RESUMEN
High areal capacity and low-temperature ability are critical for lithium-ion batteries (LIBs). However, the practical operation is seriously impeded by the sluggish rates of mass and charge transfer. Herein, the active electronic states of TiNb2O7 material is modulated by dopant and O-vacancies for enhanced low-temperature dynamics. Femtosecond laser-based transient absorption spectroscopy is employed to depict carrier dynamics of TiNb2O7, which verifies the localized structure polarization accounting for reduced transport overpotential, facilitated electron/ion transport, and improved Li+ adsorption. At high-mass loading of 10 mg cm-2 and -30 °C, TNO-x@N microflowers exhibit stable cycling performance with 92.9% capacity retention over 250 cycles at 1 C (1.0-3.0 V, 1 C = 250 mA g-1). Even at -40 °C, a competitive areal capacity of 1.32 mAh cm-2 can be achieved. Such a fundamental understanding of the intrinsic structure-function put forward a rational viewpoint for designing high-areal-capacity batteries in cold regions.
RESUMEN
Limited triple-phase boundaries arising from the accumulation of solid discharge product(s) in solid-state cathodes (SSCs) pose a challenge to high-property solid-state lithium-oxygen batteries (SSLOBs). Light-assisted SSLOBs have been gradually explored as an ingenious system; however, the fundamental mechanisms of the SSCs interface behavior remain unclear. Here, we discovered that light assistance can enhance the fast inner-sphere charge transfer in SSCs and regulate the discharge products with spherical particles generated via the surface growth model. Moreover, the high photoelectron excitation and transportation capabilities of SSCs can retard cathodic catalytic decay by avoiding structural degradation of the cathode with a reduced charge voltage. The light-induced SSLOBs exhibited excellent stability (170â cycles) with a low discharge-charge polarization overpotential (0.27â V). Furthermore, transparent SSLOBs with exceptional flexibility, mechanical stability, and multiform shapes were fabricated for theory-to-practical applications in sunlight-induced batteries. Our study opens new opportunities for the introduction of solar energy into energy storage systems.
RESUMEN
High-entropy catalysts featuring exceptional properties are, in no doubt, playing an increasingly significant role in aprotic lithium-oxygen batteries. Despite extensive effort devoted to tracing the origin of their unparalleled performance, the relationships between multiple active sites and reaction intermediates are still obscure. Here, enlightened by theoretical screening, we tailor a high-entropy perovskite fluoride (KCoMnNiMgZnF3-HEC) with various active sites to overcome the limitations of conventional catalysts in redox process. The entropy effect modulates the d-band center and d orbital occupancy of active centers, which optimizes the d-p hybridization between catalytic sites and key intermediates, enabling a moderate adsorption of LiO2 and thus reinforcing the reaction kinetics. As a result, the Li-O2 battery with KCoMnNiMgZnF3-HEC catalyst delivers a minimal discharge/charge polarization and long-term cycle stability, preceding majority of traditional catalysts reported. These encouraging results provide inspiring insights into the electron manipulation and d orbital structure optimization for advanced electrocatalyst.
RESUMEN
Owing to high ionic conductivity and mechanical strength, poly(vinylidene fluoride) (PVDF) electrolytes have attracted increasing attention for solid-state lithium batteries, but highly reactive residual solvents severely plague cycling stability. Herein, we report a free-solvent-capturing strategy triggered by reinforced ion-dipole interactions between Li+ and residual solvent molecules. Lithium difluoro(oxalato)borate (LiDFOB) salt additive with electron-withdrawing capability serves as a redistributor of the Li+ electropositive state, which offers more binding sites for residual solvents. Benefiting from the modified coordination environment, the kinetically stable anion-derived interphases are preferentially formed, effectively mitigating the interfacial side reactions between the electrodes and electrolytes. As a result, the assembled solid-state battery shows a lifetime of over 2000 cycles with an average Coulombic efficiency of 99.9% and capacity retention of 80%. Our discovery sheds fresh light on the targeted regulation of the reactive residual solvent to extend the cycle life of solid-state batteries.
RESUMEN
[This corrects the article DOI: 10.1093/nsr/nwac272.].
RESUMEN
Simultaneously achieving high electrochemical activity and high loading for solid-state batteries has been hindered by slow ion transport within solid electrodes, in particular with an increase in electrode thickness. Ion transport governed by 'point-to-point' diffusion inside a solid-state electrode is challenging, but still remains elusive. Herein, synchronized electrochemical analysis using X-ray tomography and ptychography reveals new insights into the nature of slow ion transport in solid-state electrodes. Thickness-dependent delithiation kinetics are spatially probed to identify that low-delithiation kinetics originate from the high tortuous and slow longitudinal transport pathways. By fabricating a tortuosity-gradient electrode to create an effective ion-percolation network, the tortuosity-gradient electrode architecture promotes fast charge transport, migrates the heterogeneous solid-state reaction, enhances electrochemical activity and extends cycle life in thick solid-state electrodes. These findings establish effective transport pathways as key design principles for realizing the promise of solid-state high-loading cathodes.
