RESUMEN
Nanostructured metal assemblies on thin and ultrathin polymeric films enable state of the art technologies and have further potential in diverse fields. Rational design of the structure-function relationship is of critical importance but aggravated by the scarcity of systematic studies. Here, we studied the influence of the interplay between metal and polymer surface free energy and reactivity on the evolution of electric conductivity and the resulting morphologies. In situ resistance measurements during sputter deposition of Ag, Au, Cu and Ni films on ultrathin reticulated polymer films collectively reveal metal-insulator transitions characteristic for Volmer-Weber growth. The different onsets of percolation correlate with interfacial energy and energy of adhesion weakly but as expected from ordinary wetting theory. A more pronounced trend of lower percolation thickness for more reactive metals falls in line with reported correlations. Ex situ grazing incidence small angle X-ray scattering experiments were performed at various thicknesses to gain an insight into cluster and film morphology evolution. A novel approach to interpret the scattering data is used where simulated pair distance distributions of arbitrary shapes and arrangements can be fitted to experiments. Detailed approximations of cluster structures could be inferred and are discussed in view of the established parameters describing film growth behavior.
RESUMEN
Dispersion of carbon nanotubes and carbon nanofibers is a crucial processing step in the production of polymer-based nanocomposites and poses a great challenge due to the tendency of nanofillers to agglomerate. One of the most effective methods for dispersion is the use of a three-roll mill, which is a well-established method and results in agglomerates below 5 µm. Nevertheless, this process is time-consuming and thus a limiting factor for industrial applications. Our aim was to establish an easy and efficient ultrasonic dispersion process, characterize the dispersion parameters, and compare both methods, ultrasonication and the three-roll mill. We applied rheological tests and analyzed the agglomerate sizes by an image fit of the microscopy images. All these analyses combined deliver a valuable set of information about the dispersion's quality and, therefore, allows the improvement and further adaptation of the dispersion process.
RESUMEN
In this study, different surface modifications were performed on a Cobalt-Chrome-Molybdenum (CoCrMo) alloy and the effects on cell viability and cytotoxicity as well as the adhesion potential of human osteoblasts (hFOB) and their inflammation reaction were investigated in vitro. CoCrMo discs were coated with TiN, with polished and porous coated surfaces, or with pure titanum (cpTi) surfaces and examined by Scanning Electron Microscopy to evaluate surface modifications. In vitro cell viability, adhesion behaviour, and expression of inflammation markers of hFOB human osteoblasts were measured via CellTiter-Glo, CytoTox, ELISA, and RT-PCR respectively. All results were compared to CoCrMo without surface modifications. The biocompatibility data showed high compatibility for the TiN hard coatings. Likewise, the porous surface coating increased cell viability significantly, compared to an untreated CoCrMo alloy. None of the investigated materials influenced cytotoxicity. Different surface modifications did not influence expression of fibronectin, although TiN, porous surface coatings and polished surfaces showed highly significant reductions in integrin subunit expression. In addition to the regulation of adhesion potential these three surfaces stimulated an anti-inflammatory response by osteocytes. Improved biocompatibility and adhesion properties may contribute to better osteointegration of prosthetics.
Asunto(s)
Adhesión Celular/efectos de los fármacos , Aleaciones de Cromo/química , Materiales Biocompatibles Revestidos/química , Inflamación/tratamiento farmacológico , Molibdeno/farmacología , Osteoblastos/efectos de los fármacos , Titanio/química , Línea Celular , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Humanos , Ensayo de Materiales/métodos , Molibdeno/química , Propiedades de Superficie/efectos de los fármacosRESUMEN
Cellulose II aerogels are a highly porous class of biobased ultra-light-weight materials. They consist of interlinked networks of loosely aggregated cellulose fibrils. The latter typically have random orientation due to spontaneous phase separation triggered by addition of antisolvent to moleculardisperse cellulose solutions. Deceleration of phase separation has been recently proposed as a novel approach towards aerogels featuring preferred cellulose orientation. Here, we investigate the mechanical response of such oriented cellulose aerogels towards load up to 80% compression. Stress-strain curves were recorded and in situ small angle X-ray scattering (SAXS) was performed during compression test to obtain information about the structural alterations of the aerogel fibril networks on the nano-scale related to deformation. Using SAXS in addition, structural changes can be followed in much more detail than by recording stress-strain curves alone. Buckling and coalescence of fibers and a change in fibril orientation can be related to certain regimes in the stress-strain curve. If the loading axis is oriented parallel to the network orientation the aerogels show higher resilience towards the compression.
