RESUMEN
The accurate detection and identification of volatile aromatic hydrocarbons, which are highly toxic pollutants, are essential for assessing indoor and outdoor air qualities and protecting humans from their sources. However, real-time and on-site monitoring of aromatic hydrocarbons has been limited by insufficient sensor selectivity. Addressing the issue, bilayer oxide chemiresistors are developed using Rh-SnO2 gas-sensing films and catalytic CeO2 overlayers for rapidly and cost-effectively detecting traces of aromatic hydrocarbons in a highly discriminative and quantitative manner, even in gas mixtures. The sensing mechanism underlying the exceptional performance of bilayer sensor is systematically elucidated in relation to oxidative filtering of interferants by the CeO2 overlayer. Moreover, CeO2-induced selective detection is validated using SnO2, Pt-SnO2, Au-SnO2, In2O3, Rh-In2O3, Au-In2O3, WO3, and ZnO sensors. Furthermore, sensor arrays are employed to enable pattern recognition capable of discriminating between aromatic gases and non-aromatic interferants and quantifying volatile aromatic hydrocarbon classifications.
RESUMEN
Real-time breath isoprene sensing provides noninvasive methods for monitoring human metabolism and early diagnosis of cardiovascular diseases. Nonetheless, the stable alkene structure and high humidity of the breath hinder sensitive and selective isoprene detection. In this work, we derived well-defined Co3O4@polyoxometalate yolk-shell structures using a metal-organic framework template. The inner space, including highly catalytic Co3O4 yolks surrounded by a semipermeable polyoxometalate shell, enables stable isoprene to be reformed to reactive intermediate species by increasing the gas residence time and the reaction with the inner catalyst. This sensor exhibited selective isoprene detection with an extremely high chemiresistive response (180.6) and low detection limit (0.58 ppb). The high sensing performance can be attributed to electronic sensitization and catalytic promotion effects. In addition, the reforming reaction of isoprene is further confirmed by the proton transfer reaction-quadrupole mass spectrometry analysis. The practical feasibility of this sensor in smart healthcare applications is exhibited by monitoring muscle activity during the workout.
Asunto(s)
Nanotecnología , Óxidos , Humanos , Pruebas Respiratorias/métodosRESUMEN
The sensing performances of gas sensors must be improved and diversified to enhance quality of life by ensuring health, safety, and convenience. Metal-organic frameworks (MOFs), which exhibit an extremely high surface area, abundant porosity, and unique surface chemistry, provide a promising framework for facilitating gas-sensor innovations. Enhanced understanding of conduction mechanisms of MOFs has facilitated their use as gas-sensing materials, and various types of MOFs have been developed by examining the compositional and morphological dependences and implementing catalyst incorporation and light activation. Owing to their inherent separation and absorption properties and catalytic activity, MOFs are applied as molecular sieves, absorptive filtering layers, and heterogeneous catalysts. In addition, oxide- or carbon-based sensing materials with complex structures or catalytic composites can be derived by the appropriate post-treatment of MOFs. This review discusses the effective techniques to design optimal MOFs, in terms of computational screening and synthesis methods. Moreover, the mechanisms through which the distinctive functionalities of MOFs as sensing materials, heterostructures, and derivatives can be incorporated in gas-sensor applications are presented.
RESUMEN
Oxide chemiresistors have mostly been used to detect reactive gases such as ethanol, acetone, formaldehyde, nitric dioxide, and carbon monoxide. However, the selective and sensitive detection of volatile aromatic compounds such as benzene, toluene, and xylene, which are extremely toxic and harmful, using oxide chemiresistors remains challenging because of the molecular stability of benzene rings containing chemicals. Moreover, the performance of the sensing materials is insufficient to detect trace concentration levels of volatile aromatic compounds, which lead to harmful effects on human beings. Here, the strategies for designing highly selective and sensitive volatile aromatic compound gas sensors using oxide chemiresistors were suggested and reviewed. Key approaches include the use of thermal activation, design of sensing materials with high catalytic activity, the utilization of catalytic microreactors and bilayer structures with catalytic overlayer, and the pretreatment of analyte gases or post analysis of sensing signals. In addition, future perspectives from the viewpoint of designing sensing materials and sensor structures for high-performance and robust volatile aromatic compounds gas sensors are provided. Finally, we discuss possible applications of the sensors and sensor arrays.
