RESUMEN
MnNb2 O6 anode has attracted much attention owing to its unique properties for holding Li ions. Unluckily, its application as a Li-ion battery anode is restricted by low capacity because of the inferior electronic conductivity and limited electron transfer. Previous studies suggest that structure and component optimization could improve its reversible capacity. This improvement is always companied by capacity increments, however, the reasons have rarely been identified. Herein, MnNb2 O6 -C nanofibers (NFs) with MnNb2 O6 nanoparticles (~15â nm) confined in carbon NFs, and the counterpart MnNb2 O6 NFs consisting of larger nanoparticles (40-100â nm) are prepared by electrospinning for clarifying this phenomenon. The electrochemical evaluations indicate that the capacity achieved by the MnNb2 O6 NF electrode presents an activation process and a degradation in subsequence. Meanwhile, the MnNb2 O6 -C NF electrode delivers high reversible capacity and ultra-stable cycling performance. Further analysis based on electrochemical behaviors and microstructure changes reveals that the partial structure rearrangement should be in charge of the capacity increment, mainly including pseudocapacitance increment. This work suggests that diminishing the dimensions of MnNb2 O6 nanoparticles and further confining them in a matrix could increase the pseudocapacitance-dominated capacity, providing a novel way to improve the reversible capacity of MnNb2 O6 and other intercalation reaction anodes.
RESUMEN
Surface-enhanced Raman scattering (SERS) has emerged as a valuable technique for molecular identification. Due to the characteristics of high sensitivity, excellent signal specificity, and photobleaching resistance, SERS has been widely used in the fields of environmental monitoring, food safety, and disease diagnosis. By attaching the organic molecules to the surface of plasmonic nanoparticles, the obtained SERS tags show high-performance multiplexing capability for biosensing. The past decade has witnessed the progress of SERS tags for liquid biopsy, bioimaging, and theranostics applications. This review focuses on the advances of SERS tags in biomedical fields. We first introduce the building blocks of SERS tags, followed by the summarization of recent progress in SERS tags employed for detecting biomarkers, such as DNA, miRNA, and protein in biological fluids, as well as imaging from in vitro cell, bacteria, tissue to in vivo tumors. Further, we illustrate the appealing applications of SERS tags for delineating tumor margins and cancer diagnosis. In the end, perspectives of SERS tags projecting into the possible obstacles are deliberately proposed in future clinical translation.
Asunto(s)
Nanopartículas del Metal , Neoplasias , ADN , Oro , Humanos , Biopsia Líquida , Neoplasias/diagnóstico por imagen , Medicina de Precisión , Espectrometría Raman/métodosRESUMEN
Layered metal sulfides are considered as promising candidates for potassium ion batteries (KIBs) owing to the unique interlayer passages for ion diffusion. However, the insufficient electronic conductivity, inevitable volume expansion, and sulfur loss hinder the promotion of K-ion storage performance. Herein, few-layered Ti3C2Tx nanosheets were selected as the multi-functional substrate for cooperating few-layered SnS2 nanosheets, constructing SnS2/Ti3C2Tx hetero-structural nanosheets (HNs) with the thickness as thin as about 5 nm. In this configuration, the formed Ti-S bonds provide robust interaction between SnS2 and Ti3C2Tx nanosheets, which hinders the agglomeration of SnS2 and the restack of Ti3C2Tx, endowing the hybrid material with robust nanostructure. Thus, the shortcomings of the SnS2 anode are muchly relieved. In this way, the as-prepared SnS2/Ti3C2Tx HNs electrode delivers reversible capacities of 462.1 mAh g-1 at 0.1 A g-1 and 166.1 mAh g-1 at 2.0 A g-1, respectively, and a capacity of 85.5 mAh g-1 is remained even after 460 cycles at 2.0 A g-1. These results are superior to those of the counterpart electrode, confirming aggressive promotion of K-ion storage performance of SnS2 anode brought by the cooperation of Ti3C2Tx, and presenting a reliable strategy to improve the electrochemical performance of sulfide anodes.