Asunto(s)
Celulosa/química , Geles/química , Nanoestructuras/química , Anisotropía , Cristalización , Guanidinas/química , Conformación Molecular , Transición de Fase , Porosidad , Presión , Solventes/química , Relación Estructura-ActividadRESUMEN
Osteosarcoma is the most common primary bone cancer type in humans. It is predominantly found in young individuals, with a second peak later in life. The tumour is formed by malignant osteoblasts and consists of collagenous, sometimes also mineralized, bone matrix. While the morphology of osteosarcoma has been well studied, there is virtually no information about the nanostructure of the tumour and changes in mineralization on the nanoscale level. In the present paper, human bone tissue inside, next to and remote from a sclerosing osteosarcoma was studied with small angle x-ray scattering, x-ray diffraction and electron microscopy. Quantitative evaluation of nanostructure parameters was combined with high resolution, large area mapping to obtain microscopic images with nanostructure parameter contrast. It was found that the tumour regions were characterized by a notable reduction in mineral particle size, while the mineral content was even higher than that in normal bone. Furthermore, the normal preferential orientation of mineral particles along the longitudinal direction of corticalis or trabeculae was largely suppressed. Also the bone mineral crystal structure was affected: severe crystal lattice distortions were detected in mineralized tumour tissue pointing to a different ion substitution of hydroxyl apatite in tumorous tissue than in healthy tissue.
Asunto(s)
Calcificación Fisiológica , Osteosarcoma/diagnóstico por imagen , Huesos/diagnóstico por imagen , Cristalización , Durapatita/química , Humanos , Microscopía Electrónica , Minerales/química , Osteosarcoma/ultraestructura , Tamaño de la Partícula , Dispersión del Ángulo Pequeño , Difracción de Rayos XRESUMEN
Sample preparation is an important step when testing the mechanical properties of materials. Especially, when carbon nanotubes (CNT) are added to epoxy resin, the increase in viscosity complicates the casting of testing specimens. We present a vacuum casting approach for different geometries in order to produce specimens from functional nanocomposites that consist of epoxy matrix and oxidized multi-walled carbon nanotubes (MWCNTs). The nanocomposites were characterized with various mechanical tests that showed improved fracture toughness, bending and tensile properties performance by addition of oxidized MWCNTs. Strengthening mechanisms were analyzed by SEM images of fracture surfaces and in-situ imaging by digital image correlation (DIC).
Asunto(s)
Resinas Epoxi/química , Fenómenos Mecánicos , Nanocompuestos/química , Nanotubos de Carbono/química , Vacio , Ensayo de Materiales , Nanocompuestos/ultraestructura , Nanotubos de Carbono/ultraestructura , Porosidad , Resistencia a la Tracción , ViscosidadRESUMEN
Carbon nanotubes (CNT) provide an outstanding property spectrum which can be used to improve a wide range of materials. However, the transfer of properties from the nanoscale to a macroscopic material is a limiting factor. Different approaches of functionalizing the surface of a CNT can improve the interaction with the surrounding matrix but is connected to difficult and expensive treatments, which are usually inconvenient for industrial applications. Here, a simple and eco-friendly method is presented for the oxidation of CNT, where hydrogen peroxide (H2O2) is the only chemical needed and no toxic emissions are released. Also, the extensive step of the incorporation of CNT to an epoxy matrix is simplified to an ultrasonic dispersion in the liquid hardener component. The effectiveness is proven by mechanical tests of produced CNT/CFRP and compared to a conventional processing route. The combination of those simple and cost efficient strategies can be utilized to produce multiscale composites with improved mechanical performance in an ecological and economical way.
