Kink bands promote exceptional fracture resistance in a NbTaTiHf refractory medium-entropy alloy.

Single-phase body-centered cubic (bcc) refractory medium- or high-entropy alloys can retain compressive strength at elevated temperatures but suffer from extremely low tensile ductility and fracture toughness. We examined the strength and fracture toughness of a bcc refractory alloy, NbTaTiHf, from 77 to 1473 kelvin. This alloy's behavior differed from that of comparable systems by having fracture toughness over 253 MPa·m1/2, which we attribute to a dynamic competition between screw and edge dislocations in controlling the plasticity at a crack tip. Whereas the glide and intersection of screw and mixed dislocations promotes strain hardening controlling uniform deformation, the coordinated slip of <111> edge dislocations with {110} and {112} glide planes prolongs nonuniform strain through formation of kink bands. These bands suppress strain hardening by reorienting microscale bands of the crystal along directions of higher resolved shear stress and continually nucleate to accommodate localized strain and distribute damage away from a crack tip.

Overcoming neutrophil-induced immunosuppression in postoperative cancer therapy: Combined sialic acid-modified liposomes with scaffold-based vaccines.

Immunotherapy is a promising approach for preventing postoperative tumor recurrence and metastasis. However, inflammatory neutrophils, recruited to the postoperative tumor site, have been shown to exacerbate tumor regeneration and limit the efficacy of cancer vaccines. Consequently, addressing postoperative immunosuppression caused by neutrophils is crucial for improving treatment outcomes. This study presents a combined chemoimmunotherapeutic strategy that employs a biocompatible macroporous scaffold-based cancer vaccine (S-CV) and a sialic acid (SA)-modified, doxorubicin (DOX)-loaded liposomal platform (DOX@SAL). The S-CV contains whole tumor lysates as antigens and imiquimod (R837, Toll-like receptor 7 activator)-loaded PLGA nanoparticles as immune adjuvants for cancer, which enhance dendritic cell activation and cytotoxic T cell proliferation upon localized implantation. When administered intravenously, DOX@SAL specifically targets and delivers drugs to activated neutrophils in vivo, mitigating neutrophil infiltration and suppressing postoperative inflammatory responses. In vivo and vitro experiments have demonstrated that S-CV plus DOX@SAL, a combined chemo-immunotherapeutic strategy, has a remarkable potential to inhibit postoperative local tumor recurrence and distant tumor progression, with minimal systemic toxicity, providing a new concept for postoperative treatment of tumors.

Investigation on Mechanism of Microstructure Evolution during Multi-Process Hot Forming of GH4169 Superalloy Forging.

Typically, in the manufacturing of GH4169 superalloy forgings, the multi-process hot forming that consists of pre-deformation, heat treatment and final deformation is required. This study focuses on the microstructural evolution throughout hot working processes. Considering that δ phase can promote nucleation and limit the growth of grains, a process route was designed, including pre-deformation, aging treatment (AT) to precipitate sufficient δ phases, high temperature holding (HTH) to uniformly heat the forging, and final deformation. The results show that the uneven strain distribution after pre-deformation has a significant impact on the subsequent refinement of the grain microstructure due to the complex coupling relationship between the evolution of the δ phase and recrystallization behavior. After the final deformation, the fine-grain microstructure with short rod-like δ phases as boundaries is easy to form in the region with a large strain of the pre-forging. However, necklace-like mixed grain microstructure is formed in the region with a small strain of the pre-forging. In addition, when the microstructure before final deformation consists of mixed grains, dynamic recrystallization (DRX) nucleation behavior preferentially depends on kernel average misorientation (KAM) values. A large KAM can promote the formation of DRX nuclei. When the KAM values are close, a smaller average grain size of mixed-grain microstructure is more conductive to promote the DRX nucleation. Finally, the interaction mechanisms between δ phase and DRX nucleation are revealed.

Dynamics of an Excess Electron in Molten LiF, KF, MgF2, and BeF2.

