RESUMEN
The photoconversion of CO2 into valuable chemical products using solar energy is a promising strategy to address both energy and environmental challenges. However, the strongly adsorbed CO2 frequently impedes the seamless advancement of the subsequent reaction by significantly increasing the reaction activation energy. Here, we present a BiFeO3 material with lattice strain that collaboratively regulates the d/p-2π* orbitals hybridization between metal sites and *CO2 as well as *COOH intermediates to achieve rapid conversion of solidly adsorbed CO2 to critical *COOH intermediates, accelerating the overall CO2 reduction kinetics. Quasi in-situ X-ray photoelectron spectroscopy and in-situ Fourier Transform infrared spectroscopy combined with theoretical calculation reveals that the optimized Fe sites enhance the adsorption and activation effect of CO2, and continuous internal electrons are rapidly transferred to the reaction sites and injected into the surface *CO2 and *COOH under the condition of illumination, which promotes the rapid formation and stability of *COOH. Certainly, the performance of CO2 photoreduction to CO is improved by 12.81-fold compared with the base material. This work offers a new perspective for the rapid photoreduction process of strongly adsorbed CO2.
RESUMEN
A convenient and efficient synthesis of structurally diverse indazolo[1,2-a]indazolones via a Rh(III)-catalyzed [4 + 1] annulation of 1-arylindazolones with alkynyl cyclobutanols has been achieved by combining C-H and C-C bond cleavage. This cascade reaction features readily available starting materials, good functional group tolerance, broad substrate scope, and excellent atom-economy.
RESUMEN
Given the escalating demand for wearable electronics, there is an urgent need to explore cost-effective and environmentally friendly flexible energy storage devices with exceptional electrochemical properties. However, the existing types of flexible energy storage devices encounter challenges in effectively integrating mechanical and electrochemical performances. This review is intended to provide strategies for the design of components in flexible energy storage devices (electrode materials, gel electrolytes, and separators) with the aim of developing energy storage systems with excellent performance and deformability. Firstly, a concise overview is provided on the structural characteristics and properties of carbon-based materials and conductive polymer materials utilized in flexible energy storage devices. Secondly, the fabrication process and strategies for optimizing their structures are summarized. Subsequently, a comprehensive review is presented regarding the applications of carbon-based materials and conductive polymer materials in various fields of flexible energy storage, such as supercapacitors, lithium-ion batteries, and zinc-ion batteries. Finally, the challenges and future directions for next-generation flexible energy storage systems are proposed.
RESUMEN
Hydrogen electrode reactions, including hydrogen evolution reactions and hydrogen oxidation reactions, are fundamental and crucial within aqueous electrochemistry. Particularly in energy-related electrocatalysis processes, there is a consistent involvement of hydrogen-related electrochemical processes, underscoring the need for in-depth study. This review encompasses significant reports, delving into elementary steps and reaction mechanisms of hydrogen electrode reactions, as well as catalyst design strategies. In addition, we focus on the application of hydrogen electrode reaction mechanism in different energy-related electrocatalytic reactions, and the significance of the promotion and suppression of reaction kinetics in different reaction systems. It thoroughly elucidated the significance of these reactions and the need for a deeper understanding, offering a novel perspective for the future development of this field.
RESUMEN
Selective photocatalytic reduction of CO2 to value-added fuels, such as CH4, is highly desirable due to its high mass-energy density. Nevertheless, achieving selective CH4 with higher production yield on p-block materials is hindered by non-ideal adsorption of *CHO key intermediate and an unclear structure-function relationship. Herein, we unlock the key reaction steps of CO2 and found a volcano-type structure-function relationship for photocatalytic CO2-to-CH4 conversion by gradual reduction of the p-band center of the p-block Bi element leading to formation of Bi-oxygen vacancy heterosites. The selectivity of CH4 is also positive correlation with adsorption energy of *CHO. The Bi-oxygen vacancy heterosites with an appropriate filled Bi-6p orbital electrons and p band center (-0.64) enhance the coupling between C-2p of *CHO and Bi-6p orbitals, thereby resulting in high selectivity (95.2 %) and productivity (17.4â µmol g-1 h-1) towards CH4. Further studies indicate that the synergistic effect between Bi-oxygen vacancy heterosites reduces Gibbs free energy for *CO-*CHO process, activates the C-H and C=O bonds of *CHO, and facilitates the enrichment of photoexcited electrons at active sites for multielectron photocatalytic CO2-to-CH4 conversion. This work provides a new perspective on developing p-block elements for selective photocatalytic CO2 conversion.
