In vitro antifungal and physicochemical properties of polymerized acrylic resin containing strontium-modified phosphate-based glass.

Acrylic resins are widely used as the main components in removable orthodontic appliances. However, poor oral hygiene and maintenance of orthodontic appliances provide a suitable environment for the growth of pathogenic microorganisms. In this study, strontium-modified phosphate-based glass (Sr-PBG) was added to orthodontic acrylic resin at 0% (control), 3.75%, 7.5%, and 15% by weight to evaluate the surface and physicochemical properties of the novel material and its in vitro antifungal effect against Candida albicans (C. albicans). Surface microhardness and contact angle did not vary between the control and 3.75% Sr-PBG groups (p > 0.05), and the flexural strength was lower in the experimental groups than in the control group (p < 0.05), but no difference was found with Sr-PBG content (p > 0.05). All experimental groups showed an antifungal effect at 24 and 48 h compared to that in the control group (p < 0.05). This study demonstrated that 3.75% Sr-PBG exhibits antifungal effects against C. albicans along with suitable physicochemical properties, which may help to minimize the risk of adverse effects associated with harmful microbial living on removable orthodontic appliances and promote the use of various materials.

Difference in Baseline Antimicrobial Prescription Patterns of Hospitals According to Participation in the National Antimicrobial Monitoring and Feedback System in Korea.

This study aimed to evaluate the differences in the baseline characteristics and patterns of antibiotic usage among hospitals based on their participation in the Korea National Antimicrobial Use Analysis System (KONAS). We obtained claims data from the National Health Insurance for inpatients admitted to all secondary- and tertiary-care hospitals between January 2020 and December 2021 in Korea. 15.9% (58/395) of hospitals were KONAS participants, among which the proportion of hospitals with > 900 beds (31.0% vs. 2.6%, P < 0.001) and tertiary care (50.0% vs. 5.2%, P < 0.001) was higher than that among non-participants. The consumption of antibiotics targeting antimicrobial-resistant gram positive bacteria (33.7 vs. 27.1 days of therapy [DOT]/1,000 patient-days, P = 0.019) and antibiotics predominantly used for resistant gram-negative bacteria (4.8 vs. 3.7 DOT/1,000 patient-days, P = 0.034) was higher in KONAS-participating versus -non-participating hospitals. The current KONAS data do not fully represent all secondary- and tertiary-care hospitals in Korea; thus, the KONAS results should be interpreted with caution.

The ICL1 and MLS1 Genes, Integral to the Glyoxylate Cycle, are Essential and Specific for Caloric Restriction-Mediated Extension of Lifespan in Budding Yeast.

The regulation of complex energy metabolism is intricately linked to cellular energy demands. Caloric restriction (CR) plays a pivotal role in modulating the expression of genes associated with key metabolic pathways, including glycolysis, the tricarboxylic acid (TCA) cycle, and the glyoxylate cycle. In this study, the chronological lifespan (CLS) of 35 viable single-gene deletion mutants under both non-restricted and CR conditions, focusing on genes related to these metabolic pathways is evaluated. CR is found to increase CLS predominantly in mutants associated with the glycolysis and TCA cycle. However, this beneficial effect of CR is not observed in mutants of the glyoxylate cycle, particularly those lacking genes for critical enzymes like isocitrate lyase 1 (icl1Δ) and malate synthase 1 (mls1Δ). This analysis revealed an increase in isocitrate lyase activity, a key enzyme of the glyoxylate cycle, under CR, unlike the activity of isocitrate dehydrogenase, which remains unchanged and is specific to the TCA cycle. Interestingly, rapamycin, a compound known for extending lifespan, does not increase the activity of the glyoxylate cycle enzyme. This suggests that CR affects lifespan through a distinct metabolic mechanism.

Near-strain-free anode architecture enabled by interfacial diffusion creep for initial-anode-free quasi-solid-state batteries.

Anode-free (or lithium-metal-free) batteries with garnet-type solid-state electrolytes are considered a promising path in the development of safe and high-energy-density batteries. However, their practical implementation has been hindered by the internal strain that arises from the repeated plating and stripping of lithium metal at the interlayer between the solid electrolyte and negative electrode. Herein, we utilize the titanium nitrate nanotube architecture and a silver-carbon interlayer to mitigate the anisotropic stress caused by the recurring formation of lithium deposition layers during the cycling process. The mixed ionic-electronic conducting nature of the titanium nitrate nanotubes effectively accommodates the entry of reduced Li into its free volume space via interfacial diffusion creep, achieving near-strain-free operation with nearly tenfold volume suppressing capability compared to a conventional Cu anode counterpart during the lithiation process. Notably, the fabricated Li6.4La3Zr1.7Ta0.3O12 (LLZTO)-based initial-anode-free quasi-solid-state battery full cell, coupled with an ionic liquid catholyte infused high voltage LiNi0.33Co0.33Mn0.33O2-based cathode with an areal capacity of 3.2 mA cm-2, exhibits remarkable room temperature (25 °C) cyclability of over 600 cycles at 1 mA cm-2 with an average coulombic efficiency of 99.8%.