RESUMEN
Conversion anode materials such as Mn3O4 draw much attention due to their considerable theoretical capacity for lithium-ion batteries (LIBs). However, poor conductivity, slow solid-state Li-ion diffusion, and huge volume expansion of the active materials during charge/discharge lead to unsatisfied electrochemical performance. Despite several strategies like nanocrystallization, fabricating hierarchical nanostructures, and introducing a matrix are valid to address these crucial issues, the achieved electrochemical performance still needs to be further enhanced. What is worse, the matrix with less or no Li-ion storage activity may lower the achieved capacity of the electrodes. Herein, ultra-thin CuMnO2 nanosheets with the thickness of 5-8 nm were evaluated for LIBs. The ultra-thin sheet-like nanostructure offers sufficient contact areas with electrolyte and shortens the Li-ion diffusion distance. Moreover, the in-situ generated Mn and Cu along with their oxides could play the role of matrix and conductive agent in turn at different stages, relieving the stress brought by volume expansion. Therefore, the as-prepared ultra-thin CuMnO2 nanosheets electrode displays a remarkable reversible capacity, long cycling stability, and outstanding rate capability (a reversible capacity of 1160.5 mAh g-1 at 0.1A g-1 was retained after 100 cycles with a capacity retention of 95.1 %, and 717.8 mAh g-1 at 2.0 A g-1 after 400 cycles).
RESUMEN
Fluorescent silicon nanoparticles (SiNPs) were synthesized by a one-step, simple, and green method with 3-Aminopropyltriethoxysilane (APTES) and ascorbic acid (AA) as reaction agents. Subsequently, the SiNPs and AgNPs nanocomplex (SiNPs@AgNPs) was constructed as the probe for hydrogen peroxide (H2O2) detection. The fluorescence of SiNPs was quenched due to the surface plasmonic-enhanced energy transfer between SiNPs and AgNPs. Meanwhile, the color tends to be yellow due to the existence of AgNPs. As the AgNPs were etched by H2O2, the fluorescence recovers and color fadings. Based on the well-designed structure, the "off-on" fluorescence sensing and "on-off" color sensing platforms for H2O2 were fabricated. The as-synthesized materials were characterized by Fourier transform infrared (FT-IR) spectroscopy, dynamic light scattering (DLS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Fluorescence and UV-vis absorption spectra were used to evaluate the optical performance. The fabricated sensor exhibited a linear range of 1.0-100.0 µM, with a limit of detection of 0.36 µM for the fluorescence sensing of H2O2. Additionally, a linear range of 1.0-50.0 µM and a limit of detection of 0.45 µM were displayed for the detection of H2O2 by colorimetric assay. The feasibility in complex medium of the fabricated fluorescent and colorimetric dual-signal sensor was evaluated by the detection of H2O2 in phosphate buffer saline (PBS) and lake water samples.
Asunto(s)
Peróxido de Hidrógeno , Nanopartículas , Colorimetría , Silicio , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Conversion-alloy sulfide materials for potassium-ion batteries (KIBs) have attracted considerable attention because of their high capacities and suitable working potentials. However, the sluggish kinetics and sulfur loss result in their rapid capacity degeneration as well as inferior rate capability. Herein, a strategy that uses the confinement and catalyzed effect of Nb2 O5 layers to restrict the sulfur species and facilitate them to form sulfides reversibly is proposed. Taking Sb2 S3 anode as an example, Sb2 S3 and Nb2 O5 are dispersed in the core and shell layers of carbon nanofibers (C NFs), respectively, constructing core@shell structure Sb2 S3 -C@Nb2 O5 -C NFs. Benefiting from the bi-functional Nb2 O5 layers, the electrochemical reversibility of Sb2 S3 is stimulated. As a result, the Sb2 S3 -C@Nb2 O5 -C NFs electrode delivers the rapidest K-ion diffusion coefficient, longest cycling stability, and most excellent rate capability among the controlled electrodes (347.5 mAh g-1 is kept at 0.1 A g-1 after 100 cycles, and a negligible capacity degradation (0.03% per cycle) at 2.0 A g-1 for 2200 cycles is delivered). The enhanced K-ion storage properties are also found in SnS2 -C@Nb2 O5 -C NFs electrode. Encouraged by the stimulated reversibility of Sb2 S3 and SnS2 anodes, other sulfides with high electrochemical performance also could be developed for KIBs.
