Empagliflozin reduces endoplasmic reticulum stress associated TXNIP/NLRP3 activation in tunicamycin-stimulated aortic endothelial cells.

Sodium-glucose cotransporter 2 inhibitors (SGLT2i) have proven to be of therapeutic significance for cardiovascular diseases beyond the treatment of type 2 diabetes. Recent studies have demonstrated the beneficial effects of SGLT2i on endothelial cell (EC) dysfunction, but the underlying cellular mechanisms remain to be clarified. In this study, we sought to understand the effect of empagliflozin (EMPA; Jardiance®) on cell homeostasis and endoplasmic reticulum (ER) stress signaling. ER stress was induced by tunicamycin (Tm) in human abdominal aortic ECs treated with EMPA over 24 h. Tm-induced ER stress caused increases in the protein expression of thioredoxin interacting protein (TXNIP), NLR-family pyrin domain-containing protein 3 (NLRP3), C/EBP homologous protein (CHOP), and in the ratio of phospho-eIF2α/eIF2α. EMPA (50-100 µM) resulted in a dampened downstream activation of ER stress as seen by the reduced expression of CHOP and TXNIP/NLRP3 in a dose-dependent manner. Nuclear factor erythroid 2-related factor 2 (nrf2) translocation was also attenuated in EMPA-treated ECs. These results suggest that EMPA improves redox signaling under ER stress which in turn attenuates the activation of TXNIP/NLRP3.

Improving the 3D Printability of Sugar Glass to Engineer Sacrificial Vascular Templates.

A prominent obstacle in scaling up tissue engineering technologies for human applications is engineering an adequate supply of oxygen and nutrients throughout artificial tissues. Sugar glass has emerged as a promising 3D-printable, sacrificial material that can be used to embed perfusable networks within cell-laden matrices to improve mass transfer. To characterize and optimize a previously published sugar ink, we investigated the effects of sucrose, glucose, and dextran concentration on the glass transition temperature (Tg), printability, and stability of 3D-printed sugar glass constructs. We identified a sucrose ink formulation with a significantly higher Tg (40.0 ± 0.9°C) than the original formulation (sucrose-glucose blend, Tg = 26.2 ± 0.4°C), which demonstrated a pronounced improvement in printability, resistance to bending, and final print stability, all without changing dissolution kinetics and decomposition temperature. This formulation allowed printing of 10-cm-long horizontal cantilever filaments, which can enable the printing of complex vascular segments along the x-, y-, and z-axes without the need for supporting structures. Vascular templates with a single inlet and outlet branching into nine channels were 3D printed using the improved formulation and subsequently used to generate perfusable alginate constructs. The printed lattice showed high fidelity with respect to the input geometry, although with some channel deformation after alginate casting and gelation-likely due to alginate swelling. Compared with avascular controls, no significant acute cytotoxicity was noted when casting pancreatic beta cell-laden alginate constructs around improved ink filaments, whereas a significant decrease in cell viability was observed with the original ink. The improved formulation lends more flexibility to sugar glass 3D printing by facilitating the fabrication of larger, more complex, and more stable sacrificial networks. Rigorous characterization and optimization methods for improving sacrificial inks may facilitate the fabrication of functional cellular constructs for tissue engineering, cellular biology, and other biomedical applications.

Exposure to the non-phthalate plasticizer di-heptyl succinate is less disruptive to C57bl/6N mouse recovery from a myocardial infarction than DEHP, TOTM or related di-octyl succinate.

