Three-Dimensional Pore Structure Characterization of Bituminous Coal and Its Relationship with Adsorption Capacity.

Bituminous coal reservoirs exhibit pronounced heterogeneity, which significantly impedes the production capacity of coalbed methane. Therefore, obtaining a thorough comprehension of the pore characteristics of bituminous coal reservoirs is essential for understanding the dynamic interaction between gas and coal, as well as ensuring the safety and efficiency of coal mine production. In this study, we conducted a comprehensive analysis of the pore structure and surface roughness of six bituminous coal samples (1.19% < Ro,max < 2.55%) using various atomic force microscopy (AFM) techniques. Firstly, we compared the microscopic morphology obtained through low-pressure nitrogen gas adsorption (LP-N2-GA) and AFM. It was observed that LP-N2-GA provides a comprehensive depiction of various pore structures, whereas AFM only allows the observation of V-shaped and wedge-shaped pores. Subsequently, the pore structure analysis of the coal samples was performed using Threshold and Chen's algorithms at ×200 and ×4000 magnifications. Our findings indicate that Chen's algorithm enables the observation of a greater number of pores compared to the Threshold algorithm. Moreover, the porosity obtained through the 3D algorithm is more accurate and closely aligns with the results from LP-N2-GA analysis. Regarding the effect of magnification, it was found that ×4000 magnification yielded a higher number of pores compared to ×200 magnification. The roughness values (Rq and Ra) obtained at ×200 magnification were 5-14 times greater than those at ×4000 magnification. Interestingly, despite the differences in magnification, the difference in porosity between ×200 and ×4000 was not significant. Furthermore, when comparing the results with the HP-CH4-GA experiment, it was observed that an increase in Ra and Rq values positively influenced gas adsorption, while an increase in Rsk and Rku values had an unfavorable effect on gas adsorption. This suggests that surface roughness plays a crucial role in gas adsorption behavior. Overall, the findings highlight the significant influence of different methods on the evaluation of pore structure. The 3D algorithm and ×4000 magnification provide a more accurate description of the pore structure. Additionally, the variation in 3D surface roughness was found to be related to coal rank and had a notable effect on gas adsorption.

Study on the influence pattern and efficiency enhanced mechanism of acoustic-chemical spray dust reduction.

To study the influence pattern and efficiency enhanced mechanism of acoustic-chemical spray method on dust reduction, a self-developed acoustic excitation test platform, viscosity test, surface tension experiment and sinking experiments were used to investigate the chemical spray properties and the wetting behavior of coal dust excited by acoustic waves. The self-developed acoustic-chemical spray dust reduction simulation platform was used to study the influence of acoustic waves on coal dust reduction effect and its efficiency enhanced mechanism. The results showed that the surface tension and viscosity of the chemical spray solution fluctuated between 0.4 mN/m and 0.4 mPa·s along with the variations in acoustic wave frequency and sound pressure level (SPL), thereby confirming that acoustic waves had on effected on chemical spray solution properties. However, the wetting time of the chemical spray solution on coal dust increased by 33.64 % at an acoustic frequency (f) of 1300 Hz and SPL of 120 dB because of the liquid interface vibrations caused by acoustic waves. With an increasing of acoustic frequency, the dust reduction efficiency demonstrated a parabolic trend and reached its maximum value at f = 1300 Hz. The dust reduction efficiency also increased exponentially along with increasing SPL. Acoustic waves not only increased the collision frequency between particles and droplets by changing the trajectory of dust but also accelerated the wetting and agglomeration effect of chemical spray reagents on coal dust by causing vibrations at the gas-liquid interface, thereby enhancing the dust reduction efficiency. Compared to the dust reduction efficiency of chemical spray technology, the total dust reduction efficiency was increased by 8.53 %, and the respirable dust reduction efficiency was increased by 21.93 %. The effect of acoustic waves on the respirable dust reduction efficiency was more significant than that on total dust.

Evaluating Methane Adsorption Characteristics of Coal-Like Materials.

