Metabolomics efficiently discriminates monozygotic twins in peripheral blood.

Monozygotic (MZ) twins cannot be distinguished using conventional forensic STR typing because they present identical STR genotypings. However, MZ twins do not always live in the same environment and often have different dietary and other lifestyle habits. Metabolic profiles are deyermined by individual characteristics and are also influenced by the environment in which they live. Therefore, they are potential markers capable of identifying MZ twins. Moreover, the production of proteins varies from organism to organism and is influenced by both the physiological state of the body and the external environment. Hence, we used metabolomics and proteomics to identify metabolites and proteins in peripheral blood to discriminate MZ twins. We identified 1749 known metabolites and 622 proteins in proteomic analysis. The metabolic profiles of four pairs of MZ twins revealed minor differences in intra-MZ twins and major differences in inter-MZ twins. Each pair of MZ twins exhibited distinct characteristics, and four metabolites-methyl picolinate, acesulfame, paraxanthine, and phenylbenzimidazole sulfonic acid-were observed in all four MZ twin pairs. These four differential exogenous metabolites conincidently show that the different external environments and life styles can be well distinguished by metabolites, considering that twins do not all have the same eating habits and living environments. Moreover, MZ twins showed different protein profiles in serum but not in whole blood. Thus, our results indicate that differential metabolites provide potential biomarkers for the personal identification of MZ twins in forensic medicine.

General Fabrication of Robust Alloyed Metal Anodes for High-Performance Metal Batteries.

Revitalizing metal anodes for rechargeable batteries confronts challenges such as dendrite formation, limited cyclicity, and suboptimal energy density. Despite various efforts, a practical fabrication method for dendrite-free metal anodes remains unavailable. Herein, focusing on Li as exemplar, a general strategy is reported to enhance reversibility of the metal anodes by forming alloyed metals, which is achieved by induction heating of 3D substrate, lithiophilic metals, and Li within tens of seconds. It is demonstrated that preferred alloying interactions between substrates and lithiophilic metals created a lithiophilic metal-rich region adjacent to the substrate, serving as ultrastable lithiophilic host to guide dendrite-free deposition, particularly during prolonged high-capacity cycling. Simultaneously, an alloying between lithiophilic metals and Li creates a Li-rich region adjacent to electrolyte that reduces nucleation overpotential and constitutes favorable electrolyte-Li interface. The resultant composite Li anodes paired with high areal loading LiNi0.8Co0.1Mn0.1O2 cathodes achieve superior cycling stability and remarkable energy density above 1200 Wh L-1 (excluding packaging). Furthermore, this approach shows broader applicability to other metal anodes plagued by dendrite-related challenges, such as Na and Zn. Overall, this work paves the way for development of commercially viable metal-based batteries that offer a combination of safety, high energy density, and durability.

Laser-Scribed Battery Electrodes for Ultrafast Zinc-Ion Energy Storage.

Aqueous Zn batteries are promising for large-scale energy storage but are plagued by the lack of high-performance cathode materials that enable high specific capacity, ultrafast charging, and outstanding cycling stability. Here, a laser-scribed nano-vanadium oxide (LNVO) cathode is designed that can simultaneously achieve these properties. The material stores charge through Faradaic redox reactions on/near the surface at fast rates owing to the small grain size of vanadium oxide and interpenetrating 3D graphene network, displaying a surface-controlled capacity contribution (90%-98%). Multiple characterization techniques unambiguously reveal that zinc and hydronium ions co-insert with minimal lattice change upon cycling. It is demonstrated that a high specific capacity of 553 mAh g-1 is achieved at 0.1 A g-1, and an impressive 264 mAh g-1 capacity is retained at 100 A g-1 within 10 s, showing excellent rate capability. The LNVO/Zn can also reach >90% capacity retention after 3000 cycles at a high rate of 30 A g-1, as well as achieving both high energy (369 Wh kg-1) and power densities (56306 W kg-1). Moreover, the LNVO cathode retains its excellent cycling performance when integrated into quasi-solid-state pouch cells, further demonstrating mechanical stability and its potential for practical application in wearable and grid-scale applications.

Reprecipitation: A Rapid Synthesis of Micro-Sized Silicon-Graphene Composites for Long-lasting Lithium-Ion Batteries.