Combined effect of electrical energy and graphene oxide on Enterococcus faecalis biofilms.

This study aimed to investigate the effects of electrical energy and its synergistic activity with graphene oxide (GO) in Enterococcus faecalis (E. faecalis) biofilms. The viability of E. faecalis biofilms was analyzed by colony-forming units, crystal violet staining, and confocal laser scanning microscopy. The morphologies of the biofilms and the bacterial organelles were observed by scanning electron microscopy and transmission emission microscopy (TEM), respectively. Application of electrical energy combined with 0.2% sodium hypochlorite (NaOCl) on E. faecalis in biofilms significantly decreased the bacterial viability and biofilm biomass compared to the 0.2% NaOCl-only-treated group. Furthermore, additional application of GO showed similar antibacterial effects to 0.5% NaOCl. Notably, TEM observation revealed that the bacteria treated with electric energy and GO showed damaged cell membranes. The results suggest that combination of electrical energy and GO enhances antibacterial activity of NaOCl and has the potential to be applied to root canal irrigation protocols.

Mechanical properties and sustainable bacterial resistance effect of strontium-modified phosphate-based glass microfiller in dental composite resins.

Dental composite resins are widely used in dental restorations. However, their clinical application is limited by the occurrence of secondary caries. Strontium-modified phosphate-based glass (Sr-PBG) is a material known to have a sustainable bacterial resistance effect. The mechanical properties (in particular, flexural strength, modulus of elasticity, and hardness) of dental materials determine their function. Therefore, this study aimed to investigate the mechanical and ion-releasing properties as well as the sustainable bacterial resistance effect of bioactive resin composites containing Sr-PBG. The data were analyzed by ANOVA and Tuckey's tests (p < 0.05). We incorporated a Sr-PBG microfiller at 3, 6, and 9 wt.% concentrations into a commercially available composite resin and investigated the mechanical properties (flexural strength, elastic modulus, and micro hardness), ion release characteristics, and color of the resultant resins. In addition, we examined the antibacterial effects of the composite resins against Streptococcus mutans (S. mutans). The mechanical properties of the Sr-PBG groups differed only slightly from those of the control group (p > 0.05). However, the optical density at 600 nm of S. mutans incubated on the experimental group was significantly lower compared to that observed with the control (p < 0.05) both before and after thermocycling between 5 and 55 â„ƒ for 850 cycles (dwell time: 45 s). Therefore, strontium-modified resin materials exhibited a sustainable bacterial resistance effect in vitro while maintaining some of the mechanical properties of ordinary acrylic resins.

A novel orthodontic adhesive containing zinc-doped phosphate-based glass for preventing white spot lesions.

OBJECTIVES: This study aimed at demonstrating the remineralization effect of the enamel around the brackets to aid reduction in white spot lesions (WSLs) with use of zinc-doped phosphate-based glass (Zn-PBG) containing orthodontic adhesives. METHODS: Zn-PBG powder was synthesized, and particle morphology, size, and density were evaluated. Orthodontic adhesives with increasing loading percentage of Zn-PBG powder were prepared: ZnPG3 (3 wt.%), ZnPG6 (6 wt.%), and ZnPG9 (9 wt.%). Brackets were bonded on the etched enamel surface and stored in distilled water (DW) for 1 h. Following, Shear bond strength (SBS) along with adhesive remnant index were analyzed. The release of calcium (Ca), phosphorus (P), and zinc (Zn) from adhesive specimens in DW was evaluated after 7, 15 and 30 days of immersion. The remineralization effect was confirmed by microhardness and surface morphology analysis with scanning electron microscopy. RESULTS: The SBS value was observed between 20 and 22 MPa on enamel surface. The concentration of Ca, P and Zn released in DW increased with loading percentage of Zn-PBG. The microhardness increased in the experimental groups after immersion in artificial saliva for 7 days. Apatite-like crystal formation was observed after 30 days in the ZnPG 9 group. CONCLUSIONS: The orthodontic adhesive containing Zn-PBG with an optimal SBS performance has an enamel remineralization effect, and therefore can aid in prevention of WSLs. CLINICAL SIGNIFICANCE: The orthodontic adhesive containing Zn-PBG is clinically advantageous as it can promote remineralization and resist the formation of WSLs that may occur during orthodontic therapy.

