RESUMEN
In this study, the effects of a hybrid filler composed of zero-dimensional spherical AlN particles and two-dimensional BN flakes on the thermal conductivity of epoxy resin were studied. The thermal conductivity (TC) of the pristine epoxy matrix (EP) was 0.22 W/(m K), while the composite showed the TC of 10.18 W/(m K) at the 75 wt% AlN-BN hybrid filler loading, which is approximately a 46-fold increase. Moreover, various essential application properties were examined, such as the viscosity, cooling rate, coefficient of thermal expansion (CTE), morphology, and electrical properties. In particular, the AlN-BN/EP composite showed higher thermal stability and lower CTE (22.56 ppm/°C) than pure epoxy. Overall, the demonstrated outstanding thermal performance is appropriate for the production of electronic packaging materials, including next-generation flip-chip underfills.
RESUMEN
In this study, a thermal conductivity of 0.22 W·m-1·K-1 was obtained for pristine epoxy (EP), and the impact of a hybrid filler composed of two-dimensional (2D) flake-like boron nitride (BN) and zero-dimensional (0D) spherical micro-sized aluminum oxide (Al2O3) on the thermal conductivity of epoxy resin was investigated. With 80 wt.% hybrid Al2O3-BN filler contents, the thermal conductivity of the EP composite reached 1.72 W·m-1·K-1, increasing approximately 7.8-fold with respect to the pure epoxy matrix. Furthermore, different important properties for the application were analyzed, such as Fourier-transform infrared (FTIR) spectra, viscosity, morphology, coefficient of thermal expansion (CTE), glass transition temperature (Tg), decomposition temperature (Td), dielectric properties, and thermal infrared images. The obtained thermal performance is suitable for specific electronic applications such as flip-chip underfill packaging.
RESUMEN
We have designed a class of highly hydrophobic dispersants for finely dispersing carbon black and organic pigment nanoparticles in apolar mediums. The synthesis involved the use of polyisobutylene-g-succinic anhydride (PIB-SA) and judiciously selected amines by amidation and imidation. The structures were characterized by infrared spectroscopy for anhydride functionalities in the starting materials and amide/imide linkages in the products. These polymeric forms of dispersants were structurally varied with respects to their PIB molecular weight, twin-tails, and linkages. Their relative performance for dispersing six different pigments in decane was evaluated against solution homogeneity, viscosity, stability, and particle size. The fine dispersion was achieved at particle sizes of ca. 100 nm, with the viscosity as low as 2-3 cP. The measurement of zeta potentials, which varied from -39.8 to -5.1 mV with pigment addition, revealed a strong surface-charge interaction between pigment and PIB dispersant molecules. Examination by TEM (transmission electronic microscope) showed the homogeneous dispersion of the primary structures of pigment particles at ca. 20 nm in diameter. The polymeric dispersants with different PIB tails and imide functionalities could be tailored for pigment stability in the oil phase, which is potentially suitable for the electrowetting devices.
RESUMEN
We report the first fabrication of pigment particle-based electrowetting display (EWD) by using the requisite poly(isobutylene)-imide (PIB-imide) for effectively dispersing insoluble colorant in decane/water system. The series of PIB-imide dispersants were prepared from the amidation/imidation of PIB-succinic anhydride with different hydrophobic lengths and a suitable amine. The structurally tailored dispersants by adopting the highly hydrophobic PIB tails allows the formation of homogeneous dispersion of nanosized pigment particles in decane and clearly separated from water. The pigment dispersion at particle size of ca. 100 nm and a low viscosity of 2-3 cps was obtained and fabricated into an EWD device which was operated at a driving voltage of 15-20 V in achieving a maximum aperture ratio of 80%. With the advantage of both fast response time and vivid color, the pigment-based EWD, as shown in the video, stands out as a promising new option for future transparent display and serves as a critical foundation for the next-generation advanced display applications.