RESUMEN
Organic light-emitting diodes (OLEDs) are promising lighting solutions for sustainability and energy efficiency. Incorporating thermally activated delayed fluorescence (TADF) molecules enables OLEDs to achieve internal quantum efficiency (IQE), in principle, up to 100%; therefore, new classes of promising TADF emitters and modifications of existing ones are sought after. This study explores the TADF emission properties of six designed TADF emitters, examining their photophysical responses using experimental and theoretical methods. The design strategy involves creating six distinct types of a donor-acceptor (D-A) system, where tert-butylcarbazoles are used as donors, while the acceptor component incorporates three different functional groups: nitrile, tetrazole and oxadiazole, with varying electron-withdrawing character. Additionally, the donor-acceptor distance is adjusted using a phenylene spacer, and its influence on TADF functionality is examined. The clear dependency of an additional spacer, inhibiting TADF, could be revealed. Emitters with a direct donor-acceptor connection are demonstrated to exhibit TADF moderate emissive behavior. The analysis emphasizes the impact of charge transfer, singlet-triplet energy gaps (ΔEST), and other microscopic parameters on photophysical rates, permitting TADF. Among the emitters, TCz-CN shows optimal performance as a blue-green emitter with an 88% photoluminescence quantum yield (PLQY) and fast rate of reversible intersystem crossing of 2x106 s-1.
RESUMEN
Optical interference filters (OIFs) are vital components for a wide range of optical and photonic systems. They are pivotal in controlling spectral transmission and reflection upon demand. OIFs rely on optical interference of the incident wave at multilayers, which are fabricated with nanometer precision. Here, we demonstrate that these requirements can be fulfilled by inkjet printing. This versatile technology offers a high degree of freedom in manufacturing, as well as cost-affordable and rapid-prototyping features from the micron to the meter scale. In this work, via rational ink design and formulation, OIFs were fully inkjet printed in ambient conditions. Longpass, shortpass, bandpass, and dichroic OIFs were fabricated, and precise control of the spectral response in OIFs was realized. Subsequently, customized lateral patterning of OIFs by inkjet printing was achieved. Furthermore, upscaling of the printed OIFs to A4 size (29.7 × 21.0 cm²) was demonstrated.
RESUMEN
Flexible thermoelectric devices show great promise as sustainable power units for the exponentially increasing self-powered wearable electronics and ultra-widely distributed wireless sensor networks. While exciting proof-of-concept demonstrations have been reported, their large-scale implementation is impeded by unsatisfactory device performance and costly device fabrication techniques. Here, we develop Ag2Se-based thermoelectric films and flexible devices via inkjet printing. Large-area patterned arrays with microscale resolution are obtained in a dimensionally controlled manner by manipulating ink formulations and tuning printing parameters. Printed Ag2Se-based films exhibit (00 l)-textured feature, and an exceptional power factor (1097 µWm-1K-2 at 377 K) is obtained by engineering the film composition and microstructure. Benefiting from high-resolution device integration, fully inkjet-printed Ag2Se-based flexible devices achieve a record-high normalized power (2 µWK-2cm-2) and superior flexibility. Diverse application scenarios are offered by inkjet-printed devices, such as continuous power generation by harvesting thermal energy from the environment or human bodies. Our strategy demonstrates the potential to revolutionize the design and manufacture of multi-scale and complex flexible thermoelectric devices while reducing costs, enabling them to be integrated into emerging electronic systems as sustainable power sources.
RESUMEN
Perovskite nanocrystals (PNCs) bear a huge potential for widespread applications, such as color conversion, X-ray scintillators, and active laser media. However, the poor intrinsic stability and high susceptibility to environmental stimuli including moisture and oxygen have become bottlenecks of PNC materials for commercialization. Appropriate barrier material design can efficiently improve the stability of the PNCs. Particularly, the strategy for packaging PNCs in organosilicon matrixes can integrate the advantages of inorganic-oxide-based and polymer-based encapsulation routes. However, the inert long-carbon-chain ligands (e.g., oleic acid, oleylamine) used in the current ligand systems for silicon-based encapsulation are detrimental to the cross-linking of the organosilicon matrix, resulting in performance deficiencies in the nanocrystal films, such as low transparency and large surface roughness. Herein, we propose a dual-organosilicon ligand system consisting of (3-aminopropyl)triethoxysilane (APTES) and (3-aminopropyl)triethoxysilane with pentanedioic anhydride (APTES-PA), to replace the inert long-carbon-chain ligands for improving the performance of organosilicon-coated PNC films. As a result, strongly fluorescent PNC films prepared by a facile solution-casting method demonstrate high transparency and reduced surface roughness while maintaining high stability in various harsh environments. The optimized PNC films were eventually applied in an X-ray imaging system as scintillators, showing a high spatial resolution above 20 lp/mm. By designing this promising dual organosilicon ligand system for PNC films, our work highlights the crucial influence of the molecular structure of the capping ligands on the optical performance of the PNC film.