Ab initio molecular dynamics simulations suggest that the dynamics of an excess electron in different types of molten salts are not always the same. In molten LiF, KF, and MgF2, the excess electron localizes in the cavity as a solvated electron for 10 ps, which agrees with the widely accepted theory of Pikaev. In molten BeF2, the excess electron shows a different localization pattern: it mostly exists in localized states but also occurs in many delocalized states. This "localize-delocalize" pattern originates from the high viscosity of BeF2 (16 000 cP at 900 °C), which will lead to slow ionic motion and finally result in slow solvent relaxation. Besides, the species formed by the localization of the excess electron in these four melts are also different. The spectral feature (broad peak in the vis-IR region) of the localized electron in molten alkaline halides was also observed in LiF, KF, MgF2, and BeF2. Both an excess electron and electrons in the bulk liquid could contribute to the spectra, but the excitation of the excess electron makes a bigger contribution to the broad vis-IR peak. Our predicted spectrum of molten LiF/KF qualitatively reproduces the major feature of the experimental spectrum, which partially validates our simulations.

The grading diagnostic strategy of molecular autopsy combined with pathological autopsy in the forensic diagnosis of cardiomyopathy.

The diagnosis of cardiomyopathy often relies on the subjective judgment of pathologists due to the variety of morphologic changes in the condition and its low specificity. This uncertainty can contribute to unexplained sudden cardiac deaths (USCD). To enhance the accuracy of hereditary cardiomyopathy diagnosis in forensic medicine, we proposed a combination of molecular autopsy and pathologic autopsy. By analyzing 16 deceased patients suspected of cardiomyopathy, using whole exome sequencing (WES) in molecular autopsy, and applying a combined diagnostic strategy, the study found pathogenic or likely pathogenic variants in 6 cases. Out of the 16 cases, cardiomyopathy was confirmed in 3, while 3 exhibited conditions consistent with it. Data for 4 cases was inconclusive, and cardiomyopathy was ruled out in 6. Notably, a novel variant of the TTN gene was identified. This research suggests that a grading diagnostic strategy, combining molecular and pathological evidence, can improve the accuracy of forensic cardiomyopathy diagnosis. This approach provides a practical model and strategy for precise forensic cause-of-death determination, addressing the limitations of relying solely on morphologic assessments in cardiomyopathy cases, and integrating genetic information for a more comprehensive diagnosis.

Fluorogenic CRISPR for genomic DNA imaging.

Genomic DNA exhibits high heterogeneity in terms of its dynamic within the nucleus, its structure and functional roles. CRISPR-based imaging approaches can image genomic loci in living cells. However, conventional CRISPR-based tools involve expressing constitutively fluorescent proteins, resulting in high background and nonspecific nucleolar signal. Here, we construct fluorogenic CRISPR (fCRISPR) to overcome these issues. fCRISPR is designed with dCas9, an engineered sgRNA, and a fluorogenic protein. Fluorogenic proteins are degraded unless they are bound to specific RNA hairpins. These hairpins are inserted into sgRNA, resulting in dCas9: sgRNA: fluorogenic protein ternary complexes that enable fluorogenic DNA imaging. With fCRISPR, we image various genomic DNA in different human cells with high signal-to-noise ratio and sensitivity. Furthermore, fCRISPR tracks chromosomes dynamics and length. fCRISPR also allows DNA double-strand breaks (DSBs) and repair to be tracked in real time. Taken together, fCRISPR offers a high-contrast and sensitive platform for imaging genomic loci.

Toremifene, an Alternative Adjuvant Endocrine Therapy, Is Better Than Tamoxifen in Breast Cancer Patients with CYP2D6*10 Mutant Genotypes.

