RESUMEN
A major advantage of surgical robots is that they can reduce the invasiveness of a procedure by enabling the clinician to manipulate tools as they would in open surgery but through small incisions in the body. Neurosurgery has yet to benefit from this advantage. Although clinical robots are available for the least invasive neurosurgical procedures, such as guiding electrode insertion, the most invasive brain surgeries, such as tumor resection, are still performed as open manual procedures. To investigate whether robotics could reduce the invasiveness of major brain surgeries while still providing the manipulation capabilities of open surgery, we created a two-armed joystick-controlled endoscopic robot. To evaluate the efficacy of this robot, we developed a set of neurosurgical skill tasks patterned after the steps of brain tumor resection. We also created a patient-derived brain model for pineal tumors, which are located in the center of the brain and are normally removed by open surgery. In comparison, testing with existing manual endoscopic instrumentation, we found that the robot provided access to a much larger working volume at the trocar tip and enabled bimanual tasks without compression of brain tissue adjacent to the trocar. Furthermore, many tasks could be completed faster with the robot. These results suggest that robotics has the potential to substantially reduce the invasiveness of brain surgery by enabling certain procedures currently performed as open surgery to be converted to endoscopic interventions.
Asunto(s)
Robótica , Humanos , Neurocirujanos , Extremidad Superior , Mano , EndoscopiosRESUMEN
OBJECTIVE: Early adaptors of surgical simulation have documented a translation to improved intraoperative surgical performance. Similar progress would boost neurosurgical education, especially in highly nuanced epilepsy surgeries. This study introduces a hands-on cerebral hemispheric surgery simulator and evaluates its usefulness in teaching epilepsy surgeries. METHODS: Initially, the anatomical realism of the simulator and its perceived effectiveness as a training tool were evaluated by two epilepsy neurosurgeons. The surgeons independently simulated hemispherotomy procedures and provided questionnaire feedback. Both surgeons agreed on the anatomical realism and effectiveness of this training tool. Next, construct validity was evaluated by modeling the proficiency (task-completion time) of 13 participants, who spanned the experience range from novice to expert. RESULTS: Poisson regression yielded a significant whole-model fit (χ2 = 30.11, p < 0.0001). The association between proficiency when using the training tool and the combined effect of prior exposure to hemispherotomy surgery and career span was statistically significant (χ2 = 7.30, p = 0.007); in isolation, pre-simulation exposure to hemispherotomy surgery (χ2 = 6.71, p = 0.009) and career length (χ2 = 14.21, p < 0.001) were also significant. The mean (± SD) task-completion time was 25.59 ± 9.75 minutes. Plotting career length against task-completion time provided insights on learning curves of epilepsy surgery. Prediction formulae estimated that 10 real-life hemispherotomy cases would be needed to approach the proficiency seen in experts. CONCLUSIONS: The cerebral hemispheric surgery simulator is a reasonable epilepsy surgery training tool in the quest to increase preoperative practice opportunities for neurosurgical education.
Asunto(s)
Epilepsia , Hemisferectomía , Entrenamiento Simulado , Humanos , Hemisferectomía/métodos , Epilepsia/cirugía , Neurocirujanos , Curva de Aprendizaje , Competencia ClínicaRESUMEN
Importance: Wearing a face mask in school can reduce SARS-CoV-2 transmission but it may also lead to increased hand-to-face contact, which in turn could increase infection risk through self-inoculation. Objective: To evaluate the effect of wearing a face mask on hand-to-face contact by children while at school. Design, Setting, and Participants: This prospective randomized clinical trial randomized students from junior kindergarten to grade 12 at 2 schools in Toronto, Ontario, Canada, during August 2020 in a 1:1 ratio to either a mask or control class during a 2-day school simulation. Classes were video recorded from 4 angles to accurately capture outcomes. Interventions: Participants in the mask arm were instructed to bring their own mask and wear it at all times. Students assigned to control classes were not required to mask at any time (grade 4 and lower) or in the classroom where physical distancing could be maintained (grade 5 and up). Main Outcomes and Measures: The primary outcome was the number of hand-to-face contacts per student per hour on day 2 of the simulation. Secondary outcomes included hand-to-mucosa contacts and hand-to-nonmucosa contacts. A mixed Poisson regression model was used to derive rate ratios (RRs), adjusted for age and sex with a random intercept for class with bootstrapped 95% CIs. Results: A total of 174 students underwent randomization and 171 students (mask group, 50.6% male; control group, 52.4% male) attended school on day 2. The rate of hand-to-face contacts did not differ significantly between the mask and the control groups (88.2 vs 88.7 events per student per hour; RR, 1.00; 95% CI, 0.78-1.28; P = >.99). When compared with the control group, the rate of hand-to-mucosa contacts was significantly lower in the mask group (RR, 0.12; 95% CI, 0.07-0.21), while the rate of hand-to-nonmucosa contacts was higher (RR, 1.40; 95% CI, 1.08-1.82). Conclusions and Relevance: In this clinical trial of simulated school attendance, hand-to-face contacts did not differ among students required to wear face masks vs students not required to wear face masks; however, hand-to-mucosa contracts were lower in the face mask group. This suggests that mask wearing is unlikely to increase infection risk through self-inoculation. Trial Registration: ClinicalTrials.gov Identifier: NCT04531254.