Silicon microparticles (SiMPs) have gained significant attention as a lithium-ion battery anode material due to their 10 times higher theoretical capacity compared to conventional graphite anodes as well as their much lower production cost than silicon nanoparticles (SiNPs). However, SiMPs have suffered from poorer cycle life relative to SiNPs because their larger size makes them more susceptible to volume changes during charging and discharging. Creating a wrapping structure in which SiMPs are enveloped by carbon layers has proven to be an effective strategy to significantly improve the cycling performance of SiMPs. However, the synthesis processes are complex and time-/energy-consuming and therefore not scalable. In this study, a wrapping structure is created by using a simple, rapid, and scalable "modified reprecipitation method". Graphene oxide (GO) and SiMP dispersion in tetrahydrofuran is injected into n-hexane, in which GO and SiMP by themselves cannot disperse. GO and SiMP therefore aggregate and precipitate immediately after injection to form a wrapping structure. The resulting SiMP/GO film is laser scribed to reduce GO to a laser-scribed graphene (LSG). Simultaneously, SiOx and SiC protection layers form on the SiMPs through the laser process, which alleviates severe volume change. Owing to these desirable characteristics, the modified reprecipitation method successfully doubles the cycle life of SiMP/graphene composites compared to the simple physically mixing method (50.2% vs. 24.0% retention at the 100th cycle). The modified reprecipitation method opens a new synthetic strategy for SiMP/carbon composites.

Quantifying the Impact of Motions on Human Aiming Performance: Evidence from Eye Tracking and Bio-Signals.

Working on a moving platform can significantly impede human performance. Previous studies on moving vehicles have often focused on the overall impact on general task performance, whereas our study's emphasis is on precise hand movements, exploring the interaction between body motion and the escalation of task difficulty. We recruited 28 participants to engage in reciprocal aiming tasks, following Paul Fitts's setting, under both in-motion and stationary conditions. The task index of difficulty (ID) was manipulated by varying the width of the targets and the distance between the targets. We measured participants' movement time (MT), performance errors, and monitored their eye movements using an eye-tracking device, heart rate (HR), and respiration rate (RR) during the tasks. The measured parameters were compared across two experimental conditions and three ID levels. Compared to the stationary conditions, the in-motion conditions degraded human aiming performance, resulting in significantly prolonged MT, increased errors, and longer durations of eye fixations and saccades. Furthermore, HR and RR increased under the in-motion conditions. Linear relationships between MT and ID exhibited steeper slopes under the in-motion conditions compared to the stationary conditions. This study builds a foundation for us to explore the control mechanisms of individuals working in dynamic and demanding environments, such as pilots in airplanes and paramedics in ambulances.

A Rapid, Scalable Laser-Scribing Process to Prepare Si/Graphene Composites for Lithium-Ion Batteries.

Silicon has gained significant attention as a lithium-ion battery anode material due to its high theoretical capacity compared to conventional graphite. Unfortunately, silicon anodes suffer from poor cycling performance caused by their extreme volume change during lithiation and de-lithiation. Compositing silicon particles with 2D carbon materials, such as graphene, can help mitigate this problem. However, an unaddressed challenge remains: a simple, inexpensive synthesis of Si/graphene composites. Here, a one-step laser-scribing method is proposed as a straightforward, rapid (≈3 min), scalable, and less-energy-consuming (≈5 W for a few minutes under air) process to prepare Si/laser-scribed graphene (LSG) composites. In this research, two types of Si particles, Si nanoparticles (SiNPs) and Si microparticles (SiMPs), are used. The rate performance is improved after laser scribing: SiNP/LSG retains 827.6 mAh g-1 at 2.0 A gSi+C -1 , while SiNP/GO (before laser scribing) retains only 463.8 mAh g-1 . This can be attributed to the fast ion transport within the well-exfoliated 3D graphene network formed by laser scribing. The cyclability is also improved: SiNP/LSG retains 88.3% capacity after 100 cycles at 2.0 A gSi+C -1 , while SiNP/GO retains only 57.0%. The same trend is found for SiMPs: the SiMP/LSG shows better rate and cycling performance than SiMP/GO composites.

Simple and field-adapted species identification of biological specimens combining multiplex multienzyme isothermal rapid amplification, lateral flow dipsticks, and universal primers for initial rapid screening without standard PCR laboratory.