Phthalate plasticizers are incorporated into plastics to make them soft and malleable, but are known to leach out of the final product into their surroundings with potential detrimental effects to human and ecological health. The replacement of widely-used phthalate plasticizers, such as di-ethylhexyl phthalate (DEHP), that are of known toxicity, by the commercially-available alternative Tris(2-ethylhexyl) tri-mellitate (TOTM) is increasing. Additionally, several newly designed "green" plasticizers, including di-heptyl succinate (DHPS) and di-octyl succinate (DOS) have been identified as potential replacements. However, the impact of plasticizer exposure from medical devices on patient recovery is unknown and, moreover, the safety of TOTM, DHPS, and DOS is not well established in the context of patient recovery. To study the direct effect of clinically based chemical exposures, we exposed C57bl/6 N male and female mice to DEHP, TOTM, DOS, and DHPS during recovery from cardiac surgery and assessed survival, cardiac structure and function, immune cell infiltration into the cardiac wound and activation of the NLRP3 inflammasome. Male, but not female, mice treated in vivo with DEHP and TOTM had greater cardiac dilation, reduced cardiac function, increased infiltration of neutrophils, monocytes, and macrophages and increased expression of inflammasome receptors and effectors, thereby suggesting impaired recovery in exposed mice. In contrast, no impact was detected in female mice and male mice exposed to DOS and DHPS. To examine the direct effects in cells involved in wound healing, we treated human THP-1 macrophages with the plasticizers in vitro and found DEHP induced greater NLRP3 expression and activation. These results suggest that replacing current plasticizers with non-phthalate-based plasticizers may improve patient recovery, especially in the male population. In our assessment, DHPS is a promising possibility for a non-toxic biocompatible plasticizer.

Ultrasoft edge-labelled hydrogel sensors reveal internal tissue stress patterns in invasive engineered tumors.

Measuring internal mechanical stresses within 3D tissues can provide important insights into drivers of morphogenesis and disease progression. Cell-sized hydrogel microspheres have recently emerged as a powerful technique to probe tissue mechanobiology, as they can be sufficiently soft as to deform within remodelling tissues, and optically imaged to measure internal stresses. However, measuring stresses at resolutions of ∼10 Pa requires ultrasoft, low-polymer content hydrogel formulations that are challenging to label with sufficiently fluorescent materials to support repeated measurements, particularly in optically dense tissues over 100 µm thick, as required in cancer tumor models. Here, we leverage thermodynamic partitioning of hydrogel components to create "edge-labelled" ultrasoft hydrogel microdroplets, in a single polymerization step. Bright and stable fluorescent nanoparticles preferentially polymerize at the hydrogel droplet interface, and can be used to repeatedly track sensor surfaces over long-term experiments, even when embedded deep in light-scattering tissues. We utilize these edge-labelled microspherical stress gauges (eMSGs) in inducible breast cancer tumor models of invasion, and demonstrate distinctive internal stress patterns that arise from cell-matrix interactions at different stages of breast cancer progression. Our studies demonstrate a long-term macroscale compaction of the tumor during matrix encapsulation, but only a short-term increase in local stress as non-invasive tumors rapidly make small internal reorganizations that reduce the mechanical stress to baseline levels. In contrast, once invasion programs are initiated, internal stress throughout the tumor is negligible. These findings suggest that internal tumor stresses may initially prime the cells to invade, but are lost once invasion occurs. Together, this work demonstrates that mapping internal mechanical stress in tumors may have utility in advancing cancer prognostic strategies, and that eMSGs can have broad utility in understanding dynamic mechanical processes of disease and development.

Thoracic Aortic Aneurysm Risk Assessment: A Machine Learning Approach.

Background: Traditional methods of risk assessment for thoracic aortic aneurysm (TAA) based on aneurysm size alone have been called into question as being unreliable in predicting complications. Biomechanical function of aortic tissue may be a better predictor of risk, but it is difficult to determine in vivo. Objectives: This study investigates using a machine learning (ML) model as a correlative measure of energy loss, a measure of TAA biomechanical function. Methods: Biaxial tensile testing was performed on resected TAA tissue collected from patients undergoing surgery. The energy loss of the tissue was calculated and used as the representative output. Input parameters were collected from clinical assessments including observations from medical scans and genetic paneling. Four ML algorithms including Gaussian process regression were trained in Matlab. Results: A total of 158 patients were considered (mean age 62 years, range 22-89 years, 78% male), including 11 healthy controls. The mean ascending aortic diameter was 47 ± 10 mm, with 46% having a bicuspid aortic valve. The best-performing model was found to give a greater correlative measure to energy loss (R2 = 0.63) than the surprisingly poor performance of aortic diameter (R2 = 0.26) and indexed aortic size (R2 = 0.32). An echocardiogram-derived stiffness metric was investigated on a smaller subcohort of 67 patients as an additional input, improving the correlative performance from R2 = 0.46 to R2 = 0.62. Conclusions: A preliminary set of models demonstrated the ability of a ML algorithm to improve prediction of the mechanical function of TAA tissue. This model can use clinical data to provide additional information for risk stratification.