RESUMEN
Highly sensitive microfiber strain sensors are promising for the detection of mechanical deformations in applications where limited space is available. In particular for in situ battery thickness monitoring where high resolution and low detection limit are key requirements. Herein, the realization of a highly sensitive strain sensor for in situ lithium-ion (Li-ion) battery thickness monitoring is presented. The compliant fiber-shaped sensor is fabricated by an upscalable wet-spinning method employing a composite of microspherical core-shell conductive particles embedded in an elastomer. The electrical resistance of the sensor changes under applied strain, exhibiting a high strain sensitivity and extremely low strain detection limit of 0.00005 with high durability of 10 000 cycles. To demonstrate the accuracy and ease of applicability of this sensor, the real-time thickness change of a Li-ion battery pouch cell is monitored during the charge and discharge cycles. This work introduces a promising approach with the least material complexity for soft microfiber strain gauges.
RESUMEN
Perovskite gain materials can sustain continuous-wave lasing at room-temperature. A first step toward the unachieved goal of electrically excited lasing would be an improvement in gain when electrical stimulation is added to the optical. However, to date, electrical stimulation supplementing optical has reduced gain performance. We find that amplified spontaneous emission (ASE) in a CsPbBr3 perovskite light-emitting diode (LED) held under invariant subthreshold optical excitation can be turned on/off by the addition/removal of an electric field. A positive bias voltage leads to a factor of 3 reduction in the optical ASE threshold, the cause of which can be attributed to an enhancement of the radiative rate. The slow components (10 s time scale) of the modulation in the photoluminescence and ASE when the voltage is changed suggest that the relocation of mobile ions trigger the increased radiative rate and observed lowering of ASE thresholds.
RESUMEN
To date, thermal nanoimprint lithography (NIL) for patterning hybrid perovskites has always involved an intricate etching step of a hard stamp material or its master. Here, we demonstrate for the first time the successful nanopatterning of a perovskite film by NIL with a low-cost polymeric stamp. The stamp consists of a dichromated gelatin grating structured by holographic lithography. The one-dimensional grating is imprinted into a perovskite film at 95 °C and 90 MPa for 10 min, resulting in a high quality second-order distributed feedback (DFB) laser. The laser exhibits an excellent performance with a threshold of 81 µJ/cm2, a line width of 0.32 nm, and a pronounced linear polarization. This novel approach enables cost-effective fabrication of high-quality DFB lasers compatible with different perovskite compositions and photonic nanostructures for a wide range of applications.
RESUMEN
The thermoelectric generator (TEG) shows great promise for energy harvesting and waste heat recovery applications. Cost barriers for this technology could be overcome by using printing technologies. However, the development of thermoelectric (TE) materials that combine printability, high-efficiency, and mechanical flexibility is a serious challenge. Here, flexible (SbBi)2 (TeSe)3 -based screen-printed TE films exhibiting record-high figure of merits (ZT) and power factors are reported. A high power factor of 24 µW cm-1 K-2 (ZTmax ≈ 1.45) for a p-type film and a power factor of 10.5 µW cm-1 K-2 (ZTmax ≈ 0.75) for an n-type film are achieved. The TE inks, comprised of p-Bi0.5 Sb1.5 Te3 (BST)/n-Bi2 Te2.7 Se0.3 (BT) and a Cu-Se-based inorganic binder (IB), are prepared by a one-pot synthesis process. The TE inks are printed on different substrates and sintered using photonic-curing leading to the formation of a highly conducting ß-Cu2- δ Se phase that connects "microsolders," the grains resulting in high-performance. Folded TEGs (f-TEGs) are fabricated using the materials. A half-millimeter thick f-TEG exhibits an open-circuit voltage (VOC ) of 203 mV with a maximum power density (pmax ) of 5.1 W m-2 at ∆T = 68 K. This result signifies that a few millimeters thick f-TEG could power Internet-of-Things (IoTs) devices converting low-grade heat to electricity.