RESUMEN
Assembly of (bio)polymers into long-range anisotropic nanostructured gels and aerogels is of great interest in advanced material engineering since it enables directional tuning of properties, such as diffusivity, light, heat, and sound propagation, cell proliferation, and mechanical properties. Here we present an approach toward anisotropic cellulose II gels and aerogels that employs specific diffusion and phase separation phenomena occurring during decelerated infusion of an antisolvent into isotropic supercooled solutions of cellulose in an ionic liquid to effectuate supramolecular assembly of cellulose in anisotropic colloidal network structures. At the example of the distillable ionic liquid 1,1,3,3-tetramethylguanidinium acetate, the antisolvent ethanol, and spherocylindrical porous molds, we demonstrate that the proposed facile, environmental-benign and versatile route affords gels and aerogels whose specific anisotropic nanomorphology and properties reflect the preferred supramolecular cellulose orientation during phase separation, which is perpendicular to the direction of antisolvent diffusion. Comprehensive X-ray scattering experiments revealed that the (aero)gels are composed of an interconnected, fibrous, highly crystalline (CrI ≈ 72%), cellulose II with a cross-sectional Guinier radius of the struts of about 2.5 nm, and an order parameter gradient from about 0.1 to 0.2. The obtained gels and aerogels feature high specific surface areas (350-630 m2 g-1) and excellent mechanical properties like high toughness (up to 471 kJ m-3 for a 60% compression, ρB = 80 mg cm-3) and resilience (up to 13.4 kJ m-3, ρB = 65 mg cm-3).
Asunto(s)
Celulosa/química , Congelación , Geles/química , Líquidos Iónicos/química , Nanofibras/química , Polímeros/química , Solventes/química , Anisotropía , Transición de Fase , Porosidad , Conductividad TérmicaRESUMEN
Protein-A chromatography is the most widely used chromatography step in downstream processing of antibodies. A deeper understanding of the influence of the surface topology on a molecular/nanoscale level on adsorption is essential for further improvement. It is not clear if the binding is homogenous throughout the entire bead network. We followed the protein absorption process and observed the formation of a protein layer on fibers of chromatography resin in a time-resolved manner in nanoscale. To characterize the changes in the antibody-protein-A ligand complex, small angle X-ray scattering was employed using a miniaturized X-ray-transparent chromatography column packed with a MabSelect SuRe resin. Antibody-free MabSelect SuRe resin fiber had an average radius of 12 nm and the protein layer thickness resulting from antibody adsorption was 5.5 and 10.4 nm for fiber and junctions, respectively under applied native conditions. We hypothesize that an average of 1.2 antibodies were adsorbed per protein-A ligand tetramer bound to the outermost units. In contrast to previous studies, it was therefore possible for the first time to directly correlate the nanostructure changes inside the column, which is otherwise a black box, with the adsorption and elution process.
Asunto(s)
Anticuerpos Monoclonales/química , Nanoestructuras/análisis , Proteína Estafilocócica A/química , Adsorción , Cromatografía de Afinidad , Tamaño de la Partícula , Dispersión del Ángulo Pequeño , Propiedades de Superficie , Difracción de Rayos XRESUMEN
Conventional analysis of the preferred orientation of crystallites (crystallographic texture) involves X-ray diffraction with area detectors and 2D data output. True 3D, spatially resolved information requires sample rotation in the beam, thus changing the probed volume, which introduces signal smearing and precludes the scanning of complex structures. This obstacle has been overcome by energy-dispersive Laue diffraction. A method has been devised to reach a large portion of reciprocal space and translate the X-ray photon energy into the missing third dimension of space. Carbon fibers and lobster exoskeleton as examples of biomineralized tissue have been analyzed. The major potential of this method lies in its "one-shot" nature and the direct 3D information requiring no previous knowledge of the sample. It allows the texture of large samples with complex substructures to be scanned and opens up the conceptual possibility of following texture changes inâ situ, for example, during crystallization.