Asunto(s)
Óxidos , Materiales Inteligentes , Benceno , Gases/química , Humanos , ToluenoRESUMEN
Precise detection of breath isoprene can provide valuable information for monitoring the physical and physiological status of human beings or for the early diagnosis of cardiovascular diseases. However, the extremely low concentration and low chemical reactivity of breath isoprene hamper the selective and sensitive detection of isoprene using oxide semiconductor chemiresistors. Herein, we report that macroporous WO3 microspheres whose inner macropores are surrounded by Au nanoparticles exhibit a high response (resistance ratio = 11.3) to 0.1 ppm isoprene under highly humid conditions at 275 °C and an extremely low detection limit (0.2 ppb). Furthermore, the sensor showed excellent selectivity to isoprene over five interferants that could be exhaled by humans. Notably, the selectivity to isoprene is critically dependent on the location of Au nanocatalysts and macroporosity. The mechanism underlying the selective isoprene detection is investigated in relation to the reforming of less reactive isoprene into more reactive intermediate species promoted by macroporous catalytic reactors, which is confirmed by the analysis using a proton transfer reaction quadrupole mass spectrometer. The sensor for breath analysis has high potential for simple physical and physiological monitoring as well as disease diagnosis.
Asunto(s)
Pruebas Respiratorias/métodos , Butadienos/análisis , Compuestos de Oro/química , Hemiterpenos/análisis , Nanopartículas del Metal/química , Óxidos/química , Tungsteno/química , Catálisis , Humanos , Espectrometría de Masas/métodos , Microesferas , Sensibilidad y Especificidad , TemperaturaRESUMEN
Solid oxide cells (SOCs) are promising sustainable and efficient electrochemical energy conversion devices. The application of a bilayer electrolyte comprising wide electrolytic oxide and highly conductive oxide is essential to lower the operating temperatures while maintaining high performance. However, a structurally and chemically ideal bilayer has been unattainable through cost-effective conventional ceramic processes. Here, we describe a strategy of naturally diffused sintering aid allowing the fabrication of defect-free doped-zirconia/doped-ceria bilayer electrolyte with full density and reduced interdiffusion layer at lower sintering temperature owing to the supply of small but appropriate amount of sintering aid from doped zirconia to doped ceria that makes the thermal shrinkages of both layers perfectly congruent. The resulting SOCs exhibit a minimal ohmic loss of 0.09 ohm cm2 and remarkable performances in both fuel cell (power density exceeding 1.3 W cm−2) and electrolysis (current density of −1.27 A cm−2 at 1.3 V) operations at 700°C.
RESUMEN
Metal-organic frameworks (MOFs) with high surface area, tunable porosity, and diverse structures are promising platforms for chemiresistors; however, they often exhibit low sensitivity, poor selectivity, and irreversibility in gas sensing, hindering their practical applications. Herein, we report that hybrids of Cu3(HHTP)2 (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) nanoflakes and Fe2O3 nanoparticles exhibit highly sensitive, selective, and reversible detection of NO2 at 20 °C. The key parameters to determine their response, selectivity, and recovery are discussed in terms of the size of the Cu3(HHTP)2 nanoflakes, the interaction between the MOFs and NO2, and an increase in the concentration and lifetime of holes facilitated by visible-light photoactivation and charge-separating energy band alignment of the hybrids. These photoactivated MOF-oxide hybrids suggest a new strategy for designing high-performance MOF-based gas sensors.
RESUMEN
Formaldehyde, a probable carcinogen, is a ubiquitous indoor pollutant, but its highly selective detection has been a long-standing challenge. Herein, a chemiresistive sensor that can detect ppb-level formaldehyde in an exclusive manner at room temperature is designed. The TiO2 sensor exhibits under UV illumination highly selective detection of formaldehyde and ethanol with negligible cross-responses to other indoor pollutants. The coating of a mixed matrix membrane (MMM) composed of zeolitic imidazole framework (ZIF-7) nanoparticles and polymers on TiO2 sensing films removed ethanol interference completely by molecular sieving, enabling an ultrahigh selectivity (response ratio > 50) and response (resistance ratio > 1,100) to 5 ppm formaldehyde at room temperature. Furthermore, a monolithic and flexible sensor is fabricated successfully using a TiO2 film sandwiched between a flexible polyethylene terephthalate substrate and MMM overlayer. Our work provides a strategy to achieve exclusive selectivity and high response to formaldehyde, demonstrating the promising potential of flexible gas sensors for indoor air monitoring.