RESUMEN
The local coordination environment of catalytical moieties directly determines the performance of electrochemical energy storage and conversion devices, such as Li-O2 batteries (LOBs) cathode. However, understanding how the coordinative structure affects the performance, especially for non-metal system, is still insufficient. Herein, a strategy that introduces S-anion to tailor the electronic structure of nitrogen-carbon catalyst (SNC) is proposed to improve the LOBs performance. This study unveils that the introduced S-anion effectively manipulates the p-band center of pyridinic-N moiety, substantially reducing the battery overpotential by accelerating the generation and decomposition of intermediate products Li1-3 O4 . The lower adsorption energy of discharging product Li2 O2 on NS pair accounts for the long-term cyclic stability by exposing the high active area under operation condition. This work demonstrates an encouraging strategy to enhance LOBs performance by modulating the p-band center on non-metal active sites.
RESUMEN
Single-atom catalysts have been paid more attention to improving sluggish reaction kinetics and anchoring polysulfide for lithium-sulfur (Li-S) batteries. It has been demonstrated that d-block single-atom elements in the fourth period can chemically interact with the local environment, leading to effective adsorption and catalytic activity toward lithium polysulfides. Enlightened by theoretical screening, for the first time, we design novel single-atom Nb catalysts toward improved sulfur immobilization and catalyzation. Calculations reveal that Nb-N4 active moiety possesses abundant unfilled antibonding orbitals, which promotes d-p hybridization and enhances anchoring capability toward lithium polysulfides via a "trapping-coupling-conversion" mechanism. The Nb-SAs@NC cell exhibits a high capacity retention of over 85% after 1000 cycles, a superior rate performance of 740 mA h g-1 at 7 C, and a competitive areal capacity of 5.2 mAh cm-2 (5.6 mg cm-2). Our work provides a new perspective to extend cathodes enabling high-energy-density Li-S batteries.
RESUMEN
Emerging directions in the growing wearable electronics market have spurred the development of flexible energy storage systems that require deformability while maintaining electrochemical performance. However, the traditional fabrication approaches of lithium-ion batteries (LIBs) are challenging to withstand long-cycle bending alternating loads due to the stress concentration caused by the nonuniformity of the actual deformation. Herein, inspired by kirigami, a segmented deformation design of full-cell scale thin-type flexible lithium-ion batteries (FLIBs) with large-scale manufacturing characteristics via the current collector's mechanical blanking process is reported. This strategy allows the battery's elliptical deformation of the actual state to be transformed into the circular strain of the ideal configuration, thereby dispersing the stress concentration on the top of the battery. According to the results, the designed battery maintains >95% capacity after >20 000 harsh in situ dynamic tests. In addition, finite element analysis further reveals the mechanism that the segmented deformation strategy bears the mechanical stress. This work can enlighten the rational design and customization of electrode patterns for high compatibility with various devices, thereby providing potential opportunities for the application of FLIBs.
RESUMEN
With the development of flexible devices, it is necessary to design high-performance power supplies with superior flexibility, durability, safety, etc., to ensure that they can be deformed with the device while retaining their electrochemical functions. Herein, we have designed a flexible lithium-ion battery inspired by the DNA helix structure. The battery structure is mainly composed of multiple thick energy stacks for energy storage and some grooves for stress buffers, which realized the spiral deformation of batteries. According to the results, the batteries exhibit less than 3% capacity degradation even after more than 31000 times of in situ dynamic mechanical loadings. Moreover, the mechanism of the battery with spiral deformability is further revealed. It is anticipated that this bioinspired design strategy could create unique opportunities for the commercialization of flexible batteries and fill the current gap in realizing battery-specific deformations to meet various requirements for future complex device designs.
