RESUMEN
In this work, two asymmetric non-fullerene acceptors (NFAs), BTP-EHBO-4F and BTP-PHD-4F, are designed to be applied in green-solvent-processable organic photovoltaics (OPVs). BTP-EHBO-4F and BTP-PHD-4F show good solubilities in green solvent o-xylene. As a result, PM6:BTP-EHBO-4F-based devices exhibit outstanding photovoltaic performances using o-xylene as a solvent. By comparison, due to the poor solubility of Y6 in o-xylene, PM6:Y6-based devices show poor performances. Owing to the favorable phase separation, molecule packing, and orientation observed from atomic force microscopy (AFM) and grazing-incidence wide-angle X-ray scattering (GIWAXS) measurements, PM6:BTP-PHD-4F-based devices demonstrate a PCE of 15.91% with a VOC of 0.87 V, a JSC of 25.64 mA/cm2, and an FF of 71.34%. Moreover, PM6:BTP-EHBO-4F-based devices exhibit an impressive PCE of 16.82% with a VOC of 0.85 V, a JSC of 26.12 mA/cm2, and an FF of 75.78%, which is outstanding for OPVs using o-xylene as a solvent.
RESUMEN
A new synthetic method to grow O-deficient rutile TiO2(s) nanorods (NRs) and nanowires (NWs) by a vapor-solid reaction growth method is developed. TiCl4(g) was employed to react with commercially supplied CaTiO3(s) (size 2-4 µm) at 973 K under atmospheric pressure to generate TiO2(s) NRs (diameters 80-120 nm, lengths 1-4 µm). The reaction employing TiCl4(g) and CaO(s) at 973 K also generated CaTiO3(s) (size 4-13 µm) as the intermediate which reacted further with TiCl4(g) to produce NWs (diameters 80-120 nm, lengths 4-15 µm). This is the first report of 1D rutile TiO2(s) nanostructure with such a high aspect ratio. Both of the NRs and the NWs, with compositions TiO1.81 and TiO1.65, respectively, were single crystals grown in the [001] direction. Their morphology was affected by the reaction temperature, the concentration of TiCl4(g), and the particle size of CaTiO3(s). The NRs and the NWs were investigated as anode materials for Li+-ion batteries. At constant current rates 1, 2, and 5 C (1 C = 170 mA g-1) for 100 cycles, the cycling (1.0-3.0 V) performance data of the NRs were 146, 123, and 104 mA h g-1, respectively. On the other hand, the cycling performance data of the NWs were 120, 80, and 52 mA h g-1, respectively. This is attributed to the high Li+ ion diffusion rate (D Li+ ) of the NRs (29.52 × 10-15 cm2 s-1), which exceeds that of the NWs (8.61 × 10-15 cm2 s-1). Although the [001] growth direction of the NR crystals would provide the fastest channels for the diffusion of Li+ ions and enhance the battery capacity, the extremely long channels in the NWs could hamper the diffusion of the Li+ ions. The O-deficiency in the structure would increase the conductivity of the electrode material and improve the stable cycling stability of the batteries also. The long-term cycling test at 2 C for the battery constructed from the NRs retained 121 mA h g-1 after 200 cycles and 99.2 mA h g-1 after 800 cycles. The device has an excellent long-term cycling stability with a loss of only 0.04% per cycle.
RESUMEN
In this study, we develop a new synthetic method to grow anatase TiO2 crystals composed of truncated octahedral bipyramids (TOBs) with exposed {001} and {101} facets by a vapor-solid reaction growth (VSRG) method. The VSRG method employs TiCl4(g) to react with CaO(s)/Ca(OH)2(s) at 823-1043 K under atmospheric pressure. The O-deficient pale-blue TOB TiO2 crystals display high amount of both {001} and {101} facets. Together, they decompose methylene blue photocatalytically under UV-visible (UV-vis) light irradiation. The most-efficient TOB catalyst VT923 (grown at 923 K, average edge length 400 nm, average thickness 200 nm, and surface area 4.20 m2/g) shows a degradation rate constant k, 0.0527 min-1. This is close to that of the P25 standard 0.0577 min-1. However, the surface area of P25 (46.8 m2/g) is about 12 times that of VT923. The extraordinary performance of VT923 is attributed to the presence of high amount of coexisting {001} and {101} facets to form effective surface heterojunctions. They would separate photogenerated electrons and holes effectively on {101} and {001} surfaces, respectively. For VT923, the {001}/{101} ratio is 0.764, which is close to 1, the highest value observed for all TOB samples grown in this study. The surface heterojunctions prolong the electron-hole separation so that VT923 demonstrates the excellent photocatalytic capability. In addition, residual Cl atoms on the exposed faces are easily removed to show clean TiO surface layers with sufficient amount of O-deficient sites in the current samples.