RESUMEN
The impact of selected cellulose solvent systems based on the principal constituents tetrabutylammonium fluoride (TBAF), 1-ethyl-3-methyl-1H-imidazolium-acetate, N-methylmorpholine-N-oxide, or calcium thiocyanate octahydrate (CTO) on the properties of cellulose II aerogels prepared from these solvent systems has been investigated as a means towards tailoring cellulose aerogel properties with respect to specific applications. Cotton linters were used as representative plant cellulose. Cellulose was coagulated from solutions with comparable cellulose content, and dried with supercritical carbon dioxide after solvent exchange. The resulting bulk aerogels were comprehensively morphologically and mechanically tested to relate structure and mechanical properties. Different solvent systems caused considerable differences in the properties of the bulk samples, such as internal surface area (nitrogen sorption), morphology, porosity (He pycnometry, thermoporosimetry), and mechanical stability (compression testing). The results of SAXS, WAXS, and solid-state 13C NMR spectroscopy suggest that this is due to different mechanisms of cellulose self-assembling on the supramolecular and nanostructural level, respectively, as reflected by the broad ranges of cellulose crystallinity, fibril diameter, fractal dimension and skeletal density. Both solid state NMR and WAXS experiments confirmed the sole existence of the cellulose II allomorph for all aerogels, with crystallinity reaching a maximum of 46-50 % for CTO-derived aerogels. Generally, higher fibril diameter, degree of crystallinity, hence increased skeletal density were associated with good preservation of shape and dimension throughout conversion of lyogels to aerogels, and enhanced mechanical stability, but somewhat reduced specific surface area. Amorphous, yet highly rigid aerogels derived from TBAF/DMSO mixtures deviated from this trend, most likely due to their particular homogeneous and nanostructured morphology.
RESUMEN
This study investigated the distribution of the elemental constituents of Mg-based implants at various stages of the degradation process in surrounding bone tissue, with a focus on magnesium (Mg), as the main component of the alloy, and yttrium (Y), due to its potential adverse health effects. The measurements were performed on the implant-bearing thin sections of rat bone in a time series of implant degradation between one and 18 months. Micro X-ray fluorescence analysis (µXRF) with a special spectrometer meeting the requirements for the measurements of low-Z elements was used. It was found that the migration and accumulation behaviour of implant degradation products is element-specific. A sharp decrease in Mg was observed in the immediate vicinity of the interface and no specific accumulation or aggregation of Mg in the adjacent bone tissue was detected. By contrast, Y was found to migrate further into the bone over time and to remain in the tissue even after the complete degradation of the implant. Although the nature of Y accumulations must still be clarified, its potential health impact should be considered.
RESUMEN
Carbon microparticles were produced from organosolv lignin at 2000 °C under argon atmosphere following oxidative thermostabilisation at 250 °C. Scanning electron microscopy, X-ray diffraction, small-angle X-ray scattering, and electro-conductivity measurements revealed that the obtained particles were electrically conductive and were composed of large graphitic domains. Poly(lactic acid) filled with various amounts of lignin-derived microparticles showed higher tensile stiffness increasing with particle load, whereas strength and extensibility decreased. Electric conductivity was measured at filler loads equal to and greater than 25% w/w.
RESUMEN
The promising applications of core-shell nanoparticles in the biological and medical field have been well investigated in recent years. One remaining challenge is the characterization of the structure of the hydrated polymer shell. Here we use small-angle X-ray scattering (SAXS) to investigate iron oxide core-poly(ethylene glycol) brush shell nanoparticles with extremely high polymer grafting density. It is shown that the shell density profile can be described by a scaling model that takes into account the locally very high grafting density near the core. A good fit to a constant density region followed by a star-polymer-like, monotonously decaying density profile is shown, which could help explain the unique colloidal properties of such densely grafted core-shell nanoparticles. SAXS experiments probing the thermally induced dehydration of the shell and the response to dilution confirmed that the observed features are associated with the brush and not attributed to structure factors from particle aggregates. We thereby demonstrate that the structure of monodisperse core-shell nanoparticles with dense solvated shells can be well studied with SAXS and that different density models can be distinguished from each other.