PURPOSE: Tamoxifen showed individual differences in efficacy under different CYP2D6*10 genotypes. Our study evaluated the prognosis of tamoxifen or toremifene in hormone receptor (HR)-positive breast cancer patients under different genotypes. MATERIALS AND METHODS: CYP2D6*10 genotypes of HR-positive breast cancer patients were determined by Sanger sequencing, and all the patients were divided into tamoxifen group or toremifene group. RESULTS: A total of 268 patients with HR-positive breast cancer were studied. The median follow-up time was 72.0 months (range, 5.0 to 88.0 months). Of these, 88 (32.9%), 114 (42.5%), and 66 (24.6%) patients had C/C, C/T, and T/T genotypes, respectively. Among patients who received tamoxifen (n=176), the 5-year disease-free survival (DFS) rate in patients with C/C and C/T genotype was better than that in patients with T/T genotype, and the difference was statistically significant (p < 0.001 and p=0.030, respectively). In patients receiving toremifene, CYP2D6*10 genotype was not significantly associated with DFS (p=0.325). Regardless of genotypes, the 5-year DFS rate was higher in patients treated with toremifene than in patients with tamoxifen (91.3% vs. 80.0%, p=0.011). Compared with tamoxifen, toremifene remained an independent prognostic marker of DFS in multivariate analysis (hazard ratio, 0.422; p=0.021). For all the 180 patients with CYP2D6*10 C/T and T/T genotypes, the 5-year DFS rate was significantly higher in the toremifene group than in the tamoxifen group (90.8% vs. 70.1%, p=0.003). CONCLUSION: Toremifene may be an alternative adjuvant endocrine therapy for patients with CYP2D6*10 mutant genotypes.

Repolarizing Tumor-Associated Macrophages and inducing immunogenic cell Death: A targeted liposomal strategy to boost cancer immunotherapy.

Cancer immunotherapy has shown promise in treating various malignancies. However, the presence of an immunosuppressive tumor microenvironment (TME) triggered by M2 tumor-associated macrophages (TAMs) and the limited tumor cell antigenicity have hindered its broader application. To address these challenges, we developed DOX/R837@ManL, a liposome loaded with imiquimod (R837) and doxorubicin (DOX), modified with mannose-polyethylene glycol (Man-PEG). DOX/R837@ManL employed a mannose receptor (MRC1)-mediated targeting strategy, allowing it to accumulate selectively at M2 Tumor associated macrophages (TAMs) and tumor sites. R837, an immune adjuvant, promoted the conversion of immunosuppressive M2 TAMs into immunostimulatory M1 TAMs, and reshaped the immunosuppressive TME. Simultaneously, DOX release induced immunogenic cell death (ICD) in tumor cells and enhanced tumor cell antigenicity by promoting dendritic cells (DCs) maturation. Through targeted delivery, the synergistic action of R837 and DOX activated innate immunity and coordinated adaptive immunity, enhancing immunotherapy efficacy. In vivo experiments have demonstrated that DOX/R837@ManL effectively eliminated primary tumors and lung metastases, while also preventing tumor recurrence post-surgery. These findings highlighted the potential of DOX/R837@ManL as a promising strategy for cancer immunotherapy.

Repurposing of the antimalarial agent tafenoquine to combat MRSA.

IMPORTANCE: This study represents the first investigation into the antimicrobial effect of TAF against S. aureus and its potential mechanisms. Our data highlighted the effects of TAF against MRSA planktonic cells, biofilms, and persister cells, which is conducive to broadening the application of TAF. Through mechanistic studies, we revealed that TAF targets bacterial cell membranes. In addition, the in vivo experiments in mice demonstrated the safety and antimicrobial efficacy of TAF, suggesting that TAF could be a potential antibacterial drug candidate for the treatment of infections caused by multiple drug-resistant S. aureus.

Adjusting zinc deposition behaviors by a modified separator to acquire zinc anodes for aqueous rechargeable zinc-ion batteries.