Species identification of biological specimens can provide the valuable clues and accelerate the speed of prosecution material processing for forensic investigation, especially when the case scene is inaccessible and the physical evidence is cumbersome. Thus, establishing a rapid, simple, and field-adapted species identification method is crucial for forensic scientists, particularly as first-line technology at the crime scene for initial rapid screening. In this study, we established a new field-adapted species identification method by combining multiplex multienzyme isothermal rapid amplification (MIRA), lateral flow dipstick (LFD) system, and universal primers. Universal primers targeting COX I and COX II genes were used in multiplex MIRA-LFD system for seven species identification, and a dedicated MIRA-LFD system primer targeting CYT B gene was used to detect the human material. DNA extraction was performed by collecting DNA directly from the centrifuged supernatant. Our study found that the entire amplification process took only 15 min at 37 °C and the results of LFDs could be visually observed after 10 min. The detection sensitivity of human material could reach 10 pg, which is equivalent to the detection of single cell. Different common animal samples mixed at the ratio of 1 ng:1 ng, 10 ng:1 ng, and 1 ng:10 ng could be detected successfully. Furthermore, the damaged and degraded samples could also be detected. Therefore, the convenient, feasible, and rapid approach for species identification is suitable for popularization as first-line technology at the crime scene for initial rapid screening and provides a great convenient for forensic application.

Ultrafast deposition of faceted lithium polyhedra by outpacing SEI formation.

Electrodeposition of lithium (Li) metal is critical for high-energy batteries1. However, the simultaneous formation of a surface corrosion film termed the solid electrolyte interphase (SEI)2 complicates the deposition process, which underpins our poor understanding of Li metal electrodeposition. Here we decouple these two intertwined processes by outpacing SEI formation at ultrafast deposition current densities3 while also avoiding mass transport limitations. By using cryogenic electron microscopy4-7, we discover the intrinsic deposition morphology of metallic Li to be that of a rhombic dodecahedron, which is surprisingly independent of electrolyte chemistry or current collector substrate. In a coin cell architecture, these rhombic dodecahedra exhibit near point-contact connectivity with the current collector, which can accelerate inactive Li formation8. We propose a pulse-current protocol that overcomes this failure mode by leveraging Li rhombic dodecahedra as nucleation seeds, enabling the subsequent growth of dense Li that improves battery performance compared with a baseline. While Li deposition and SEI formation have always been tightly linked in past studies, our experimental approach enables new opportunities to fundamentally understand these processes decoupled from each other and bring about new insights to engineer better batteries.

Discrimination of monozygotic twins using mtDNA heteroplasmy through probe capture enrichment and massively parallel sequencing.

Differentiating between monozygotic (MZ) twins remains difficult because they have the same genetic makeup. Applying the traditional STR genotyping approach cannot differentiate one from the other. Heteroplasmy refers to the presence of two or more different mtDNA copies within a single cell and this phenomenon is common in humans. The levels of heteroplasmy cannot change dramatically during transmission in the female germ line but increase or decrease during germ-line transmission and in somatic tissues during life. As massively parallel sequencing (MPS) technology has advanced, it has shown the extraordinary quantity of mtDNA heteroplasmy in humans. In this study, a probe hybridization technique was used to obtain mtDNA and then MPS was performed with an average sequencing depth of above 4000. The results showed us that all ten pairs of MZ twins were clearly differentiated with the minor heteroplasmy threshold at 1.0%, 0.5%, and 0.1%, respectively. Finally, we used a probe that targeted mtDNA to boost sequencing depth without interfering with nuclear DNA and this technique can be used in forensic genetics to differentiate the MZ twins.

Investigation of reversible metal ion (Li+, Na+, Mg2+, Al3+) insertion in MoTe2 for rechargeable aqueous batteries.

In this work, we report the electrochemical reactivity of MoTe2 for various metal ions with special emphasis on Al3+ ion storage in aqueous electrolytes for the first time. A stable discharge capacity of 100 mA h g-1 over 250 cycles at a current density of 1 Ag-1 could be obtained for the Al3+ ion, whereas inferior storage capacities were shown for other metal ions.

Tough Hydrogel Electrolytes for Anti-Freezing Zinc-Ion Batteries.

As the soaring demand for energy storage continues to grow, batteries that can cope with extreme conditions are highly desired. Yet, existing battery materials are limited by weak mechanical properties and freeze-vulnerability, prohibiting safe energy storage in devices that are exposed to low temperature and unusual mechanical impacts. Herein, a fabrication method harnessing the synergistic effect of co-nonsolvency and "salting-out" that can produce poly(vinyl alcohol) hydrogel electrolytes with unique open-cell porous structures, composed of strongly aggregated polymer chains, and containing disrupted hydrogen bonds among free water molecules, is introduced. The hydrogel electrolyte simultaneously combines high strength (tensile strength 15.6 MPa), freeze-tolerance (< -77 °C), high mass transport (10× lower overpotential), and dendrite and parasitic reactions suppression for stable performance (30 000 cycles). The high generality of this method is further demonstrated with poly(N-isopropylacrylamide) and poly(N-tertbutylacrylamide-co-acrylamide) hydrogels. This work takes a further step toward flexible battery development for harsh environments.