Empagliflozin mitigates endothelial inflammation and attenuates endoplasmic reticulum stress signaling caused by sustained glycocalyx disruption.

The disruption of the endothelial cell (EC) glycocalyx (GCX) leads to cellular dysfunction promoting inflammation and cardiovascular disease progression. Recent studies have shown that empagliflozin (EMPA; Jardiance), a sodium-glucose cotransporter 2 inhibitor used in the treatment of type 2 diabetes, can improve EC functions impacted by GCX disruption although the exact cellular mechanisms remain to be elucidated. In this study, the effect of EMPA on EC inflammatory response induced by sustained GCX disruption was investigated. Human aortic ECs were cultured under shear (10 dyne/cm2) for 24 h with or without sustained degradation of heparan sulfate (HS). HS degradation increased inflammatory cell adhesion to ECs. EMPA (50 µM) normalized adhesion levels under sustained HS degradation. Protein expressions of eNOS, phospho-eNOS Ser1177 and ICAM-1 remained unchanged between conditions. Transcriptome analysis revealed the induction of the unfolded protein response (UPR) through the increased expression of ATF3, ATF4, DDIT3 (CHOP), EIF2AK3 (PERK), HSPA5 (Grp78), PPP1R15A (GADD34) and TRIB3 which was in part downregulated by EMPA. mRNA and protein expression of thioredoxin interacting protein (TXNIP) was also downregulated by EMPA. Mitigation of oxidative stress with N-Acetyl-L-cysteine resulted in similar reduction in inflammatory cell adhesion compared to EMPA which could indicate a potential mechanism by which EMPA normalized the inflammatory response. In conclusion, this study demonstrated the potential of EMPA to resolve the inflammatory response of ECs caused by sustained GCX disruption while altering UPR signaling under endoplasmic reticulum stress.

Wall stresses of early remodeled pulmonary autografts.

OBJECTIVE: The Ross procedure is an excellent option for children or young adults who need aortic valve replacement because it can restore survival to that of the normal aged-matched population. However, autograft remodeling can lead to aneurysmal formation and reoperation, and the biomechanics of this process is unknown. This study investigated postoperative autograft remodeling after the Ross procedure by examining patient-specific autograft wall stresses. METHODS: Patients who have undergone the Ross procedure who had intraoperative pulmonary root and aortic specimens collected were recruited. Patient-specific models (n = 16) were developed using patient-specific material property and their corresponding geometry from cine magnetic resonance imaging at 1-year follow-up. Autograft ± Dacron for aneurysm repair and ascending aortic geometries were reconstructed to develop patient-specific finite element models, which incorporated material properties and wall thickness experimentally measured from biaxial stretching. A multiplicative approach was used to account for prestress geometry from in vivo magnetic resonance imaging. Pressure loading to systemic pressure (120/80) was performed using LS-DYNA software (LSTC Inc, Livermore, Calif). RESULTS: At systole, first principal stresses were 809 kPa (25%-75% interquartile range, 691-1219 kPa), 567 kPa (485-675 kPa), 637 kPa (555-755 kPa), and 382 kPa (334-413 kPa) at the autograft sinotubular junction, sinuses, annulus, and ascending aorta, respectively. Second principal stresses were 360 kPa (310-426 kPa), 355 kPa (320-394 kPa), 272 kPa (252-319 kPa), and 184 kPa (147-222 kPa) at the autograft sinotubular junction, sinuses, annulus, and ascending aorta, respectively. Mean autograft diameters were 29.9 ± 2.7 mm, 38.3 ± 5.3 mm, and 26.6 ± 4.0 mm at the sinotubular junction, sinuses, and annulus, respectively. CONCLUSIONS: Peak first principal stresses were mainly located at the sinotubular junction, particularly when Dacron reinforcement was used. Patient-specific simulations lay the foundation for predicting autograft dilatation in the future after understanding biomechanical behavior during long-term follow-up.

