Mimicking kidney flow shear efficiently induces aggregation of LECT2, a protein involved in renal amyloidosis.

Aggregation of leukocyte cell-derived chemotaxin 2 (LECT2) causes ALECT2, a systemic amyloidosis that affects the kidney and liver. Previous studies established that LECT2 fibrillogenesis is accelerated by the loss of its bound zinc ion and stirring/shaking. These forms of agitation create heterogeneous shear conditions, including air-liquid interfaces that denature proteins, that are not present in the body. Here, we determined the extent to which a more physiological form of mechanical stress-shear generated by fluid flow through a network of narrow channels-drives LECT2 fibrillogenesis. To mimic blood flow through the kidney, where LECT2 and other proteins form amyloid deposits, we developed a microfluidic device consisting of progressively branched channels narrowing from 5 mm to 20 µm in width. Shear was particularly pronounced at the branch points and in the smallest capillaries. Aggregation was induced within 24 h by shear levels that were in the physiological range and well below those required to unfold globular proteins such as LECT2. EM images suggested the resulting fibril ultrastructures were different when generated by laminar flow shear versus shaking/stirring. Importantly, results from the microfluidic device showed the first evidence that the I40V mutation accelerated fibril formation and increased both the size and the density of the aggregates. These findings suggest that kidney-like flow shear, in combination with zinc loss, acts in combination with the I40V mutation to trigger LECT2 amyloidogenesis. These microfluidic devices may be of general use for uncovering mechanisms by which blood flow induces misfolding and amyloidosis of circulating proteins.

Adaptable, turn-on maturation (ATOM) fluorescent biosensors for multiplexed detection in cells.

A grand challenge in biosensor design is to develop a single-molecule, fluorescent protein-based platform that can be easily adapted to recognize targets of choice. Here, we created a family of adaptable, turn-on maturation (ATOM) biosensors consisting of a monobody (circularly permuted at one of two positions) or a nanobody (circularly permuted at one of three positions) inserted into a fluorescent protein at one of three surface loops. Multiplexed imaging of live human cells coexpressing cyan, yellow and red ATOM sensors detected biosensor targets that were specifically localized to various subcellular compartments. Fluorescence activation involved ligand-dependent chromophore maturation with turn-on ratios of up to 62-fold in cells and 100-fold in vitro. Endoplasmic reticulum- and mitochondria-localized ATOM sensors detected ligands that were targeted to those organelles. The ATOM design was validated with three monobodies and one nanobody inserted into distinct fluorescent proteins, suggesting that customized ATOM sensors can be generated quickly.

Mimicking Kidney Flow Shear Efficiently Induces Aggregation of LECT2, a Protein Involved in Renal Amyloidosis.

Aggregation of leukocyte cell-derived chemotaxin 2 (LECT2) causes ALECT2, a systemic amyloidosis that affects the kidney and liver. Homozygosity of the I40V LECT2 mutation is believed to be necessary but not sufficient for the disease. Previous studies established that LECT2 fibrillogenesis is greatly accelerated by loss of its single bound zinc ion and stirring or shaking. These forms of agitation are often used to facilitate protein aggregation, but they create heterogeneous shear conditions, including air-liquid interfaces that denature proteins, that are not present in the body. Here, we determined the extent to which a more physiological form of mechanical stress-shear generated by fluid flow through a network of artery and capillary-sized channels-drives LECT2 fibrillogenesis. To mimic blood flow through the human kidney, where LECT2 and other proteins form amyloid deposits, we developed a microfluidic device consisting of progressively branched channels narrowing from 5 mm to 20 µm in width. Flow shear was particularly pronounced at the branch points and in the smallest capillaries, and this induced LECT2 aggregation much more efficiently than conventional shaking methods. EM images suggested the resulting fibril structures were different in the two conditions. Importantly, results from the microfluidic device showed the first evidence that the I40V mutation accelerated fibril formation and increased both size and density of the aggregates. These findings suggest that kidney-like flow shear, in combination with zinc loss, acts in combination with the I40V mutation to trigger LECT2 amyloidogenesis. These microfluidic devices may be of general use for uncovering the mechanisms by which blood flow induces misfolding and amyloidosis of circulating proteins.