Expanding the cryogenic electron microscopy toolbox to reveal diverse classes of battery solid electrolyte interphase.

Advancements in energy storage technologies such as Li-based batteries depend on a deep understanding of the chemical and structural aspects of critical interfaces. Among these, the solid electrolyte interphase (SEI) governs how batteries operate yet remains one of the most elusive to characterize due to its rapid degradation under an electron beam and sensitivity to ambient conditions. In recent years, cryogenic electron microscopy (cryo-EM) has emerged as a promising technique to provide atomic-resolution imaging of beam-sensitive battery materials. Distinct SEIs have been discovered with unique chemical compositions and structural features. In this perspective, the role of cryo-EM in uncovering the physicochemical properties of three classes of SEIs (i.e., compact, extended, and indirect SEI) will be defined and discussed. Furthermore, an in-depth analysis of new cryo-EM imaging modalities will be provided to highlight directions for the future development of cryo-EM.

Onboard early detection and mitigation of lithium plating in fast-charging batteries.

Fast-charging is considered as one of the most desired features needed for lithium-ion batteries to accelerate the mainstream adoption of electric vehicles. However, current battery charging protocols mainly consist of conservative rate steps to avoid potential hazardous lithium plating and its associated parasitic reactions. A highly sensitive onboard detection method could enable battery fast-charging without reaching the lithium plating regime. Here, we demonstrate a novel differential pressure sensing method to precisely detect the lithium plating event. By measuring the real-time change of cell pressure per unit of charge (dP/dQ) and comparing it with the threshold defined by the maximum of dP/dQ during lithium-ion intercalation into the negative electrode, the onset of lithium plating before its extensive growth can be detected with high precision. In addition, we show that by integrating this differential pressure sensing into the battery management system (BMS), a dynamic self-regulated charging protocol can be realized to effectively extinguish the lithium plating triggered by low temperature (0 °C) while the conventional static charging protocol leads to catastrophic lithium plating at the same condition. We propose that differential pressure sensing could serve as an early nondestructive diagnosis method to guide the development of fast-charging battery technologies.

Resolving Current-Dependent Regimes of Electroplating Mechanisms for Fast Charging Lithium Metal Anodes.

Poor fast-charge capabilities limit the usage of rechargeable Li metal anodes. Understanding the connection between charging rate, electroplating mechanism, and Li morphology could enable fast-charging solutions. Here, we develop a combined electroanalytical and nanoscale characterization approach to resolve the current-dependent regimes of Li plating mechanisms and morphology. Measurement of Li+ transport through the solid electrolyte interphase (SEI) shows that low currents induce plating at buried Li||SEI interfaces, but high currents initiate SEI-breakdown and plating at fresh Li||electrolyte interfaces. The latter pathway can induce uniform growth of {110}-faceted Li at extremely high currents, suggesting ion-transport limitations alone are insufficient to predict Li morphology. At battery relevant fast-charging rates, SEI-breakdown above a critical current density produces detrimental morphology and poor cyclability. Thus, prevention of both SEI-breakdown and slow ion-transport in the electrolyte is essential. This mechanistic insight can inform further electrolyte engineering and customization of fast-charging protocols for Li metal batteries.

Exosomes Derived From Mesenchymal Stem Cells Pretreated With Ischemic Rat Heart Extracts Promote Angiogenesis via the Delivery of DMBT1.

Mesenchymal stem cell-derived exosomes (MSC-Exos) have been shown to promote angiogenesis. Treating MSCs with ischemic rat brain extracts was sufficient to augment their benefits in stroke. However, no similar analyses of ischemic heart extracts have been performed to date. We aim to determine whether MSC-Exos derived from MSCs pretreated with ischemic rat heart extract were able to promote angiogenesis and to clarify underlying mechanisms. ELISA (enzyme-linked immunosorbent assay) of heart extracts revealed a significant increase of vascular endothelial growth factor (VEGF) at 24 h post-MI (myocardial infarction) modeling, and time-dependent decreases in hypoxia inducible factor-1α (HIF-1α). MTT and wound healing assays revealed human umbilical vein endothelial cells (HUVECs) migration and proliferation increased following MSCE-Exo treatment (exosomes derived from MSC pretreated with ischemic heart extracts of 24 h post-MI) relative to MSCN-Exo treatment (exosomes derived from MSC pretreated with normal heart extracts). Proteomic analyses of MSCE-Exo and MSCN-Exo were conducted to screen for cargo proteins promoting angiogenesis. Result revealed several angiogenesis-related proteins were upregulated in MSCE-Exo, including DMBT1 (deleted in malignant brain tumors 1). When DMBT1 was silenced in MSCs, HUVECs with MSCDMBT1 RNAi-Exo treatment exhibited impaired proliferative and migratory activity and reductions of DMBT1, p-Akt, ß-catenin, and VEGF. To explore how ischemic heart extracts took effects, ELISA was conducted showing a significant increase of IL-22 at 24 h post-MI modeling. P-STAT3, IL22RA1, DMBT1, and VEGF proteins were increased in MSCE relative to MSCN, and VEGF and DMBT1 were increased in MSCE-Exos. Together, these suggest that IL-22 upregulation in ischemic heart extracts can increase DMBT1 in MSCs. Exosomes derived from those MSCs deliver DMBT1 to HUVECs, thereby enhancing their migratory and proliferative activity.