Asunto(s)
COVID-19 , Niño , Masculino , Humanos , Femenino , COVID-19/prevención & control , Máscaras , SARS-CoV-2 , Estudios Prospectivos , Instituciones Académicas , OntarioRESUMEN
OBJECTIVE: Intraventricular hemorrhage (IVH) is a neurovascular complication due to premature birth that results in blood clots forming within the ventricles. Magnetic resonance-guided high-intensity focused ultrasound (MRgHIFU) has been investigated as a noninvasive treatment to lyse clots. The authors designed and constructed a robotic MRgHIFU platform to treat the neonatal brain that facilitates ergonomic patient positioning. The clot lysis efficacy of the platform is quantified using a brain phantom and clinical MRI system. METHODS: A thermosensitive brain-mimicking phantom with ventricular cavities was developed to test the clot lysis efficacy of the robotic MRgHIFU platform. Whole porcine blood was clotted within the phantom's cavities. Using the MRgHIFU platform and a boiling histotripsy treatment procedure (500 W, 10-msec pulse duration, 1.0% duty cycle, and 40-second duration), the clots were lysed inside the phantom. The contents of the cavities were vacuum filtered, and the remaining mass of the solid clot particles was used to quantify the percentage of clot lysis. The interior of the phantom's cavities was inspected for any collateral damage during treatment. RESULTS: A total of 9 phantoms were sonicated, yielding an average (± SD) clot lysis of 97.0% ± 2.57%. Treatment resulted in substantial clot lysis within the brain-mimicking phantoms that were apparent on postsonication T2-weighted MR images. No apparent collateral damage was observed within the phantom after treatment. The results from the study showed the MRgHIFU platform was successful at lysing more than 90% of a blood clot at a statistically significant level. CONCLUSIONS: The robotic MRgHIFU platform was shown to lyse a large percentage of a blood clot with no observable collateral damage. These results demonstrate the platform's ability to induce clot lysis when targeting through simulated brain matter and show promise toward the final application in neonatal patients.
Asunto(s)
Procedimientos Quirúrgicos Robotizados , Trombosis , Animales , Porcinos , Ultrasonografía , Hemorragia Cerebral/diagnóstico por imagen , Hemorragia Cerebral/cirugía , Ventrículos Cerebrales , Imagen por Resonancia Magnética/métodosRESUMEN
Percutaneous needle-based interventions such as transperineal prostate brachytherapy require the accurate placement of multiple needles to treat cancerous lesions within the target organ. To guide needle placement, magnetic resonance imaging (MRI) offers excellent visualization of the target lesion without the need for ionizing radiation. To date, multi-needle insertion relies on a grid template, which limits the ability to steer individual needles. This work describes an MR-compatible robot designed for the sequential insertion of multiple non-parallel needles under MR guidance. The 6-DOF system is designed with an articulated arm to extend the reach of the robot. This strategy presents a novel approach enabling the robot to maneuver around existing needles while minimizing the footprint of the robot. Forward kinematics as well as optimization-based inverse kinematics are presented. The impact of the robot on image quality was tested for four sequences (T1w-TSE, T2w-TSE, THRIVE and EPI) on a 3T Philips Achieva system. Quantification of the signal-to-noise ratio showed a 46% signal loss in a gelatin phantom when the system was powered on but no further adverse effects when the robot was moving. Joint level testing showed a maximum error of 2.10 ± 0.72°s for revolute joints and 0.31 ± 0.60 mm for prismatic joints. The theoretical workspace spans the proposed clinical target surface of 10 x 10 cm. Lastly, the feasibility of multi-needle insertion was demonstrated with four needles inserted under real-time MR-guidance with no visible loss in image quality.