An in vitro Perfused Macroencapsulation Device to Study Hemocompatibility and Survival of Islet-Like Cell Clusters.

Transplantation of hydrogel-encapsulated pancreatic islets is a promising long-term treatment for type 1 diabetes that restores blood glucose regulation while providing graft immunoprotection. Most human-scale islet encapsulation devices that rely solely on diffusion fail to provide sufficient surface area to meet islet oxygen demands. Perfused macroencapsulation devices use blood flow to mitigate oxygen limitations but increase the complexity of blood-device interactions. Here we describe a human-scale in vitro perfusion system to study hemocompatibility and performance of islet-like cell clusters (ILCs) in alginate hydrogel. A cylindrical perfusion device was designed for multi-day culture without leakage, contamination, or flow occlusion. Rat blood perfusion was assessed for prothrombin time and international normalized ratio and demonstrated no significant change in clotting time. Ex vivo perfusion performed with rats showed patency of the device for over 100 min using Doppler ultrasound imaging. PET-CT imaging of the device successfully visualized metabolically active mouse insulinoma 6 ILCs. ILCs cultured for 7 days under static conditions exhibited abnormal morphology and increased activated caspase-3 staining when compared with the perfused device. These findings reinforce the need for convective transport in macroencapsulation strategies and offer a robust and versatile in vitro system to better inform preclinical design.

3D printed ascending aortic simulators with physiological fidelity for surgical simulation.

Introduction: Three-dimensional (3D) printed multimaterial ascending aortic simulators were created to evaluate the ability of polyjet technology to replicate the distensibility of human aortic tissue when perfused at physiological pressures. Methods: Simulators were developed by computer-aided design and 3D printed with a Connex3 Objet500 printer. Two geometries were compared (straight tube and idealised aortic aneurysm) with two different material variants (TangoPlus pure elastic and TangoPlus with VeroWhite embedded fibres). Under physiological pressure, ß Stiffness Index was calculated comparing stiffness between our simulators and human ascending aortas. The simulators' material properties were verified by tensile testing to measure the stiffness and energy loss of the printed geometries and composition. Results: The simulators' geometry had no effect on measured ß Stiffness Index (p>0.05); however, ß Stiffness Index increased significantly in both geometries with the addition of embedded fibres (p<0.001). The simulators with rigid embedded fibres were significantly stiffer than average patient values (41.8±17.0, p<0.001); however, exhibited values that overlapped with the top quartile range of human tissue data suggesting embedding fibres can help replicate pathological human aortic tissue. Biaxial tensile testing showed that fiber-embedded models had significantly higher stiffness and energy loss as compared with models with only elastic material for both tubular and aneurysmal geometries (stiffness: p<0.001; energy loss: p<0.001). The geometry of the aortic simulator did not statistically affect the tensile tested stiffness or energy loss (stiffness: p=0.221; energy loss: p=0.713). Conclusion: We developed dynamic ultrasound-compatible aortic simulators capable of reproducing distensibility of real aortas under physiological pressures. Using 3D printed composites, we are able to tune the stiffness of our simulators which allows us to better represent the stiffness variation seen in human tissue. These models are a step towards achieving better simulator fidelity and have the potential to be effective tools for surgical training.

Distinct Expression of Nonmuscle Myosin IIB in Pulmonary Arteries of Patients With Aortic Stenosis vs Insufficiency Undergoing a Ross Procedure.

BACKGROUND: Clinical studies have revealed a greater risk of pulmonary autograft dilation after the Ross procedure in patients with preoperative aortic insufficiency (AI). The present study examined whether the morphologic, biomechanical, and cellular properties of the pulmonary artery (PA) from patients with AI were phenotypically different compared with patients diagnosed with aortic stenosis (AS). METHODS: PA segments were harvested from patients undergoing the Ross procedure for AS (n = 16) and AI (n = 6). Preoperative aortic annulus was significantly larger (P < 0.05) in patients with AI (28.5 ± 1.8 mm) vs AS (22.8 ± 1.2 mm). Morphologic, biomechanical, and cellular phenotypes of the PA were analyzed. RESULTS: Collagen and elastin content in the media of the PA wall were similar in patients with AS and AI. Elastic modulus and energy loss of the PA were not significantly different between the groups. In the media of the PA, expression of a panel of vascular smooth muscle cell-specific proteins were similar in patients with AS and AI. In contrast, nonmuscle myosin IIB protein levels in the PA of AS patients were significantly higher compared with AI patients, and immunofluorescence identified staining in α-smooth muscle actin-positive vascular smooth muscle cells. CONCLUSIONS: Despite similar morphological and biomechanical properties, the disparate expression of nonmuscle myosin IIB protein distinguishes the PA of patients with AI from patients with AS. The biological role in vascular smooth muscle cells and the potential contribution of nonmuscle myosin IIB to pulmonary autograft dilation in a subset of AI patients after the Ross procedure remain to be determined.

