RESUMEN
This study aimed to measure masticatory performance (MP) using ß-carotene gummy jelly to investigate its relationship with skeletal properties in decompensated patients diagnosed with skeletal class III malocclusion. The study included 78 patients (38 men and 40 women) diagnosed with skeletal class III malocclusion without temporomandibular joint disorder and periodontal disease. MP was measured using a new masticatory measuring device and ß-carotene in the gummy jelly. Lateral and posteroanterior cephalograms were obtained, and skeletal properties (Me deviation, ANB, SNB, APDI, Wits, ODI, facial axis, body length, ramus length, SN-GoGn, anterior facial height, posterior facial height, saddle angle, articular angle, and gonial angle) were evaluated. MP differences according to age and sex and the effect of skeletal properties on MP were analyzed using multiple linear regression analysis. The MP of all patients was 3690.55±1428.77 mm², MP of the male group was 4043.05±1498.09 mm², and MP of the female group was 3355.68±1272.19 mm². Among the items investigated, the variable that affected MP was posterior facial height. Posterior facial height showed a positive correlation (P=0.022). There was no significant difference between MP and other skeletal properties (P>0.05). The severity of the hypodivergency in skeletal class III could affect MP. The relationship between facial asymmetry or skeletal relation and MP could not be explained in this study.
RESUMEN
Vertical bone augmentation for dental implants in the posterior mandibular region with significant bone resorption is challenging. For this purpose, methods such as block bone grafting with screw fixation, particulate bone grafting with titanium mesh or barrier membrane, and distraction osteogenesis have been used, and autogenous block bone grafting is considered the gold standard. However, the autogenous block bone grafting has the following disadvantages: bone harvesting is challenging, and block bone contouring according to the recipient site is time-consuming and laborious. Therefore, in this study, we report the use of particulate bone with a polycaprolactone/bioactive glass-7 scaffold, designed, and three-dimensionally printed preoperatively, to resolve the above-mentioned challenges.
Asunto(s)
Aumento de la Cresta Alveolar , Implantes Dentales , Humanos , Implantación Dental Endoósea/métodos , Aumento de la Cresta Alveolar/métodos , Minerales , Proceso Alveolar , Impresión TridimensionalRESUMEN
BACKGROUND: The purpose of this study was to establish a mechanical and histological basis for the development of biocompatible maxillofacial reconstruction implants by combining 3D-printed porous titanium structures and surface treatment. Improved osseointegration of 3D-printed titanium implants for reconstruction of maxillofacial segmental bone defect could be advantageous in not only quick osseointegration into the bone tissue but also in stabilizing the reconstruction. METHODS: Various macro-mesh titanium scaffolds were fabricated by 3D-printing. Human mesenchymal stem cells were used for cell attachment and proliferation assays. Osteogenic differentiation was confirmed by quantitative polymerase chain reaction analysis. The osseointegration rate was measured using micro computed tomography imaging and histological analysis. RESULTS: In three dimensional-printed scaffold, globular microparticle shape was observed regardless of structure or surface modification. Cell attachment and proliferation rates increased according to the internal mesh structure and surface modification. However, osteogenic differentiation in vitro and osseointegration in vivo revealed that non-mesh structure/non-surface modified scaffolds showed the most appropriate treatment effect. CONCLUSION: 3D-printed solid structure is the most suitable option for maxillofacial reconstruction. Various mesh structures reduced osteogenesis of the mesenchymal stem cells and osseointegration compared with that by the solid structure. Surface modification by microarc oxidation induced cell proliferation and increased the expression of some osteogenic genes partially; however, most of the markers revealed that the non-anodized solid scaffold was the most suitable for maxillofacial reconstruction.
Asunto(s)
Implantes Dentales , Oseointegración , Humanos , Osteogénesis , Impresión Tridimensional , Propiedades de Superficie , Titanio/química , Microtomografía por Rayos XRESUMEN
ABSTRACT: In the present study, the authors report rare case series with subcutaneous emphysema with or without pneumomediastinum and pneumothorax after orthognathic and facial bone contouring surgery, compare their clinical and radiologic findings, and suggest precautions. Four patients who showed subcutaneous emphysema on follow up chest X-ray and computed tomography after orthognathic and facial bone contouring surgery were included in the study. In all cases post-op subcutaneous emphysema were detected, however, the aspect and mechanisms of post-op air spread were all different. After the conservative management with administering the O 2 by nasal cannula or endotracheal tube, the symptoms were relieved except 1 patient who needed chest tube insertion and further supra-sternal incision. In conclusion, subcutaneous emphysema with or without pneumomediastinum and pneumothorax after orthognathic and facial bone contouring surgery can be occurred by cervical fascia injury or alveolar ruptures. To preventing those complications, traumatic naso-tracheal intubation, excessive positive pressure ventilation, intermaxillary fixation immediate after the surgery, and increase of intra-alveolar pressure of the patients should be avoided.