RESUMEN
BACKGROUND: Hands-on neurosurgical simulations, specifically techniques involving white matter disconnection, are underdeveloped owing to the paucity of low indentation materials that can adequately mimic brain dissection. OBJECTIVE: To describe the discovery phase of developing a resective epilepsy surgery simulator by quantifying the physical properties of 6 materials and correlating the scores with surgeon feedback data. METHODS: Six materials, silicone, TissueMatrix, gel support, Synaptive hydrogel, dry SUP706, and moist SUP706 of equal dimension, were evaluated for hardness by measuring their resistance to indentation. Temporal lobe prototypes, 1 for each material, were dissected by 2 neurosurgeons and ordinal ranking assigned. Two null hypotheses were tested: one is that no differences in the indentation properties of the 6 materials analyzed would be elicited and the other is that there would be no correlation between indentation and surgeon feedback scores. Statistical comparison of the means of the different materials was performed using one-way analysis of variance. Surgeon feedback data and indentation score associations were analyzed using the Kendall rank correlation coefficient. RESULTS: A statistically significant effect (P value <.0001; α 0.05) was measured. Gel support and Synaptive hydrogel had the lowest indentation scores and similar physical properties. Moist support material scored lower than dry support (P = .0067). A strong positive correlation (Kendall tau = 0.9333, P < .0001) was ascertained between the surgeon feedback ranking and indentation scores. CONCLUSION: Reasonable material options for developing a resective epilepsy surgery are proposed and ranked in this article. Early involvement of surgeons is useful in the discovery phase of simulator invention.
Asunto(s)
Epilepsia , Epilepsia/cirugía , Retroalimentación , Dureza , Humanos , Hidrogeles , NeurocirujanosRESUMEN
BACKGROUND: Intraventricular hemorrhage (IVH) is one of the most serious neurovascular complications resulting from premature birth. It can result in clotting of blood within the ventricles, which causes a buildup of cerebrospinal fluid that can lead to posthemorrhagic ventricular dilation and posthemorrhagic hydrocephalus. Currently, there are no direct treatments for these blood clots as the standard of care is invasive surgery to insert a shunt. Magnetic resonance-guided high-intensity focused ultrasound (MRgHIFU) has been investigated as a noninvasive treatment to lyse blood clots. However, current MRgHIFU systems are not suitable in the context of treating IVH in neonates. PURPOSE: We have developed a robotic MRgHIFU neurosurgical platform designed to treat the neonatal brain. This platform facilitates ergonomic patient positioning and directs treatment through their open anterior fontanelle while providing a larger treatment volume. The platform is based on an MR-compatible robot developed by our group. Further development of the platform has warranted investigation of its targeting ability to assess its feasibility in the neonatal brain. This study aimed to quantify the platform's targeting accuracy, precision, and repeatability using a brain phantom and clinical MRI system. METHODS: A thermosensitive brain-mimicking phantom was developed to test the platform's targeting accuracy. Rectangular grid patterns were created with HIFU thermal energy "lesions" in the phantoms by targeting specific coordinate points. The intended target locations were demarcated by inserting carbon fiber rods through a targeting assessment template. Coordinates for the intended and actual targets were derived from T2-weighted MRI scans, and the centroid distance between them was measured. Subsequently, the platform's targeting accuracy was quantified according to equations derived from ISO Standard 9283:1998. RESULTS: HIFU ablation resulted in distinct thermal lesions within the thermosensitive phantoms, which appeared as discrete hypointense regions in T2-weighted MR scans. A total of 127 target points were included in the data analysis, which yielded a targeting accuracy of 0.6 mm and targeting precision of 1.2 mm. CONCLUSIONS: The robotic MRgHIFU platform was shown to have a high degree of accuracy, precision, and repeatability. The results demonstrate the platform's functionality when targeting through simulated brain matter. These results serve as an initial verification of the platform targeting ability and showed promise toward the final application in a neonatal brain.