RESUMEN
Nanotransfer printing (nTP) has attracted much attention due to its high pattern resolution, simple process, and low processing cost for useful nanofabrication. Here, we introduce a thermally assisted nTP (T-nTP) process for the effective fabrication of various periodic three-dimensional (3D) nanosheets, such as concavo-convex lines, spine lines, square domes, and complex multi-line patterns. The T-nTP method allows continuous nanoscale 3D patterns with functionality to be transferred onto both rigid and flexible substrates by heat without any collapse of uniform convex nanostructures with nanochannels. We also show the pattern formation of multi-layered hybrid structures consisting of two or more materials by T-nTP. Furthermore, the formation of silicon oxide nanodots (0D) within a printed metallic nanowave structure (3D) can be achieved by the combined method of T-nTP and the self-assembly of poly(styrene-b-dimethylsiloxane) (PS-b-PDMS) block copolymers. Moreover, we demonstrate how to obtain well-defined oxide-metal hybrid nanostructures (0D-in-3D) through the spontaneous accommodation of PDMS spheres in the confined spaces of an Au-wave nanotemplate. This approach is applicable during the nanofabrication of various high-resolution devices with complex geometrical nanopatterns.
RESUMEN
The highly selective detection of trace gases using transparent sensors at room temperature remains challenging. Herein, transparent nanopatterned chemiresistors composed of aligned 1D Au-SnO2 nanofibers, which can detect toxic NO2 gas at room temperature under visible light illumination is reported. Ten straight Au-SnO2 nanofibers are patterned on a glass substrate with transparent electrodes assisted by direct-write, near-field electrospinning, whose extremely low coverage of sensing materials (≈0.3%) lead to the high transparency (≈93%) of the sensor. The sensor exhibits a highly selective, sensitive, and reproducible response to sub-ppm levels of NO2 , and its detection limit is as low as 6 ppb. The unique room-temperature NO2 sensing under visible light emanates from the localized surface plasmonic resonance effect of Au nanoparticles, thereby enabling the design of new transparent oxide-based gas sensors without external heaters or light sources. The patterning of nanofibers with extremely low coverage provides a general strategy to design diverse compositions of gas sensors, which can facilitate the development of a wide range of new applications in transparent electronics and smart windows wirelessly connected to the Internet of Things.
RESUMEN
Volatile aromatic compounds are major air pollutants, and their health impacts should be assessed accurately based on the concentration and composition of gas mixtures. Herein, novel bilayer sensors consisting of a SnO2 sensing layer and three different xRh-TiO2 catalytic overlayers (x = 0.5, 1, and 2 wt%) are designed for the new functionalities such as the selective detection, discrimination, and analysis of benzene, toluene, and p-xylene. The 2Rh-TiO2/SnO2 bilayer sensor shows a high selectivity and response toward ppm- and sub-ppm-levels of benzene over a wide range of sensing temperatures (325-425 °C). An array of 0.5Rh-, 1Rh-, and 2Rh-TiO2/SnO2 sensors exhibits discrimination and composition analyses of aromatic compounds. The conversion of gases into more active species at moderate catalytic activation and the complete oxidation of gases into non-reactive forms by excessive catalytic promotion are proposed as the reasons behind the enhancement and suppression of analyte gases, respectively. Analysis using proton transfer reaction-quadrupole mass spectrometer (PTR-QMS) is performed to verify the above proposals. Although the sensing characteristics exhibit mild moisture interference, bilayer sensors with systematic and tailored control of gas selectivity and response provide new pathways for monitoring aromatic air pollutants and evaluating their health impacts.
RESUMEN
2D materials, such as graphene, exhibit great potential as functional materials for numerous novel applications due to their excellent properties. The grafting of conventional micropatterning techniques on new types of electronic devices is required to fully utilize the unique nature of graphene. However, the conventional lithography and polymer-supported transfer methods often induce the contamination and damage of the graphene surface due to polymer residues and harsh wet-transfer conditions. Herein, a novel strategy to obtain micropatterned graphene on polymer substrates using a direct curing process is demonstrated. Employing this method, entirely flexible, transparent, well-defined self-activated graphene sensor arrays, capable of gas discrimination without external heating, are fabricated on 4 in. wafer-scale substrates. Finite element method simulations show the potential of this patterning technique to maximize the performance of the sensor devices when the active channels of the 2D material are suspended and nanoscaled. This study contributes considerably to the development of flexible functional electronic devices based on 2D materials.