Aqueous rechargeable zinc ion batteries (ARZIBs) are ideal for massive and longstanding energy storage applications because of their excellent security and low operation cost. Nevertheless, ARZIBs are subject to the severe corrosion reaction of zinc metal anodes that is derived from the thermodynamic unsteadiness of the zinc anodes in aqueous solution, as well as zinc dendrite growth originating from uncontrolled zinc deposition. Herein, we created a separator by coating a thin piece of polypropylene (PP) with a compound consisting of zinc trifluoromethanesulfonate [Zn(OTf)2] and poly(vinylidene fluoride-hexafluoropropylene (PVDF-HFP). Consequently, the severe corrosion reaction of the zinc metal anodes and the profuse formation of zinc dendrites were effectively mitigated by the novel PP separator, which prolonged the lifetime of the zinc metal anodes. When a zinc metal plating layer was used with preferential (002) crystallographic orientation, the cyclic performance over 1100 h of the symmetrical Zn∥Zn battery based on the novel separator was steady. Additionally, the Zn∥MnO2 batteries exhibited an impressive specific capacity and competitive long durability of 75.5% over 500 cycles at a current density of 0.1 A g-1. With this work, we intend to set the standard for designing novel separators in the construction of advanced zinc anodes for high-performance ARZIBs.

A 0D-2D Heterojunction Bismuth Molybdate-Anchored Multifunctional Hydrogel for Highly Efficient Eradication of Drug-Resistant Bacteria.

Due to the increasing antibiotic resistance and the lack of broad-spectrum antibiotics, there is an urgent requirement to develop fresh strategies to combat multidrug-resistant pathogens. Herein, defect-rich bismuth molybdate heterojunctions [zero-dimensional (0D) Bi4MoO9/two-dimensional (2D) Bi2MoO6, MBO] were designed for rapid capture of bacteria and synergistic photocatalytic sterilization. The as-prepared MBO was experimentally and theoretically demonstrated to possess defects, heterojunctions, and irradiation triple-enhanced photocatalytic activity for efficient generation of reactive oxygen species (ROS) due to the exposure of more active sites and separation of effective electron-hole pairs. Meanwhile, dopamine-modified MBO (pMBO) achieved a positively charged and rough surface, which conferred strong bacterial adhesion and physical penetration to the nanosheets, effectively trapping bacteria within the damage range and enhancing ROS damage. Based on this potent antibacterial ability of pMBO, a multifunctional hydrogel consisting of poly(vinyl alcohol) cross-linked tannic acid-coated cellulose nanocrystals (CPTB) and pMBO, namely CPTB@pMBO, is developed and convincingly effective against methicillin-resistant Staphylococcus aureus in a mouse skin infection model. In addition, the strategy of combining a failed beta-lactam antibiotic with CPTB@pMBO to photoinactivation with no resistance observed was developed, which presented an idea to address the issue of antibiotic resistance in bacteria and to explore facile anti-infection methods. In addition, CPTB@pMBO can reduce excessive proteolysis of tissue and inflammatory response by regulating the expression of genes and pro-inflammatory factors in vivo, holding great potential for the effective treatment of wound infections caused by drug-resistant bacteria.

Regulating the Polypyrrole Ion-Selective Membrane and Au Solid Contact Layer to Improve the Performance of Nitrate All-Solid Ion-Selective Electrodes.

With polymerization duration and Au3+ concentration of the electrolyte regulated, a desirable nitrate-doped polypyrrole ion-selective membrane (PPy(NO3-)-ISM) and Au solid contact layer of anticipate surface morphology were obtained, and the performance of nitrate all-solid ion-selective electrodes (NS ISEs) was improved. It was found that the roughest PPy(NO3-)-ISM remarkably increases the actual contact surface area of the PPy(NO3-)-ISMs with nitrate solution, which leads to better adsorption of NO3- ions upon the PPy(NO3-)-ISMs, and produces a larger number of electrons. The most hydrophobic Au solid contact layer avoids the formation of the aqueous layer at the interface between the PPy(NO3-)-ISM and Au solid contact layer, and ensures unimpeded transporting of the produced electrons. The PPy-Au-NS ISE for polymerization duration 1800 s and at Au3+ concentration 2.5 mM of the electrolyte displays an optimal nitrate potential response, including a Nernstian slope of 54.0 mV/dec, LOD of 1.1 × 10-4 M, rapid average response time less than 1.9 s, and long-term stability of more than 5 weeks. This indicates that the PPy-Au-NS ISE is an effective working electrode for the electrochemical determination of NO3- concentration.