Effect of strontium substitution on functional activity of phosphate-based glass.

Phosphate-based glass (PBG) is a bioactive agent, composed of a glass network with phosphate as the primary component and can be substituted with various therapeutic ions for functional enhancement. Strontium (Sr) has been shown to stimulate osteogenic activity and inhibit pro-inflammatory responses. Despite this potential, there are limited studies that focus on the proportion of Sr substituted and its impact on the functional activity of resulting Sr-substituted PBG (PSr). In this study, focusing on the cellular biological response we synthesized and investigated the functional activity of PSr by characterizing its properties and comparing the effect of Sr substitution on cellular bioactivity. Moreover, we benchmarked the optimal composition against 45S5 bioactive glass (BG). Our results showed that PSr groups exhibited a glass structure and phosphate network like that of PBG. The release of Sr and P was most stable for PSr6, which showed favorable cell viability. Furthermore, PSr6 elicited excellent early osteogenic marker expression and inhibition of pro-inflammatory cytokine expression, which was significant compared to BG. In addition, compared to BG, PSr6 had markedly higher expression of osteopontin in immunocytochemistry, higher ALP expression in osteogenic media, and denser alizarin red staining in vitro. We also observed a comparable in vivo regenerative response in a 4-week rabbit calvaria defect model. Therefore, based on the results of this study, PSr6 could be identified as the functionally optimized composition with the potential to be applied as a valuable bioactive component of existing biomaterials used for bone regeneration.

Evaluation of Biomechanical Stability of Teeth Tissue According to Crown Materials: A Three-Dimensional Finite Element Analysis.

The biomechanical effects of dental tissue according to various dental crown materials were investigated using finite element analysis. Bone, prepared tooth, root canal, and periodontal ligament were modeled based on computed tomography. Depending on the characteristics of the crown material, it was classified into zirconia, hybrid ceramic, gold alloy, and acrylic resin. A loading force of 200 N was applied in the vertical direction to the occlusal surface of the crown, and analysis was performed under the condition that all interfaces were tied. The results demonstrate that the highest von Mises stress was shown in the prepared tooth of the acrylic resin model, which is a temporary prosthesis, and the pulpal pressure was also the highest. Additionally, among the final prosthesis, the highest stress was shown in the hybrid ceramic model prepared teeth. The properties of restoration materials can be a factor influencing the tooth structure. Thus, in order to make a correct decision when selecting a material for restorative treatment, it is necessary to understand, analyze, and evaluate the properties of these restoration materials.

Sirt6 Activation Ameliorates Inflammatory Bone Loss in Ligature-Induced Periodontitis in Mice.

Periodontitis is an inflammatory disease caused by microorganisms that induce the destruction of periodontal tissue. Inflamed and damaged tissue produces various inflammatory cytokines, which activate osteoclasts and induce alveolar bone loss and, eventually, tooth loss. Sirt6 expression suppresses inflammation and bone resorption; however, its role in periodontitis remains unclear. We hypothesized that Sirt6 has a protective role in periodontitis. To understand the role of Sirt6 in periodontitis, we compared periodontitis with ligature placement around the maxillary left second molar in 8-week-old control (C57BL/6J) male mice to Sirt6-overexpressing Tg (Sirt6Tg) mice, and we observed the resulting phenotypes using micro-CT. MDL801, a Sirt6 activator, was used as a therapy for periodontitis through oral gavage. Pro-inflammatory cytokines and increased osteoclast numbers were observed in alveolar bone tissue under periodontitis surgery. In the same condition, interestingly, protein levels from Sirt6 were the most downregulated among sirtuins in alveolar bone tissue. Based on micro-CT and CEJ-ABC distance, Sirt6Tg was observed to resist bone loss against ligature-induced periodontitis. Furthermore, the number of osteoclasts was significantly reduced in Sirt6Tg-ligated mice compared with control-ligated mice, although systemic inflammatory cytokines did not change. Consistent with this observation, we confirmed that bone loss was significantly reduced when MDL801, a Sirt6 activator, was included in the ligation mouse model. Our findings demonstrate that Sirt6 activation prevents bone loss against ligature-induced periodontitis. Thus, a Sirt6 activator may provide a new therapeutic approach for periodontitis.

