Photoelectrochemical approaches for the conversion of lignin at room temperature.

The selective cleavage of C-C/C-O linkages represents a key step toward achieving the chemical conversion of biomass to targeted value-added chemical products under ambient conditions. Using photoelectrosynthetic solar cells is a promising method to address the energy intensive depolymerization of lignin for the production of biofuels and valuable chemicals. This feature article gives an in-depth overview of recent progress using dye-sensitized photoelectrosynthetic solar cells (DSPECs) to initiate the cleavage of C-C/C-O bonds in lignin and related model compounds. This approach takes advantage of N-oxyl mediated catalysis in organic electrolytes and presents a promising direction for the sustainable production of chemicals currently derived from fossil fuels.

Capacitive Removal of Pb ions via Electrosorption on Novel Willow Biochar - Manganese Dioxide Composites.

AbstractBiochar derived from lignocellulosic biomass has been used as a low-cost adsorbent in wastewater treatment applications. Due to its rich porous structure and good electrical conductivity, biochar can be used as a cost-effective electrode material for capacitive deionization of water. In this work, willow biochar was prepared through carbonization of shrub willow chips, activated with potassium hydroxide, and loaded with manganese dioxide (WBC-K-MnO2 nanocomposite). The prepared materials were used to electrochemically adsorb Pb2+ from aqueous solutions. Under the applied potential of 1.0 V, the WBC-K-MnO2 electrode exhibited a high Pb2+ specific electrosorption capacity (23.3 mg/g) as compared to raw willow biochar (4.0 mg/g) and activated willow biochar (9.2 mg/g). KOH activation followed by MnO2 loading on the surface of raw biochar enhanced its BET surface area (178.7 m2/g) and mesoporous volume ratio (42.1%). Moreover, the WBC-K-MnO2 nanocomposite exhibited the highest specific capacitance value of 234.3 F/g at a scan rate of 5 mV/s. The electrosorption isotherms and kinetic data were well explained by the Freundlich and pseudo-second order models, respectively. The WBC-K-MnO2 electrode demonstrated excellent reusability with a Pb2+ electrosorption efficiency of 76.3% after 15 cycles. Thus, the WBC-K-MnO2 nanocomposite can serve as a promising candidate for capacitive deionization of heavy metal contaminated water.

BiVO4 Photoanodes for TEMPO-Mediated Benzyl Alcohol Oxidation in Organic Media.

The photoelectrochemical production of fuels, exemplified by light-driven water splitting to hydrogen and oxygen, offers a sustainable option to offset dependence on fossil fuels. A low-cost, efficient, and stable photoelectrochemical approach to solar fuels remains elusive but using similar materials and photoelectrodes for chemical production or biomass conversion offers an appealing alternative. This work reports a facile method for fabricating pristine (undoped) BiVO4 photoanodes to carry out TEMPO-mediated benzyl alcohol oxidation to benzaldehyde in organic media (TEMPO=2,2,6,6-tetramethylpiperidinyl-N-oxyl). The best performing BiVO4 photoanode studied here gave a faradaic efficiency (FE) of 85±5% for benzaldehyde formation in the presence of TEMPO and pyridine during a 2.5-hour reaction. Compared with direct electrocatalytic conversion under the same conditions, light capture and conversion by the BiVO4 surface decreased the required applied bias by 46 %. To our knowledge, this is the first report of visible light assisted, TEMPO-mediated benzyl alcohol oxidation using pristine BiVO4 photoanodes in organic media.

Fabrication of Multi-Vacancy-Defect MWCNTs by the Removal of Metal Oxide Nanoparticles.

This study aims to increase the specific surface area of multi-walled carbon nanotubes (MWCNTs) by forming and subsequently removing various metal oxide nanoparticles on them. We used facile methods, such as forming the particles without using a vacuum or gas and removing these particles through simple acid treatment. The shapes of the composite structures on which the metal oxide particles were formed and the formation of multi-vacancy-defect MWCNTs were confirmed via transmission electron microscopy and scanning electron microscopy. The crystallinity of the formed metal oxide particles was confirmed using X-ray diffraction analysis. Through specific surface area analysis and Raman spectroscopy, the number of defects formed and the degree and tendency of defect-formation in each metal were determined. In all the cases where the metal oxide particles were removed, the specific surface area increased, and the metal inducing the highest specific surface area was determined.