Asunto(s)
Enfisema Mediastínico , Neumotórax , Enfisema Subcutáneo , Huesos Faciales , Humanos , Intubación Intratraqueal/efectos adversos , Enfisema Mediastínico/diagnóstico por imagen , Enfisema Mediastínico/etiología , Enfisema Mediastínico/terapia , Neumotórax/diagnóstico por imagen , Neumotórax/etiología , Neumotórax/terapia , Enfisema Subcutáneo/diagnóstico por imagen , Enfisema Subcutáneo/etiología , Enfisema Subcutáneo/terapiaRESUMEN
The objective of this retrospective study is to verify the effectiveness and safety of patient-specific titanium implants on maxillofacial bones, with a long-term follow-up. Total 16 patients with various maxillofacial defects underwent reconstruction using patient-specific titanium implants. Titanium implants, manufactured by electron beam melting, selective laser sintering, or milling, were inserted into the maxilla, mandible, or zygoma. Long-term follow-up (36.7 ± 20.1 months) was conducted after the surgery. Bone fusion of the titanium implant body, postoperative infection, implant malunion, functional results, patient satisfaction, subsidence, osteolysis around the implants, and complications were recorded and analyzed at the last follow-up. Of the 28 implants, only one failed to unite with the bone; therefore, revision surgery was performed. No osteolysis or subsidence around the titanium implants nor adverse events were observed; the mean VAS score for satisfaction was 9. All patients enrolled in this trial were esthetically and functionally satisfied with their surgical results, and fixation failure and esthetic dissatisfaction complications were well resolved. Patient-specific titanium showed satisfactory outcomes when used to treat various oral and maxillofacial defects. A 3D printed titanium implant can be effectively used in the reconstruction of the zygoma and mandible instead of autogenous bone without donor site morbidity.
Asunto(s)
Procedimientos de Cirugía Plástica , Titanio , Humanos , Mandíbula/cirugía , Prótesis e Implantes , Procedimientos de Cirugía Plástica/métodos , Estudios RetrospectivosRESUMEN
The purpose of this study is to present a novel maxillary sinus ventilation drainage (MSVD) device which facilitates blood drainage and nasal breathing after Le Fort I osteotomy. One hundred patients who underwent bimaxillary orthognathic surgery from January 2016 to June 2016 at the Department of Oral and Maxillofacial Surgery, Chung-Ang University Hospital were retrospectively selected and divided into two groups. MSVD was applied in 50 patients, who were allocated to the MSVD group, while the remaining 50 patients, in whom MSVD was not applied, were allocated to the non-MSVD group. All patients underwent a cone-beam computed tomography (CBCT) scan before and 2 days after surgery. CBCT was used to analyze middle meatus patency and the percentage of hematoma volume per entire maxillary sinus volume. Statistical comparisons between the two groups were performed using the Chi-squared and Mann-Whitney U tests to investigate the clinical effectiveness of MSVD. The MSVD group showed significantly higher maintenance ratio of the middle meatus patency and a higher percentage of maxillary sinus air volume (p < 0.05) than the non-MSVD group. MSVD facilitated nasal breathing after Le Fort I osteotomy by reducing hematoma inside the maxillary sinus and promoting middle meatal patency.
RESUMEN
Controversies exist regarding the need for prophylactic extraction of mandibular third molars in patients who plan to undergo orthognathic surgery. An 18-year-old male patient was diagnosed with mandibular prognathism and maxillary retrognathism with mild facial asymmetry. He had a severely damaged mandibular first molar and a horizontally impacted third molar. After extraction of the first molar, the second molar was protracted into the first molar space, and the third molar erupted into the posterior line of occlusion. The orthognathic surgery involved clockwise rotation of the maxillomandibular complex as well as angle shaving and chin border trimming. Patients who are missing or have damaged mandibular molars should be monitored for eruption of third molars to replace the missing posterior tooth regardless of the timing of orthognathic surgery.