In order to investigate the methane adsorption characteristics of coal seam materials in a "solid-gas" coupling physical simulation experiment, activated alumina, silica gel, the 3Å molecular sieve, 4Å molecular sieve and 5Å molecular sieve were selected as adsorption materials. According to the pore structure and adsorption characteristics, coal samples at the Aiweiergou #1890 working face were prepared as compared materials. The WY-98A methane adsorption coefficient measuring instrument was used to carry out this adsorption experiment under different temperatures, particle sizes and moisture contents. The results suggested that the adsorption principles of three kinds of molecular sieves under multiple factors do not fully fit a Langmuir adsorption model, and cannot be used as adsorption materials. The changing trend of the adsorption increment of activated alumina and silica gel are similar to that of coal samples, so they can be used as a coal-like materials. The methane adsorption coefficient a value changing trends of activated alumina and silica gel appear to be the same as the Aiweiergou #1890 coal samples, but the results from silica gel are closer to that of coal samples. Thus, silica gel is preferred as the adsorption material. The result provides an experimental basis for the selection of methane-adsorbing materials and carrying out "solid-gas" coupling physical simulation experiments in a physically similar testing model.

ARP2/3 complex-mediated actin dynamics is required for hydrogen peroxide-induced stomatal closure in Arabidopsis.

Multiple cellular events like dynamic actin reorganization and hydrogen peroxide (H(2)O(2)) production were demonstrated to be involved in abscisic acid (ABA)-induced stomatal closure. However, the relationship between them as well as the underlying mechanisms remains poorly understood. Here, we showed that H(2)O(2) generation is indispensable for ABA induction of actin reorganization in guard cells of Arabidopsis that requires the presence of ARP2/3 complex. H(2)O(2) -induced stomatal closure was delayed in the mutants of arpc4 and arpc5, and the rate of actin reorganization was slowed down in arpc4 and arpc5 in response to H(2)O(2), suggesting that ARP2/3-mediated actin nucleation is required for H(2)O(2) -induced actin cytoskeleton remodelling. Furthermore, the expression of H(2)O(2) biosynthetic related gene AtrbohD and the accumulation of H(2)O(2) was delayed in response to ABA in arpc4 and arpc5, demonstrating that misregulated actin dynamics affects H(2)O(2) production upon ABA treatment. These results support a possible causal relation between the production of H(2)O(2) and actin dynamics in ABA-mediated guard cell signalling: ABA triggers H(2)O(2) generation that causes the reorganization of the actin cytoskeleton partially mediated by ARP2/3 complex, and ARP2/3 complex-mediated actin dynamics may feedback regulate H(2)O(2) production.

A signaling pathway linking nitric oxide production to heterotrimeric G protein and hydrogen peroxide regulates extracellular calmodulin induction of stomatal closure in Arabidopsis.

Extracellular calmodulin (ExtCaM) regulates stomatal movement by eliciting a cascade of intracellular signaling events including heterotrimeric G protein, hydrogen peroxide (H(2)O(2)), and Ca(2+). However, the ExtCaM-mediated guard cell signaling pathway remains poorly understood. In this report, we show that Arabidopsis (Arabidopsis thaliana) NITRIC OXIDE ASSOCIATED1 (AtNOA1)-dependent nitric oxide (NO) accumulation plays a crucial role in ExtCaM-induced stomatal closure. ExtCaM triggered a significant increase in NO levels associated with stomatal closure in the wild type, but both effects were abolished in the Atnoa1 mutant. Furthermore, we found that ExtCaM-mediated NO generation is regulated by GPA1, the Galpha-subunit of heterotrimeric G protein. The ExtCaM-dependent NO accumulation was nullified in gpa1 knockout mutants but enhanced by overexpression of a constitutively active form of GPA1 (cGalpha). In addition, cGalpha Atnoa1 and gpa1-2 Atnoa1 double mutants exhibited a similar response as did Atnoa1. The defect in gpa1 was rescued by overexpression of AtNOA1. Finally, we demonstrated that G protein activation of NO production depends on H(2)O(2). Reduced H(2)O(2) levels in guard cells blocked the stomatal response of cGalpha lines, whereas exogenously applied H(2)O(2) rescued the defect in ExtCaM-mediated stomatal closure in gpa1 mutants. Moreover, the atrbohD/F mutant, which lacks the NADPH oxidase activity in guard cells, had impaired NO generation in response to ExtCaM, and H(2)O(2)-induced stomatal closure and NO accumulation were greatly impaired in Atnoa1. These findings have established a signaling pathway leading to ExtCaM-induced stomatal closure, which involves GPA1-dependent activation of H(2)O(2) production and subsequent AtNOA1-dependent NO accumulation.