Asunto(s)
Ultrasonido Enfocado de Alta Intensidad de Ablación , Neurocirugia , Procedimientos Quirúrgicos Robotizados , Robótica , Encéfalo/diagnóstico por imagen , Encéfalo/cirugía , Ultrasonido Enfocado de Alta Intensidad de Ablación/métodos , Humanos , Recién Nacido , Imagen por Resonancia Magnética/métodos , Espectroscopía de Resonancia MagnéticaRESUMEN
PURPOSE: Patients with pharmacoresistant refractory epilepsy may require epilepsy surgery to prevent future seizure occurrences. Conventional surgery consists of a large craniotomy with straight rigid tools with associated outcomes of morbidity, large tissue resections, and long post-operative recovery times. Concentric tube robots have recently been developed as a promising application to neurosurgery due to their nonlinear form and small diameter. The authors present a concept study to explore the feasibility of performing minimally invasive hemispherotomy with concentric tube robots. METHODS: A model simulation was used to achieve the optimal design and surgical path planning parameters of the concentric tube robot for corpus callosotomy and temporal lobectomy. A single medial burr hole was chosen to access the lateral ventricles for both white matter disconnections. RESULTS: The concentric tube robot was able to accurately reach the designated surgical paths on the corpus callosum and the temporal lobe. CONCLUSION: In a model simulation, the authors demonstrated the feasibility of performing corpus callosotomy and temporal lobectomy using concentric tube robots. Further advancements in the technology may increase the applicability of this technique for epilepsy surgery to better patient outcomes.
Asunto(s)
Epilepsia Refractaria , Epilepsia , Hemisferectomía , Robótica , Cuerpo Calloso/cirugía , Epilepsia Refractaria/cirugía , Epilepsia/cirugía , Hemisferectomía/métodos , Humanos , Procedimientos Neuroquirúrgicos/métodosRESUMEN
OBJECTIVE: While intraventricular hemorrhage (IVH) is associated with posthemorrhagic ventricular dilation (PHVD), not all infants affected by high-grade IVH develop PHVD. The authors aimed to determine clot-associated predictors of PHVD in a porcine model by varying the amount and rate of direct intraventricular injection of whole autologous blood. METHODS: Seven 1-week-old piglets underwent craniectomy and injection of autologous blood into the right lateral ventricle. They survived for a maximum of 28 days. MRI was performed prior to injection, immediately postoperatively, and every 7 days thereafter. T1-weighted, T2-weighted, and susceptibility-weighted imaging (SWI) sequences were used to segment ventricular and clot volumes. Spearman correlations were used to determine the relationship between blood and clot volumes and ventricular volumes over time. RESULTS: The maximum ventricular volume was up to 12 times that of baseline. One animal developed acute hydrocephalus on day 4. All other animals survived until planned endpoints. The interaction between volume of blood injected and duration of injection was significantly associated with clot volume on the postoperative scan (p = 0.003) but not the amount of blood injected alone (p = 0.38). Initial postoperative and day 7 clot volumes, but not volume of blood injected, were correlated with maximum (p = 0.007 and 0.014) and terminal (p = 0.014 and 0.036) ventricular volumes. Initial postoperative ventricular volume was correlated with maximum and terminal ventricular volume (p = 0.007 and p = 0.014). CONCLUSIONS: Initial postoperative, maximum, and terminal ventricular dilations were associated with the amount of clot formed, rather than the amount of blood injected. This supports the hypothesis that PHVD is determined by clot burden rather than the presence of blood products and allows further testing of early clot lysis to minimize PHVD risk.
RESUMEN
Brain dissection, an intricate neurosurgical skill, is central to life-saving procedures such as intrinsic brain tumor excision and resective epilepsy surgery. The aims of this manuscript are to outline the selection process of a suitable material for the development of a dissectible brain simulator and to present the use of support material, SUP 706, manufactured by Stratasys Ltd. as a non-waste alternative for sustainably engineering solutions for surgical education. A feasibility study was conducted through qualitative function deployment (QFD) followed by a material selection process. End-user requirements and manufacturing product characteristics were incorporated into the workflow. Three materials, silicone, TissueMatrix™ and support material each formed the primary component of the first two prototypes. Expert feedback, manufacturing cost, safety profiling, functional fidelity and post-processing time data were collected and analyzed. The unique break-away feature of moist support material was found to be more suitable than using silicone or TissueMatrix™ for demonstrating brain dissection techniques. In addition, support material displayed higher functional fidelity by mimicking surgical tissues such as pia mater, gray and white matter, and blood vessels. The cost of the support material prototype was 39% less that of TissueMatrix™ and roughly the same as the silicone model. It took twice as long to post-process the support material prototype than it did the TissueMatrix™ design. Support material lost its ideal dissection properties and began to disintegrate after 30 - 45 minutes. In conclusion 3D printer support material is a low-cost material for a dissectible brain simulator.Clinical Relevance- The use of support material as the primary material in developing a dissectible brain simulator is a promising way of advancing neurosurgical education.