RESUMEN
Traditional H2O2 cleavage mediated by macroscopic electron transfer (MET) not only has low utilization of H2O2, but also sacrifices the stability of catalysts. We present a non-redox hydroxyl-enriched spinel (CuFe2O4) catalyst with dual Lewis acid sites to realize the homolytic cleavage of H2O2. The results of systematic experiments, in situ characterizations, and theoretical calculations confirm that tetrahedral Cu sites with optimal Lewis acidity and strong electron delocalization can synergistically elongate the O-O bonds (1.47â Å â 1.87â Å) in collaboration with adjacent bridging hydroxyl (another Lewis acid site). As a result, the free energy of H2O2 homolytic cleavage is decreased (1.28â eV â 0.98â eV). H2O2 can be efficiently split into â OH induced by hydroxyl-enriched CuFe2O4 without MET, which greatly improves the catalyst stability and the H2O2 utilization (65.2 %, nearly 2 times than traditional catalysts). The system assembled with hydroxyl-enriched CuFe2O4 and H2O2 affords exceptional performance for organic pollutant elimination. The scale-up experiment using a continuous flow reactor realizes long-term stability (up to 600â mL), confirming the tremendous potential of hydroxyl-enriched CuFe2O4 for practical applications.
RESUMEN
Atomically dispersed catalysts are a promising alternative to platinum group metal catalysts for catalyzing the oxygen reduction reaction (ORR), while limited durability during the electrocatalytic process severely restricts their practical application. Here, we report an atomically dispersed Co-doped carbon-nitrogen bilayer catalyst with unique dual-axial Co-C bonds (denoted as Co/DACN) by a smart phenyl-carbon-induced strategy, realizing highly efficient electrocatalytic ORR in both alkaline and acidic media. The corresponding half-wave potential for ORR is up to 0.85 and 0.77 V (vs. reversible hydrogen electrode (RHE)) in 0.5 M H2SO4 and 0.1 M KOH, respectively, representing the best ORR activity among all non-noble metal catalysts reported to date. Impressively, the Zn-air battery (ZAB) equipped with Co/DACN cathode achieves outstanding durability after 1,688 h operation at 10 mA cm-2 with a high current density (154.2 mA cm-2) and a peak power density (210.1 mW cm-2). Density functional theory calculations reveal that the unique dual-axial cross-linking Co-C bonds of Co/DACN significantly enhance the stability during ORR and also facilitate the 4e- ORR pathway by forming a joint electron pool due to the improved interlayer electron mobility. We believe that axial engineering opens a broad avenue to develop high-performance heterogeneous electrocatalysts for advanced energy conversion and storage.
RESUMEN
To cope with the urgent environmental pressure and tight energy demand, using electrocatalytic methods to drive the reduction of carbon dioxide molecules and produce a variety of fuels and chemicals, is one of the effective pathways to achieve carbon neutrality. In recent years, many significant advances in the study of the electrochemical carbon dioxide reduction reaction (CO2RR) have been made, but most of the works exhibit low current density, small electrode area and poor long-term stability, which are not suitable for large-scale industrial applications. Herein, combining the research achievements obtained in laboratories and the practical demand of industrial production, we summarize recent frontier progress in the field of the electrochemical CO2RR, including the fundamentals of catalytic reactions, catalyst design and preparation, and the construction of electrolyzers. In addition, we discuss the bottleneck problem of industrial CO2 electrolysis, and further present the prospect of the essential issues to be solved by the available technology for industrial electrolysis. This review can provide some basic understanding and knowledge accumulation for the development and practical application of electrochemical CO2RR technology.