Empagliflozin restores the integrity of the endothelial glycocalyx in vitro.

The antihyperglycemic agent empagliflozin not only improves glycemic control but has also been associated with clinically meaningful reductions in cardiovascular events. Studies have shown that empagliflozin significantly reduces cardiovascular death and heart failure-associated hospitalizations. Given that endothelial dysfunction is closely linked with the pathogenesis of atherosclerotic cardiovascular disease, we hypothesized that the cardiovascular benefits observed with empagliflozin may be a result of its positive impact on the health of the endothelial glycocalyx (GCX), a critical component for the endothelium homeostasis. Human abdominal aortic endothelial cells (HAAECs) were either statically cultured or subjected to a steady wall shear stress of 10 dyne/cm2. Empagliflozin (50 µM, 24 h) restored heparinase III-mediated GCX disruption and the normal mechanotransduction responses in GCX-compromised HAAECs while reducing the attachment of all-trans retinoic acid-transformed NB4 cells to HAAECs. The current body of work suggests that the cardioprotective properties previously reported for empagliflozin may in part be due to the ability of empagliflozin to preserve and restore the structural integrity of the GCX, which in turn helps to maintain vascular health by promoting an anti-inflammatory endothelium, in the presence of a pro-inflammatory environment. Further studies are needed to fully understand the mechanisms underlying the cardiovascular benefits of empagliflozin.

Dispersible hydrogel force sensors reveal patterns of solid mechanical stress in multicellular spheroid cultures.

Understanding how forces orchestrate tissue formation requires technologies to map internal tissue stress at cellular length scales. Here, we develop ultrasoft mechanosensors that visibly deform under less than 10 Pascals of cell-generated stress. By incorporating these mechanosensors into multicellular spheroids, we capture the patterns of internal stress that arise during spheroid formation. We experimentally demonstrate the spontaneous generation of a tensional 'skin', only a few cell layers thick, at the spheroid surface, which correlates with activation of mechanobiological signalling pathways, and balances a compressive stress profile within the tissue. These stresses develop through cell-driven mechanical compaction at the tissue periphery, and suggest that the tissue formation process plays a critically important role in specifying mechanobiological function. The broad applicability of this technique should ultimately provide a quantitative basis to design tissues that leverage the mechanical activity of constituent cells to evolve towards a desired form and function.

Increased MMP activity in curved geometries disrupts the endothelial cell glycocalyx creating a proinflammatory environment.

Wall shear stress gradients (WSSGs) induce an inflammatory phenotype in endothelial cells (ECs) which is hypothesized to be mediated by mechanotransduction through the EC glycocalyx (GCX). We used a three-dimensional in vitro cell culture model with a 180o curved geometry to investigate if WSSGs created by curvature can cause EC inflammation and disruption of the GCX. The hydrodynamics of the model elicited a morphological response in ECs as well as a pattern of leukocyte adhesion towards the inner wall of curvature that was attenuated with enzymatic removal of GCX components. GCX degradation was also observed in regions of curvature which corresponded to increased activity of MMPs. Together, these results support the hypothesis that the EC GCX is involved in mechanotransduction of WSSGs and that components of the GCX are regulated by MMP activity in regions of curvature.

Transesophageal echocardiographic strain imaging predicts aortic biomechanics: Beyond diameter.