Enhanced Photocatalytic Alcohol Oxidation at the Interface of RuC-Coated TiO2 Nanorod Arrays.

Visible-light-driven organic oxidations carried out under mild conditions offer a sustainable approach to performing chemical transformations important to the chemical industry. This work reports an efficient photocatalytic benzyl alcohol oxidation process using one-dimensional (1D) TiO2 nanorod (NR)-based photoanodes with surface-adsorbed ruthenium polypyridyl photocatalysts at room temperature. The photocatalyst bis(2,2'-bipyridine)(4,4'-dicarboxy-2,2'-bipyridine)Ru(II) (RuC) was covalently anchored onto TiO2 nanorod arrays grown on fluorine-doped tin oxide (FTO) electrode surfaces (FTO|t-TiO2|RuC, t = the thickness of TiO2 NR). Under aerobic conditions, the photophysical and photocatalytic properties of FTO|t-TiO2|RuC (t = 1, 2, or 3.5 µm) photoanodes were investigated in a solution containing a hydrogen atom transfer mediator (4-acetamido-2,2,6,6-tetramethylpiperidine-N-oxyl, ACT) as cocatalyst. Dye-sensitized photoelectrochemical cells (DSPECs) using the FTO|t-TiO2|RuC (t = 1, 2, or 3.5 µm) photoanodes and ACT-containing electrolyte were investigated for carrying out photocatalytic oxidation of a lignin model compound containing a benzylic alcohol functional group. The best-performing anode surface, FTO|1-TiO2|RuC (shortest NR length), oxidized the 2° alcohol of the lignin model compound to the Cα-ketone form with a > 99% yield over a 4 h photocatalytic experiment with a Faradaic efficiency of 88%. The length of TiO2 NR arrays (TiO2 NRAs) on the FTO substrate influenced the photocatalytic performance with longer NRAs underperforming compared to the shorter arrays. The influence of the NR length is hypothesized to affect the homogeneity of the RuC coating and accessibility of the ACT mediator to the RuC-coated TiO2 surface. The efficient photocatalytic alcohol oxidation with visible light at room temperature as demonstrated in this study is important to the development of sustainable approaches for lignin depolymerization and biomass conversion.

Effect of reducing agents on the synthesis of anisotropic gold nanoparticles.

The seed-mediated method is a general procedure for the synthesis of gold nanorods (Au NRs), and reducing agents such as ascorbic acid (AA) and hydroquinone (HQ) are widely used for the growth process. Further, they are mild reducing agents; however, when AA is used, controlling the size of Au NRs with a higher aspect ratio (localized surface plasmon resonance (LSPR) peak, λLmax > 900 nm) is challenging because it results in a faster growth rate of Au NRs. In contrast, when HQ is used, Au NRs with a higher aspect ratio can be synthesized as it slows down the growth rate of the Au NRs and greatly enhanced the λLmax. However, the increase in λLmax is still needs not satisfactory due to the limited enhancement in the aspect ratio of Au NRs due to utilization of single reducing agent. The growth kinetics of the Au NRs can be modulated by controlling the reducing power of the reducing agents. In such scenario, judicious use of two reducing agents such as AA and HQ simultaneously can help us to design Au NRs of higher aspect ratio in a controlled manner due to the optimum growth rate resulting from the combined effect of both the reducing agents. In this study, we investigated the effect of the two reducing agents by controlling the volume ratios. When the growth solution contains both the reducing agents, the growth of Au NRs is first initiated by the fast reduction of Au3+ to Au+ due to stronger reducing power of the AA and when the AA in the growth solution is completely utilized, further growth of the Au NRs continues as a result of the HQ thereby resulting to high aspect ratio Au NRs. Consequently, the LSPR peak (λLmax > 1275 nm) can be tuned by controlling the volume ratios of the reducing agents.

Engineered Sorghum Bagasse Enables a Sustainable Biorefinery with p-Hydroxybenzoic Acid-Based Deep Eutectic Solvent.