RESUMEN
Metal halide perovskites offer ample opportunities to develop advanced optoelectronic devices. This work showcases that the integration of metal halide perovskites into metal oxide nanoshells with controllable interior cavities can enable water-vapor-responsive dual-mode switching of fluorescence and structural color. Through a ship-in-a-bottle method to introduce a controlled amount of CsPbBr3 into MnO2 nanoshells, we have designed CsPbBr3@MnO2 yolk-shell nanostructures, which can uptake a defined amount of water to exhibit rapid (less than 1 s) and reversible (≥100 cycles) responses in both fluorescence on-off and color change when exposed to dynamic water vapor. These responses originate from the water-triggered phase transformation of CsPbBr3 to CsPb2Br5 and the structural color change of the MnO2 shell. The altered electronic and bonding structure at the oxide-halide interface, rapid water accumulation in the yolk-shell cavity, and protective effect of the oxide shell facilitate the reversible transformations. The response characteristics of the yolk-shell nanostructures have been further demonstrated in fabricating patterned films capable of multiple fluorescence/structural color responses, highlighting their potential for applications in advanced anticounterfeiting and encryption.
RESUMEN
Revealing the in-depth structure-property relationship and designing specific capacity electrodes are particularly important for supercapacitors. Despite many efforts made to tune the composition and electronic structure of cobalt oxide for pseudocapacitance, insight into the [CoO]6 octahedron from the microstructure is still insufficient. Herein, we present a tunable [CoO]6 octahedron microstructure in LiCoO2 by a chemical delithiation process. The c-strained strain of the [CoO]6 octahedron is induced to form higher valence Co ions, and the (003) crystalline layer spacing increases to allow more rapid participation of OH- in the redox reaction. Interestingly, the specific capacity of L0.75CO2 is nearly four times higher than that of LiCoO2 at 10 mA g-1. The enhanced activity originated from the asymmetric strain [CoO]6 octahedra, resulting in enhanced electronic conductivity and Co-O hybridization for accelerated redox kinetics. This finding provides new insights into the modification strategy for pseudocapacitive transition metal oxides.
RESUMEN
Electrocatalytic CO2 -to-syngas (gaseous mixture of CO and H2 ) is a promising way to curb excessive CO2 emission and the greenhouse gas effect. Herein, we present a bimetallic AuZn@ZnO (AuZn/ZnO) catalyst with high efficiency and durability for the electrocatalytic reduction of CO2 and H2 O, which enables a high Faradaic efficiency of 66.4 % for CO and 26.5 % for H2 and 3â h stability of CO2 -to-syngas at -0.9â V vs. the reversible hydrogen electrode (RHE). The CO/H2 ratios show a wide range from 0.25 to 2.50 over a narrow potential window (-0.7â V to -1.1â V vs. RHE). In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy combined with density functional theory calculations reveals that the bimetallic synergistic effect between Au and Zn sites lowers the activation energy barrier of CO2 molecules and facilitates electronic transfer, further highlighting the potential to control CO/H2 ratios for efficient syngas production using the coexisting Au sites and Zn sites.
RESUMEN
The sluggish four-electron oxygen evolving reaction is one of the key limitations of photoelectrochemical water decomposition. Optimizing the binding of active sites to oxygen in water and promoting the conversion of *O to *OOH are the key to enhancing oxygen evolution reaction. In this work, W-doped Cu2 V2 O7 (CVO) constructs corner-sharing tetrahedrally coordinated W-V dual active sites to induce the generation of electron deficiency active centers, promote the adsorption of âOH, and accelerate the transformation of *O to *OOH for water splitting. The photocurrent obtained by the W-modified CVO photoanode is 0.97 mA cm-2 at 1.23 V versus RHE, which is much superior to that of the reported CVO. Experimental and theoretical results show that the excellent catalytic performance may be attributed to the formation of synergistic dual active sites between W and V atoms, and the introduction of W ions reduces the charge migration distance and prolongs the lifetime of photogenerated carriers. Meanwhile, the electronic structure in the center of the d-band is modulated, which leads to the redistribution of the electron density in CVO and lowers the energy barrier for the conversion of the rate-limiting step *O to *OOH.
RESUMEN
Breaking the trade-off between activity and selectivity has perennially been a formidable endeavor in the field of hydrogen peroxide (H2 O2 ) photosynthesis, especially the side-on configuration of oxygen (O2 ) on the catalyst surface will cause the cleavage of O-O bonds, which drastically hinders the H2 O2 production performance. Herein, we present an atomically heteroatom P doped ZnIn2 S4 catalyst with tunable oxygen adsorption configuration to accelerate the ORR kinetics essential for solar-driven H2 O2 production. Indeed, the spectroscopy characterizations (such as EXAFS and in situ FTIR) and DFT calculations reveal that heteroatom P doped ZnIn2 S4 at substitutional and interstitial sites, which not only optimizes the coordination environment of Zn active sites, but also facilitates electron transfer to the Zn sites and improves charge density, avoiding the breakage of O-O bonds and reducing the energy barriers to H2 O2 production. As a result, the oxygen adsorption configuration is regulated from side-on (Yeager-type) to end-on (Pauling-type), resulting in the accelerated ORR kinetics from 874.94 to 2107.66â µmol g-1 h-1 . This finding offers a new avenue toward strategic tailoring oxygen adsorption configuration by the rational design of doped photocatalyst.