RESUMEN
ABSTRACT: Zygoma, which is located at the middle third of the face, has a significant impact on the facial impression with its volume and prominence. CaO-SiO 2 -P 2 O 5 -B 2 O 3 glass-ceramics (BGS-7) has been reported as a new alternative of nonresorbable bone grafting material, which has bioactivity of inducing human osteoblast between bone and implant, resulting integration to the bone. Furthermore, its chemical characteristics are similar to bone, resulting in radiopacity with no metallic artifact on the radiographic images. With the development of Computer aided design-Computer aided manufacturing technology, BGS-7 can be manufactured into a patient-specific design.During follow-up periods, 3D printed BGS-7 implant did not displace from the initial recipient site. By cone-beam computed tomography evaluation, a gap between bone and BGS-7 was filled with the radiopacity, which implied bony fusion. Consequently, this clinical case shows that the BGS-7 implant could be an effective and safe graft material for zygoma bone defects.
Asunto(s)
Implantes Dentales , Cigoma , Cerámica/farmacología , Humanos , Osteoblastos , Impresión Tridimensional , Cigoma/diagnóstico por imagen , Cigoma/cirugíaRESUMEN
OBJECTIVES: The purpose of this study was to investigate the condylar morphology and position of Koreans using cone-beam computed tomography (CBCT) images. Analyzing the mean values of this study with reference to left and right sides, gender, and age will help to understand the size of the condyle and glenoid fossa, condylar morphology, and temporomandibular joint (TMJ) symmetry for establishing the standard temporomandibular joint structures of Koreans and then design the standard temporomandibular joint prosthesis for Koreans. RESULTS: There was no significant result in the condyle size, condyle axis angle, joint space, fossa depth, and mandibular body size between the left and right sides (p > 0.05). On the other hand, the mediolateral width of the condyle and mandibular body size show significantly different with the gender (P < 0.05). Also, significant differences were found in condyle size, joint space, fossa depth, and mandibular body size according to age groups (p < 0.05). CONCLUSIONS: Condylar position and morphology vary according to side, age, and gender. The results of this study are expected to help in customizing a treatment for the patients who need TMJ reconstruction by predicting the TMJ morphology according to age and gender and design the standard temporomandibular joint prosthesis for the Koreans.
RESUMEN
In porous titanium scaffolds manufactured via 3D printing, the differences in bone formation according to pore design and implantation period were studied. Titanium scaffolds with three types of different pore structures (Octadense, Gyroid, and Dode) were fabricated via 3D printing using the selective laser melting method. Mechanical properties of scaffolds were investigated. Prepared specimens were inserted into both femurs of nine rabbits and their clinical characteristics were observed. Three animals were sacrificed at the 2nd, 4th, and 6th weeks, and the differences in bone formation were radiologically and histologically analyzed. The percentage of new bone and surface density in the pore structure were observed to be approximately 25% and 8 mm2/mm3, respectively. There was no difference in the amount of newly formed bone according to the pore design at 2, 4, and 6 weeks. In addition, no differences in the amount of newly formed bone were observed with increasing time within the same pore design for all three designs. During the 6-week observation period, the proportion of new bones in the 3D-printed titanium scaffold was approximately 25%. Differences in bone formation according to the pore design or implantation period were not observed.
RESUMEN
The three-dimensional (3D) cell-printing technique has been identified as a new biofabrication platform because of its ability to locate living cells in pre-defined spatial locations with scaffolds and various growth factors. Osseointegrated dental implants have been regarded as very reliable and have long-term reliability. However, host defense mechanisms against infections and micro-movements have been known to be impaired around a dental implant because of the lack of a periodontal ligament. In this study, we fabricated a hybrid artificial organ with a periodontal ligament on the surface of titanium using 3D printing technology. CEMP-1, a known cementogenic factor, was enhanced in vitro. In animal experiments, when the hybrid artificial organ was transplanted to the calvarial defect model, it was observed that the amount of connective tissue increased. 3D-printed hybrid artificial organs can be used with dental implants, establishing physiological tooth functions, including the ability to react to mechanical stimuli and the ability to resist infections.