Adaptable, Turn-On Monobody (ATOM) Fluorescent Biosensors for Multiplexed Detection in Cells.

A grand challenge in biosensor design is to develop a single molecule, fluorescent protein-based platform that can be easily adapted to recognize targets of choice. Conceptually, this can be achieved by fusing a small, antibody-like binding domain to a fluorescent protein in such a way that target binding activates fluorescence. Although this design is simple to envision, its execution is not obvious. Here, we created a family of adaptable, turn-on monobody (ATOM) biosensors consisting of a monobody, circularly permuted at one of two positions, inserted into a fluorescent protein at one of three surface loops. Multiplexed imaging of live human cells co-expressing cyan, yellow, and red ATOM sensors detected the biosensor targets (WDR5, SH2, and hRAS proteins) that were localized to the nucleus, cytoplasm, and plasma membrane, respectively, with high specificity. ER- and mitochondria-localized ATOM sensors also detected ligands that were targeted to those organelles. Fluorescence activation involved ligand-dependent chromophore maturation with fluorescence turn-on ratios of >20-fold in cells and up to 100-fold in vitro . The sensing mechanism was validated with three arbitrarily chosen monobodies inserted into jellyfish as well as anemone lineages of fluorescent proteins, suggesting that ATOM sensors with different binding specificities and additional colors can be generated relatively quickly.

A generalizable nanopore sensor for highly specific protein detection at single-molecule precision.

Protein detection has wide-ranging implications in molecular diagnostics. Substantial progress has been made in protein analytics using nanopores and the resistive-pulse technique. Yet, a long-standing challenge is implementing specific interfaces for detecting proteins without the steric hindrance of the pore interior. Here, we formulate a class of sensing elements made of a programmable antibody-mimetic binder fused to a monomeric protein nanopore. This way, such a modular design significantly expands the utility of nanopore sensors to numerous proteins while preserving their architecture, specificity, and sensitivity. We prove the power of this approach by developing and validating nanopore sensors for protein analytes that drastically vary in size, charge, and structural complexity. These analytes produce unique electrical signatures that depend on their identity and quantity and the binder-analyte assembly at the nanopore tip. The outcomes of this work could impact biomedical diagnostics by providing a fundamental basis for biomarker detection in biofluids.

Enhancing response of a protein conformational switch by using two disordered ligand binding domains.

Introduction: Protein conformational switches are often constructed by fusing an input domain, which recognizes a target ligand, to an output domain that establishes a biological response. Prior designs have employed binding-induced folding of the input domain to drive a conformational change in the output domain. Adding a second input domain can in principle harvest additional binding energy for performing useful work. It is not obvious, however, how to fuse two binding domains to a single output domain such that folding of both binding domains combine to effect conformational change in the output domain. Methods: Here, we converted the ribonuclease barnase (Bn) to a switchable enzyme by duplicating a C-terminal portion of its sequence and appending it to its N-terminus, thereby establishing a native fold (OFF state) and a circularly permuted fold (ON state) that competed for the shared core in a mutually exclusive fashion. Two copies of FK506 binding protein (FKBP), both made unstable by the V24A mutation and one that had been circularly permuted, were inserted into the engineered barnase at the junctions between the shared and duplicated sequences. Results: Rapamycin-induced folding of FK506 binding protein stretched and unfolded the native fold of barnase via the mutually exclusive folding effect, and rapamycin-induced folding of permuted FK506 binding protein stabilized the permuted fold of barnase by the loop-closure entropy principle. These folding events complemented each other to turn on RNase function. The cytotoxic switching mechanism was validated in yeast and human cells, and in vitro with purified protein. Discussion: Thermodynamic modeling and experimental results revealed that the dual action of loop-closure entropy and mutually exclusive folding is analogous to an engine transmission in which loop-closure entropy acts as the low gear, providing efficient switching at low ligand concentrations, and mutually exclusive folding acts as the high gear to allow the switch to reach its maximum response at high ligand concentrations.

