Tuning the underwater adhesiveness of antibacterial polysaccharides complex coacervates.

HYPOTHESIS: Adjusting the water content and mechanical properties of polyelectrolyte coacervates for optimal underwater adhesion requires simultaneous control of the macromolecular design and the type and concentration of the salt used. Using synthetic or bio-inspired polymers to make coacervates often involves complicated chemistries and large variations in salt concentration. The underwater adhesiveness of simple, bio-sourced coacervates can be tuned with relatively small variations in salt concentration. Bio-sourced polymers can also impart beneficial biological activities to the final material. EXPERIMENTS: We made complex coacervates from charged chitosan (CHI) and hyaluronic acid (HA) with NaCl as the salt. Their water content and viscoelastic properties were investigated to identify the formulation with optimal underwater adhesion in physiological conditions. The coacervates were also studied in antibacterial and cytotoxicity experiments. FINDINGS: As predicted by linear rheology, the CHI-HA coacervates at 0.1 and 0.2 M NaCl had the highest pull-off adhesion strengths of 44.4 and 40.3 kPa in their respective supernatants. In-situ physical hardening of the 0.2 M coacervate upon a salt switch in 0.1 M NaCl resulted in a pull-off adhesion strength of 62.9 kPa. This material maintained its adhesive properties in physiological conditions. Finally, the optimal adhesive was found to be non-cytotoxic and inherently antimicrobial through a chitosan release-killing mechanism.

Interfacial rheology of linearly growing polyelectrolyte multilayers at the water-air interface: from liquid to solid viscoelasticity.

Despite the long history of investigations of polyelectrolyte multilayer formation on solid or liquid surfaces, important questions remain open concerning the construction of the first set of layers. These are generally deposited on a first anchoring layer of different chemistry, influencing their construction and properties. We propose here an in-depth investigation of the formation of NaPSS/PAH multilayers at the air/water interface in the absence of a chemically different anchoring layer, profiting from the surface activity of NaPSS. To analyse the mechanical properties of the different layers, we combine recently established analysis techniques of an inflating/deflating bubble exploiting simultaneous shape and pressure measurement: bubble shape elastometry, general stress decomposition and capillary meniscus dynanometry. We complement these measurements by interfacial shear rheology. The obtained results allow us to confirm, first of all, the strength of the aforementioned techniques to characterize complex interfaces with non-linear viscoelastic properties. Furthermore, their sensitivity allows us to show that the multilayer properties are highly sensitive to the temporal and mechanical conditions under which they are constructed and manipulated. We nevertheless identify a robust trend showing a clear transition from a liquid-like viscoelastic membrane to a solid-like viscoelastic membrane after the deposition of 5 layers. We interpret this as the number of layers required to create a fully connected multilayer, which is consistent with previous results obtained on solid or liquid interfaces.

PEG-in-PDMS drops stabilised by soft silicone skins as a model system for elastocapillary emulsions with explicit morphology control.

HYPOTHESIS: The morphology of ordinary macro-emulsions is controlled by their high interfacial energies, i.e., by capillarity, leading to well-known structural features which can be tuned only over a narrow range. We claim here that a more explicit control over a much wider range of morphologies can be obtained by producing "elastocapillary emulsions" in which interfacial elasticity acts simultaneously with interfacial tension. EXPERIMENTS: We develop a model-system composed of PEG-in-PDMS emulsions, in which a catalyst diffuses from the PEG drops into the silicone matrix containing two reactive silicone polymers, which are cross-linked in a non-reactive silicone matrix to form a silicone gel of controlled thickness and mechanical properties on the drop surface. We characterise the cross-linking process of the gel in bulk and at the interface, and we analyse the skin growth kinetics. We then use the obtained understanding to produce emulsions with controlled elastocapillary interfaces using in-flow-chemistry in a purpose-designed millifluidic circuit. FINDINGS: We show that this approach allows to create interfaces over the full range of elastocapillary properties, and that very different emulsion morphologies can be generated depending on whether capillarity or elasticity dominates. These findings advance our fundamental understanding of the morphology of emulsions with complex interfaces, and they are of importance for the design of polymerised High Internal Phase Emulsions (polyHIPEs) with original structure/property relations. They will also be useful for the design of silicone capsules with fine-tuned mechanical properties.

Investigation of an Organogel by Micro-Differential Scanning Calorimetry: Quantitative Relationship between the Shapes of the Thermograms and the Phase Diagram.

The phase diagrams of organogels are necessary for applications and fundamental aspects, for instance to understand their thermodynamics. Differential scanning calorimetry is one of the techniques implemented to map these diagrams. The thermograms of organogels upon heating show broad endotherms, increasing gradually to a maximum, at a temperature Tmax, and decreasing back to the baseline, sometimes 10 °C above. This broadening can lead to uncertainty in determining the molar enthalpies and the melting temperatures Tm of the gels. Herein, we have measured the thermograms of the 12-hydroxystearic acid/nitrobenzene gels for weight fractions ranging from 0.0015 to 0.04. Compared with transition temperatures measured by other techniques, the inflection points of the thermograms provide a measurement of Tm with less bias than Tmax. The phase diagram explains why the molar melting enthalpies derived from the thermograms for samples of low concentration are lower than expected. The shapes of the heat flows below the peak correlate quantitatively with the diagrams: after suitable correction and normalization, the integral curves superimpose with the phase diagram in their ascending branch and reach a plateau when the gel is fully melted. The shape of the thermograms upon cooling is also qualitatively explained within the frame of the diagrams.

Polysaccharide-covered nanoparticles with improved shell stability using click-chemistry strategies.

Dextran-covered PLA nanoparticles have been formulated by two strategies. On one hand, dextran-g-PLA copolymers have been synthesized by click-chemistry between azide-multifunctionalized dextran (DexN3) and alkyne end-functionalized PLA chains (α-alkyne PLA); then nanoprecipitated without any additional surfactants. On the other hand, DexN3 exhibiting surfactant properties have been emulsified with unfunctionalized or α-alkyne PLA, which are dissolved in organic phase with or without CuBr. Depending on the o/w emulsion/evaporation process experimental conditions, dextran-g-PLA copolymers have been produced in situ, by click chemistry at the liquid/liquid interface during the emulsification step. Whatever the process, biodegradable core/shell polymeric nanoparticles have been obtained, then characterized. Colloidal stability of these nanoparticles in the presence of NaCl or SDS has been studied. While the physically adsorbed polysaccharide based shell has been displaced by SDS, the covalently-linked polysaccharide based shell ensures a permanent stability, even in the presence of SDS.