Asunto(s)
Suministros de Energía Eléctrica , Litio , ADN , Iones , Litio/químicaRESUMEN
Mitigating the mechanical degradation and enhancing the ionic/electronic conductivity are critical but challengeable issues toward improving electrochemical performance of conversion-type anodes in rechargeable batteries. Herein, these challenges are addressed by constructing interconnected 3D hierarchically porous structure synergistic with Nb single atom modulation within a Co3 O4 nanocage (3DH-Co3 O4 @Nb). Such a hierarchical-structure nanocage affords several fantastic merits such as rapid ion migration and enough inner space for alleviating volume variation induced by intragrain stress and optimized stability of the solid-electrolyte interface. Particularly, experimental studies in combination with theoretical analysis verify that the introduction of Nb into the Co3 O4 lattice not only improves the electron conductivity, but also accelerates the surface/near-surface reactions defined as pesudocapacitance behavior. Dynamic behavior reveals that the ensemble design shows huge potential for fast and large lithium storage. These features endow 3DH-Co3 O4 @Nb with remarkable battery performance, delivering ≈740 mA h g-1 after ultra-long cycling of 1000 times under a high current density of 5 A g-1 . Importantly, the assembled 3DH-Co3 O4 @Nb//LiCoO2 pouch cell also presents a long-lived cycle performance with only ≈0.059% capacity decay per cycle, inspiring the design of electrode materials from both the nanostructure and atomic level toward practical applications.
RESUMEN
Soluble redox mediators (RMs), an alternative to conventional solid catalysts, have been considered an effective countermeasure to ameliorate sluggish kinetics in the cathode of a lithium-oxygen battery recently. Nevertheless, the high mobility of RMs leads to serious redox shuttling, which induces an undesired lithium-metal degeneration and RM decomposition during trade-off catalysis against the sustainable operation of batteries. Here, a novel carbon family of graphdiyne matrix is first proposed to decouple the charge-carrying redox property of ferrocene and the shuttle effects. It is demonstrated that a ferrocene-anchored graphdiyne framework can function as stationary RM, not only preserving the redox-mediating capability of ferrocene, but also promoting the local orientated three-dimensional (3D) growth of Li2 O2 . As a result, the RM-assisted catalysis in lithium-oxygen battery remains of remarkable efficiency and stability without the depletion of oxidized RMs or lithium degradation, resulting in a significantly enhanced electrochemical performance.
RESUMEN
Establishing a stable, stress-relieving configuration is imperative to achieve a reversible silicon anode for high energy density lithium-ion batteries. Herein, we propose a silicon composite anode (denoted as T-Si@C), which integrates free space and mixed carbon shells doped with rigid TiO2/Ti5Si3 nanoparticles. In this configuration, the free space accommodates the silicon volume fluctuation during battery operation. The carbon shells with embedded TiO2/Ti5Si3 nanoparticles maintain the structural stability of the anode while accelerating the lithium-ion diffusion kinetics and mitigating interfacial side reactions. Based on these advantages, T-Si@C anodes demonstrate an outstanding lithium storage performance with impressive long-term cycling reversibility and good rate capability. Additionally, T-Si@C//LiFePO4 full cells show superior electrochemical reversibility. This work highlights the importance of rational structural manipulation of silicon anodes and affords fresh insights into achieving advanced silicon anodes with long life.
RESUMEN
Owing to the promise of high safety and energy density, all-solid-state batteries are attracting incremental interest as one of the most promising next-generation energy storage systems. However, their widespread applications are inhibited by many technical challenges, including low-conductivity electrolytes, dendrite growth, and poor cycle/rate properties. Particularly, the interfacial dynamics between the solid electrolyte and the electrode is considered as a crucial factor in determining solid-state battery performance. In recent years, intensive research efforts have been devoted to understanding the interfacial behavior and strategies to overcome these challenges for all-solid-state batteries. Here, the interfacial principle and engineering in a variety of solid-state batteries, including solid-state lithium/sodium batteries and emerging batteries (lithium-sulfur, lithium-air, etc.), are discussed. Specific attention is paid to interface physics (contact and wettability) and interface chemistry (passivation layer, ionic transport, dendrite growth), as well as the strategies to address the above concerns. The purpose here is to outline the current interface issues and challenges, allowing for target-oriented research for solid-state electrochemical energy storage. Current trends and future perspectives in interfacial engineering are also presented.
RESUMEN
Interfacial issues commonly exist in solid-state batteries, and the microstructural complexity combines with the chemical heterogeneity to govern the local interfacial chemistry. The conventional wisdom suggests that "point-to-point" ion diffusion at the interface determines the ion transport kinetics. Here, we show that solid-solid ion transport kinetics are not only impacted by the physical interfacial contact but are also closely associated with the interior local environments within polycrystalline particles. In spite of the initial discrete interfacial contact, solid-state batteries may still display homogeneous lithium-ion transportation owing to the chemical potential force to achieve an ionic-electronic equilibrium. Nevertheless, once the interior local environment within secondary particle is disrupted upon cycling, it triggers charge distribution from homogeneity to heterogeneity and leads to fast capacity fading. Our work highlights the importance of interior local environment within polycrystalline particles for electrochemical reactions in solid-state batteries and provides crucial insights into underlying mechanism in interfacial transport.