RESUMEN
Mineralized tissues are produced by most living organisms for load and impact functions. In contrast, the jaws of the clam worm, Nereis, are hard without mineralization. However, they are peculiarly rich in halogens, which are associated with a variety of post-translationally modified amino acids, many of which are multiply halogenated by chlorine, bromine, and/or iodine. Several of these modified amino acids, namely dibromohistidine, bromoiodohistidine, chloroiodotyrosine, bromoiodotyrosine, chlorodityrosine, chlorotrityrosine, chlorobromotrityrosine, and bromoiodotrityrosine, have not been previously reported. We have found that the distributions of Cl, Br, and I differ: Cl is widespread whereas Br and I, although not colocalized, are concentrated in proximity to the external jaw surfaces. By using nanoindentation, we show that Br and I are unlikely to play a purely mechanical role, but that the local Zn and Cl concentrations and jaw microstructure are the prime determinants of local jaw hardness. Several of the post-translationally modified amino acids are akin to those found in various sclerotized structures of invertebrates, and we propose that they are part of a cross-linked protein casing.
Asunto(s)
Halógenos/metabolismo , Maxilares/metabolismo , Poliquetos/metabolismo , Proteínas/metabolismo , Aminoácidos/análisis , Animales , Fenómenos Biomecánicos , Bromo/análisis , Cloro/análisis , Microanálisis por Sonda Electrónica , Halógenos/análisis , Dureza , Histidina/análogos & derivados , Histidina/análisis , Hidrólisis , Yodo/análisis , Maxilares/anatomía & histología , Maxilares/química , Espectrometría de Masas , Poliquetos/fisiología , Procesamiento Proteico-Postraduccional , Proteínas/química , Tirosina/análogos & derivados , Tirosina/análisis , Zinc/análisisRESUMEN
Most organisms consist of a functionally adaptive assemblage of hard and soft tissues. Despite the obvious advantages of reinforcing soft protoplasm with a hard scaffold, such composites can lead to tremendous mechanical stresses where the two meet. Although little is known about how nature relieves these stresses, it is generally agreed that fundamental insights about molecular adaptation at hard/soft interfaces could profoundly influence how we think about biomaterials. Based on two noncellular tissues, mussel byssus and polychaete jaws, recent studies suggest that one natural strategy to minimize interfacial stresses between adjoining stiff and soft tissue appears to be the creation of a "fuzzy" boundary, which avoids abrupt changes in mechanical properties. Instead there is a gradual mechanical change that accompanies the transcendence from stiff to soft and vice versa. In byssal threads, the biochemical medium for achieving such a gradual mechanical change involves the elegant use of collagen-based self-assembling block copolymers. There are three distinct diblock copolymer types in which one block is always collagenous, whereas the other can be either elastin-like (soft), amorphous polyglycine (intermediate), or silk-like (stiff). Gradients of these are made by an incrementally titrated expression of the three proteins in secretory cells the titration phenotype of which is linked to their location. Thus, reflecting exactly the composition of each thread, the distal cells secrete primarily the silk- and polyglycine-collagen diblocks, whereas the proximal cells secrete the elastin- and polyglycine-collagen diblocks. Those cells in between exhibit gradations of collagens with silk or elastin blocks. Spontaneous self-assembly appears to be by pH triggered metal binding by histidine (HIS)-rich sequences at both the amino and carboxy termini of the diblocks. In the polychaete jaws, HIS-rich sequences are expanded into a major block domain. Histidine predominates at over 20 mol % near the distal tip and diminishes to about 5 mol % near the proximal base. The abundance of histidine is directly correlated to transition metal content (Zn or Cu) as well as hardness determined by nanoindentation. EXAFS analyses of the jaws indicate that transition metals such as Zn are directly bound to histidine ligands and may serve as cross-linkers.