RESUMEN
Catalyst-loaded hollow spheres are effective at detecting ethanol with high chemical reactivity. However, this has limited the widespread use of catalyst-loaded hollow spheres in designing highly selective gas sensors to less-reactive gases such as aromatics (e.g., xylene). Herein, we report the preparation of xylene-selective Au-SnO2 nanoreactors by loading Au nanoclusters on the inner surface of SnO2 hollow shells using the layer-by-layer assembly technique. The results revealed that the sensor based on SnO2 hollow spheres loaded with Au nanoclusters on the inner surface exhibited unprecedentedly high xylene selectivity and an ultrahigh xylene response, high enough to be used for indoor air quality monitoring, whereas the sensor based on SnO2 hollow spheres loaded with Au nanoclusters on the outer surface exhibited the typical ethanol-sensitive sensing behaviors as frequently reported in the literature. In addition, the xylene selectivity and response were optimized when the hollow shell was sufficiently thin (â¼25 nm) and semipermeable (pore size = â¼3.5 nm), while the selectivity and response decreased when the shell was thick or highly gas permeable with large mesopores (â¼30 nm). Accordingly, the underlying mechanism responsible for the unprecedentedly high xylene sensing performance is discussed in relation to the configuration of the loaded Au nanoclusters and the morphological characteristics including shell thickness and pore size distribution. This novel nanoreactor concept can be widely used to design highly selective gas sensors especially to less-reactive gases such as aromatics, aldehydes, and ketones.
RESUMEN
Sulfide solid electrolytes (SEs) with high Li-ion conductivities (σion) and soft mechanical properties have limited applications in wet casting processes for commercial all-solid-state batteries (ASSBs) because of their inherent atmospheric and chemical instabilities. In this study, we fabricated sulfide SEs with a novel core-shell structure via environmental mechanical alloying, while providing sufficient control of the partial pressure of oxygen. This powder possesses notable atmospheric stability and chemical resistance because it is covered with a stable oxysulfide nanolayer that prevents deterioration of the bulk region. The core-shell SEs showed a σion of more than 2.50 mS cm-1 after air exposure (for 30 min) and reaction with slurry chemicals (mixing and drying for 31 min), which was approximately 82.8% of the initial σion. The ASSB cell fabricated through wet casting provided an initial discharge capacity of 125.6 mAh g-1. The core-shell SEs thus exhibited improved powder stability and reliability in the presence of chemicals used in various wet casting processes for commercial ASSBs.
RESUMEN
Artificial olfaction based on gas sensor arrays aims to substitute for, support, and surpass human olfaction. Like mammalian olfaction, a larger number of sensors and more signal processing are crucial for strengthening artificial olfaction. Due to rapid progress in computing capabilities and machine-learning algorithms, on-demand high-performance artificial olfaction that can eclipse human olfaction becomes inevitable once diverse and versatile gas sensing materials are provided. Here, rational strategies to design a myriad of different semiconductor-based chemiresistors and to grow gas sensing libraries enough to identify a wide range of odors and gases are reviewed, discussed, and suggested. Key approaches include the use of p-type oxide semiconductors, multinary perovskite and spinel oxides, carbon-based materials, metal chalcogenides, their heterostructures, as well as heterocomposites as distinctive sensing materials, the utilization of bilayer sensor design, the design of robust sensing materials, and the high-throughput screening of sensing materials. In addition, the state-of-the-art and key issues in the implementation of electronic noses are discussed. Finally, a perspective on chemiresistive sensing materials for next-generation artificial olfaction is provided.
Asunto(s)
Nariz Electrónica , Semiconductores , Gases/químicaRESUMEN
Graphene-based electronic textile (e-textile) gas sensors have been developed for detecting hazardous NO2 gas. For the e-textile gas sensor, electrical conductivity is a critical factor because it directly affects its sensitivity. To obtain a highly conductive e-textile, biomolecules have been used for gluing the graphene to the textile surface, though there remain areas to improve, such as poor conductivity and flexibility. Herein, we have developed a dopamine-graphene hybrid electronic textile yarn (DGY) where the dopamine is used as a bio-inspired adhesive to attach graphene to the surface of yarns. The DGY shows improved electrical conductivity (â¼40 times) compared to conventional graphene-based e-textile yarns with no glue. Moreover, it exhibited improved sensing performance in terms of short response time (â¼2 min), high sensitivity (0.02 µA/ppm), and selectivity toward NO2. The mechanical flexibility and durability of the DGY were examined through a 1000-cycle bending test. For a practical application, the DGY was attempted to detect the NOx emitted from vehicles, including gasoline, diesel, and fuel cell electric vehicles. Our results demonstrated that the DGYs-as a graphene-based e-textile gas sensor for detecting NO2-are simple to fabricate, cheap, disposable, and mechanically stable.