RESUMEN
BACKGROUND: Gestational diabetes mellitus (GDM) is a type of diabetes associated with pregnancy and may impose risks on both mother and fetus. Akt paeoniflorin was shown to have anti-inflammatory and anti-hyperglycemia properties and has a potential ability to suppress mammalian target of rapamycin (mTOR) signaling. The current study aimed to study the effect of paeoniflorin on GDM maternal, fetal, and placental characteristics in vivo. METHODS: Streptozotocin (STZ)-induced gestational diabetes rat model was used in our study. The expression levels of phosphorylation (p-) and total protein expression levels of protein kinase B (Akt), mTOR, serum/glucocorticoid regulated kinase 1 (SGK1), and eIF4E-binding protein 1 (4E-BP1) in the placenta were determined by Western blot assay. The blood glucose, insulin, and leptin levels were assessed using enzyme-linked immunosorbent assay (ELISA). RESULTS: We found that placental Akt/mTOR signaling was substantially upregulated in GDM patients compared with healthy donors. Paeoniflorin administration alleviates the dysregulation of blood glucose, leptin, and insulin levels in both maternal and fetal GDM rats. Paeoniflorin treatment suppressed the overactivation of Akt/mTOR signaling in placental tissues. More importantly, administration of paeoniflorin was beneficial for normalization of fetal size and body weight in the GDM rats. CONCLUSION: Our study suggested that application of paeoniflorin may serve as a potential therapeutical strategy for patients with GDM.
RESUMEN
Potassium-ion batteries (KIBs) are promising alternatives to lithium-ion batteries because of the abundance and low cost of K. However, an important challenge faced by KIBs is the search for high-capacity materials that can hold large-diameter K ions. Herein, copper oxide (CuO) nanoplates are synthesized as high-performance anode materials for KIBs. CuO nanoplates with a thickness of ≈20 nm afford a large electrode-electrolyte contact interface and short K+ ion diffusion distance. As a consequence, a reversible capacity of 342.5 mAh g-1 is delivered by the as-prepared CuO nanoplate electrode at 0.2 A g-1 . Even after 100 cycles at a high current density of 1.0 A g-1 , the capacity of the electrode remains over 206 mAh g-1 , which is among the best values for KIB anodes reported in the literature. Moreover, a conversion reaction occurs at the CuO anode. Cu nanoparticles form during the first potassiation process and reoxidize to Cu2 O during the depotassiation process. Thereafter, the conversion reaction proceeds between the as-formed Cu2 O and Cu, yielding a reversible theoretical capacity of 374 mAh g-1 . Considering their low cost, easy preparation, and environmental benignity, CuO nanoplates are promising KIB anode materials.
RESUMEN
Surface-enhanced Raman scattering (SERS) tags have attracted tremendous attention in diverse fields owing to their outstanding sensitivity and multiplexing capability. However, the selection of Raman dyes that can be immobilized onto metal nanoparticles is very limited, because certain chemical groups are needed in the dye molecules to interact either with the metal surface or through some intermediate layers. Here, we report a simple, rapid, and robust platform methodology for the one-pot preparation of Raman nanoprobes without the constraints of Raman dye chemical structures. We demonstrate this general approach by immobilizing dye molecules on silver nanoparticle surfaces that were difficult to incorporate previously, and show their applications in multiplexed immunohistochemistry (IHC). We expect that this platform nanotechnology will significantly expand the library of SERS tags and their biomedical uses.