Surface engineering of inorganic solid-state electrolytes via interlayers strategy for developing long-cycling quasi-all-solid-state lithium batteries.

Lithium metal batteries (LMBs) with inorganic solid-state electrolytes are considered promising secondary battery systems because of their higher energy content than their Li-ion counterpart. However, the LMB performance remains unsatisfactory for commercialization, primarily owing to the inability of the inorganic solid-state electrolytes to hinder lithium dendrite propagation. Here, using an Ag-coated Li6.4La3Zr1.7Ta0.3O12 (LLZTO) inorganic solid electrolyte in combination with a silver-carbon interlayer, we demonstrate the production of stable interfacially engineered lab-scale LMBs. Via experimental measurements and computational modelling, we prove that the interlayers strategy effectively regulates lithium stripping/plating and prevents dendrite penetration in the solid-state electrolyte pellet. By coupling the surface-engineered LLZTO with a lithium metal negative electrode, a high-voltage positive electrode with an ionic liquid-based liquid electrolyte solution in pouch cell configuration, we report 800 cycles at 1.6 mA/cm2 and 25 °C without applying external pressure. This cell enables an initial discharge capacity of about 3 mAh/cm2 and a discharge capacity retention of about 85%.

Poly (Methyl Methacrylate)-Containing Silver-Phosphate Glass Exhibits Potent Antimicrobial Activity without Deteriorating the Mechanical and Biological Properties of Dental Prostheses.

Poly (methyl methacrylate) (PMMA) is a commonly used denture material with poor antimicrobial effects. This study investigated the antimicrobial effects of PMMA-containing silver-phosphate glass. We fabricated a novel material comprising PMMA-containing silver-phosphate glass. Then, microhardness, flexural strength, and gloss unit were analyzed. Antimicrobial activity against Streptococcus mutans and Candida albicans was investigated. Colony-forming units were counted, and antimicrobial rates were measured. Biocompatibility tests were performed using a colorimetric MTT assay for evaluating cell metabolic activity. The microhardness, flexural strength, and gloss unit of the experimental groups (with silver-phosphate glass) were not significantly different from those of the control group (no silver-phosphate glass) (P > 0.05), which showed clinically valid values. With increasing proportions of silver-phosphate glass, the antimicrobial activity against the two microorganisms increased (P < 0.05). Furthermore, S. mutans showed more than 50% antimicrobial activity in 4%, 6%, and 8% experimental groups, C. albicans showed more than 50% antimicrobial activity in 6% and 8% groups, and a statistically significant difference in antimicrobial activity was observed compared to the control (P < 0.05). The cell viability of the experimental groups was not significantly different from that of the control group (P > 0.05). Both control and experimental groups showed approximately 100% cell viability. These results suggest that silver-phosphate glass is a promising antimicrobial material in dentistry.

Zinc-modified phosphate-based glass micro-filler improves Candida albicans resistance of auto-polymerized acrylic resin without altering mechanical performance.

Colonization of auto-polymerized acrylic resin by pathogenic Candida albicans is a common problem for denture users. In this study, zinc-modified phosphate-based glass was introduced into an auto-polymerized acrylic resin at concentrations of 3, 5, and 7 wt.%. The mechanical or physical properties (flexural strength, elastic modulus, microhardness, and contact angle), surface morphology of the resultant materials, and the antimicrobial effect on C. albicans were investigated. There were no statistical differences in the mechanical properties between the control and the zinc-modified phosphate-based glass samples (p > 0.05); however, the number of C. albicans colony-forming units was significantly lower in the control group (p < 0.05). Scanning electron microscopy revealed that C. albicans tended not to adhere to the zinc-modified-phosphate-based glass samples. Thus, the zinc-modified materials retained the advantageous mechanical properties of unaltered acrylic resins, while simultaneously exhibiting a strong antimicrobial effect in vitro.

Use of the Monoclonal Antibody Regdanvimab to Treat Patients Hospitalized with COVID-19: Real-World Data during the Delta Variant Predominance.

Regdanvimab is the only monoclonal antibody available in Korea that targets severe acute respiratory syndrome coronavirus 2. We retrospectively evaluated the clinical characteristics of 374 adults hospitalized with coronavirus disease 2019 (COVID-19) who were treated with regdanvimab from September through December 2021. In total, 322 (86.1%) patients exhibited risk factors for disease progression. Most patients (91.4%) improved without additional treatment. No patient died or was transferred to intensive care. This study shows that regdanvimab prevented disease progression in high-risk patients with mild to moderate COVID-19 infections during Delta variant predominance.