Asunto(s)
Bioimpresión/métodos , Ligamento Periodontal , Impresión Tridimensional , Células Madre/citología , Ingeniería de Tejidos/métodos , Andamios del Tejido , Adolescente , Adulto , Animales , Humanos , Masculino , Proteínas , Ratas , Regeneración , Titanio , Adulto JovenRESUMEN
A mandibular continuity defect can be repaired using either a prosthetic device or autogenous bone. A titanium reconstruction plate can be used with a localized or vascularized flap over the defect of the mandible. Unfortunately, the plate may fail due to plate exposure, screw loosening, fracture, or infection, and will need to be removed. Plate exposure though the skin or mucosa is one of the main reasons for failure. In the present work, the authors introduced a lingually positioned reconstruction plate fabricated via three-dimensional printed bending support. This custom reconstruction plate can avoid plate re-exposure as well as reduce surgical errors and operation time.
RESUMEN
The purpose of this study was to evaluate the clinical efficacy and safety of patient-specific additive-manufactured CaOSiO2-P2O5-B2O3 glass-ceramic (BGS-7) implants for reconstructing zygomatic bone defects at a 6-month follow-up. A prospective, single-arm, single-center, clinical trial was performed on patients with obvious zygoma defects who needed and wanted reconstruction. The primary outcome variable was a bone fusion between the implant and the bone evaluated by computed tomography (CT) at 6 months post surgery. Secondary outcomes, including implant immobilization, satisfaction assessment, osteolysis, subsidence of the BGS-7 implant, and safety, were assessed. A total of eight patients were enrolled in the study. Two patients underwent simultaneous reconstruction of the left and right malar defects using a BGS-7 3D printed implant. Cone beam CT analysis showed that bone fusion at 6 months after surgery was 100%. We observed that the average fusion rate was 76.97%. Osteolysis around 3D printed BGS-7 implants was not observed. The mean distance displacement of all 10 implants was 0.4149 mm. Our study showed no adverse event in any of the cases. The visual analog scale score for satisfaction was 9. All patients who enrolled in this trial were aesthetically and functionally satisfied with the surgical results. In conclusion, this study demonstrates the safety and promising value of patient-specific 3D printed BGS-7 implants as a novel facial bone reconstruction method.
RESUMEN
OBJECTIVES: The purpose of this study was to evaluate the effectiveness of the intraoral use of subperiosteally placed self-inflating tissue expanders for subsequent bone augmentation and implant integrity. MATERIAL AND METHODS: A prospective, multicenter, randomized controlled trial was performed on patients requiring alveolar bone graft for dental implant insertion. Patients were assigned to three groups: tissue expansion and tunneling graft (TET group), tissue expansion and conventional bone graft (TEG), and control group without tissue expansion. Dimensional changes of soft tissue and radiographic vertical bone gain, retention, and peri-implant marginal bone changes were evaluated and secondary outcomes; clinical complications and thickness changes of expanded overlying tissue were assessed. RESULTS: Among 75 patients screened, a total of 57 patients were included in the final analysis. Most patients showed uneventful soft tissue expansion without any inflammatory sign or symptoms. Ultrasonographic measurements of overlying gingiva revealed no thinning after tissue expansion (p > 0.05). Mean soft vertical and horizontal tissue measurements at the end of its expansion were 5.62 and 6.03 mm, respectively. Significantly higher vertical bone gain was shown in the TEG (5.71 ± 1.99 mm) compared with that in the control patients (4.32 ± 0.97 mm; p < 0.05). Hard tissue retention- measured by bone resorption after 6 months-showed that control group showed higher amount of vertical (2.06 ± 1.00 mm) and horizontal bone resorption (1.69 ± 0.81 mm) compared to that of the TEG group (p < 0.05). CONCLUSION: The self-inflating tissue expander effectively augmented soft tissue volume and both conventional bone graft and tunneling techniques confirmed their effectiveness in bone augmentation. With greater amount of bone gain and better 6 month hard tissue integrity, the TEG group compared to the control group-without tissue expansion-showed that the combined modality of tissue expander use and guided bone regeneration (GBR) technique may improve the outcome and predictability of hard tissue augmentation.