RESUMEN
FcGBP was normally found in intestinal and colonic epithelia, gallbladder, cystic duct, bronchus, submandibular gland, cervix uteri and in fluids secreted by these cells in humans, and was down-regulated during colon carcinogenesis. We found FcGBP gene expression was decreased in HNSCC tissues compared to surgical safety border tissues while TGF-ß expression level increased in HNSCC tissues, and higher FcGBP expression level was correlated to longer OS time of HNSCC patients. FcGBP expression level was higher in HPV-positive HNSCC tissues compared to HPV-negative HNSCC tissues, while TGF-ß expression level was lower in HPV-positive HNSCC tissues. Gene expression level of FcGBP and TGF-ß was negatively correlated in HNSCC tissues. FcGBP expression level increased after HPV E6 overexpression in HPV-negative HNSCC cells, and TGF-ß could inhibit the up-regulation of FcGBP after HPV E6 or FcGBP overexpression in HPV-negative HNSCC cells. The migration capability was inhibited after FcGBP overexpression, and TGF-ß could counteract the inhibition of migration caused by FcGBP overexpression. FcGBP gene expression level was correlated to the expression levels of EMT markers. In conclusion, FCGBP expression was upregulated by HPV infection while inhibited by TGF-ß, and was correlated to the prognosis of HNSCC patients.
RESUMEN
Precise profiling of the sialic acid (SA) expression on the membrane of cancer cells is critical for early identification of cancers and assessment of cancer metastasis. However, the complex physiological environments often result in false positives with currently available imaging technologies. Herein, we have established a background-free surface-enhanced Raman scattering (SERS) imaging platform that allows high-precision profiling of SA expression in cancer cells and differentiation of clinically relevant cancer tissues with various metastasis degrees. Three-dimensional Raman imaging technique provided a deeper insight into visualizing the probe distribution and thus the SA expression at the single-cell level, without destructing the cells. This noninvasive, high-precision imaging technique could favor early diagnosis, staging, and monitoring therapeutic responses of cancers that are highly essential in clinical settings.
Asunto(s)
Perfilación de la Expresión Génica/métodos , Ácido N-Acetilneuramínico/genética , Neoplasias/diagnóstico por imagen , Espectrometría Raman/métodos , Animales , Humanos , Imagen Molecular , Ácido N-Acetilneuramínico/análisis , Metástasis de la Neoplasia/diagnóstico por imagen , Neoplasias/química , Análisis de la Célula IndividualRESUMEN
Single-molecule detection using surface-enhanced Raman spectroscopy (SERS) has attracted increasing attention in chemical and biomedical analysis. However, it remains a major challenge to probe single biomolecules by means of SERS hot spots owing to the small volume of hot spots and their random distribution on substrates. We here report an in situ hot-spot assembly method as a general strategy for probing single biomolecules. As a proof-of-concept, this proposed strategy was successfully used for the detection of single microRNA-21 (miRNA-21, a potential cancer biomarker) at the single-cell level, showing great capability in differentiating the expression of miRNA-21 in single cancer cells from normal cells. This approach was further extended to single-protein detection. The versatility of the strategy opens an exciting avenue for single-molecule detection of biomarkers of interest and thus holds great promise in a variety of biological and biomedical applications.