Asunto(s)
Cabeza , Impresión Tridimensional , Simulación por Computador , SiliconasRESUMEN
OBJECTIVE(S): To create and validate a synthetic simulator for teaching tracheostomy and laryngotracheal reconstruction (LTR) using anterior costal cartilage and thyroid ala cartilage grafts. METHODS: A late adolescent/adult neck and airway simulator was constructed based on CT scans from a cadaver and a live patient. Images were segmented to create three-dimensional printed molds from which anatomical parts were casted. To evaluate the simulator, expert otolaryngologists - head and neck surgeons performed tracheostomy and LTR using anterior costal cartilage and thyroid ala cartilage grafts on a live anesthetized porcine model (gold standard) followed by the synthetic simulator. They evaluated each model for face validity (realism and anatomical accuracy) and content validity (perceived effectiveness as a training tool) using a five-point Likert scale. For each expert, differences for each item on each simulator were compared using Wilcoxon Signed-Rank tests with Sidak correction. RESULTS: Nine expert faculty surgeons completed the study. Experts rated face and content validity of the synthetic simulator an overall median of 4 and 5, respectively. There was no difference in scores between the synthetic model and the live porcine model for any of the steps of any of the surgical procedures. CONCLUSION: The synthetic simulator created for this study has high face and content validity for tracheostomy and LTR with anterior costal cartilage and thyroid ala cartilage grafts and was not found to be different than the live porcine model for these procedures. LEVEL OF EVIDENCE: 5 Laryngoscope, 131:E2378-E2386, 2021.
Asunto(s)
Enseñanza Mediante Simulación de Alta Fidelidad/métodos , Modelos Anatómicos , Procedimientos de Cirugía Plástica/educación , Traqueostomía/educación , Adolescente , Adulto , Obstrucción de las Vías Aéreas/cirugía , Alternativas al Uso de Animales/instrumentación , Alternativas al Uso de Animales/métodos , Animales , Cadáver , Cartílago Costal/trasplante , Humanos , Laringoestenosis/cirugía , Masculino , Maniquíes , Modelos Animales , Cuello/anatomía & histología , Cuello/diagnóstico por imagen , Cuello/cirugía , Otorrinolaringólogos/educación , Impresión Tridimensional , Procedimientos de Cirugía Plástica/métodos , Cirujanos/educación , Sus scrofa , Cartílago Tiroides/trasplante , Tomografía Computarizada por Rayos X , Tráquea/anatomía & histología , Tráquea/diagnóstico por imagen , Tráquea/cirugíaRESUMEN
Robot-assisted minimally invasive surgical (MIS) techniques offer improved instrument precision and dexterity, reduced patient trauma and risk, and promise to lessen the skill gap among surgeons. These approaches are common in general surgery, urology, and gynecology. However, MIS techniques remain largely absent for surgical applications within narrow, confined workspaces, such as neuroendoscopy. The limitation stems from a lack of small yet dexterous robotic tools. In this work, we present the first instance of a surgical robot with a direct magnetically-driven end effector capable of being deployed through a standard neuroendoscopic working channel (3.2 mm outer diameter) and operate at the neuroventricular scale. We propose a physical model for the gripping performance of three unique end-effector magnetization profiles and mechanical designs. Rates of blocking force per external magnetic flux density magnitude were 0.309 N/T, 0.880 N/T, and 0.351 N/T for the three designs which matched the physical model's prediction within 14.9% error. The rate of gripper closure per external magnetic flux density had a mean percent error of 11.2% compared to the model. The robot's performance was qualitatively evaluated during a pineal region tumor resection on a tumor analogue in a silicone brain phantom. These results suggest that wireless magnetic actuation may be feasible for dexterously manipulating tissue during minimally invasive neurosurgical procedures.