Spheres of Graphene and Carbon Nanotubes Embedding Silicon as Mechanically Resilient Anodes for Lithium-Ion Batteries.

Novel anode materials for lithium-ion batteries were synthesized by in situ growth of spheres of graphene and carbon nanotubes (CNTs) around silicon particles. These composites possess high electrical conductivity and mechanical resiliency, which can sustain the high-pressure calendering process in industrial electrode fabrication, as well as the stress induced during charging and discharging of the electrodes. The resultant electrodes exhibit outstanding cycling durability (∼90% capacity retention at 2 A g-1 after 700 cycles or a capacity fading rate of 0.014% per cycle), calendering compatibility (sustain pressure over 100 MPa), and adequate volumetric capacity (1006 mAh cm-3), providing a novel design strategy toward better silicon anode materials.

Lovastatin Inhibits RhoA to Suppress Canonical Wnt/ß-Catenin Signaling and Alternative Wnt-YAP/TAZ Signaling in Colon Cancer.

Statins are first-line drugs used to control patient lipid levels, but there is recent evidence that statin treatment can lower colorectal cancer (CRC) incidence by 50% and prolong CRC patient survival through mechanisms that are poorly understood. In this study, we found that the treatment of APCmin mice by the mevalonate pathway inhibitor lovastatin significantly reduced the number of colonic masses and improved hypersplenism and peripheral anemia. Furthermore, reverse transcription polymerase chain reaction (RT-PCR) analysis of colonic mass tissues showed a potent inhibitory effect in both Wnt/ß-catenin signaling and YAP/TAZ signaling in the lovastatin treatment group. The results of our transcriptomic analyses in RKO indicated that lovastatin regulated several proliferation-related signaling pathways. Moreover, lovastatin suppressed important genes and proteins related to the canonical Wnt/ß-catenin and alternative Wnt-YAP/TAZ signaling pathways in RKO and SW480 cells, and these effects were rescued by mevalonic acid (MVA), as confirmed through a series of Western blotting, RT-PCR, and reporter assays. Given that statins suppress oncogenic processes primarily through the inhibition of Rho GTPase in the mevalonate pathway, we speculate that lovastatin can inhibit certain Rho GTPases to suppress both canonical Wnt/ß-catenin signaling and alternative Wnt-YAP/TAZ signaling. In RKO cells, lovastatin showed similar inhibitory properties as the RhoA inhibitor CCG1423, being able to inhibit ß-catenin, TAZ, and p-LATS1 protein activity. Our results revealed that lovastatin inhibited RhoA activity, thereby suppressing the downstream canonical Wnt/ß-catenin and alternative Wnt-YAP/TAZ pathways in colon cancer cells. These inhibitory properties suggest the promise of statins as a treatment for CRC. Altogether, the present findings support the potential clinical use of statins in non-cardiovascular contexts and highlight novel targets for anticancer treatments.

Capturing the swelling of solid-electrolyte interphase in lithium metal batteries.

Although liquid-solid interfaces are foundational in broad areas of science, characterizing this delicate interface remains inherently difficult because of shortcomings in existing tools to access liquid and solid phases simultaneously at the nanoscale. This leads to substantial gaps in our understanding of the structure and chemistry of key interfaces in battery systems. We adopt and modify a thin film vitrification method to preserve the sensitive yet critical interfaces in batteries at native liquid electrolyte environments to enable cryo­electron microscopy and spectroscopy. We report substantial swelling of the solid-electrolyte interphase (SEI) on lithium metal anode in various electrolytes. The swelling behavior is dependent on electrolyte chemistry and is highly correlated to battery performance. Higher degrees of SEI swelling tend to exhibit poor electrochemical cycling.