Engineering protein and DNA tools for creating DNA-dependent protein switches.

Switchable proteins are capable of changing conformations from inactive (OFF) to active (ON) forms in response to inputs such as ligand binding, pH or temperature change, or light absorption. A particularly powerful class of protein switches, exemplified by the Cas nucleases of CRISPR systems, are activated by binding of specific DNA or RNA sequences. The mechanism by which oligonucleotide binding regulates biological activity is complex and highly specialized in the case of Cas enzymes, but recent advancements in protein and DNA engineering have made it possible to introduce this mode of control into other enzymes. This chapter highlights recent examples of protein switches that combine these two fields of engineering for the purpose of creating biosensors that detect pathogen and other genomic sequences. One protein engineering method-alternate frame folding-has the potential to convert many proteins into ligand-activated switches by inserting a binding protein (input domain) into an enzyme (output domain). The steps for doing so are illustrated using GCN4 as a DNA recognition domain and nanoluciferase as a luminescent reporter that changes color as a result of DNA binding. DNA engineering protocols are included for creating DNA tools (de novo designed hairpins and modified aptamers), that enable the biosensor to be activated by arbitrary DNA/RNA sequences and small molecules/proteins, respectively. These methodologies can be applied to other proteins to gain control of their functions by DNA binding.

Mechanistic insights into enhancement or inhibition of phase separation by different polyubiquitin chains.

Ubiquitin-binding shuttle UBQLN2 mediates crosstalk between proteasomal degradation and autophagy, likely via interactions with K48- and K63-linked polyubiquitin chains, respectively. UBQLN2 comprises self-associating regions that drive its homotypic liquid-liquid phase separation (LLPS). Specific interactions between one of these regions and ubiquitin inhibit UBQLN2 LLPS. Here, we show that, unlike ubiquitin, the effects of multivalent polyubiquitin chains on UBQLN2 LLPS are highly dependent on chain types. Specifically, K11-Ub4 and K48-Ub4 chains generally inhibit UBQLN2 LLPS, whereas K63-Ub4, M1-Ub4 chains, and a designed tetrameric ubiquitin construct significantly enhance LLPS. We demonstrate that these opposing effects stem from differences in chain conformations but not in affinities between chains and UBQLN2. Chains with extended conformations and increased accessibility to the ubiquitin-binding surface promote UBQLN2 LLPS by enabling a switch between homotypic to partially heterotypic LLPS that is driven by both UBQLN2 self-interactions and interactions between multiple UBQLN2 units with each polyubiquitin chain. Our study provides mechanistic insights into how the structural and conformational properties of polyubiquitin chains contribute to heterotypic LLPS with ubiquitin-binding shuttles and adaptors.

p53 and Zinc: A Malleable Relationship.

A large percentage of transcription factors require zinc to bind DNA. In this review, we discuss what makes p53 unique among zinc-dependent transcription factors. The conformation of p53 is unusually malleable: p53 binds zinc extremely tightly when folded, but is intrinsically unstable in the absence of zinc at 37°C. Whether the wild-type protein folds in the cell is largely determined by the concentration of available zinc. Consequently, zinc dysregulation in the cell as well as a large percentage of tumorigenic p53 mutations can cause p53 to lose zinc, misfold, and forfeit its tumor suppressing activity. We highlight p53's noteworthy biophysical properties that give rise to its malleability and how proper zinc binding can be restored by synthetic metallochaperones to reactivate mutant p53. The activity and mechanism of metallochaperones are compared to those of other mutant p53-targeted drugs with an emphasis on those that have reached the clinical trial stage.

Engineering protein activity into off-the-shelf DNA devices.