Assessment of Zinc-Bound Phosphate-Based Glass-Coated Denture-Relining Material with Antifungal Efficacy for Inhibiting Denture Stomatitis.

This study investigated the surface properties, biocompatibility, and antifungal activity against Candida albicans of a denture-relining material coated with zinc-bound phosphate-based glass. First, zinc-bound phosphate-based glass was fabricated. A polymerized denture-relining disk was coated with zinc-bound phosphate-based glass (2%, 4%, and 6%). The surface properties of the control and experimental groups were measured, including the wettability, microhardness, color difference, and gloss. The biocompatibility was evaluated using the MTT assay according to ISO 10993-5. The antifungal activity was investigated by counting the number of colony-forming units of Candida albicans. The results were analyzed using a one-way ANOVA and Tukey's test (p = 0.05). The results of this study indicate that, despite the antimicrobial effect of zinc-bound phosphate-based glass, a coated denture-relining material does not degrade the surface properties and biocompatibility. Therefore, this novel material is considered promising for use as a dental material with antimicrobial properties that can potentially prevent denture stomatitis.

Appropriateness of antibiotic prescriptions during hospitalization and ambulatory care: a multicentre prevalence survey in Korea.

OBJECTIVES: Antimicrobial resistance is one of the most urgent global health threats. The need for the qualitative evaluation of antibiotic use at the national level is increasing. To identify areas for improvement, we aimed to assess the prevalence and appropriateness of antibiotic prescriptions during hospitalization and ambulatory care in Korea. METHODS: The prevalence and appropriateness of antibiotic prescriptions on 29 August 2018 were assessed for 20 hospitals in Korea. Infectious disease specialists determined appropriateness. Except for antiviral and anti-tuberculosis agents, all antibacterial or antifungal agent prescriptions during hospitalization or ambulatory care were evaluated. RESULTS: The prevalence of antibiotic prescription was 14.1% (8,400/59 216 patients) on the study date. Antibiotics were prescribed for 50.8% of inpatients (6557/12 902), with two or more antibiotics prescribed for 27.4% (1798/6557) of patients. A total of 10 948 prescriptions (7999 therapeutic, 2105 surgical prophylaxes, and 844 medical prophylaxes) were included in the final analysis, and 27.7% of these were inappropriate. Surgical prophylaxis was inadequately prescribed most frequently (54.4%), followed by medical prophylaxis (29.5%) and therapeutic antibiotics (20.5%). The most common indications for therapeutic antibiotics were respiratory (29.1%, n=2332), gastrointestinal (22.4%, n=1791), and urinary tract infections (13.1%, n=1050). The most frequently prescribed antibiotics were cephalosporins (52.0%, n=5490), followed by beta lactam/beta lactamase inhibitors (13.7%, n=1373), fluoroquinolones (9.1%, n=957), and metronidazole (6.6%, n=699). CONCLUSION: This was the first nationwide qualitative antibiotic prescription adequacy evaluation in Korea. A significant proportion of antibiotic prescriptions were inappropriate. Therefore, interventions for high-frequency infections and prescription antibiotics are needed.

Role of Perceived Competence and Task Interest in Learning From Negative Feedback.

We used functional magnetic resonance imaging to examine the interactive effects of perceived competence and task interest on the cognitive and affective responses to negative feedback. Twenty-four undergraduates performed both interesting and uninteresting tasks and received failure feedback. The participants' perceived competence in the task was manipulated between subjects prior to scanning with bogus feedback. The results showed that negative feedback processing was contingent upon both perceived competence and task interest. The most adaptive coping mechanism, indicated by activation in the cognitive control network and attenuation in the negative affect region, was identified for the high-competence and high-interest combination. When either competence or interest was low, signals in the cognitive control network were weaker. The most detrimental activation patterns were observed for the combination of low-competence and high interest. Our results reveal the combination of task and learner characteristics that best harnesses the potential benefits of negative feedback and illustrate the neuroscientific mechanisms underlying this observation.

Prescriptions patterns and appropriateness of usage of antibiotics in non-teaching community hospitals in South Korea: a multicentre retrospective study.