Integrating multidisciplinary research in plant genetic engineering and renewable deep eutectic solvents (DESs) can facilitate a sustainable and economic biorefinery. Herein, we leveraged a plant genetic engineering approach to specifically incorporate C6 C1 monomers into the lignin structure. By expressing the bacterial ubiC gene in sorghum, p-hydroxybenzoic acid (PB)-rich lignin was incorporated into the plant cell wall while this monomer was completely absent in the lignin of the wild-type (WT) biomass. A DES was synthesized with choline chloride (ChCl) and PB and applied to the pretreatment of the PB-rich mutant biomass for a sustainable biorefinery. The release of fermentable sugars was significantly enhanced (∼190 % increase) compared to untreated biomass by the DES pretreatment. In particular, the glucose released from the pretreated mutant biomass was up to 12 % higher than that from the pretreated WT biomass. Lignin was effectively removed from the biomass with the preservation of more than half of the ß-Ο-4 linkages without condensed aromatic structures. Hydrogenolysis of the fractionated lignin was conducted to demonstrate the potential of phenolic compound production. In addition, a simple hydrothermal treatment could selectively extract PB from the same engineered lignin, showing a possible circular biorefinery. These results suggest that the combination of PB-based DES and engineered PB-rich biomass is a promising strategy to achieve a sustainable closed-loop biorefinery.

Sustainable hydrogen production from water using tandem dye-sensitized photoelectrochemical cells.

If generated from water using renewable energy, hydrogen could serve as a carbon-zero, environmentally benign fuel to meet the needs of modern society. Photoelectrochemical cells integrate the absorption and conversion of solar energy and chemical catalysis for the generation of high value products. Tandem photoelectrochemical devices have demonstrated impressive solar-to-hydrogen conversion efficiencies but have not become economically relevant due to high production cost. Dye-sensitized solar cells, those based on a monolayer of molecular dye adsorbed to a high surface area, optically transparent semiconductor electrode, offer a possible route to realizing tandem photochemical systems for H2 production by water photolysis with lower overall material and processing costs. This review addresses the design and materials important to the development of tandem dye-sensitized photoelectrochemical cells for solar H2 production and highlights current published reports detailing systems capable of spontaneous H2 formation from water using only dye-sensitized interfaces for light capture.

Photocatalytic hydrogen evolution from biomass conversion.

Biomass has incredible potential as an alternative to fossil fuels for energy production that is sustainable for the future of humanity. Hydrogen evolution from photocatalytic biomass conversion not only produces valuable carbon-free energy in the form of molecular hydrogen but also provides an avenue of production for industrially relevant biomass products. This photocatalytic conversion can be realized with efficient, sustainable reaction materials (biomass) and inexhaustible sunlight as the only energy inputs. Reported herein is a general strategy and mechanism for photocatalytic hydrogen evolution from biomass and biomass-derived substrates (including ethanol, glycerol, formic acid, glucose, and polysaccharides). Recent advancements in the synthesis and fundamental physical/mechanistic studies of novel photocatalysts for hydrogen evolution from biomass conversion are summarized. Also summarized are recent advancements in hydrogen evolution efficiency regarding biomass and biomass-derived substrates. Special emphasis is given to methods that utilize unprocessed biomass as a substrate or synthetic photocatalyst material, as the development of such will incur greater benefits towards a sustainable route for the evolution of hydrogen and production of chemical feedstocks.

Catalytic hydrogen atom transfer from hydrosilanes to vinylarenes for hydrosilylation and polymerization.

Because of the importance of hydrogen atom transfer (HAT) in biology and chemistry, there is increased interest in new strategies to perform HAT in a sustainable manner. Here, we describe a sustainable, net redox-neutral HAT process involving hydrosilanes and alkali metal Lewis base catalysts - eliminating the use of transition metal catalysts - and report an associated mechanism concerning Lewis base-catalysed, complexation-induced HAT (LBCI-HAT). The catalytic LBCI-HAT is capable of accessing both branch-specific hydrosilylation and polymerization of vinylarenes in a highly selective fashion, depending on the Lewis base catalyst used. In this process, earth abundant, alkali metal Lewis base catalyst plays a dual role. It first serves as a HAT initiator and subsequently functions as a silyl radical stabilizing group, which is critical to highly selective cross-radical coupling. EPR study identified a potassiated paramagnetic species and multistate density function theory revealed a high HAT character, yet multiconfigurational nature in the transition state of the reaction.