Asunto(s)
MicroARNs/análisis , Espectrometría Raman/métodos , Animales , Línea Celular Tumoral , ADN de Cadena Simple/química , Humanos , Nanopartículas del Metal/química , Ratones , MicroARNs/genética , Mutación , Células 3T3 NIH , Hibridación de Ácido Nucleico , Plata/químicaRESUMEN
Electromagnetic hot spots of surface-enhanced Raman scattering have been extensively employed for bioanalysis in solution or on a substrate, but building hot spots in living systems for probing targets of interest has not been achieved yet because of the complex and dynamic physiological environment. Herein, we show that a target-programmed nanoparticle dimerization can be combined with the background-free Raman reporters (alkyne, C≡C; nitrile, C≡N) for multiplexed imaging of microRNAs (miRNAs) in living cells. The in situ formation of plasmonic dimers results in an intense hot spot, thus dramatically enhancing the Raman signals of the reporters residing in the hot spot. More significantly, the reporters exhibit single nonoverlapping peaks in the cellular Raman-silent region (1800-2800 cm-1), thus eliminating spectral unmixing and background interference. A 3D Raman mapping technique was harnessed to monitor the spatial distribution of the dimers and thus the multiple miRNAs in cells. This approach could be extended to probe other biomarkers of interest for monitoring specific pathophysiological events at the live-cell level.
Asunto(s)
Fenómenos Electromagnéticos , Oro/química , Nanopartículas del Metal/química , Compuestos Organometálicos/química , Células Cultivadas , Dimerización , Células HEK293 , Células HeLa , Humanos , Células MCF-7 , MicroARNs/análisis , MicroARNs/genética , MicroARNs/aislamiento & purificación , Estructura Molecular , Compuestos Organometálicos/síntesis química , Tamaño de la Partícula , Espectrofotometría Ultravioleta , Espectrometría Raman , Propiedades de SuperficieRESUMEN
Controlling the electromagnetic hot-spot generation is essential for surface-enhanced Raman scattering (SERS) assays. Current hot-spot-based SERS assays have been extensively studied in solutions or on substrates. However, probing biospecies by controlling the hot-spot assembly in living systems has not been demonstrated thus far. Herein, we report a background-free SERS probe for imaging pyrophosphate (PPi), a biochemically significant anion, in living cells. Intracellular PPi is able to induce the nanoparticle dimerization, thus creating an intense electromagnetic hot spot and dramatically enhancing the signal of the Raman reporters residing in the hot spot. More impressively, the reporter we used in this study provides a strong and sharp single peak in the cellular Raman-silent region (1800-2800 cm-1), thus eliminating the possible background interference. This strategy could be readily extended to detect other biomarkers by only replacing the recognition ligands.
Asunto(s)
Difosfatos/análisis , Oro/química , Nanopartículas del Metal/química , Sondas Moleculares/química , Nitrilos/química , Biomarcadores/análisis , Células HeLa , Humanos , Conformación Molecular , Espectrometría Raman , Propiedades de Superficie , Células Tumorales CultivadasRESUMEN
We report a surprising discovery that Prussian blue (PB) can be employed as a highly sensitive and background-free resonant Raman reporter. Conventional Raman reporters show multiple spectral bands in the fingerprint region, which are generally overlapped with those from dominant endogenous biomolecules, and are thus difficult to be separated. Herein, we found that PB only possesses a strong and sharp single-band in the cellular Raman-silent region, where no Raman signals from biological species were observed. Therefore, the Raman spectra from PB and endogenous biomolecules are completely resolved without resorting to complicated spectral unmixing. Moreover, PB holds a strong UV-vis absorption band between 500 and 900 nm, which is resonant with the incident detection lasers, providing extremely high sensitivity. Through assembly of PB onto plasmonic cores, a new surface-enhanced resonance Raman scattering (SERRS) probe was achieved with a high signal-to-background ratio (SBR). We demonstrated the performance of the PB-based SERRS tags for high-sensitivity immunoassay and cancer cell imaging.
Asunto(s)
Ferrocianuros/química , Espectrometría Raman , Oro/química , Células HeLa , Células Hep G2 , Humanos , Inmunoensayo/métodos , Nanopartículas del Metal/química , Microscopía Confocal , Polilisina/químicaRESUMEN
We presented a Janus PEGylated AuNP probe where PEGs and recognition ligands (e.g., 4-aminobenzenethiol, 4-ABT) were asymmetrically functionalized on an AuNP. With this design, the probes showed high colloidal stability, signal robustness, specificity, and sufficient sensitivity in the determination of NO2- in various complex samples.