Investigation on Vibration Characteristics of Thin-Walled Steel Structures under Shock Waves.

Thin-walled steel structures, prized for their lightweight properties, material efficiency, and excellent mechanical characteristics, find wide-ranging applications in ships, aircraft, and vehicles. Given their typical role in various types of equipment, it is crucial to investigate the response of thin-walled structures to shock waves for the design and development of innovative equipment. In this study, a shock tube was employed to generate shock waves, and a rectangular steel plate with dimensions of 2400.0 mm × 1200.0 mm × 4.0 mm (length × width × thickness) was designed for conducting research on transient shock vibration. The steel plate was mounted on an adjustable bracket capable of moving vertically. Accelerometers were installed on the transverse and longitudinal symmetric axes of the steel plate. Transient shock loading was achieved at nine discrete positions on a steel plate by adjusting the horizontal position of the shock tube and the vertical position of the adjustable bracket. For each test, vibration data of eight different test positions were obtained. The wavelet transform (WT) and the improved ensemble empirical mode decomposition (EEMD) methods were introduced to perform a time-frequency analysis on the vibration of the steel plate. The results indicated that the EEMD method effectively alleviated the modal aliasing in the vibration response decomposition of thin-walled structures, as well as the incompletely continuous frequency domain issue in WT. Moreover, the duration of vibration at different frequencies and the variation of amplitude size with time under various shock conditions were determined for thin-walled structures. These findings offer valuable insights for the design and development of vehicles with enhanced resistance to shock wave loading.

CCND1-associated ceRNA network reveal the critical pathway of TPRG1-AS1-hsa-miR-363-3p-MYO1B as a prognostic marker for head and neck squamous cell carcinoma.

Head and neck squamous cell carcinoma (HNSC) is one of the leading causes of cancer death globally, yet there are few useful biomarkers for early identification and prognostic prediction. Previous studies have confirmed that CCND1 amplification is closely associated with head and neck oncogenesis, and the present study explored the ceRNA network associated with CCND1. Gene expression profiling of the Head and Neck Squamous Cell Carcinoma (HNSC) project of The Cancer Genome Atlas (TCGA) program identified the TPRG1-AS1-hsa-miR-363-3P-MYO1B gene regulatory axis associated with CCND1. Further analysis of the database showed that MYOB was regulated by methylation in head and neck tumors, and functional enrichment analysis showed that MYO1B was involved in "actin filament organization" and "cadherin binding ". Immune infiltration analysis suggested that MYO1B may influence tumorigenesis and prognosis by regulating the immune microenvironment of HNSC. MYO1B enhanced tumor spread through the EMT approach, according to epithelial mesenchymal transition (EMT) characterisation. We analyzed both herbal and GSCALite databases and found that CCND1 and MYO1B have the potential as predictive biomarkers for the treatment of HNSC patients. RT-qPCR validated bioinformatic predictions of gene expression in vitro cell lines. In conclusion, we found a CCND1-related ceRNA network and identified the novel TPRG1-AS1-hsa-miR-363-3p-MYO1B pathway as a possible HNSC diagnostic biomarker and therapeutic target.

Gallium Triggers Ferroptosis through a Synergistic Mechanism.

The gallium ion (Ga3+ ) has long been believed to disrupt ferric homeostasis in the body by competing with iron cofactors in metalloproteins, ultimately leading to cell death. This study revealed that through an indirect pathway, gallium can trigger ferroptosis, a type of non-apoptotic cell death regulated by iron. This is exemplified by the gallium complex of the salen ligand (Ga-1); we found that Ga-1 acts as an effective anion transporter that can affect the pH gradient and change membrane permeability, leading to mitochondrial dysfunction and the release of ferrous iron from the electron transfer chain (ETC). In addition, Ga-1 also targeted protein disulfide isomerases (PDIs) located in the endoplasmic reticulum (ER) membrane, preventing the repair of the antioxidant glutathione (GSH) system and thus enforcing ferroptosis. Finally, a combination treatment of Ga-1 and dietary polyunsaturated fatty acids (PUFAs), which enhances lipid peroxidation during ferroptosis, showed a synergistic therapeutic effect both in vitro and in vivo. This study provided us with a strategy to synergistically induce Ferroptosis in tumor cells, thereby enhancing the anti-neoplastic effect.

