RESUMEN
Sulfur-driven autotrophic denitrification (SdAD) is a promising nitrogen removing process, but its applications were generally constrained by conventional electron donors (i.e., thiosulfate (Na2S2O3)) with high valence and limited bioavailability. Herein, an immobilized electron donor by loading elemental sulfur on the surface of polyurethane foam (PFSF) was developed, and its feasibility for SdAD was investigated. The denitrification efficiency of PFSF was 97.3%, higher than that of Na2S2O3 (91.1%). Functional microorganisms (i.e., Thiobacillus and Sulfurimonas) and their metabolic activities (i.e., nir and nor) were substantially enhanced by PFSF. PFSF resulted in the enrichment of sulfate-reducing bacteria, which can reduce sulfate (SO42-). It attenuated the inhibitory effect of SO42-, whereas the generated product (hydrogen sulfide) also served as an electron donor for SdAD. According to the economic evaluation, PFSF exhibited strong market potential. This study proposes an efficient and low-cost immobilized electron donor for SdAD and provides theoretical support to its practical applications.
Asunto(s)
Procesos Autotróficos , Desnitrificación , Nitrógeno , Azufre , Azufre/metabolismo , Azufre/química , Electrones , Thiobacillus/metabolismo , Poliuretanos/química , Sulfatos/metabolismo , Bacterias/metabolismo , Tiosulfatos/química , Tiosulfatos/farmacologíaRESUMEN
Sludge-based activated carbon (ZAC) was successfully employed as both adsorbent and catalyst for the oxidation process of reactive yellow 86 (RY86) and reactive black 5 (RB5). Physicochemical properties of the prepared sewage sludge-derived activated carbon were evaluated by N2 adsorption/desorption, Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The effects of parameters such as initial pH, H2O2 concentrations, ZAC dosages, dye concentrations and temperature on the removal of RY86 and RB5 were investigated. Kinetics results showed that the adsorption rates of RY86 and RB5 by ZAC can be approximated by the pseudo-first order model, and that the oxidation rates by Behnajady-Modirshahla-Ghanbery (BMG) model. Under the optimum conditions in the experiment, i.e. pH = 6.0, T = 303â K, [H2O2] = 49.5â mmol/L, [ZAC] = 4â g/L, [dyes] = 300â mg/L and t = 150â min, 99%, 88% and 84% of colour, COD and TOC were removed by Fenton -like oxidation for RY86, while for RB5, the three removal rates were 90%, 70% and 62%, respectively, indicating that sludge-based activated carbon can be used as an effective catalyst to oxidation of dyes by H2O2 from coloured wastewater.