BACKGROUND: Clinical guidelines recommend resection of ascending aortic aneurysms at diameters 5.5 cm or greater to prevent rupture or dissection. However, approximately 40% of all ascending aortic dissections occur below this threshold. We propose new transesophageal echocardiography strain-imaging moduli coupled with blood pressure measurements to predict aortic dysfunction below the surgical threshold. METHODS: A total of 21 patients undergoing aortic resection were recruited to participate in this study. Transesophageal echocardiography imaging of the aortic short-axis and invasive radial blood pressure traces were taken for 3 cardiac cycles. By using EchoPAC (GE Healthcare, Madison, Wis) and postprocessing in MATLAB (MathWorks, Natick, Mass), circumferential stretch profiles were generated and combined with the blood pressure traces. From these data, 2 in vivo stiffness moduli were calculated: the Cardiac Cycle Pressure Modulus and Cardiac Cycle Stress Modulus. From the resected aortic ring, testing squares were isolated for ex vivo mechanical analysis and histopathology. Each square underwent equibiaxial tensile testing to generate stress-stretch profiles for each patient. Two ex vivo indices were calculated from these profiles (energy loss and incremental stiffness) for comparison with the Cardiac Cycle Pressure Modulus and Cardiac Cycle Stress Modulus. RESULTS: The echo-derived stiffness moduli demonstrate positive significant covariance with ex vivo tensile biomechanical indices: energy loss (vs Cardiac Cycle Pressure Modulus: R2 = 0.5873, P < .0001; vs Cardiac Cycle Stress Modulus: R2 = 0.6401, P < .0001) and apparent stiffness (vs Cardiac Cycle Pressure Modulus: R2 = 0.2079, P = .0378; vs Cardiac Cycle Stress Modulus: R2 = 0.3575, P = .0042). Likewise, these transesophageal echocardiography-derived moduli are highly predictive of the histopathologic composition of collagen and elastin (collagen/elastin ratio vs Cardiac Cycle Pressure Modulus: R2 = 0.6165, P < .0001; vs Cardiac Cycle Stress Modulus: R2 = 0.6037, P < .0001). CONCLUSIONS: Transesophageal echocardiography-derived stiffness moduli correlate strongly with aortic wall biomechanics and histopathology, which demonstrates the added benefit of using simple echocardiography-derived biomechanics to stratify patient populations.

3D printing materials and their use in medical education: a review of current technology and trends for the future.

3D printing is a new technology in constant evolution. It has rapidly expanded and is now being used in health education. Patient-specific models with anatomical fidelity created from imaging dataset have the potential to significantly improve the knowledge and skills of a new generation of surgeons. This review outlines five technical steps required to complete a printed model: They include (1) selecting the anatomical area of interest, (2) the creation of the 3D geometry, (3) the optimisation of the file for the printing and the appropriate selection of (4) the 3D printer and (5) materials. All of these steps require time, expertise and money. A thorough understanding of educational needs is therefore essential in order to optimise educational value. At present, most of the available printing materials are rigid and therefore not optimum for flexibility and elasticity unlike biological tissue. We believe that the manipuation and tuning of material properties through the creation of composites and/or blending materials will eventually allow for the creation of patient-specific models which have both anatomical and tissue fidelity.

Designing Green Plasticizers: Linear Alkyl Diol Dibenzoate Plasticizers and a Thermally Reversible Plasticizer.

Several linear alkyl diol dibenzoate compounds, ranging from C3 to C6 in central diol length, were evaluated for their plasticizing effectiveness in blends with poly(vinyl chloride) (PVC). The results were compared to blends of PVC/di(2-ethylhexyl) phthalate (DEHP), the most commonly used commercial plasticizer. DEHP has come under scrutiny, due to its suspected endocrine-disrupting behaviour, and the proposed diol dibenzoates have previously been shown to have the potential to be green, safe candidates for DEHP replacement. The thermal and mechanical properties of PVC/dibenzoate blends were determined, and include glass transition temperature (Tg), the elongation at break, maximum stress, apparent moduli, torsional modulus, and surface hardness. The C3, C5, and C6 dibenzoates performed as well as or better than DEHP, with the exception of torsional modulus, further supporting their use as green plasticizers. For blends with 1,4-butanediol dibenzoate, differential scanning calorimetry and torsional temperature sweeps suggested that the compound partly crystallizes within PVC blends over the course of two days, thereby losing the ability to effectively plasticize PVC. However, upon heating to temperatures above 60 °C, effective plasticization was again observed. 1,4-Butanediol dibenzoate is thereby a reversible heat-activated plasticizer or processing aid with excellent plasticizer properties at mildly elevated temperatures.