3D-Printed Piezoelectric Scaffolds with Shape Memory Polymer for Bone Regeneration.

The application of piezoelectric nanoparticles with shape memory polymer (SMP) to 3D-printed piezoelectric scaffolds for bone defect repair is an attractive research direction. However, there is a significant difference in dielectric constants between the piezoelectric phase and polymer phase, limiting the piezoelectric property. Therefore, novel piezoelectric acrylate epoxidized soybean oil (AESO) scaffolds doped with piezoelectric Ag-TMSPM-pBT (ATP) nanoparticles (AESO-ATP scaffolds) are prepared via digital light procession 3D-printing. The Ag-TMSPM-pBT nanoparticles improve the piezoelectric properties of the AESO scaffolds by TMSPM covalent functionalization and conductive Ag nanoparticles. The AESO scaffolds doped with 10 wt% Ag-TMSPM-pBT nanoparticles (AESO-10ATP scaffolds) exhibit promising piezoelectrical properties, with a piezoelectric coefficient (d33) of 0.9 pC N-1 and an output current of 146.4 nA, which are close to the piezoelectric constants of bone tissue. In addition, these scaffolds exhibit good shape memory function and can quickly recover their original shape under near-infrared (NIR) light irradiation. The results of osteogenesis capability evaluation indicate that the AESO-10ATP scaffolds can promote osteogenic differentiation of BMSCs in vitro and bone defect repair in vivo, indicating the 3D-printed AESO-10ATP piezoelectric scaffolds may have great application potential for bone regeneration.

Early life growth and developmental trajectory in children with biliary atresia undergoing primary liver transplantation.

Objective: To clarify the early growth and developmental characteristics of children with biliary atresia (BA) undergoing primary liver transplantation (pLT). Methods: A prospective cohort study, which specifically focused on BA-pLT children, was conducted after the diagnosis of BA by following the children at the time of pLT and 1, 3, 5, 7 months and 1 year after pLT for growth and developmental monitoring. The growth parameters were calculated according to the WHO standard, and the developmental status was assessed using Denver Developmental Screening Tests. Results: A total of 48 BA children who received pLT at the age of 5.00 ± 0.94 months were analyzed. The weight-for-age Z-value (ZW) and length-for-age Z-value (ZL) were higher than the head circumference-for-age Z-value (ZHC) at pLT (P = 0.002 and 0.02), but they were all lower than the WHO growth standard (Z = 0) (P < 0.001). The ZW and ZHC decreased first and then returned to the population level at 1 year after pLT, while the ZL only returned to the preoperative status and was lower than the ZW and ZHC (P < 0.001). Developmental screening showed that 35% (17/48) of the children were defined as suspicious and 15% (7/48) were abnormal at 1-4 months after pLT, the most likely time to be suspected of developmental delay. At 1 year after pLT, gross motor skill delay still existed (12/45, 27%), and language skill delay began to appear (4/45, 9%). Conclusions: BA-pLT children suffer from growth and developmental problems. Low ZHC is the main growth problem before pLT, while low ZL is the problem after pLT. Developmental delays are significant after pLT, especially in motor and language skills. The current study suggested that further studies are warranted to clarify the long-term growth and developmental outcomes of BA-pLT children, to compare them with children undergoing the Kasai procedure and to explore their influencing factors and possible mechanisms.

All fabric and flexible wearable sensors for simultaneous sweat metabolite detection and high-efficiency collection.

