandgaps and H2 evolution activities of photocatalysts. Trained on small datasets, these models can rapidly screen a large space (>10 million materials) to identify promising, non-toxic compounds as candidate water splitting photocatalysts. Two effective compounds and two controls possessing optimal bandgap values (∼2 eV) but not photoactivity as predicted by the models were synthesized. Their experimentally measured bandgaps and H2 evolution activities were consistent with the predictions. Conspicuously, the two compounds with strong photoactivities under UV and visible light are promising visible-light-driven water splitting photocatalysts. This study demonstrates the power of machine learning and the potential of big data to accelerate discovery of next-generation photocatalysts.

Systematic Comparison of the Structural and Dynamic Properties of Commonly Used Water Models for Molecular Dynamics Simulations.

Water is a unique solvent that is ubiquitous in biology and present in a variety of solutions, mixtures, and materials settings. It therefore forms the basis for all molecular dynamics simulations of biological phenomena, as well as for many chemical, industrial, and materials investigations. Over the years, many water models have been developed, and it remains a challenge to find a single water model that accurately reproduces all experimental properties of water simultaneously. Here, we report a comprehensive comparison of structural and dynamic properties of 30 commonly used 3-point, 4-point, 5-point, and polarizable water models simulated using consistent settings and analysis methods. For the properties of density, coordination number, surface tension, dielectric constant, self-diffusion coefficient, and solvation free energy of methane, models published within the past two decades consistently show better agreement with experimental values compared to models published earlier, albeit with some notable exceptions. However, no single model reproduced all experimental values exactly, highlighting the need to carefully choose a water model for a particular study, depending on the phenomena of interest. Finally, machine learning algorithms quantified the relationship between the water model force field parameters and the resulting bulk properties, providing insight into the parameter-property relationship and illustrating the challenges of developing a water model that can accurately reproduce all properties of water simultaneously.

Review on the Use of Artificial Intelligence to Predict Fire Performance of Construction Materials and Their Flame Retardancy.

The evaluation and interpretation of the behavior of construction materials under fire conditions have been complicated. Over the last few years, artificial intelligence (AI) has emerged as a reliable method to tackle this engineering problem. This review summarizes existing studies that applied AI to predict the fire performance of different construction materials (e.g., concrete, steel, timber, and composites). The prediction of the flame retardancy of some structural components such as beams, columns, slabs, and connections by utilizing AI-based models is also discussed. The end of this review offers insights on the advantages, existing challenges, and recommendations for the development of AI techniques used to evaluate the fire performance of construction materials and their flame retardancy. This review offers a comprehensive overview to researchers in the fields of fire engineering and material science, and it encourages them to explore and consider the use of AI in future research projects.

Machine learning approaches to understand and predict rate constants for organic processes in mixtures containing ionic liquids.

The ability to tailor the constituent ions in ionic liquids (ILs) is highly advantageous as it provides access to solvents with a range of physicochemical properties. However, this benefit also leads to large compositional spaces that need to be explored to optimise systems, often involving time consuming experimental work. The use of machine learning methods is an effective way to gain insight based on existing data, to develop structure-property relationships and to allow the prediction of ionic liquid properties. Here we have applied machine learning models to experimentally determined rate constants of a representative organic process (the reaction of pyridine with benzyl bromide) in IL-acetonitrile mixtures. Multiple linear regression (MLREM) and artificial neural networks (BRANNLP) were both able to model the data well. The MLREM model was able to identify the structural features on the cations and anions that had the greatest effect on the rate constant. Secondly, predictive MLREM and BRANNLP models were developed from the full initial set of rate constant data. From these models, a large number of predictions (>9000) of rate constant were made for mixtures of different ionic liquids, at different proportions of ionic liquid and molecular solvent, at different temperatures. A selection of these predictions were tested experimentally, including through the preparation of novel ionic liquids, with overall good agreement between the predicted and experimental data. This study highlights the benefits of using machine learning methods on kinetic data in ionic liquid mixtures to enable the development of rigorous structure-property relationships across multiple variables simultaneously, and to predict properties of new ILs and experimental conditions.

Janus particles: recent advances in the biomedical applications.

Janus particles, which are named after the two-faced Roman god Janus, have two distinct sides with different surface features, structures, and compositions. This asymmetric structure enables the combination of different or even incompatible physical, chemical, and mechanical properties within a single particle. Much effort has been focused on the preparation of Janus particles with high homogeneity, tunable size and shape, combined functionalities, and scalability. With their unique features, Janus particles have attracted attention in a wide range of applications such as in optics, catalysis, and biomedicine. As a biomedical device, Janus particles offer opportunities to incorporate therapeutics, imaging, or sensing modalities in independent compartments of a single particle in a spatially controlled manner. This may result in synergistic actions of combined therapies and multi-level targeting not possible in isotropic systems. In this review, we summarize the latest advances in employing Janus particles as therapeutic delivery carriers, in vivo imaging probes, and biosensors. Challenges and future opportunities for these particles will also be discussed.

Machine Learning Approaches for Further Developing the Understanding of the Property Trends Observed in Protic Ionic Liquid Containing Solvents.

