Lignin Hydrogenolysis: Phenolic Monomers from Lignin and Associated Phenolates across Plant Clades.

The chemical complexity of lignin remains a major challenge for lignin valorization into commodity and fine chemicals. A knowledge of the lignin features that favor its valorization and which plants produce such lignins can be used in plant selection or to engineer them to produce lignins that are more ideally suited for conversion. Sixteen biomass samples were compositionally surveyed by NMR and analytical degradative methods, and the yields of phenolic monomers following hydrogenolytic depolymerization were assessed to elucidate the key determinants controlling the depolymerization. Hardwoods, including those incorporating monolignol p-hydroxybenzoates into their syringyl/guaiacyl copolymeric lignins, produced high monomer yields by hydrogenolysis, whereas grasses incorporating monolignol p-coumarates and ferulates gave lower yields, on a lignin basis. Softwoods, with their more condensed guaiacyl lignins, gave the lowest yields. Lignins with a high syringyl unit content released elevated monomer levels, with a high-syringyl polar transgenic being particularly striking. Herein, we distinguish phenolic monomers resulting from the core lignin vs those from pendent phenolate esters associated with the biomass cell wall, acylating either polysaccharides or lignins. The basis for these observations is rationalized as a means to select or engineer biomass for optimal conversion to worthy phenolic monomers.

Energy-Resolved Mass Spectrometry as a Tool for Identification of Lignin Depolymerization Products.

Lignin is the largest source of bio-based aromatic compounds in nature, and its valorization is essential to the sustainability of lignocellulosic biorefining. Characterizing lignin-derived compounds remains challenging due to the heterogeneity of this biopolymer. Tandem mass spectrometry is a promising tool for lignin structural analytics, as fragmentation patterns of model compounds can be extrapolated to identify characteristic moieties in complex samples. This work extended previous resonance excitation-type collision-induced dissociation (CID) methods that identified lignin oligomers containing ß-O-4, ß-5, and ß-ß bonds, to also identify characteristics of 5-5, ß-1, and 4-O-5 dimers, enabled by quadrupole time-of-flight (QTOF) CID with energy-resolved mass spectrometry (ERMS). Overall, QTOF-ERMS offers in-depth structural information and could ultimately contribute to tools for high-throughput lignin dimer identification.

Mechanistic Study of Diaryl Ether Bond Cleavage during Palladium-Catalyzed Lignin Hydrogenolysis.

Hydrogenolysis has emerged as one of the most effective means of converting polymeric lignin into monoaromatic fragments of value. Reported yields may be higher than for other methods and can exceed the theoretical yields estimated from measures of the content of lignin's most readily cleaved alkyl-aryl ether bonds in ß-ether units. The high yields suggest that other units in lignin are being cleaved. Diaryl ether units are important units in lignin, and their cleavage has been examined previously using simple model compounds, such as diphenyl ether. Herein, the hydrogenolysis of model compounds that closely resemble the native lignin 4-O-5 diaryl ether units was analyzed. The results provided unexpected insights into the reactivity and partial cleavage of these compounds. The models and lignin polymer produced not only monomers, but also unusual 1,3,5-meta-substituted aromatics that appear to be diagnostic for the presence and the cleavage of the 4-O-5 diaryl ether unit in lignin.

Protection Strategies Enable Selective Conversion of Biomass.

Selective and economic conversion of lignocellulosic biomass components to bio-based fuels and chemicals is the major goal of biorefineries, but low yields and selectivity for fuel precursors such as sugars, furanics, and lignin-derived monomers pose significant disadvantages in process economics. In this Minireview we summarize the existing protection strategies used in biomass chemocatalytic conversion processes and focus the discussions on the mechanisms, challenges, and opportunities of each strategy. We introduce a concept of using analogous methods to manipulate biomass catalytic conversion pathways during the upgrading of carbohydrates to fuels and chemicals. This Minireview may provide new insights into the development of selective biorefining processes from a different perspective, expanding the options for selective conversion of biomass to fuels and chemicals.

Introducing curcumin biosynthesis in Arabidopsis enhances lignocellulosic biomass processing.