RESUMEN
Fully-printed temperature sensor arrays-based on a flexible substrate and featuring a high spatial-temperature resolution-are immensely advantageous across a host of disciplines. These range from healthcare, quality and environmental monitoring to emerging technologies, such as artificial skins in soft robotics. Other noteworthy applications extend to the fields of power electronics and microelectronics, particularly thermal management for multi-core processor chips. However, the scope of temperature sensors is currently hindered by costly and complex manufacturing processes. Meanwhile, printed versions are rife with challenges pertaining to array size and sensor density. In this paper, we present a passive matrix sensor design consisting of two separate silver electrodes that sandwich one layer of sensing material, composed of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS). This results in appreciably high sensor densities of 100 sensor pixels per cm[Formula: see text] for spatial-temperature readings, while a small array size is maintained. Thus, a major impediment to the expansive application of these sensors is efficiently resolved. To realize fast and accurate interpretation of the sensor data, a neural network (NN) is trained and employed for temperature predictions. This successfully accounts for potential crosstalk between adjacent sensors. The spatial-temperature resolution is investigated with a specially-printed silver micro-heater structure. Ultimately, a fairly high spatial temperature prediction accuracy of 1.22 °C is attained.
RESUMEN
Bragg mirrors are widely applied in optical and photonic devices due to their capability of light management. However, the fabrication of Bragg mirrors is mainly accomplished by physical and chemical vapor deposition processes, which are costly and do not allow for lateral patterning. Here, the fabrication of Bragg mirrors by fully inkjet printing is reported. The photonic bandgap of Bragg mirrors is tailored by adjusting the number of bilayers in the stack and the layer thickness via simply varying printing parameters. An ultrahigh reflectance of 99% is achieved with the devices consisting of ten bilayers only, and the central wavelength of Bragg mirrors is tuned from visible into near-infrared wavelength range. Inkjet printing allows for fabricating Bragg mirrors on various substrates (e.g., glass and foils), in different sizes and variable lateral patterns. The printed Bragg mirrors not only exhibit a high reflection at designed wavelengths but also show an outstanding homogeneity in color over a large area. The approach thus enables additive manufacturing for various applications ranging from microscale photonic elements to enhanced functionality and aesthetics in large-area displays and solar technologies.
RESUMEN
It has been a challenge to obtain high electrical conductivity in inorganic printed thermoelectric (TE) films due to their high interfacial resistance. In this work, we report a facile synthesis process of Cu-Se-based printable ink for screen printing. A highly conducting TE ß-Cu2-δSe phase forms in the screen-printed Cu-Se-based film through ≤10 ms sintering using photonic-curing technology, minimizing the interfacial resistance. This enables overcoming the major challenges associated with printed thermoelectrics: (a) to obtain the desired phase, (b) to attain high electrical conductivity, and (c) to obtain flexibility. Furthermore, the photonic-curing process reduces the synthesis time of the TE ß-Cu2-δSe film from several days to a few milliseconds. The sintered film exhibits a remarkably high electrical conductivity of â¼3710 S cm-1 with a TE power factor of â¼100 µW m-1 K-2. The fast processing and high conductivity of the film could also be potentially useful for different printed electronics applications.
RESUMEN
Defect states are known to trigger trap-assisted nonradiative recombination, restricting the performance of perovskite solar cells (PSCs). Here, we investigate the trap states in long-term thermally stressed methylammonium lead iodide (MAPbI3) perovskite thin films over 500 h at 85 °C employing thermally stimulated current measurements. A prominent deep trap level was detected with an activation energy of â¼0.459 eV in MAPbI3 without being thermally stressed. Interestingly, upon the application of thermal stress, an additional deep trap level of activation energy â¼0.414 eV emerges and grows with thermal stress duration. After 500 h of thermal stress, the trap density was â¼1016 cm-3. The trend of open-circuit voltage loss was in line with the trap density variation with thermal stress time, which elucidates the enhanced nonradiative recombination through these trap states. This work opens a path to understanding the mechanism behind long-term thermal instability and further inspires the development of strategies to minimize trap formation in PSCs.
