Multi-functional anodes boost the transient power and durability of proton exchange membrane fuel cells.

Proton exchange membrane fuel cells have been regarded as the most promising candidate for fuel cell vehicles and tools. Their broader adaption, however, has been impeded by cost and lifetime. By integrating a thin layer of tungsten oxide within the anode, which serves as a rapid-response hydrogen reservoir, oxygen scavenger, sensor for power demand, and regulator for hydrogen-disassociation reaction, we herein report proton exchange membrane fuel cells with significantly enhanced power performance for transient operation and low humidified conditions, as well as improved durability against adverse operating conditions. Meanwhile, the enhanced power performance minimizes the use of auxiliary energy-storage systems and reduces costs. Scale fabrication of such devices can be readily achieved based on the current fabrication techniques with negligible extra expense. This work provides proton exchange membrane fuel cells with enhanced power performance, improved durability, prolonged lifetime, and reduced cost for automotive and other applications.

DFT simulation of the X-ray diffraction pattern of aluminum-ion-intercalated graphite used as the cathode material of the aluminum-ion battery.

Many breakthroughs have been achieved in rechargeable aluminum-ion battery technologies in recent years. Most recently, operando X-ray diffraction (XRD) combined with density functional theory (DFT) calculations was reported to study the chloroaluminate anion (AlCl4-)-intercalated graphite cathode of the battery. However, there are quite a few discrepancies between the measured and simulated XRD patterns. This work is focused on the simulation of XRD patterns of graphite intercalation compounds (GICs) with DFT calculations. Our results reveal that both the geometry of AlCl4- in graphite and the gallery height of GICs are dependent on the intercalant density. At low intercalant density, the gallery height keeps constant, but at high intercalant densities, the gallery height is linearly related to the intercalant density. Our simulated XRD patterns are highly consistent with the measured operando XRD patterns. Not only do the angles of the peaks match very well, but also the relative intensities and the corresponding electrode capacities show reasonable agreement with the experimental results. The DFT simulation of the XRD pattern provides significant information on the stage index and the charge capacity of the GIC electrode.

A nonaqueous all organic semisolid flow battery.

We report the first proof of concept for a nonaqueous, all-organic semisolid flow battery (SSFB) using suspensions of 10-methylphenothiazine@Ketjen black and thioxanthone@Ketjen black dispersed in tetraethylammonium hexafluorophosphate/acetonitrile as the cathode and anode, respectively. A proof of principle cell with an open circuit voltage of 2.35 V demonstrated an average coulombic efficiency of 83% within the voltage range 3.0-0 V. This study provides a potential path for developing new high energy density and cost-effective nonaqueous organic SSFBs.

Enhanced carbon dioxide electrolysis at redox manipulated interfaces.

Utilization of carbon dioxide from industrial waste streams offers significant reductions in global carbon dioxide emissions. Solid oxide electrolysis is a highly efficient, high temperature approach that reduces polarization losses and best utilizes process heat; however, the technology is relatively unrefined for currently carbon dioxide electrolysis. In most electrochemical systems, the interface between active components are usually of great importance in determining the performance and lifetime of any energy materials application. Here we report a generic approach of interface engineering to achieve active interfaces at nanoscale by a synergistic control of materials functions and interface architectures. We show that the redox-manipulated interfaces facilitate the atomic oxygen transfer from adsorbed carbon dioxide molecules to the cathode lattice that determines carbon dioxide electrolysis at elevated temperatures. The composite cathodes with in situ grown interfaces demonstrate significantly enhanced carbon dioxide electrolysis and improved durability.

Highly efficient electrochemical reforming of CH4/CO2 in a solid oxide electrolyser.

Reforming CH4 into syngas using CO2 remains a fundamental challenge due to carbon deposition and nanocatalyst instability. We, for the first time, demonstrate highly efficient electrochemical reforming of CH4/CO2 to produce syngas in a solid oxide electrolyser with CO2 electrolysis in the cathode and CH4 oxidation in the anode. In situ exsolution of an anchored metal/oxide interface on perovskite electrode delivers remarkably enhanced coking resistance and catalyst stability. In situ Fourier transform infrared characterizations combined with first principle calculations disclose the interface activation of CO2 at a transition state between a CO2 molecule and a carbonate ion. Carbon removal at the interfaces is highly favorable with electrochemically provided oxygen species, even in the presence of H2 or H2O. This novel strategy provides optimal performance with no obvious degradation after 300 hours of high-temperature operation and 10 redox cycles, suggesting a reliable process for conversion of CH4 into syngas using CO2.