Lignin is the main cause of lignocellulosic biomass recalcitrance to industrial enzymatic hydrolysis. By partially replacing the traditional lignin monomers by alternative ones, lignin extractability can be enhanced. To design a lignin that is easier to degrade under alkaline conditions, curcumin (diferuloylmethane) was produced in the model plant Arabidopsis thaliana via simultaneous expression of the turmeric (Curcuma longa) genes DIKETIDE-CoA SYNTHASE (DCS) and CURCUMIN SYNTHASE 2 (CURS2). The transgenic plants produced a plethora of curcumin- and phenylpentanoid-derived compounds with no negative impact on growth. Catalytic hydrogenolysis gave evidence that both curcumin and phenylpentanoids were incorporated into the lignifying cell wall, thereby significantly increasing saccharification efficiency after alkaline pretreatment of the transgenic lines by 14-24% as compared with the wild type. These results demonstrate that non-native monomers can be synthesized and incorporated into the lignin polymer in plants to enhance their biomass processing efficiency.

An "ideal lignin" facilitates full biomass utilization.

Lignin, a major component of lignocellulosic biomass, is crucial to plant growth and development but is a major impediment to efficient biomass utilization in various processes. Valorizing lignin is increasingly realized as being essential. However, rapid condensation of lignin during acidic extraction leads to the formation of recalcitrant condensed units that, along with similar units and structural heterogeneity in native lignin, drastically limits product yield and selectivity. Catechyl lignin (C-lignin), which is essentially a benzodioxane homopolymer without condensed units, might represent an ideal lignin for valorization, as it circumvents these issues. We discovered that C-lignin is highly acid-resistant. Hydrogenolysis of C-lignin resulted in the cleavage of all benzodioxane structures to produce catechyl-type monomers in near-quantitative yield with a selectivity of 90% to a single monomer.

Structural Characterization of Lignins from Willow Bark and Wood.

Understanding the chemical structure of lignin in willow bark is an indispensable step to design how to separate its fiber bundles. The whole cell wall and enzyme lignin preparations sequentially isolated from ball-milled bark, inner bark, and wood were comparatively investigated by nuclear magnetic resonance (NMR) spectroscopy and three classical degradative methods, i.e., alkaline nitrobenzene oxidation, derivatization followed by reductive cleavage, and analytical thioacidolysis. All results demonstrated that the guaiacyl (G) units were predominant in the willow bark lignin over syringyl (S) and minor p-hydroxyphenyl (H) units. Moreover, the monomer yields and S/G ratio rose progressively from bark to inner bark and wood, indicating that lignin may be more condensed in bark than in other tissues. Additionally, major interunit linkage substructures (ß-aryl ethers, phenylcoumarans, and resinols) together with cinnamyl alcohol end groups were relatively quantitated by two-dimensional NMR spectroscopy. Bark and inner bark were rich in pectins and proteins, which were present in large quantities and also in the enzyme lignin preparations.

Selective Oxidation of Lignin Model Compounds.

Lignin, the planet's most abundant renewable source of aromatic compounds, is difficult to degrade efficiently to welldefined aromatics. We developed a microwave-assisted catalytic Swern oxidation system using an easily prepared catalyst, MoO2 Cl2 (DMSO)2 , and DMSO as the solvent and oxidant. It demonstrated high efficiency in transforming lignin model compounds containing the units and functional groups found in native lignins. The aromatic ring substituents strongly influenced the selectivity of ß-ether phenolic dimer cleavage to generate sinapaldehyde and coniferaldehyde, monomers not usually produced by oxidative methods. Time-course studies on two key intermediates provided insight into the reaction pathway. Owing to the broad scope of this oxidation system and the insight gleaned with regard to its mechanism, this strategy could be adapted and applied in a general sense to the production of useful aromatic chemicals from phenolics and lignin.

In Vitro Enzymatic Depolymerization of Lignin with Release of Syringyl, Guaiacyl, and Tricin Units.

New environmentally sound technologies are needed to derive valuable compounds from renewable resources. Lignin, an abundant polymer in terrestrial plants comprised predominantly of guaiacyl and syringyl monoaromatic phenylpropanoid units, is a potential natural source of aromatic compounds. In addition, the plant secondary metabolite tricin is a recently discovered and moderately abundant flavonoid in grasses. The most prevalent interunit linkage between guaiacyl, syringyl, and tricin units is the ß-ether linkage. Previous studies have shown that bacterial ß-etherase pathway enzymes catalyze glutathione-dependent cleavage of ß-ether bonds in dimeric ß-ether lignin model compounds. To date, however, it remains unclear whether the known ß-etherase enzymes are active on lignin polymers. Here we report on enzymes that catalyze ß-ether cleavage from bona fide lignin, under conditions that recycle the cosubstrates NAD+ and glutathione. Guaiacyl, syringyl, and tricin derivatives were identified as reaction products when different model compounds or lignin fractions were used as substrates. These results demonstrate an in vitro enzymatic system that can recycle cosubstrates while releasing aromatic monomers from model compounds as well as natural and engineered lignin oligomers. These findings can improve the ability to produce valuable aromatic compounds from a renewable resource like lignin.IMPORTANCE Many bacteria are predicted to contain enzymes that could convert renewable carbon sources into substitutes for compounds that are derived from petroleum. The ß-etherase pathway present in sphingomonad bacteria could cleave the abundant ß-O-4-aryl ether bonds in plant lignin, releasing a biobased source of aromatic compounds for the chemical industry. However, the activity of these enzymes on the complex aromatic oligomers found in plant lignin is unknown. Here we demonstrate biodegradation of lignin polymers using a minimal set of ß-etherase pathway enzymes, the ability to recycle needed cofactors (glutathione and NAD+) in vitro, and the release of guaiacyl, syringyl, and tricin as depolymerized products from lignin. These observations provide critical evidence for the use and future optimization of these bacterial ß-etherase pathway enzymes for industrial-level biotechnological applications designed to derive high-value monomeric aromatic compounds from lignin.