RESUMEN
Nanotransfer printing (nTP) has attracted considerable attention due to its good pattern resolution, process simplicity, and cost-effectiveness. However, the development of a large-area nTP process has been hampered by critical reliability issues related to the uniform replication and regular transfer printing of functional nanomaterials. Here, we present a very practical thermally assisted nanotransfer printing (T-nTP) process that can easily produce well-ordered nanostructures on an 8-inch wafer via the use of a heat-rolling press system that provides both uniform pressure and heat. We also demonstrate various complex pattern geometries, such as wave, square, nut, zigzag, and elliptical nanostructures, on diverse substrates via T-nTP. Furthermore, we demonstrate how to obtain a high-density crossbar metal-insulator-metal memristive array using a combined method of T-nTP and directed self-assembly. We expect that the state-of-the-art T-nTP process presented here combined with other emerging patterning techniques will be especially useful for the large-area nanofabrication of various devices.
RESUMEN
Potassium-ion batteries (KIBs) are considered as promising alternatives to lithium-ion batteries owing to the abundance and affordability of potassium. However, the development of suitable electrode materials that can stably store large-sized K ions remains a challenge. This study proposes a facile impregnation method for synthesizing ultrafine cobalt-iron bimetallic selenides embedded in hollow mesoporous carbon nanospheres (HMCSs) as superior anodes for KIBs. This involves loading metal precursors into HMCS templates using a repeated "drop and drying" process followed by selenization at various temperatures, facilitating not only the preparation of bimetallic selenide/carbon composites but also controlling their structures. HMCSs serve as structural skeletons, conductive templates, and vehicles to restrain the overgrowth of bimetallic selenide particles during thermal treatment. Various analysis strategies are employed to investigate the charge-discharge mechanism of the new bimetallic selenide anodes. This unique-structured composite exhibits a high discharge capacity (485 mA h g-1 at 0.1 A g-1 after 200 cycles) and enhanced rate capability (272 mA h g-1 at 2.0 A g-1 ) as a promising anode material for KIBs. Furthermore, the electrochemical properties of various nanostructures, from hollow to frog egg-like structures, obtained by adjusting the selenization temperature, are compared.
RESUMEN
A highly selective and sensitive detection of the plant hormone ethylene, particularly at low concentrations, is essential for controlling the growth, development, and senescence of plants, as well as for ripening of fruits. However, this remains challenging because of the non-polarity and low reactivity of ethylene. Herein, a strategy for detecting ethylene at a sub-ppm-level is proposed by using oxide semiconductor chemiresistors with a nanoscale oxide catalytic overlayer. The SnO2 sensor coated with the nanoscale catalytic Cr2O3 overlayer exhibits rapid sensing kinetics, good stability, and an unprecedentedly high ethylene selectivity with exceptional gas response (R a/R g - 1, where R a represents the resistance in air and R g represents the resistance in gas) of 16.8 at an ethylene concentration of 2.5 ppm at 350 °C. The sensing mechanism underlying the ultraselective and highly sensitive ethylene detection in the unique bilayer sensor is systematically investigated with regard to the location, configuration, and thickness of the catalytic Cr2O3 overlayer. The mechanism involves the effective catalytic oxidation of interfering gases into less- or non-reactive species, without limiting the analyte gas transport. The sensor exhibits a promising potential for achieving a precise quantitative assessment of the ripening of five different fruits.
RESUMEN
Although several crystalline materials have been developed as Li-ion conductors for use as solid electrolytes in all-solid-state batteries (ASSBs), producing materials with high Li-ion conductivities is time-consuming and cost-intensive. Herein, we introduce a superionic halogen-rich Li-argyrodite (HRLA) and demonstrate its innovative synthesis using ultimate-energy mechanical alloying (UMA) and rapid thermal annealing (RTA). UMA with a 49 G-force milling energy provides a one-pot process that includes mixing, glassification, and crystallization, to produce as-milled HRLA powder that is â¼70% crystallized; subsequent RTA using an infrared lamp increases this crystallinity to â¼82% within 25 min. Surprisingly, this HRLA exhibits the highest Li-ion conductivity among Li-argyrodites (10.2 mS cm-1 at 25 °C, cold-pressed powder compact) reported so far. Furthermore, we confirm that this superionic HRLA works well as a promising solid electrolyte without a decreased intrinsic electrochemical window in various electrode configurations and delivers impressive cell performance (114.2 mAh g-1 at 0.5 C).