Ionic liquid containing solvent systems are candidates for very large compositional space exploration due to the immensity of the possible combination of ions and molecular species. The prediction of key properties of such multicomponent solvent systems plays a vital role in the design and optimization of their structures for specific applications. In this study, we have explored two machine learning algorithms for predicting the surface tension and liquid nanostructure of solvents containing a protic ionic liquid (PIL) with water and excess acid or base present. Machine learning algorithms of multiple linear regression (MLR) and Bayesian regularized artificial neural networks (ANNs) were used to develop semiempirical structure-property models for the data set, which was comprised of 207 surface tension and 80 liquid nanostructure data elements which we previously reported ( Phys. Chem. Chem. Phys. 2019, 21, 6810-6827). On the basis of the models, the significance levels for the impact of the alkyl chain length and the presence of hydroxyl groups on cation, type of anion, nonstoichiometry, and presence of water were elucidated. Both models are statistically applicable for designing new PIL containing solvent systems. Furthermore, the generated models were used to create response-surface plots, for both surface tension and liquid nanostructure, interpolated across the compositional space. An additional surface tension data set with 18 new data points within the same compositional space was used to test the prediction ability of models, and the results showed all of the models were successful for prediction. These machine learning approaches are highly suited to the development of structure-property relationships for ionic liquids and particularly for the increasing use of ionic liquid-molecular solvent mixtures.

Quantitative design rules for protein-resistant surface coatings using machine learning.

Preventing biological contamination (biofouling) is key to successful development of novel surface and nanoparticle-based technologies in the manufacturing industry and biomedicine. Protein adsorption is a crucial mediator of the interactions at the bio - nano -materials interface but is not well understood. Although general, empirical rules have been developed to guide the design of protein-resistant surface coatings, they are still largely qualitative. Herein we demonstrate that this knowledge gap can be addressed by using machine learning approaches to extract quantitative relationships between the material surface chemistry and the protein adsorption characteristics. We illustrate how robust linear and non-linear models can be constructed to accurately predict the percentage of protein adsorbed onto these surfaces using lysozyme or fibrinogen as prototype common contaminants. Our computational models could recapitulate the adsorption of proteins on functionalised surfaces in a test set with an r2 of 0.82 and standard error of prediction of 13%. Using the same data set that enabled the development of the Whitesides rules, we discovered an extension to the original rules. We describe a workflow that can be applied to large, consistently obtained data sets covering a broad range of surface functional groups and protein types.

Toward Cell Membrane Biomimetic Lipidic Cubic Phases: A High-Throughput Exploration of Lipid Compositional Space.

The bicontinuous lipidic cubic phase (LCP), which is based on the fundamental structure of the lipid bilayer, is increasingly used in a range of applications including drug delivery, in meso crystallization of membrane proteins, biosensors, and biofuel cells. The majority of LCPs investigated to date have been formulated from a single lipid or a combination of two lipids in water. Such systems lack tunability, with only a narrow range of lattice parameters adopted. In addition, the lipid bilayer of these materials lacks the complexity of natural cell membranes, which are composed of hundreds of different lipids and which may be essential to retaining the functionality of proteins embedded within them. In this work, we investigate the phase behavior of quaternary lipid-water systems consisting of three different lipids (monoolein-cholesterol-phospholipid) and water using a combination of experimental and simulation techniques. This study provides a large library of lipidic materials with bilayer compositions, which more effectively mimic the native cell membrane and significantly increased tunability based on nanostructural parameters such as lattice parameter, aqueous channel size, and bilayer thickness. Importantly, the library contained several extremely swollen cubic phases with a maximum lattice parameter of up to 342.5 Å. Many of these cubic phases were successfully dispersed into highly swollen cubosomes. The swollen cubic phases described in this article contain only uncharged lipids and are therefore particularly useful for applications with a high salt concentration, including encapsulation of larger therapeutic proteins and peptides for in vivo delivery, or for the crystallization of large membrane proteins such as GPCRs.(1).

Manipulating the Ordered Nanostructure of Self-Assembled Monoolein and Phytantriol Nanoparticles with Unsaturated Fatty Acids.

Mesophase structures of self-assembled lyotropic liquid crystalline nanoparticles are important factors that directly influence their ability to encapsulate and release drugs and their biological activities. However, it is difficult to predict and precisely control the mesophase behavior of these materials, especially in complex systems with several components. In this study, we report the controlled manipulation of mesophase structures of monoolein (MO) and phytantriol (PHYT) nanoparticles by adding unsaturated fatty acids (FAs). By using high throughput formulation and small-angle X-ray scattering characterization methods, the effects of FAs chain length, cis-trans isomerism, double bond location, and level of chain unsaturation on self-assembled systems are determined. Additionally, the influence of temperature on the phase behavior of these nanoparticles is analyzed. We found that in general, the addition of unsaturated FAs to MO and PHYT induces the formation of mesophases with higher Gaussian surface curvatures. As a result, a rich variety of lipid polymorphs are found to correspond with the increasing amounts of FAs. These phases include inverse bicontinuous cubic, inverse hexagonal, and discrete micellar cubic phases and microemulsion. However, there are substantial differences between the phase behavior of nanoparticles with trans FA, cis FAs with one double bond, and cis FAs with multiple double bonds. Therefore, the material library produced in this study will assist the selection and development of nanoparticle-based drug delivery systems with desired mesophase.