RESUMEN
In this communication, FeMnO3 particles were prepared and evaluated as an anode material for Li ion batteries. This electrode shows high capacity, excellent rate capability, and good cycling stability (984 mA h g-1 at 1.0 A g-1 after 500 cycles). Moreover, the Li storage mechanism is studied.
RESUMEN
A mini-hollow polyhedron Mn2O3is used as the anode material for lithium-ion batteries. Benefiting from the small interior cavity and intrinsic nanosize effect, a stable reconstructed hierarchical nanostructure is formed. It has excellent energy storage properties, exhibiting a capacity of 760 mAh g-1 at 2 A g-1 after 1000 cycles. This finding offers a new perspective for the design of electrodes with large energy storage.
RESUMEN
PURPOSE: Although desmocollins have an important position in cancer-related research, there are little reports about the relations between cancers and desmocollin 1 (DSC1). The present study was designed to investigate the correlations between DSC1 and head and neck squamous cell carcinoma (HNSCC). METHODS: First we analyzed the GEO database; then, HNSCC and pericarcinous tissues were collected to verify the results. DSC1 expression was detected by western blot and real-time PCR. The co-expression genes of DSC1 were extracted from Cancer Cell Line Encyclopedia database (CCLE database), and their correlation was analyzed in The Cancer Genome Atlas HNSCC database (TCGA HNSCC database). Next the gene ontology analysis (GO) was carried out. Moreover, we suppressed DSC1 in FaDu cell to investigate the internal mechanism. RESULTS: GEO database showed that DSC1 was higher in HNSCC and patients with higher DSC1 had unfavorable prognosis. The results of the samples showed that DSC1 was significantly higher in HNSCC than in normal tissue, which was consistent with the results of GEO database. The co-expression genes of DSC1 were extracted from CCLE database and verified in TCGA HNSCC database. It revealed that DSC1 was related to cell signal transduction. In FaDu/siDSC1 cells, the proliferation and migration were decreased compared to FaDu cells, and the expression levels of ß-catenin, c-myc and cyclin D1 down-regulated significantly. CONCLUSIONS: The increased expression of DSC1 can promote the occurrence of HNSCC and is associated with tumor. The increased expression of DSC1 also indicates a poor prognosis of the patients with HNSCC.
Asunto(s)
Carcinoma de Células Escamosas/genética , Carcinoma de Células Escamosas/patología , Diferenciación Celular/genética , Desmocolinas/genética , Neoplasias de Cabeza y Cuello/genética , Neoplasias de Cabeza y Cuello/patología , Adulto , Anciano , Anciano de 80 o más Años , Biomarcadores de Tumor/genética , Línea Celular Tumoral , Desmocolinas/metabolismo , Regulación hacia Abajo/genética , Femenino , Regulación Neoplásica de la Expresión Génica , Humanos , Masculino , Persona de Mediana Edad , Pronóstico , Carcinoma de Células Escamosas de Cabeza y CuelloRESUMEN
As the delegate of tunnel structure sodium titanates, Na2 Ti6 O13 nanorods with dominant large interlayer spacing exposed facet are prepared. The exposed large interlayers provide facile channels for Na(+) insertion and extraction when this material is used as anode for Na-ion batteries (NIBs). After an activation process, this NIB anode achieves a high specific capacity (a capacity of 172 mAh g(-1) at 0.1 A g(-1) ) and outstanding cycling stability (a capacity of 109 mAh g(-1) after 2800 cycles at 1 A g(-1) ), showing its promising application on large-scale energy storage systems. Furthermore, the electrochemical and structural characterization reveals that the expanded interlayer spacings should be in charge of the activation process, including the enhanced kinetics, the lowered apparent activation energy, and the increased capacity.