RESUMEN
Zn-based catalysts hold great potential to replace the noble metal-based ones for CO2 reduction reaction (CO2 RR). Undercoordinated Zn (Znδ+ ) sites may serve as the active sites for enhanced CO production by optimizing the binding energy of *COOH intermediates. However, there is relatively less exploration into the dynamic evolution and stability of Znδ+ sites during CO2 reduction process. Herein, we present ZnO, Znδ+ /ZnO and Zn as catalysts by varying the applied reduction potential. Theoretical studies reveal that Znδ+ sites could suppress HER and HCOOH production to induce CO generation. And Znδ+ /ZnO presents the highest CO selectivity (FECO 70.9 % at -1.48â V vs. RHE) compared to Zn and ZnO. Furthermore, we propose a CeO2 nanotube with confinement effect and Ce3+ /Ce4+ redox to stabilize Znδ+ species. The hollow core-shell structure of the Znδ+ /ZnO/CeO2 catalyst enables to extremely expose electrochemically active area while maintaining the Znδ+ sites with long-time stability. Certainly, the target catalyst affords a FECO of 76.9 % at -1.08â V vs. RHE and no significant decay of CO selectivity in excess of 18â h.
RESUMEN
Conducting polymers with high theoretical capacitance and deformability are among the optimal candidates for compressible supercapacitor electrode materials. However, achieving both mechanical and electrochemical stabilities in a single electrode remains a great challenge. To address this issue, the "Polymer Chainmail" is proposed with reversible deformation capability and enhances stability because of the steric hindrance and charge compensation effect of doped anions. As a proof of concept, four common anions are selected as dopants for Poly(3,4-ethylenedioxythiophene) (PEDOT), and their effects on the adsorption and diffusion of H+ on PEDOT are verified using density functional theory calculations. Owing to the film formation effect, the PF 6 - ${{\rm{PF}}_6^- }$ doped PEDOT/nitrogen-doped carbon foam exhibits good mechanical properties. Furthermore, the composite demonstrates excellent rate performance and stability due to suitable anion doping. This finding provides new insights into the preparation of electrochemically stable conductive polymer-based compressible electrode materials.
RESUMEN
Electrochemically converting NO3- compounds into ammonia represents a sustainable route to remove industrial pollutants in wastewater and produce valuable chemicals. Bimetallic nanomaterials usually exhibit better catalytic performance than the monometallic counterparts, yet unveiling the reaction mechanism is extremely challenging. Herein, we report an atomically precise [Ag30Pd4 (C6H9)26](BPh4)2 (Ag30Pd4) nanocluster as a model catalyst toward the electrochemical NO3- reduction reaction (eNO3-RR) to elucidate the different role of the Ag and Pd site and unveil the comprehensive catalytic mechanism. Ag30Pd4 is the homoleptic alkynyl-protected superatom with 2 free electrons, and it has a Ag30Pd4 metal core where 4 Pd atoms are located at the subcenter of the metal core. Furthermore, Ag30Pd4 exhibits excellent performance toward eNO3-RR and robust stability for prolonged operation, and it can achieve the highest Faradaic efficiency of NH3 over 90%. In situ Fourier-transform infrared study revealed that a Ag site plays a more critical role in converting NO3- into NO2-, while the Pd site makes a major contribution to catalyze NO2- into NH3. The bimetallic nanocluster adopts a tandem catalytic mechanism rather than a synergistic catalytic effect in eNO3-RR. Such finding was further confirmed by density functional theory calculations, as they disclosed that Ag is the most preferable binding site for NO3-, which then binds a water molecule to release NO2-. Subsequently, NO2- can transfer to the vicinal exposed Pd site to promote NH3 formation.