DNA-based devices are straightforward to design by virtue of their predictable folding, but they lack complex biological activity such as catalysis. Conversely, protein-based devices offer a myriad of functions but are much more difficult to design due to their complex folding. This study combines DNA and protein engineering to generate an enzyme that is activated by a DNA sequence of choice. A single protein switch, engineered from nanoluciferase using the alternate-frame-folding mechanism and herein called nLuc-AFF, is paired with different DNA technologies to create a biosensor for specific nucleic acid sequences, sensors for serotonin and ATP, and a two-input logic gate. nLuc-AFF is a genetically encoded, ratiometric, blue/green-luminescent biosensor whose output can be quantified by a phone camera. nLuc-AFF retains ratiometric readout in 100% serum, making it suitable for analyzing crude samples in low-resource settings. This approach can be applied to other proteins and enzymes to convert them into DNA-activated switches.

Intrinsically Disordered N-terminal Domain (NTD) of p53 Interacts with Mitochondrial PTP Regulator Cyclophilin D.

Mitochondrial permeability transition pore (mPTP) plays crucial roles in cell death in a variety of diseases, including ischemia/reperfusion injury in heart attack and stroke, neurodegenerative conditions, and cancer. To date, cyclophilin D is the only confirmed component of mPTP. Under stress, p53 can translocate into mitochondria and interact with CypD, triggering necrosis and cell growth arrest. However, the molecular details of p53/CypD interaction are still poorly understood. Previously, several studies reported that p53 interacts with CypD through its DNA-binding domain (DBD). However, using surface plasmon resonance (SPR), we found that both NTD-DBD, NTD and NTD (1-70) bind to CypD at ∼µM KD. In solution NMR, NTD binds CypD with µM affinity and mimics the pattern of FLp53 binding in chemical shift perturbation. In contrast, neither solution NMR nor fluorescence anisotropy detected DBD binding to CypD. Thus, instead of DBD, NTD is the major CypD binding site on p53. NMR titration and MD simulation revealed that NTD binds CypD with broad and dynamic interfaces dominated by electrostatic interactions. NTD 20-70 was further identified as the minimal binding region for CypD interaction, and two NTD fragments, D1 (residues 22-44) and D2 (58-70), can each bind CypD with mM affinity. Our detailed biophysical characterization of the dynamic interface between NTD and CypD provides novel insights on the p53-dependent mPTP opening and drug discovery targeting NTD/CypD interface in diseases.

Engineering a Fluorescent Protein Color Switch Using Entropy-Driven ß-Strand Exchange.

Protein conformational switches are widely used in biosensing. They are often composed of an input domain (which binds a target ligand) fused to an output domain (which generates an optical readout). A central challenge in designing such switches is to develop mechanisms for coupling the input and output signals via conformational changes. Here, we create a biosensor in which binding-induced folding of the input domain drives a conformational shift in the output domain that results in a sixfold green-to-yellow ratiometric fluorescence change in vitro and a 35-fold intensiometric fluorescence increase in cultured cells. The input domain consists of circularly permuted FK506 binding protein (cpFKBP) that folds upon binding its target ligand (FK506 or rapamycin). cpFKBP folding induces the output domain, an engineered green fluorescent protein (GFP) variant, to replace one of its ß-strands (containing T203 and specifying green fluorescence) with a duplicate ß-strand (containing Y203 and specifying yellow fluorescence) in an intramolecular exchange reaction. This mechanism employs the loop-closure entropy principle, embodied by the folding of the partially disordered cpFKBP domain, to couple ligand binding to the GFP color shift. This study highlights the high-energy barriers present in GFP folding which cause ß-strand exchange to be slow and are also likely responsible for the shift from the ß-strand exchange mechanism in vitro to ligand-induced chromophore maturation in cells. The proof-of-concept design has the advantages of full genetic encodability and potential for modularity. The latter attribute is enabled by the natural coupling of binding and folding and circular permutation of the input domain, which theoretically allows different binding domains to be compatible for insertion into the GFP surface loop.