Polymer Chromophore-Catalyst Assembly for Solar Fuel Generation.

A polystyrene-based chromophore-catalyst assembly (poly-2) has been synthesized and assembled at a mesoporous metal oxide photoanode. The assembly contains water oxidation catalyst centers based on [Ru(trpy) (phenq)]2+ (Ru-Cat) and [Ru(bpy)3]2+ derivatives (Ru-C) as chromophores (trpy= 2,2';6,2″- terpyridine, phenq = 2-(quinol-8'-yl)-1,10-phenanthroline and bpy = 2,2'-bipyridine). The photophysical and electrochemical properties of the polychromophore-oxidation catalyst assembly were investigated in solution and at the surface of mesoporous metal oxide films. The layer-by-layer (LbL) method was utilized to construct multilayer films with cationic poly-2 and anionic poly(acrylic acid) (PAA) for light-driven photochemical oxidations. Photocurrent measurements of (PAA/poly-2)10 LbL films on mesoporous TiO2 demonstrate light-driven oxidation of phenol and benzyl alcohol in aqueous solution. Interestingly, illumination of (PAA/poly-2)5 LbL films on a fluorine doped SnO2/TiO2 core/shell photoanode in aqueous solution gives rise to an initial photocurrent (∼18.5 µA·cm-2) that is in part ascribed to light driven water oxidation.

Polymer-based chromophore-catalyst assemblies for solar energy conversion.

The synthesis of polymer-based assemblies for light harvesting has been motivated by the multi-chromophore antennas that play a role in natural photosynthesis for the potential use in solar conversion technologies. This review describes a general strategy for using polymer-based chromophore-catalyst assemblies for solar-driven water oxidation at a photoanode in a dye-sensitized photoelectrochemical cell (DSPEC). This report begins with a summary of the synthetic methods and fundamental photophysical studies of light harvesting polychormophores in solution which show these materials can transport excited state energy to an acceptor where charge-separation can occur. In addition, studies describing light harvesting polychromophores containing an anchoring moiety (ionic carboxylate) for covalent bounding to wide band gap mesoporous semiconductor surfaces are summarized to understand the photophysical mechanisms of directional energy flow at the interface. Finally, the performance of polychromophore/catalyst assembly-based photoanodes capable of light-driven water splitting to oxygen and hydrogen in a DSPEC are summarized.

Polymer-Based Ruthenium(II) Polypyridyl Chromophores on TiO2 for Solar Energy Conversion.

A polychromophoric light-harvesting assembly featuring a polystyrene (PS) backbone with ionic carboxylate-functionalized Ru(II) polypyridyl complexes as pendant groups (PS-Ru-A) was synthesized and successfully anchored onto mesoporous structured TiO2 films (TiO2 //PS-Ru-A). Studies of the resulting TiO2 //PS-Ru-A films carried out by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM) confirmed that the ionic carboxylated Ru(II) complexes from PS-Ru-A led to the surface immobilization on the TiO2 film. Monochromatic light photocurrent spectroscopy (IPCE) and white light (AM1.5G) current-voltage studies of dye-sensitized solar cells using the TiO2 //PS-Ru-A photoanode give rise to modest photocurrent and white light efficiency (24 % peak IPCE and 0.33 % PCE, respectively). The photostability of surface-bound TiO2 //PS-Ru-A films was tested and compared to a monomeric Ru(II) complex (TiO2 //Ru-A), showing an enhancement of ∼14 % in the photostability of PS-Ru-A. Transient absorption measurements reveal that electron injection from surface-bound pendants occurs on the picosecond time scale, similar to TiO2 //Ru-A, while time-resolved emission measurements reveal delayed electron injection occurring in TiO2 //PS-Ru-A on the nanosecond time scale, underscoring energy transport from unbound to surface-bound complexes. Additionally, charge recombination is delayed in PS-Ru-A, pointing towards intra-assembly hole transport to complexes away from the surface. Molecular dynamics simulations of PS-Ru-A in fluid solution indicate that a majority of the pendant Ru(II) complexes lie within 10-20 Šof each other, facilitating efficient energy- and charge transport among the pendant complexes.