RESUMEN
The electronic structure of transition metal complexes can be modulated by replacing partial ion of complexes to obtain tuned intrinsic oxygen reduction reaction (ORR) or oxygen evolution reaction (OER) electrocatalytic activity. However, the anion-modulated transition metal complexes ORR activity of is still unsatisfactory, and the construction of hetero-anionic structure remains challenging. Herein, an atomic doping strategy is presented to prepare the CuCo2 O4-x Sx /NC-2 (CCSO/NC-2) as electrocatalysts, the structrual characterization results favorably demonstrate the partial substitution of S atoms for O in CCSO/NC-2, which shows excellent catalytic performance and durability for OER and ORR in 0.1 m KOH. In addition, the catalyst assembled Zinc-air battery with an open circuit potential of 1.43 V maintains performance after 300 h of cyclic stability. Theoretical calculations and differential charges illustrate that S doping optimizes the reaction kinetics and promotes electron redistribution. The superior performance of CCSO/NC-2 catalysis is mainly due to its unique S modulation of the electronic structure of the main body. The introduction of S promotes CoO covalency and constructs a fast electron transport channel, thus optimizing the adsorption degree of active site Co to the reaction intermediates.
RESUMEN
As a result of their optical and redox properties, bipyridyl (bpy) and terpyridyl (tpy) ruthenium complexes play vital roles in numerous domains. Herein, the design and synthesis of two bipyridyl and terpyridyl ruthenium(II) building units L1 and L2 are explained. A [Ru(bpy)3]2+ functionalized triangle S1 and a Sierpinski triangle S2 were synthesized in almost quantitative yields by the self-assembly of L1 with Zn2+ ions and by the heteroleptic self-assembly of L1 and L2 with Zn2+ ions, respectively. The Sierpinski triangle S2 contains the coordination metals [Ru(bpy)3]2+, [Ru(tpy)2]2+, and [Zn(tpy)2]2+. According to research on the catalytic activity of amine oxidation on supramolecules S1 and S2, the benzylamine substrates were nearly entirely transformed to N-benzylidenebenzylamine derivatives after 1 h under a Xe lamp. Furthermore, the observed ruthenium-containing terpyridyl supramolecule S2 maintains high luminous performance at ambient temperature. This discovery opens up new possibilities for the rational molecular design of terpyridyl ruthenium fluorescent materials and catalytic functional materials.
RESUMEN
The chlor-alkali process plays an essential and irreplaceable role in the modern chemical industry due to the wide-ranging applications of chlorine gas. However, the large overpotential and low selectivity of current chlorine evolution reaction (CER) electrocatalysts result in significant energy consumption during chlorine production. Herein, we report a highly active oxygen-coordinated ruthenium single-atom catalyst for the electrosynthesis of chlorine in seawater-like solutions. As a result, the as-prepared single-atom catalyst with Ru-O4 moiety (Ru-O4 SAM) exhibits an overpotential of only ~30 mV to achieve a current density of 10 mA cm-2 in an acidic medium (pH = 1) containing 1 M NaCl. Impressively, the flow cell equipped with Ru-O4 SAM electrode displays excellent stability and Cl2 selectivity over 1000 h continuous electrocatalysis at a high current density of 1000 mA cm-2. Operando characterizations and computational analysis reveal that compared with the benchmark RuO2 electrode, chloride ions preferentially adsorb directly onto the surface of Ru atoms on Ru-O4 SAM, thereby leading to a reduction in Gibbs free-energy barrier and an improvement in Cl2 selectivity during CER. This finding not only offers fundamental insights into the mechanisms of electrocatalysis but also provides a promising avenue for the electrochemical synthesis of chlorine from seawater electrocatalysis.
RESUMEN
The development of productive catalysts for the oxygen evolution reaction (OER) remains a major challenge requiring significant progress in both mechanism and material design. Conventionally, the thermodynamic barrier of lattice oxidation mechanism (LOM) is lower than that of absorbate evolution mechanism (AEM) because the former can overcome certain limitations. However, controlling the OER pathway from the AEM to the LOM by exploiting the intrinsic properties of the catalyst remains challenging. Herein, we incorporated F anions into the oxygen vacancies of spinel ZnCo2 O4 and established a link between the electronic structure and the OER catalytic mechanism. Theoretical density calculations revealed that F upshifts the O 2p center and activates the redox capability of lattice O, successfully triggering the LOM pathway. Moreover, the high electronegativity of F anions is favourable for balancing the residual protonation, which can stabilize the structure of the catalyst.