RESUMEN
OBJECTIVES: Conventional guided bone regeneration (GBR) limits the amount of bone graft due to limited soft tissue expansion. We hypothesize that the use of tissue expander will successfully augment soft tissue prior to bone graft, allowing for sufficient amount of grafting which will lead to a more stable and effective vertical bone graft. The authors aimed to evaluate effectiveness of the novel self-inflating tissue expander for vertical augmentation in terms of soft tissue expansion, clinical outcomes, and related complications. MATERIAL AND METHODS: A prospective, multicenter, randomized controlled trial was performed on patients requiring vertical augmentation. For experimental group patients, the tissue expander was subperiosteally implanted and followed by a tunneling bone graft without full flap reflection. Control patients underwent conventional vertical GBR. Primary objectives were to evaluate the dimensional changes of soft tissue and radiographic vertical bone gain and retention. As a secondary outcome, clinical complications and thickness changes of expanded overlying tissue were assessed and analyzed. RESULTS: Twenty-three patients in each group were included. During a 4-week expansion, two of the experimental group showed over-expansion and one showed mucosal perforation associated with previous severe scars. The other patients showed uneventful expansion and mean tissue augmentation was 6.88 ± 1.64 mm vertically. Ultrasonographic measurements of overlying gingiva revealed no thinning after tissue expansion (p > .05). Significantly higher vertical bone gain was shown in the experimental group (5.12 ± 1.25 mm) compared with that in the control patients (4.22 ± 1.15 mm; p < .05). After a 6-month retention period, the mean vertical bone measurement of the controls had decreased to 1.90 mm (55.0% reduction), which was a significantly greater decrease than that in the experimental group (mean 3.55 mm, 30.7% reduction; p < .05). CONCLUSION: Our results demonstrated the effectiveness of tissue expanders followed by tunneling bone graft for vertical augmentation; however, studies comparing the two techniques without tissue expanders are needed to elucidate the net effect of tissue expansion.
Asunto(s)
Aumento de la Cresta Alveolar , Dispositivos de Expansión Tisular , Proceso Alveolar , Regeneración Ósea , Trasplante Óseo , Implantación Dental Endoósea , Humanos , Estudios Prospectivos , Expansión de TejidoRESUMEN
OBJECTIVES: To investigate factors associated with spontaneous mesialization of impacted third molars after second molar protraction to close the space caused by a missing mandibular first molar (L-6) or retained deciduous mandibular second molars with a missing succedaneous premolar (L-E). MATERIALS AND METHODS: Panoramic radiographs of patients treated with mandibular second molar protraction to close the space due to missing L-6 or L-E (14 males, 36 females, mean age = 18.6 ± 4.4 years) were analyzed before treatment (T1) and after second molar protraction (T2). Factors associated with the amount of third molar mesialization were investigated using regression analyses. RESULTS: Mandibular second molars were protracted by 5.1 ± 2.1 mm and 5.8 ± 2.7 mm, measured at the crown and root furcation, respectively. After second molar protraction, third molars showed spontaneous mesialization by 4.3 ± 1.6 mm and 3.8 ± 2.6 mm, measured at the crown and root furcation, respectively. Nolla's stage of the third molar at T1 (B = 0.20, P = .026) and second molar protraction time (B = 0.04, P = .042) were significantly associated with the amount of third molar mesialization. CONCLUSIONS: Greater third molar mesialization was observed when Nolla's stage of the third molar was higher before treatment and when the second molar protraction time was longer.
Asunto(s)
Mandíbula , Tercer Molar , Diente Impactado , Adolescente , Adulto , Femenino , Humanos , Masculino , Mandíbula/diagnóstico por imagen , Diente Molar , Tercer Molar/diagnóstico por imagen , Radiografía Panorámica , Adulto JovenRESUMEN
INTRODUCTION: This study aimed to identify significant factors affecting the spontaneous angular changes of impacted mandibular third molars as a result of second molar protraction. Temporary skeletal anchorage devices in the missing mandibular first molar (ML-6) or missing deciduous mandibular second molar (ML-E) with missing succedaneous premolar spaces provided traction. METHODS: Forty-one mandibular third molars of 34 patients (10 male and 24 female; mean age 18.3 ± 3.7 years) that erupted after second molar protraction were included in this study. They were classified into upright (U) and tilted (T) groups. Linear and angular measurements were performed at the time of treatment initiation (T1) and of ML-6 or ML-E space closure (T2). Regression analyses were used to identify significant factors related to third molar uprighting. RESULTS: Nolla stage (odds ratio [OR] 4.1), sex (OR 0.003 for male), third molar angulation at T1 (OR 1.1), missing tooth space (OR 0.006), rate of third molar eruption (OR 23.3), and rate of second molar protraction (OR 0.2) significantly affected third molar uprighting. Age, third molar angulation at T1, rate of third molar eruption, and rate of second molar protraction were significant factors for predicting third molar angulation at T2. CONCLUSIONS: Available space for third molar eruption before and after second molar protraction is not associated with uprighting of erupting third molars. Older patients whose third molars are in greater Nolla stage, are in a more upright position at T1, and have a greater eruption rate have a greater chance for third molar uprighting. Alternatively, an increase in second molar protraction rate results in mesial tipping of the third molars.