Asunto(s)
Neuroendoscopía , Robótica , Diseño de Equipo , Fuerza de la Mano , Humanos , Procedimientos Quirúrgicos Mínimamente Invasivos , Instrumentos QuirúrgicosRESUMEN
BACKGROUND: Given the morbidity and cost associated with cerebrospinal fluid shunt infections, many neurosurgical protocols implement "no-touch" technique to minimize infection. However, current surgical tools are not designed specifically for this task and surgeons often resort to using their hands to connect the shunt catheter to the valve. OBJECTIVE: To develop an efficient and effective shunt assembly tool. METHODS: Prototypes were designed using computer assisted software and machined in stainless steel. The amount of time and number of attempts it took volunteers to connect a Bacticel shunt catheter to a Delta valve were recorded using the new tool and standard shodded mosquitos. Scanning electron microscopy (SEM) was done on manipulated catheters to assess potential damage. Practicing neurosurgeons provided feedback. RESULTS: Nonsurgeon (n = 13) volunteers and neurosurgeons (n = 6) both completed the task faster and with fewer attempts with the new tool (mean 7.18 vs 15.72 s and 2.00 vs 6.36 attempts, P < .0001; mean 2.93 vs 5.96 s and 1.06 vs 2.94 attempts, P < .001, respectively). SEM of 24 manipulated catheters showed no microscopic damage. 100% of neurosurgeons surveyed (n = 10) would adapt the tool in their practice, 90% preferred use of the new tool compared to their existing method, and 100% rated it easier to use compared to existing instruments. CONCLUSION: The new tool shortened the time and number of attempts to connect a shunt catheter to a valve. Neurosurgeons preferred the new tool to existing instruments. There was no evidence of catheter damage with the use of this tool.
Asunto(s)
Hidrocefalia , Catéteres , Derivaciones del Líquido Cefalorraquídeo , Humanos , Hidrocefalia/cirugía , Neurocirujanos , Prótesis e ImplantesRESUMEN
Electrosurgery is used in the operating room on a daily basis as a means to cut tissue and maintain hemostasis. The principle of this technology lies in the transfer of electricity from an electrosurgical unit to the operating site on a patient's body and modifying the waveform of that electricity to achieve the desired surgical effect. Bipolar cautery uses two electrodes, an active and a return, both at the surgical site to perform electrosurgery. Bipolar cautery can be very useful in helping surgeons to operate; however, current designs are not well suited to a 2.1 mm working channel in endoscopic procedures due to their rigid structure, limited range of motion, and bulky design. This paper describes a novel approach to designing a minimally- invasive bipolar cautery tool suitable for flexible neuroendoscopy. The system features 1.9 mm diameter bipolar tips which resemble grasping forceps, making it easier for surgeons to hold tissue while performing electrosurgery. The electrode wires also function as the actuating cables used to open and close the tips, which require 2.10 mm to open the tips to 30.9 °. The results show that the tool can safely cauterize a porcine brain specimen at various settings on the electrosurgical unit, and increasing the setting increases the area of tissue affected by the electricity. Repeatability was demonstrated and exhaustion was reached after the tool was opened and closed 73 times. Future work will involve improving the current design to increase the number of cycles the tool can survive before losing function.
Asunto(s)
Neuroendoscopía , Animales , Electrocoagulación , Electrocirugia , Humanos , Neuroendoscopios , Instrumentos Quirúrgicos , PorcinosRESUMEN
OBJECTIVES/HYPOTHESIS: To evaluate the validity of a live porcine model for surgical training in tracheostomy and open-airway surgery. STUDY DESIGN: Prospective observational study. METHODS: Eleven expert otolaryngologists-head and neck surgeons rated a live porcine model's realism/anatomical accuracy (face validity) and perceived effectiveness as a training tool (content validity) for tracheostomy and laryngotracheoplasty using anterior costal cartilage and thyroid ala cartilage grafts using a 53-item post-trial questionnaire with a five-point Likert scale. RESULTS: Experts rated the face validity of the live porcine model a median (interquartile range [IQR]) of 4/5 (4-5) and the content validity a median (IQR) of 5/5 (4-5) for each surgical procedure. Overall, 91% strongly agreed or agreed that the simulator would increase trainee competency for tracheostomy and laryngotracheoplasty using costal cartilage graft, and 82% strongly agreed or agreed that it would increase trainee competency for laryngotracheoplasty using thyroid ala cartilage graft. CONCLUSIONS: The live porcine model has high face and content validity as a training tool for tracheostomy and laryngotracheoplasty using costal cartilage and thyroid ala cartilage grafts. This training model can help surgical trainees practice these complex, low-frequency procedures. LEVEL OF EVIDENCE: NA Laryngoscope, 130: 2063-2068, 2020.