Urea Denaturation, Zinc Binding, and DNA Binding Assays of Mutant p53 DNA-binding Domains and Full-length Proteins.

In the cell, the thermodynamic stability of a protein - and hence its biological activity - can change dramatically as a result of perturbations in its amino acid sequence and the concentration of stabilizing ligands. This interplay is particularly evident in zinc-binding transcription factors such as the p53 tumor suppressor, whose DNA-binding activity can critically depend on levels of intracellular zinc as well as point mutations that alter either metal binding or folding stability. Separate protocols exist for determining a protein's metal affinity and its folding free energy. These properties, however, are intimately connected, and a technique is needed to integrate these measurements. Our protocols employ common non-fluorescent and fluorescent zinc chelators to control and report on free Zn2+ concentration, respectively, combined with biophysical assays of full-length human p53 and its DNA-binding domain. Fitting the data to equations that contain stability and metal-binding terms results in a more complete picture of how metal-dependent proteins can lose and gain DNA-binding function in a range of physiological conditions. Graphic abstract: Figure 1.Raising intracellular zinc can restore tumor-suppressing function to p53 that has been unfolded by missense mutation or cellular conditions.

The tumor suppressor folliculin inhibits lactate dehydrogenase A and regulates the Warburg effect.

Aerobic glycolysis in cancer cells, also known as the 'Warburg effect', is driven by hyperactivity of lactate dehydrogenase A (LDHA). LDHA is thought to be a substrate-regulated enzyme, but it is unclear whether a dedicated intracellular protein also regulates its activity. Here, we identify the human tumor suppressor folliculin (FLCN) as a binding partner and uncompetitive inhibitor of LDHA. A flexible loop within the amino terminus of FLCN controls movement of the LDHA active-site loop, tightly regulating its enzyme activity and, consequently, metabolic homeostasis in normal cells. Cancer cells that experience the Warburg effect show FLCN dissociation from LDHA. Treatment of these cells with a decapeptide derived from the FLCN loop region causes cell death. Our data suggest that the glycolytic shift of cancer cells is the result of FLCN inactivation or dissociation from LDHA. Together, FLCN-mediated inhibition of LDHA provides a new paradigm for the regulation of glycolysis.

The Next Frontier for Designing Switchable Proteins: Rational Enhancement of Kinetics.

Designing proteins that can switch between active (ON) and inactive (OFF) conformations in response to signals such as ligand binding and incident light has been a tantalizing endeavor in protein engineering for over a decade. While such designs have yielded novel biosensors, therapeutic agents, and smart biomaterials, the response times (times for switching ON and OFF) of many switches have been too slow to be of practical use. Among the defining properties of such switches, the kinetics of switching has been the most challenging to optimize. This is largely due to the difficulty of characterizing the structures of transient states, which are required for manipulating the height of the effective free energy barrier between the ON and OFF states. We share our perspective of the most promising new experimental and computational strategies over the past several years for tackling this next frontier for designing switchable proteins.

Benzothiazolyl and Benzoxazolyl Hydrazones Function as Zinc Metallochaperones to Reactivate Mutant p53.

We identified a set of thiosemicarbazone (TSC) metal ion chelators that reactivate specific zinc-deficient p53 mutants using a mechanism called zinc metallochaperones (ZMCs) that restore zinc binding by shuttling zinc into cells. We defined biophysical and cellular assays necessary for structure-activity relationship studies using this mechanism. We investigated an alternative class of zinc scaffolds that differ from TSCs by substitution of the thiocarbamoyl moiety with benzothiazolyl, benzoxazolyl, and benzimidazolyl hydrazones. Members of this series bound zinc with similar affinity and functioned to reactivate mutant p53 comparable to the TSCs. Acute toxicity and efficacy assays in rodents demonstrated C1 to be significantly less toxic than the TSCs while demonstrating equivalent growth inhibition. We identified C85 as a ZMC with diminished copper binding that functions as a chemotherapy and radiation sensitizer. We conclude that the benzothiazolyl, benzoxazolyl, and benzimidazolyl hydrazones can function as ZMCs to reactivate mutant p53 in vitro and in vivo.