LiCoPO4 cathode from a CoHPO4·xH2O nanoplate precursor for high voltage Li-ion batteries.

A highly crystalline LiCoPO4/C cathode material has been synthesized without noticeable impurities via a single step solid-state reaction using CoHPO4·xH2O nanoplate as a precursor obtained by a simple precipitation route. The LiCoPO4/C cathode delivered a specific capacity of 125 mAhg(-1) at a charge/discharge rate of C/10. The nanoplate precursor and final LiCoPO4/C cathode have been characterized using X-ray diffraction, thermogravimetric analysis - differential scanning calorimetry (TGA-DSC), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) and the electrochemical cycling stability has been investigated using different electrolytes, additives and separators.

Controlling porosity in lignin-derived nanoporous carbon for supercapacitor applications.

Low-cost renewable lignin has been used as a precursor to produce porous carbons. However, to date, it has not been easy to obtain high surface area porous carbon without activation processes or templating agents. Here, we demonstrate that low molecular weight lignin yields highly porous carbon with more graphitization through direct carbonization without additional activation processes or templating agents. We found that molecular weight and oxygen consumption during carbonization are critical factors to obtain high surface area, graphitized porous carbons. This highly porous carbon from low-cost renewable lignin sources is a good candidate for supercapacitor electrode materials.

Liquid-metal electrode to enable ultra-low temperature sodium-beta alumina batteries for renewable energy storage.

Commercial sodium-sulphur or sodium-metal halide batteries typically need an operating temperature of 300-350 °C, and one of the reasons is poor wettability of liquid sodium on the surface of beta alumina. Here we report an alloying strategy that can markedly improve the wetting, which allows the batteries to be operated at much lower temperatures. Our combined experimental and computational studies suggest that addition of caesium to sodium can markedly enhance the wettability. Single cells with Na-Cs alloy anodes exhibit great improvement in cycling life over those with pure sodium anodes at 175 and 150 °C. The cells show good performance even at as low as 95 °C. These results demonstrate that sodium-beta alumina batteries can be operated at much lower temperatures with successfully solving the wetting issue. This work also suggests a strategy to use liquid metals in advanced batteries that can avoid the intrinsic safety issues associated with dendrite formation.

In situ one-step synthesis of hierarchical nitrogen-doped porous carbon for high-performance supercapacitors.

A hierarchically structured nitrogen-doped porous carbon is prepared from a nitrogen-containing isoreticular metal-organic framework (IRMOF-3) using a self-sacrificial templating method. IRMOF-3 itself provides the carbon and nitrogen content as well as the porous structure. For high carbonization temperatures (950 °C), the carbonized MOF required no further purification steps, thus eliminating the need for solvents or acid. Nitrogen content and surface area are easily controlled by the carbonization temperature. The nitrogen content decreases from 7 to 3.3 at % as carbonization temperature increases from 600 to 950 °C. There is a distinct trade-off between nitrogen content, porosity, and defects in the carbon structure. Carbonized IRMOFs are evaluated as supercapacitor electrodes. For a carbonization temperature of 950 °C, the nitrogen-doped porous carbon has an exceptionally high capacitance of 239 F g(-1). In comparison, an analogous nitrogen-free carbon bears a low capacitance of 24 F g(-1), demonstrating the importance of nitrogen dopants in the charge storage process. The route is scalable in that multi-gram quantities of nitrogen-doped porous carbons are easily produced.

Multi-electron redox reaction of an organic radical cathode induced by a mesopore carbon network with nitroxide polymers.

An organic radical based composite cathode comprised of poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl methacrylate) (PTMA)-Ketjenblack was developed by a simple solvent-less electrode fabrication method. The composite cathode demonstrated a two-electron redox reaction of PTMA that is from an aminoxy anion (n-type) via a radical to an oxoammonium cation (p-type) with the corresponding redox potential at 2.8-3.1 V and 3.5-3.7 V vs. Li/Li(+) when evaluated in lithium half cells. Moreover, the PTMA-Ketjenblack composite electrode exhibits fast electrode reaction kinetics and an enhanced solid electrolyte interface by cyclic voltammetry and electrochemical impedance spectroscopy measurements. These improved electrochemical properties contribute to increased capacity (300 mA h g(-1)), a high rate (50% capacity retention after 100 C rate excursions) and a long cycle life in the cell performance evaluations. Morphological and compositional characterization indicates a unique mesopore network of Ketjenblack with the PTMA matrix, which highly facilitates the interaction between the conductive media and the radical species, resulting in the performance enhancement of the PTMA-Ketjenblack composite cathode.

Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries.

A functionalized graphene sheet-sulfur (FGSS) nanocomposite was synthesized as the cathode material for lithium-sulfur batteries. The structure has a layer of functionalized graphene sheets/stacks (FGS) and a layer of sulfur nanoparticles creating a three-dimensional sandwich-type architecture. This unique FGSS nanoscale layered composite has a high loading (70 wt%) of active material (S), a high tap density of ∼0.92 g cm(-3), and a reversible capacity of ∼505 mAh g(-1) (∼464 mAh cm(-3)) at a current density of 1680 mA g(-1) (1C). When coated with a thin layer of cation exchange Nafion film, the migration of dissolved polysulfide anions from the FGSS nanocomposite was effectively reduced, leading to a good cycling stability of 75% capacity retention over 100 cycles. This sandwich-structured composite conceptually provides a new strategy for designing electrodes in energy storage applications.

High-throughput screening of selectivity of melt polymerization catalysts using fluorescence spectroscopy and two-wavelength fluorescence imaging.

A new general approach for rapid assessment of polymerization catalysts is introduced. Native fluorescence emission of solid polymers is measured directly in combinatorial 96-microreactor arrays and polymers produced in a laboratory-scale validation reactor. Fluorescence features collected with a CCD-based spectrofluorometer are correlated with chemical properties of interest such as polymer molecular weight, amount of branching, and catalyst selectivity. The approach is illustrated by screening of selectivity of melt polymerization catalysts used in synthesis of an aromatic bisphenol A polycarbonate. Selectivity of catalysts correlated with the ratio of fluorescence intensities at 400 and 500 nm at 340-nm excitation. The relative standard deviation (RSD) in spectroscopic serial measurements was 1-12.5%. This spread included instrument variability (< or = 1% RSD) and sample inhomogeneity. Parallel quantitative screening of catalyst selectivity in combinatorial 96-microreactor arrays was performed as a two-wavelength ratiometric fluorescence imaging through 400- and 500-nm interference filters and showed a good correlation (R2 = 0.994) with serial screening. Our approach is an attractive alternative to traditional separation-based techniques if speed and nondestructive nature of analysis are critical and when the high cross-linking or solvent resistance of polymers complicates traditional analysis.

Fluorescence spectroscopy and multivariate spectral descriptor analysis for high-throughput multiparameter optimization of polymerization conditions of combinatorial 96-microreactor arrays.

Selection of optimum process conditions in combinatorial microreactors is essential if the combinatorial synthesis process is to be correlated with the synthesis process on a more conventional scale and the materials are to have the desired chemical properties. We have developed a new methodology for the high-throughput multiparameter optimization of polymerization reaction conditions in arrays of microreactors. Our strategy is based on the application of nondestructive spectroscopic techniques to measure chemical properties of polymers directly in individual microreactors followed by the multivariate spectral descriptor analysis for rapid determination of the optimal process conditions. We have demonstrated our strategy in the high-throughput multiparameter optimization of process conditions in thin-film melt polymerization reactions performed in 96-microreactor arrays for combinatorial screening of new polymerization catalysts. The combinatorial polymerization system was optimized for the best processing parameters using a set of input variables that included reactant parameters (relative amounts of starting components and catalyst loading) and processing variables (reaction time, reaction temperature, and inert gas flow rate). The measured output parameters were the chemical properties of materials and reproducibility of the material formation in replicate polymerizations in microreactors. Spatially resolved nondestructive evaluation of polymer formation was performed directly in individual microreactors and provided information about the spatial homogeneity of polymers in microreactors. It showed to be another powerful indicator of the reproducible polymerization process on the combinatorial scale. Although the methodology described here was implemented for high-throughput optimization of polymerization conditions, it is more general and can be further implemented for a variety of applications in which optimization of process parameters can be studied in situ or off-line using spectroscopic and other tools.

Reaction of silicate minerals to form tetramethoxysilane.

Several silicon dioxide sources were used as reagents in the base-mediated reaction with dimethyl carbonate (DMC) to make tetramethoxysilane (Q'). Several commercially available diatomaceous earth materials were investigated. High throughput screening was employed to explore over 200 silicate rocks and minerals as alternative silicon dioxide sources for formation of Q' from DMC and base. Amorphous silicon dioxide materials are effective reagents for the Q' forming reaction. Effective silicon dioxide sources in addition to the diatomaceous earth materials include opal and various synthetic silicates (Li, Co, and Ca).