Asunto(s)
Laringoplastia/educación , Traqueostomía/educación , Animales , Cartílago Costal/cirugía , Cirugía General/educación , Modelos Animales , Cuello/cirugía , Estudios Prospectivos , Reproducibilidad de los Resultados , Porcinos , Cartílago Tiroides/cirugíaRESUMEN
Objectives: The application of magnetic resonance-guided focused ultrasound (MRgFUS) for the treatment of neurological conditions has been of increasing interest. Conventional MR imaging can provide structural information about the effect of MRgFUS, where differences in ablated tissue can be seen, but it lacks information about the status of the cellular environment or neural microstructure. We investigate in vivo acute changes in water diffusion and white matter tracts in the brain of a piglet model after MRgFUS treatment using diffusion-weighted imaging (DWI) with histological verification of treatment-related changes. Methods: MRgFUS was used to treat the anterior body of the fornix in four piglets. T1 and diffusion-weighted images were collected before and after treatment. Mean diffusion-weighted imaging (MDWI) images were generated to measure lesion volumes via signal intensity thresholds. Histological data were collected for volume comparison and assessment of treatment effect. DWI metric maps of fractional anisotropy (FA), apparent diffusion coefficient (ADC), axial diffusivity (AD), radial diffusivity (RD), and mean diffusivity (MD) were generated for quantitative assessment. Fornix-related fiber tracts were generated before and after treatment for qualitative assessment. Results: The volume of treated tissue measured via MDWI did not differ significantly from histological measurements, and both were significantly larger than the treatment cell volume. Diffusion metrics in the treatment region were significantly decreased following MRgFUS treatment, with the peak change seen at the lesion core and decreasing radially. Histological analysis confirmed an area of coagulative necrosis in the targeted region with sharp demarcation zone with surrounding brain. Tractography from the lesion core and the fornix revealed fiber disruptions following treatment. Conclusions: Diffusion maps and fiber tractography are an effective method for assessing lesion volumes and microstructural changes in vivo following MRgFUS treatment. This study demonstrates that DWI has the potential to advance MRgFUS by providing convenient in vivo microstructural lesion and fiber tractography assessment after treatment.
RESUMEN
PURPOSE: Diffusion magnetic resonance imaging and tractography has an important role in the visualization of brain white matter and assessment of tissue microstructure. There is a lack of correspondence between diffusion metrics of live tissue, ex vivo tissue, and histological findings. The objective of this study is to elucidate this connection by determining the specific diffusion alterations between live and ex vivo brain tissue. This may have an important role in the incorporation of diffusion imaging in ex vivo studies as a complement to histological sectioning as well as investigations of novel neurosurgical techniques. METHODS: This study presents a method of high angular resolution diffusion imaging and tractography of intact and non-fixed ex vivo piglet brains. Most studies involving ex vivo brain specimens have been formalin-fixed or excised from their original biological environment, processes both of which are known to affect diffusion parameters. Thus, non-fixed ex vivo tissue is used. A region-of-interest based analysis of diffusion tensor metrics are compared to in vivo subjects in a selection of major white matter bundles in order to assess the translatability of ex vivo diffusion measurements. RESULTS: Tractography was successfully achieved in both in vivo and ex vivo groups. No significant differences were found in tract connectivity, average streamline length, or apparent fiber density. Significantly decreased diffusivity (mean, axial, and radial; p<0.0005) in the non-fixed ex vivo group and unaltered fractional anisotropy (p>0.059) between groups were observed. CONCLUSION: This study validates the extrapolation of non-fixed fractional anisotropy measurements to live tissue and the potential use of ex vivo tissue for methodological development.