Asunto(s)
Biopolímeros/química , Animales , Evolución Molecular , Humanos , Estructura MolecularRESUMEN
Higher animals typically rely on calcification to harden certain tissues such as bones and teeth. Some notable exceptions can be found in invertebrates: The fangs, teeth, and mandibles of diverse arthropod species have been reported to contain high levels of zinc. Considerable quantities of zinc also occur in the jaws of the marine polychaete worm Nereis sp. High copper levels in the polychaete worm Glycera dibranchiata recently were attributed to a copper-based biomineral reinforcing the jaws. In the present article, we attempt to unravel the role of zinc in Nereis limbata jaws, using a combination of position-resolved state-of-the-art techniques. It is shown that the local hardness and stiffness of the jaws correlate with the local zinc concentration, pointing toward a structural role for zinc. Zinc always is detected in tight correlation with chlorine, suggesting the presence of a zinc-chlorine compound. No crystalline inorganic phase was found, however, and results from x-ray absorption spectroscopy further exclude the presence of simple inorganic zinc-chlorine compounds in amorphous form. The correlation of local histidine levels in the protein matrix and zinc concentration leads us to hypothesize a direct coordination of zinc and chlorine to the protein. A comparison of the role of the transition metals zinc and copper in the jaws of two polychaete worm species Nereis and Glycera, respectively, is presented.
Asunto(s)
Poliquetos/anatomía & histología , Zinc/análisis , Animales , Cloro/análisis , Cobre/análisis , Histidina/química , Maxilares/metabolismo , Microscopía Electrónica de Rastreo , Espectrofotometría , Rayos X , Zinc/químicaRESUMEN
Biominerals are widely exploited to harden or stiffen tissues in living organisms, with calcium-, silicon-, and iron-based minerals being most common. In notable contrast, the jaws of the marine bloodworm Glycera dibranchiata contain the copper-based biomineral atacamite [Cu2(OH)3Cl]. Polycrystalline fibers are oriented with the outer contour of the jaw. Using nanoindentation, we show that the mineral has a structural role and enhances hardness and stiffness. Despite the low degree of mineralization, bloodworm jaws exhibit an extraordinary resistance to abrasion, significantly exceeding that of vertebrate dentin and approaching that of tooth enamel.
Asunto(s)
Cloruros/análisis , Cobre/análisis , Minerales/análisis , Poliquetos/química , Animales , Fenómenos Biomecánicos , Cloruros/química , Cloruros/fisiología , Cloro/análisis , Cobre/química , Cobre/fisiología , Cristalización , Dentina/química , Microanálisis por Sonda Electrónica , Dureza , Maxilares/química , Microscopía Electrónica , Microscopía Electrónica de Rastreo , Poliquetos/anatomía & histología , Poliquetos/fisiología , Proteínas/análisis , Proteínas/química , Dispersión de Radiación , Difracción de Rayos X , Rayos XRESUMEN
An electrochemical synthesis strategy for the production of nanostructured films was developed by combining self-assembly of surfactant-inorganic aggregates at solid-liquid interfaces and an electrodeposition process. Through this approach high quality nanostructured ZnO films were cathodically deposited from a plating solution containing 0.1 wt % of sodium dodecyl sulfate (SDS). The resulting ZnO films possess lamellar structures with two different repeat distances, d001 = 31.7 A and d001* = 27.5 A, both of which feature well-defined long range order. Due to kinetically controlled surfactant-inorganic assembly during the deposition process, the film exhibits a wide distribution of the stacking directions of the ZnO layers, which will allow facile access of the guest molecules and analytes to the interlayers. The synthetic mechanism used here can be generalized to generate nanostructured films of other semiconducting and metallic materials with architectures that cannot be assembled by other means.