RESUMEN
It has been a substantial challenge to develop a printed thermoelectric (TE) material with a figure-of-merit ZT > 1. In this work, high ZT p-type Bi0.5Sb1.5Te3-based printable TE materials have been advanced by interface modification of the TE grains with a nonstoichiometric ß-Cu2-δSe-based inorganic binder (IB) through a facile printing-sintering process. As a result, a very high TE power factor of â¼17.5 µW cm-1 K-2 for a p-type printed material is attained in the optimized compounds at room temperature (RT). In addition, a high ZT of â¼1.2 at RT and of â¼1.55 at 360 K is realized using thermal conductivity (κ) of a pellet made of the prepared printable material containing 10 wt % of IB. Using the same material for p-type TE legs and silver paste for n-type TE legs, a printed TE generator (print-TEG) of four thermocouples has been fabricated for demonstration. An open-circuit voltage (VOC) of 14 mV and a maximum power output (Pmax) of 1.7 µW are achieved for ΔT = 40 K for the print-TEG.
RESUMEN
While various nanophotonic structures applicable to relatively thin crystalline silicon-based solar cells were proposed to ensure effective light in-coupling and light trapping in the absorber, it is of great importance to evaluate their performance on the solar module level under realistic irradiation conditions. Here, we analyze the annual energy yield of relatively thin (crystalline silicon (c-Si) wafer thickness between 5 µm and 80 µm) heterojunction (HJT) solar module architectures when optimized anti-reflective and light trapping titanium dioxide (TiO2) nanodisk square arrays are applied on the front and rear cell interfaces, respectively. Our numerical study shows that upon reducing c-Si wafer thickness down to 5 µm, the relative increase of the annual energy yield can go up to 23.3 %rel and 43.0 %rel for mono- and bifacial solar modules, respectively, when compared to the reference modules with flat optimized anti-reflective coatings of HJT solar cells.
RESUMEN
Narrow-band gap (NBG) Sn-Pb perovskites with band gaps of â¼1.2 eV, which correspond to a broad photon absorption range up to â¼1033 nm, are highly promising candidates for bottom solar cells in all-perovskite tandem photovoltaics. To exploit their potential, avoiding optical losses in the top layer stacks of the tandem configuration is essential. This study addresses this challenge in two ways (1) removing the hole-transport layer (HTL) and (2) implementing highly transparent hydrogen-doped indium oxide In2O3:H (IO:H) electrodes instead of the commonly used indium tin oxide (ITO). Removing HTL reduces parasitic absorption loss in shorter wavelengths without compromising the photovoltaic performance. IO:H, with an ultra-low near-infrared optical loss and a high charge carrier mobility, results in a remarkable increase in the photocurrent of the semitransparent top and (HTL-free) NBG bottom perovskite solar cells when substituted for ITO. As a result, an IO:H-based four-terminal all-perovskite tandem solar cell (4T all-PTSCs) with a power conversion efficiency (PCE) as high as 24.8% is demonstrated, outperforming ITO-based 4T all-PTSCs with PCE up to 23.3%.
RESUMEN
A composite material of plasmonic nanoparticles embedded in a scaffold of nano-porous silicon offers unmatched capabilities for use as a SERS substrate. The marriage of these components presents an exclusive combination of tightly focused amplification of Localised Surface Plasmon (LSP) fields inside the material with an extremely high surface-to-volume ratio. This provides favourable conditions for a single molecule or extremely low concentration detection by SERS. In this work the advantage of the composite is demonstrated by SERS detection of Methylene Blue at a concentration as low as a few picomolars. We systematically investigate the plasmonic properties of the material by imaging its morphology, establishing its composition and the effect on the LSP resonance optical spectra.
RESUMEN
The spontaneous phase separation of two or more polymers is a thermodynamic process that can take place in both biological and synthetic materials and which results in the structuring of the matter from the micro- to the nanoscale. For photonic applications, it allows forming quasi-periodic or disordered assemblies of light scatterers at high throughput and low cost. The wet process methods currently used to fabricate phase-separated nanostructures (PSNs) limit the design possibilities, which in turn hinders the deployment of PSNs in commercialized products. To tackle this shortcoming, we introduce a versatile and industrially scalable deposition method based on the inkjet printing of a polymer blend, leading to PSNs with a feature size that is tuned from a few micrometers down to sub-100 nm. Consequently, PSNs can be rapidly processed into the desired macroscopic design. We demonstrate that these printed PSNs can improve light management in manifold photonic applications, exemplified here by exploiting them as a light extraction layer and a metasurface for light-emitting devices and point-of-care biosensors, respectively.