Characterization and Elimination of Undesirable Protein Residues in Plant Cell Wall Materials for Enhancing Lignin Analysis by Solution-State Nuclear Magnetic Resonance Spectroscopy.

Protein polymers exist in every plant cell wall preparation, and they interfere with lignin characterization and quantification. Here, we report the structural characterization of the residual protein peaks in 2D NMR spectra in corn cob and kenaf samples and note that aromatic amino acids are ubiquitous and evident in spectra from various other plants and tissues. The aromatic correlations from amino acid residues were identified and assigned as phenylalanine and tyrosine. Phenylalanine's 3/5 correlation peak is superimposed on the peak from typical lignin p-hydroxyphenyl (H-unit) structures, causing an overestimation of the H units. Protein contamination also occurs when using cellulases to prepare enzyme lignins from virtually protein-free wood samples. We used a protease to remove the protein residues from the ball-milled cell walls, and we were able to reveal H-unit structures in lignins more clearly in the 2D NMR spectra, providing a better basis for their estimation.

Formaldehyde stabilization facilitates lignin monomer production during biomass depolymerization.

Practical, high-yield lignin depolymerization methods could greatly increase biorefinery productivity and profitability. However, development of these methods is limited by the presence of interunit carbon-carbon bonds within native lignin, and further by formation of such linkages during lignin extraction. We report that adding formaldehyde during biomass pretreatment produces a soluble lignin fraction that can be converted to guaiacyl and syringyl monomers at near theoretical yields during subsequent hydrogenolysis (47 mole % of Klason lignin for beech and 78 mole % for a high-syringyl transgenic poplar). These yields were three to seven times those obtained without formaldehyde, which prevented lignin condensation by forming 1,3-dioxane structures with lignin side-chain hydroxyl groups. By depolymerizing cellulose, hemicelluloses, and lignin separately, monomer yields were between 76 and 90 mole % for these three major biomass fractions.

NMR Assignment for Diaryl Ether Structures (4-O-5 Structures) in Pine Wood Lignin.

A 4-O-5-tetramer lignin model compound carrying ß-O-4 linkages on each of the side-chain moieties was synthesized, as well as 4-O-5-coupled dehydrodiconiferyl alcohol. By comparison with their NMR data, two cross-signals in the HSQC spectrum of pine milled wood lignin recorded in DMSO-d6 were assigned to H2/C2 and H6/C6 correlations on the aromatic rings of 4-O-5-linked units. Although the H2/C2 correlation peak appeared in the same region as syringyl units, nitrobenzene oxidation of the pine lignin did not yield any syringyl-type product, but did release a 4-O-5-type product.

Modified native cellulose fibers--a novel efficient adsorbent for both fluoride and arsenic.

Native cellulose fibers were surface modified by poly(N,N-dimethyl aminoethyl methacrylate) (PDMAEMA) to generate an anion adsorbent, which was characterized by scanning electron microscopy, fourier transform infrared spectroscopy and elemental analyzer. This adsorbent had high efficiency in removal of F(-), AsO(2)(-) and AsO(4)(3-) from aqueous solutions, even at low initial concentrations. Adsorption kinetics showed that the adsorption equilibrium could be reached within 1 min. The distribution coefficient did not change with adsorbent dose, indicating the adsorption was a homogenous process. Langmuir, Freundlich and Temkin models were used to fit the adsorption isotherms. Based on the parameters calculated from the models, the adsorption capacity was in the order of AsO(4)(3-)≫AsO(2)(-)>F(-), and the adsorption was a favorable process. Compared with Freundlich and Temkin models, the isotherms followed Langmuir model a little better.