Asunto(s)
Imagen de Difusión Tensora/métodos , Sustancia Blanca/diagnóstico por imagen , Animales , Anisotropía , Procesamiento de Imagen Asistido por Computador , Masculino , Modelos Animales , Sus scrofaRESUMEN
OBJECTIVE: Endoscopic resection of third-ventricle colloid cysts is technically challenging due to the limited dexterity and visualization provided by neuroendoscopic instruments. Extensive training and experience are required to master the learning curve. To improve the education of neurosurgical trainees in this procedure, a synthetic surgical simulator was developed and its realism, procedural content, and utility as a training instrument were evaluated. METHODS: The simulator was developed based on the neuroimaging (axial noncontrast CT and T1-weighted gadolinium-enhanced MRI) of an 8-year-old patient with a colloid cyst and hydrocephalus. Image segmentation, computer-aided design, rapid prototyping (3D printing), and silicone molding techniques were used to produce models of the skull, brain, ventricles, and colloid cyst. The cyst was filled with a viscous fluid and secured to the roof of the third ventricle. The choroid plexus and intraventricular veins were also included. Twenty-four neurosurgical trainees performed a simulated colloid cyst resection using a 30° angled endoscope, neuroendoscopic instruments, and image guidance. Using a 19-item feedback survey (5-point Likert scales), participants evaluated the simulator across 5 domains: anatomy, instrument handling, procedural content, perceived realism, and confidence and comfort level. RESULTS: Participants found the simulator's anatomy to be highly realistic (mean 4.34 ± 0.63 [SD]) and appreciated the use of actual instruments (mean 4.38 ± 0.58). The procedural content was also rated highly (mean 4.28 ± 0.77); however, the perceived realism was rated slightly lower (mean 4.08 ± 0.63). Participants reported greater confidence in their ability to perform an endoscopic colloid cyst resection after using the simulator (mean 4.45 ± 0.68). Twenty-three participants (95.8%) indicated that they would use the simulator for additional training. Recommendations were made to develop complex case scenarios for experienced trainees (normal-sized ventricles, choroid plexus adherent to cyst wall, bleeding scenarios) and incorporate advanced instrumentation such as side-cutting aspiration devices. CONCLUSIONS: A patient-specific synthetic surgical simulator for training residents and fellows in endoscopic colloid cyst resection was successfully developed. The simulator's anatomy, instrument handling, and procedural content were found to be realistic. The simulator may serve as a valuable educational tool to learn the critical steps of endoscopic colloid cyst resection, develop a detailed understanding of intraventricular anatomy, and gain proficiency with bimanual neuroendoscopic techniques.
RESUMEN
Bone conduction headphones (Fig. 1) offer the unique ability to provide auditory information to the user without obstructing external sounds. We apply this technology to robotic surgery to provide the surgeon with force feedback information with minimal distraction. The device is evaluated by pairing it with a force sensor that is attached to a suture pad. Four participants were tasked to complete 25 sutures on the suture pad while either receiving no feedback or audio, visual, or combined feedback that represents the magnitude of their applied force. Trials performed with bone conducting headphones had noticeable improvements compared to previous trials without feedback, while the most noticeable improvements were observed for cases with both visual and auditory feedback. Auditory feedback may have an important role in a robotic surgery setting and bone conduction headphones may enable this form of feedback with minimal distraction.
Asunto(s)
Procedimientos Quirúrgicos Robotizados , Conducción Ósea , Retroalimentación , Retroalimentación Sensorial , SuturasRESUMEN
Determination of the material properties of soft tissue is a growing area of interest that aids in the development of new surgical tools and surgical simulators. This study first aims to develop a robot-operated tissue testing system for determination of tissue cutting forces. Second, this system was used to ascertain the cutting properties of the hard and soft palate mucosa and soft palate musculature for the purpose of developing a robotic instrument for cleft palate surgery and a cleft-specific surgical simulator. The palate tissue was cut with a 15 blade mounted to the robot with varying angles (30°, 60°, 90°) and speeds (1.5, 2.5, 3.5â¯cm/s) of cutting to imitate typical operative tasks. The cutting force range for hard palate mucosa, soft palate mucosa and soft palate muscle were 0.98-3.30, 0.34-1.74 and 0.71-2.71â¯N, respectively. The break-in force of the cut (i.e. force required for the blade to penetrate the tissue) is significantly impacted by the angle of the blade relative to the tissue rather than the cutting speed. Furthermore, the total surface area of the tissue in contact with the blade during the cut has a significant impact on the total force expended on the tissue.