Conjugated Polyelectrolyte-Sensitized TiO2 Solar Cells: Effects of Chain Length and Aggregation on Efficiency.

Two sets of conjugated polyelectrolytes with different molecular weights (Mn) in each set were synthesized. All polymers feature the same conjugated backbone with alternating (1,4-phenylene) and (2,5-thienylene ethynylene) repeating units, but different linkages between the backbone and side chains, namely, oxy-methylene (-O-CH2-) (P1-O-n, where n = 7, 9, and 14) and methylene (-CH2-) (P2-C-n, n = 7, 12, and 18). They all bear carboxylic acid moieties as side chains, which bind strongly to titanium dioxide (TiO2) nanoparticles. The two sets of polymers were used as light-harvesting materials in dye-sensitized solar cells. Despite the difference in molecular weight, polymers within each set have very similar light absorption properties. Interestingly, under the same working conditions, the overall cell efficiency of the P1-O-n series increases with a decreasing molecular weight while the efficiency of the P2-C-n series remains constant regardless of the molecular weight. Steady state photophysical measurements and dynamic light scattering investigation prove that P1-O-n polymers aggregate in solution while P2-C-n series are in the monomeric state. In P1-O-n series, a higher-molecular weight polymer results in a larger aggregate, which reduces the amount of polymers that are adsorbed onto TiO2 films and overall cell efficiency.

Ultrafast dynamics in multifunctional Ru(II)-loaded polymers for solar energy conversion.

The use of sunlight to make chemical fuels (i.e., solar fuels) is an attractive approach in the quest to develop sustainable energy sources. Using nature as a guide, assemblies for artificial photosynthesis will need to perform multiple functions. They will need to be able to harvest light across a broad region of the solar spectrum, transport excited-state energy to charge-separation sites, and then transport and store redox equivalents for use in the catalytic reactions that produce chemical fuels. This multifunctional behavior will require the assimilation of multiple components into a single macromolecular system. A wide variety of different architectures including porphyrin arrays, peptides, dendrimers, and polymers have been explored, with each design posing unique challenges. Polymer assemblies are attractive due to their relative ease of production and facile synthetic modification. However, their disordered nature gives rise to stochastic dynamics not present in more ordered assemblies. The rational design of assemblies requires a detailed understanding of the energy and electron transfer events that follow light absorption, which can occur on time scales ranging from femtoseconds to hundreds of microseconds, necessitating the use of sophisticated techniques. We have used a combination of time-resolved absorption and emission spectroscopies with observation times that span 9 orders of magnitude to follow the excited-state evolution within polymer-based molecular assemblies. We complement experimental observations with molecular dynamics simulations to develop a microscopic view of these dynamics. This Account provides an overview of our work on polymers decorated with pendant Ru(II) chromophores, both in solution and on surfaces. We have examined site-to-site energy transport among the Ru(II) complexes, and in systems incorporating π-conjugated polymers, we have observed ultrafast formation of a long-lived charge-separated state. When attached to TiO2, these assemblies exhibit multifunctional behavior in which photon absorption is followed by energy transport to the surface and electron injection to produce an oxidized metal complex. The oxidizing equivalent is then transferred to the conjugated polymer, giving rise to a long-lived charge-separated state.

Light-induced covalent immobilization of monolayers of magnetic nanoparticles on hydrogen-terminated silicon.