Insertion state of modular protein nanopores into a membrane.

In the past decade, significant progress has been made in the development of new protein nanopores. Despite these advancements, there is a pressing need for the creation of nanopores equipped with relatively large functional groups for the sampling of biomolecular events on their extramembranous side. Here, we designed, produced, and analyzed protein nanopores encompassing a robust truncation of a monomeric ß-barrel membrane protein. An exogenous stably folded protein was anchored within the aqueous phase via a flexible peptide tether of varying length. We have extensively examined the pore-forming properties of these modular protein nanopores using protein engineering and single-molecule electrophysiology. This study revealed distinctions in the nanopore conductance and current fluctuations that arose from tethering the exogenous protein to either the N terminus or the C terminus. Remarkably, these nanopores insert into a planar lipid membrane with one specific conductance among a set of three substate conductance values. Moreover, we demonstrate that the occurrence probabilities of these insertion substates depend on the length of the peptide tether, the orientation of the exogenous protein with respect to the nanopore opening, and the molecular mass of tethered protein. In addition, the three conductance values remain unaltered by major changes in the composition of modular nanopores. The outcomes of this work serve as a platform for further developments in areas of protein engineering of transmembrane pores and biosensor technology.

Loss of bound zinc facilitates amyloid fibril formation of leukocyte-cell-derived chemotaxin 2 (LECT2).

Aggregation of the circulating protein leukocyte-cell-derived chemotaxin 2 (LECT2) causes amyloidosis of LECT2 (ALECT2), one of the most prevalent forms of systemic amyloidosis affecting the kidney and liver. The I40V mutation is thought to be necessary but not sufficient for ALECT2, with a second, as-yet undetermined condition being required for the disease. EM, X-ray diffraction, NMR, and fluorescence experiments demonstrate that LECT2 forms amyloid fibrils in vitro in the absence of other proteins. Removal of LECT2's single bound Zn2+ appears to be obligatory for fibril formation. Zinc-binding affinity is strongly dependent on pH: 9-13 % of LECT2 is calculated to exist in the zinc-free state over the normal pH range of blood, with this fraction rising to 80 % at pH 6.5. The I40V mutation does not alter zinc-binding affinity or kinetics but destabilizes the zinc-free conformation. These results suggest a mechanism in which loss of zinc together with the I40V mutation leads to ALECT2.

Arsenic and an Old Place: Rescuing p53 Mutants in Cancer.

Tumor suppressor p53 lacks conventional drug binding pockets that would facilitate rescue of cancer-driving mutations. In this issue, Chen et al. discover a new role for an old drug, arsenic trioxide, in binding and stabilizing p53. The arsenic atom binds in a conserved, cryptic site and reactivates multiple p53 mutants.

EGCG binds intrinsically disordered N-terminal domain of p53 and disrupts p53-MDM2 interaction.

Epigallocatechin gallate (EGCG) from green tea can induce apoptosis in cancerous cells, but the underlying molecular mechanisms remain poorly understood. Using SPR and NMR, here we report a direct, µM interaction between EGCG and the tumor suppressor p53 (KD = 1.6 ± 1.4 µM), with the disordered N-terminal domain (NTD) identified as the major binding site (KD = 4 ± 2 µM). Large scale atomistic simulations (>100 µs), SAXS and AUC demonstrate that EGCG-NTD interaction is dynamic and EGCG causes the emergence of a subpopulation of compact bound conformations. The EGCG-p53 interaction disrupts p53 interaction with its regulatory E3 ligase MDM2 and inhibits ubiquitination of p53 by MDM2 in an in vitro ubiquitination assay, likely stabilizing p53 for anti-tumor activity. Our work provides insights into the mechanisms for EGCG's anticancer activity and identifies p53 NTD as a target for cancer drug discovery through dynamic interactions with small molecules.