Asunto(s)
Maloclusión/prevención & control , Maloclusión/fisiopatología , Mandíbula/fisiopatología , Tercer Molar/fisiopatología , Diente Impactado/fisiopatología , Adolescente , Adulto , Puntos Anatómicos de Referencia , Diente Premolar , Femenino , Humanos , Masculino , Maloclusión/diagnóstico por imagen , Mandíbula/anatomía & histología , Mandíbula/diagnóstico por imagen , Diente Molar/anatomía & histología , Diente Molar/diagnóstico por imagen , Diente Molar/fisiopatología , Tercer Molar/anatomía & histología , Tercer Molar/diagnóstico por imagen , Aparatos Ortodóncicos , Cierre del Espacio Ortodóncico , Ortodoncia Correctiva , Erupción Dental , Diente Primario , Diente Impactado/complicaciones , Diente Impactado/diagnóstico por imagen , Adulto JovenRESUMEN
OBJECTIVES: The purpose of this study was to compare the lip line cant (LLC) changes after 1 and 2-jaw surgery, and to evaluate the correlations of the craniofacial factors affecting LLC. METHODS: The study subjects were selected (LLC amount within 1.5-6.0°) from among the patients diagnosed with Class III malocclusion who underwent one (nâ=â20) or 2-jaw surgery (nâ=â20). Cone beam computed tomography images were obtained immediately before the operation (T1) and 6 months after the operation (T2). Preoperative and postoperative craniofacial measurements were obtained. RESULTS: The study subjects showed 3.12° LLC on average before undergoing 1-jaw surgery, and their LLC changed to 1.27° after the surgery. As for 2-jaw surgery, the subjects showed 3.38° LLC on average before the surgery and 0.98° after the surgery. LLC at pre-treatment may be more affected by a cant of the occlusal plane in the mandible than maxilla. In the comparison of the value of changes of LLC, the value of 2-jaw surgery was bigger than the value of 1-jaw surgery but the difference was statistically insignificant. LIMITATIONS: This study had a limitation in that the muscles were not considered. And the metal bracket or metal crown and bridge, however, can cause noise and blurring artifacts in CT, which can lead to a low resolution. And the limited number of the patients should be considered. CONCLUSIONS: In correlation analysis, both pre-surgery LLC and change of LLC have correlation with almost all the craniofacial measurement. Lip-line cant of patients with facial asymmetry has higher correlation with mandibular cant than with other cants. To improve the LLC, a surgical plan should be established to minimize the mandibular cant using the computer simulation as well as the maxillary cant.
Asunto(s)
Maloclusión de Angle Clase III/diagnóstico por imagen , Mandíbula/diagnóstico por imagen , Maxilar/diagnóstico por imagen , Cefalometría , Tomografía Computarizada de Haz Cónico , Oclusión Dental , Asimetría Facial/cirugía , Femenino , Humanos , Labio/anatomía & histología , Masculino , Maloclusión de Angle Clase III/cirugía , Mandíbula/cirugía , Maxilar/cirugía , Procedimientos Quirúrgicos OrtognáticosRESUMEN
The investigators hypothesized there would be differences between the sexes in recovery pattern following bimaxillary orthognathic surgery as measured by patient responses at 5 weeks postprocedure. A total of 378 participants underwent bimaxillary orthognathic surgery with or without adjunctive procedures. Participants received questionnaires 5 weeks postsurgery when they visited the outpatient clinic. The questionnaires include variances in surgical factors by sex, and postoperative symptoms which were most difficult to tolerate experiences by sex, respectively. Females were more likely to undergo malarplasty (zygoma reduction) than were male participants (P = <.001), and they required larger maxillary setback than did male participants (P = .003). Malarplasty was significantly correlated with ear fullness in total and female participants (p-value .018, .016, respectively). Snoring is significantly associated with malarplasty and segment osteotomy procedure without gender predominance (p-value = .026, .028, respectively). Over half of participants complained of nasal congestion (55.6%), followed by swelling (29.3%), pain (15.4%), breathing difficulty (10.6%). In conclusion, males and females showed different patterns of postoperative recovery following bimaxillary orthognathic surgery.