Specifically tailored ω-alkenyl-1-carboxylic acids were synthesized for use as surfactants in the single-step preparation of manganese ferrite (MnFe2O4) nanoparticles (NPs). Monodisperse manganese ferrite NPs terminated with ω-alkenyl moieties were prepared via a one-pot reaction at high temperature without the need of ligand exchange. Using this approach, simple adjustment of the rate of heating allowed precise tuning of the size of the nanoparticles, which were characterized in bulk form by transmission electron microscopy (TEM), Fourier-transform infrared (FT-IR) spectroscopy, and X-ray diffraction (XRD). These surfactant-coated magnetic nanoparticles were then deposited onto hydrogen-terminated silicon(111) wafers and covalently anchored to the surface by UV-initiated covalent bonding. Analysis by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) confirmed that the UV treatment led to covalent immobilization of the NPs on the silicon surface with a consistent packing density across the surface. The magnetic properties of the stable, surface-bound nanoparticle arrays were characterized using a superconducting quantum interference device (SQUID) magnetometer. The materials and methods described here are being developed for use in bit-patterned ultrahigh density magnetic recording media and nanoscale biomagnetic sensing.

Monolayer-protected gold nanoparticles prepared using long-chain alkanethioacetates.

This letter describes the preparation of monolayer-protected nanoparticle clusters (MPCs) from the adsorption of n-tetradecanethioacetate onto colloidal gold nanoparticles using the Brust-Schiffrin two-phase synthesis method. The MPCs were characterized by transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) spectroscopy, (1)H nuclear magnetic resonance (NMR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. These studies found that the monolayer coatings on the gold nanoparticles were nearly indistinct with regard to chemical composition, monolayer structure, and Au-S ligation when compared to those prepared from the analogous adsorption of n-tetradecanethiol (i.e., the thioacetate headgroup adsorbs to gold as a thiolate, with concurrent loss of the acetyl group). Under equivalent conditions of formation, however, the size of the gold nanoparticles formed was larger when using the alkanethioacetate adsorbate (e.g., 4.9 +/- 1.2 nm) compared to the alkanethiol adsorbate (e.g., 1.6 +/- 0.3 nm). The observed difference in size is rationalized on the basis of the stronger ligating ability of the thiol compared to that of the thioacetate during gold nanoparticle nucleation and/or growth. The use of alkanethioacetates affords significant control of particle size and allows the formation of MPCs with thiol-sensitive omega-functional groups.

Facile synthesis, assembly, and immobilization of ordered arrays of monodisperse magnetic nanoparticles on silicon substrates.

This paper outlines the preparation of monodisperse MnFe(2)O(4) nanoparticles modified with omega-alkenyl moieties in a one-pot reaction, requiring no ligand-exchange step, followed by deposition of the resulting surfactant-coated nanoparticles onto a hydrogen-terminated silicon (111) wafer and covalent anchoring to the surface via UV-initiated bonding, creating a stable two-dimensional array of monodisperse magnetic nanoparticles.

Rationally designed ligands that inhibit the aggregation of large gold nanoparticles in solution.

Hexadecanethiol (n-C16), 2,2-dimethylhexadecane-1-thiol (DMC16), and the multidentate thiol-based ligands 2-tetradecylpropane-1,3-dithiol (C16C2), 2-methyl-2-tetradecylpropane-1,3-dithiol (C16C3), and 1,1,1-tris(mercaptomethyl)pentadecane (t-C16) were evaluated for their ability to stabilize large gold nanoparticles (>15 nm) in organic solution. Citrate-stabilized gold nanoparticles (20-50 nm) treated with the ligands were extracted from aqueous solution and dispersed into toluene. The degree of aggregation of the gold nanoparticles was monitored visually and further confirmed by UV-vis spectroscopy and dynamic light scattering (DLS). The bidentate ligands (C16C2 and C16C3) and particularly the tridentate ligand (t-C16) showed enhanced abilities to inhibit the aggregation of large gold nanoparticles in organic solution. For gold nanoparticles modified with these multidentate ligands, bound thiolate (S2p3/2 binding energy of 162 eV) was the predominant sulfur species (>85%) as evaluated by X-ray photoelectron spectroscopy (XPS). Although an entropy-based resistance to ordering of the loosely packed surfactant layers was initially considered to be a plausible mechanism for the enhanced stabilization afforded by the multidentate ligands, when taken as a whole, the data presented here support a model in which the enhanced stabilization arises largely (if not solely) from the multidentate chelate effect.