How Green is Your Plasticizer?

Plasticizers are additives that are used to impart flexibility to polymer blends and improve their processability. Plasticizers are typically not covalently bound to the polymers, allowing them to leach out over time, which results in human exposure and environmental contamination. Phthalates, in particular, have been the subject of increasing concern due to their established ubiquity in the environment and their suspected negative health effects, including endocrine disrupting and anti-androgenic effects. As there is mounting pressure to find safe replacement compounds, this review addresses the design and experimental elements that should be considered in order for a new or existing plasticizer to be considered green. Specifically, a multi-disciplinary and holistic approach should be taken which includes toxicity testing (both in vitro and in vivo), biodegradation testing (with attention to metabolites), as well as leaching studies. Special consideration should also be given to the design stages of producing a new molecule and the synthetic and scale-up processes should also be optimized. Only by taking a multi-faceted approach can a plasticizer be considered truly green.

Histopathological and biomechanical properties of the aortic wall in 2 patients with chronic type A aortic dissection.

Type A aortic dissection is an acute condition that requires urgent surgical intervention. However, in a subset of patients, aortic dissections go undiagnosed and become chronic, thereby allowing the dissected wall to undergo a distinct remodeling process from that of the surrounding intact wall. Here, we observe the biomechanical and histological changes in the aortic wall of two patients with chronic Type A aortic dissection. Partial or complete disruption of the elastic structure of the medial layer was observed in the dissected wall of both patients; however, aortic stiffness in the region of dissection covaried with a change in collagen content. A ~50% increase in viscous energy loss was observed in the region of dissection of both patients which suggests an impaired elastic recoil and Windkessel function of the proximal aorta. MMP expression (2 and 9) differed between the dissected and intact wall and was distinct between the two patients. Our observations suggest that an active remodeling process occurs in the dissected aortic wall resulting in a vastly different biomechanical behavior.

Stenosis Hemodynamics Disrupt the Endothelial Cell Glycocalyx by MMP Activity Creating a Proinflammatory Environment.

Hemodynamic forces are known to be able to induce an inflammatory phenotype in endothelial cells (ECs). The EC glycocalyx (GCX) is a dynamic structure which is regulated in response to different stimuli and hypothesized as an important contributor to the mechanotransduction of wall shear stresses (WSS). In this work, we used a three dimensional in vitro EC culture model with a 50% asymmetric stenosis to investigate degradation of the GCX by increased matrix metalloproteinase (MMP) activity in regions of WSS gradients and how this degradation might create a proinflammatory environment. Experiments showed GCX degradation was observed in regions of WSSGs created by a 50% asymmetric stenosis. Furthermore, inhibition of MMP activity abolished this regional degradation. The integrity of the GCX altered EC morphological elongation to flow and leukocyte adhesion patterns. These results help strengthen the hypothesis that the EC GCX is involved in the mechanotransduction of hemodynamic forces and that the GCX is regulated by MMP activity in regions of WSSGs.

Blood flow can signal during angiogenesis not only through mechanotransduction, but also by affecting growth factor distribution.

Growth factors, such as VEGF, promote the sprouting of new blood vessels. Growth factors are generally produced far from the endothelium, and the transport of these proteins is often assumed to occur through diffusion. When sprouting occurs in a perfused vascular bed, however, interstitial flow is present that can modify protein transport. We recently developed a technique to analyze flow dynamics and vascular remodeling simultaneously in avian embryos. In this study, we extend our technique to model interstitial flow through the porous matrix of the mesenchymal tissue and use this to investigate how flow in the blood vessels affects the distribution of growth factors in the mesenchyme, using VEGF as a prototypical angiogenic molecule. We find that flow controls sprouting location and elongation, both through the direct action of mechanical force and through indirect effects on growth factor distribution. Most importantly, we find that the distribution of VEGF is regulated by interstitial flow, and the effect of diffusion of VEGF is negligible.