BACKGROUND: Although non-teaching community hospitals form the majority of healthcare providers in South Korea, there is limited data on antibiotic usage in them. To evaluate the pattern of antibiotic usage and its appropriateness in hospitals with < 400 beds in South Korea. METHODS: A multicentre retrospective study was conducted in 10 hospitals (six long-term care hospitals, three acute care hospitals, and one orthopaedic hospital), with < 400 beds in South Korea. We analysed patterns of antibiotic prescription in 2019, and their appropriateness in the participating hospitals. For the evaluation of the appropriateness of the prescription, 25 patients under antibiotic therapy were randomly selected at each hospital, over two separate periods. Due to the heterogeneity of their characteristics, the orthopaedics hospital was excluded from the analysis. RESULTS: The most commonly prescribed antibiotics in long-term care hospitals was fluoroquinolone, followed by beta-lactam/beta-lactamase inhibitor (anti-pseudomonal). In acute care hospitals, these were third generation cephalosporin, followed by first generation cephalosporin, and second generation cephalosporin. The major antibiotics that were prescribed in the orthopedics hospital was first generation cephalosporin Only 2.3% of the antibiotics were administered inappropriately. In comparison, 15.3% of patients were prescribed an inappropriate dose. The proportion of inappropriate antibiotic prescriptions was 30.6% of the total antibiotic prescriptions. CONCLUSIONS: The antibiotic usage patterns vary between non-teaching community hospitals in South Korea. The proportion of inappropriate prescriptions exceeded 30% of the total antibiotic prescriptions.

CD4+/CD8+ Ratio and Growth Differentiation Factor 8 Levels in Peripheral Blood of Large Canine Males Are Useful Parameters to Build an Age Prediction Model.

PURPOSE: To build an age prediction model, we measured CD4+ and CD8+ cells, and humoral components in canine peripheral blood. MATERIALS AND METHODS: Large Belgian Malinois (BGM) and German Shepherd Dog (GSD) breeds (n=27), aged from 1 to 12 years, were used for this study. Peripheral bloods were obtained by venepuncture, then plasma and peripheral blood mononuclear cells (PBMCs) were separated immediately. Six myokines, including interleukin (IL)-6, IL-8, IL-15, leukemia inhibitory factor (LIF), growth differentiation factor 8 (GDF8), and GDF11 were measured from plasma and CD4+/CD8+ T-lymphocytes ratio were measured from PBMC. These parameters were then tested with age prediction models to find the best fit model. RESULTS: We found that the T-lymphocyte ratio (CD4+/CD8+) was significantly correlated with age (r=0.46, p=0.016). Among the six myokines, only GDF8 showed a significant correlation with age (r=0.52, p=0.005). Interestingly, these two markers showed better correlations in male dogs than females, and BGM breed than GSD. Using these two age biomarkers, we could obtain the best fit in a quadratic linear mixed model (r=0.77, p=3×10-6). CONCLUSIONS: Age prediction is a challenging task because of complication with biological age. Our quadratic linear mixed model using CD4+/CD8+ ratio and GDF8 level showed a meaningful age prediction.

The Correlation between YAP and RhoA Expression in Prostate and Ovarian Tumor Stroma.

BACKGROUND AND OBJECTIVE: Cancer associated fibroblasts (CAFs) are a mesenchymal cell type found in most solid tumors modulating cancer metastasis by building up and remodeling the extracellular matrix (ECM) structure. We aimed to evaluate the correlation between RhoA and YAP expression  in the stroma cells obtained from prostate and ovarian cancer tissues. METHODS: We analyzed two microarray datasets obtained from NCBI Gene Expression Omnibus(GEO). The sample type of two datasets was RNA, which is displaying the transcriptome profiling. The tumor stroma of patients with invasive prostate cancer and high-grade serous ovarian cancer were obtained from datasets Independent t-test was used to analyze the differentially expressed YAP between normal stroma and cancer stroma. In addition, Pearson's correlation was run to analyze the correlation between YAP and RhoA expressions. RESULTS: In comparison with normal stroma tissues, YAP1 was overexpressed in prostate and ovarian cancer stroma tissues (prostate cancer stroma, p <0.05; ovarian cancer stroma, p < 0.001). Furthermore, a positive correlation was detected between YAP and RhoA expressions in stroma of both tumor types. This correlation was positively strong in prostate cancer stroma (R=0.607) and positively weak in ovarian cancer stroma (R=0.248). CONCLUSION: We found that YAP was overexpressed in prostate and ovarian cancer stroma. Furthermore, the correlation between RhoA and YAP expression suggested that RhoA-YAP signals could physiologically be involved in tumor stroma. Thus, targeting RhoA-YAP may be an intriguing avenue for cancer therapeutics in neoplastic epithelial cells as well as tumor stroma.