RESUMEN
One of the great challenges of hybrid organic-inorganic perovskite photovoltaics is the material's stability at elevated temperatures. Over the past years, significant progress has been achieved in the field by compositional engineering of perovskite semiconductors, e.g., using multiple-cation perovskites. However, given the large variety of device architectures and nonstandardized measurement protocols, a conclusive comparison of the intrinsic thermal stability of different perovskite compositions is missing. In this work, we systematically investigate the role of cation composition on the thermal stability of perovskite thin films. The cations in focus of this study are methylammonium (MA), formamidinium (FA), cesium, and the most common mixtures thereof. We compare the thermal degradation of these perovskite thin films in terms of decomposition, optical losses, and optoelectronic changes when stressed at 85 °C for a prolonged time. Finally, we demonstrate the effect of thermal stress on perovskite thin films with respect to their performance in solar cells. We show that all investigated perovskite thin films show signs of degradation under thermal stress, though the decomposition is more pronounced in methylammonium-based perovskite thin films, whereas the stoichiometry in methylammonium-free formamidinium lead iodide (FAPbI3) and formamidinium cesium lead iodide (FACsPbI3) thin films is much more stable. We identify compositions of formamidinium and cesium to result in the most stable perovskite compositions with respect to thermal stress, demonstrating remarkable stability with no decline in power conversion efficiency when stressed at 85 °C for 1000 h. Thereby, our study contributes to the ongoing quest of identifying the most stable perovskite compositions for commercial application.
RESUMEN
Recently, continuous-wave (CW) lasing was demonstrated at room temperature in quasi-2D perovskites. For 3D films, CW lasing at room temperature remains challenging. Issues hampering 3D materials include the temperature dependence of the (a) distribution of carrier energies, (b) buildup of photoinduced nonradiative channels, and (c) rates of bimolecular versus Auger recombination. We study the latter in a phase-stable 3D perovskite using high-index substrates to completely suppress amplified spontaneous emission (ASE). The bimolecular recombination coefficient decreases from 80 to 290 K (from (6.4 to 1.1) × 10-10 cm-3 s-1), whereas the Auger coefficient stays constant at 3 × 10-29 cm-6 s-1. Above 250 K, the Auger rate exceeds the bimolecular rate at carrier densities corresponding to the ASE threshold. At lower temperatures, the decrease in the bimolecular rate coefficient with increasing temperature and the fraction of photoluminescence in the ASE band determine the temperature dependence of the ASE threshold.
RESUMEN
Many insect species rely on the polarization properties of object-reflected light for vital tasks like water or host detection. Unfortunately, typical glass-encapsulated photovoltaic modules, which are expected to cover increasingly large surfaces in the coming years, inadvertently attract various species of water-seeking aquatic insects by the horizontally polarized light they reflect. Such polarized light pollution can be extremely harmful to the entomofauna if polarotactic aquatic insects are trapped by this attractive light signal and perish before reproduction, or if they lay their eggs in unsuitable locations. Textured photovoltaic cover layers are usually engineered to maximize sunlight-harvesting, without taking into consideration their impact on polarized light pollution. The goal of the present study is therefore to experimentally and computationally assess the influence of the cover layer topography on polarized light pollution. By conducting field experiments with polarotactic horseflies (Diptera: Tabanidae) and a mayfly species (Ephemeroptera: Ephemera danica), we demonstrate that bioreplicated cover layers (here obtained by directly copying the surface microtexture of rose petals) were almost unattractive to these species, which is indicative of reduced polarized light pollution. Relative to a planar cover layer, we find that, for the examined aquatic species, the bioreplicated texture can greatly reduce the numbers of landings. This observation is further analyzed and explained by means of imaging polarimetry and ray-tracing simulations. The results pave the way to novel photovoltaic cover layers, the interface of which can be designed to improve sunlight conversion efficiency while minimizing their detrimental influence on the ecology and conservation of polarotactic aquatic insects.