Wearable sweat electrochemical sensors have attracted wide attention due to their advantages of non-invasive, portable, real-time monitoring, etc. However, existing sensors still have some problems with efficient sweat collection. Microfluidic channel technology and electrospinning technology are commonly used to collect sweat efficiently, but there are some limitations such as complex channel design and multiple spinning parameters. Besides, existing sensors are mostly based on flexible polymers, such as, PET, PDMS, PI and PI, which have limited wearability and permeability. Based on the above, all fabric and dual-function flexible wearable sweat electrochemical sensor is proposed in this paper. This sensor uses fabric as the raw material to implement the directional transport of sweat and the multi-component integrated detection dual functions. Meanwhile, the high-efficiency collection of sweat is obtained by a Janus fabric, wherein one side of the selected silk is superhydrophobic graft treated and the other side is hydrophilic plasma treated. Therefore, the resulting Janus fabric can effectively transfer sweat from the skin side to the electrode, and the minimum sweat droplet can reach 0.2 µL to achieve micro-volume collection. Besides, the patterned sensor, made of silk-based carbon cloth, is fabricated using a simple laser engraving, which could detect Na+, pH, and glucose instantaneously. As a result, these proposed sensors can achieve good sensing performance and high-efficiency sweat collection dual functionality; moreover, it has good flexibility and comfortable wearability.

The influence of claw morphology on gripping efficiency.

This paper considers the effects of claw morphology on the gripping efficiency of arboreal (Varanus varius) and burrowing (Varanus gouldii and Varanus panoptes) lizards. To ensure a purely morphological comparison between the lizards, we circumvent the material effects of claws from different species, by modelling and testing claw replicates of the same material properties. We correlate climbing efficiency to critical morphological features including; claw height (hc), width (wc), length (lc), curvature () and tip angle (γ), which are expressed as ratios to normalise mechanically beneficial claw structures. We find that there is strong correlation between the static grip force Fsg and the claw aspect and the cross-sectional rigidity ratio , and milder correlation (i.e. higher scatter) with the profile rigidity ratio . These correlations are also true for the interlocking grip force Fint over different shaped and sized protuberances, though we note that certain protuberance size-shape couplings are of detriment to the repeatability of Fint. Of the three lizard species, the claws of the arboreal (V. varius) are found to be superior to those of the burrower lizards (V. gouldii and V. panoptes) as a result of the V. varius claws having a smaller aspect, a higher cross-sectional rigidity ratio and a small profile rigidity ratio, which are deemed noteworthy morphological parameters that influence a claw's ability to grip effectively.

Preparation and Properties of Poly(butylene adipate-co-terephthalate)/thermoplastic Hydroxypropyl Starch Composite Films Reinforced with Nano-Silica.

The use of biodegradable plastics is gradually increasing, but its expensive cost limits promotion. In this study, poly(butylene adipate-co-terephthalate)/thermoplastic hydroxypropyl starch reinforced with nano-silica (PBAT/TPHSg-SiO2) composite films with high hydroxypropyl starch content were prepared in a two-step process. The effect of reinforced thermoplastic hydroxypropyl starch on the mechanical, thermal, processing properties, and micromorphology of the composite films was investigated. The results showed that the tensile strength of the composite films was significantly improved by the addition of nano-silica, with 35% increase in horizontal tensile strength and 21% increase in vertical tensile strength after the addition of 4 phr of nano-silica. When the content of thermoplastic hydroxypropyl starch reinforced with nano-silica (TPHSg-4SiO2) is 40%, the horizontal and vertical tensile strengths of the films are 9.82 and 12.09 MPa, respectively, and the elongation at break of the films is over 500%. Electron micrographs show that TPHSg-4SiO2 is better homogeneously dispersed in the PBAT and exhibits a bi-continuous phase structure at a TPHSg-4SiO2 content of 40%. In this study, the blowing PBAT/TPHSg-4SiO2 composite films effectively reduce the cost and still show better mechanical properties, which are suitable for packaging applications.