RESUMEN
Iron fluoride compounds offer an exciting pathway toward low-cost and high-capacity conversion-type lithium-ion battery (LIB) cathodes. However, due to the sluggishness of the electronic and ionic transport in iron fluorides, mass loadings of active materials in previous studies are typically less than 2.5 mg cm-2, which is too low for practical applications. Herein, we improve the charge transport in fluoride electrodes at both nano- and mesoscales to enable high-mass-loading fluoride electrodes. At the nanoscale, we prepare electronically conducting LixTiO2 composites with FeOF nanoparticles to reduce electron transport distance to 5-10 nm, which is one of the shortest among reports. At the mesoscale, we design a percolating three-dimensional porous carbon nanotube (CNT) network to enable fast pathways for both electrons and ions. The resulting spongelike material, FeOF/TiO2@CNT, substantially enhances the kinetics of the conversion reaction in FeOF, boosts extra lithium storage capacity, and reduces the voltage hysteresis. Steady cycling over 300 cycles is achieved at a high mass loading of 8.7 mg cm-2 (FeOF/TiO2) (1.74 mAh cm-2). Such areal capacity of lithium storage is significantly higher than previously reported iron fluorides-based structures, a significant step forward toward the development of low-cost metal fluoride electrodes.
RESUMEN
Single-crystal cathode materials for lithium-ion batteries have attracted increasing interest in providing greater capacity retention than their polycrystalline counterparts. However, after being cycled at high voltages, these single-crystal materials exhibit severe structural instability and capacity fade. Understanding how the surface structural changes determine the performance degradation over cycling is crucial, but remains elusive. Here, we investigate the correlation of the surface structure, internal strain, and capacity deterioration by using operando X-ray spectroscopy imaging and nano-tomography. We directly observe a close correlation between surface chemistry and phase distribution from homogeneity to heterogeneity, which induces heterogeneous internal strain within the particle and the resulting structural/performance degradation during cycling. We also discover that surface chemistry can significantly enhance the cyclic performance. Our modified process effectively regulates the performance fade issue of single-crystal cathode and provides new insights for improved design of high-capacity battery materials.
RESUMEN
Rechargeable lithium-oxygen batteries have shown great potential as next-generation sustainable and green energy storage systems. The bifunctional catalyst plays an important role in accelerating the cathode kinetics for practical realization of the batteries. Herein, we employ the surface structure and defect engineering to introduce surface-roughened nanolayers and oxygen vacancies on the mesoporous hollow LaCoxMn1-xO3-σ perovskite catalyst by in situ cation substitution. The experimental results show that the O2-electrode with the LaCo0.75Mn0.25O3-σ catalyst exhibits an extremely high discharge capacity of 10,301 mA h g-1 at 200 mA g-1 for the initial cycle and superior cycling stability under a capacity limit of 500 mA h g-1 together with a low voltage gap of 1.12 V. Good electrochemical performance of LaCo0.75Mn0.25O3-σ can be attributed to the synergistic effect of the hierarchical mesoporous hollow structure and the abundant oxygen vacancies all over the catalyst surface. We reveal that the modified surface structure can provide more accessibility of active sites to promote electrochemical reactions, and the introduced oxygen vacancy can serve as an efficient substrate for binding intermediate products and decomposition reactions of Li2O2 during discharge and charge processes. Our methodology provides meaningful insights into the rational design of highly active perovskite catalysts in energy storage/conversion systems.
RESUMEN
Titanium-based oxides including TiO2 and M-Ti-O compounds (M = Li, Nb, Na, etc.) family, exhibit advantageous structural dynamics (2D ion diffusion path, open and stable structure for ion accommodations) for practical applications in energy storage systems, such as lithium-ion batteries, sodium-ion batteries, and hybrid pseudocapacitors. Further, Ti-based oxides show high operating voltage relative to the deposition of alkali metal, ensuring full safety by avoiding the formation of lithium and sodium dendrites. On the other hand, high working potential prevents the decomposition of electrolyte, delivering excellent rate capability through the unique pseudocapacitive kinetics. Nevertheless, the intrinsic poor electrical conductivity and reaction dynamics limit further applications in energy storage devices. Recently, various work and in-depth understanding on the morphologies control, surface engineering, bulk-phase doping of Ti-based oxides, have been promoted to overcome these issues. Inspired by that, in this review, the authors summarize the fundamental issues, challenges and advances of Ti-based oxides in the applications of advanced electrochemical energy storage. Particularly, the authors focus on the progresses on the working mechanism and device applications from lithium-ion batteries to sodium-ion batteries, and then the hybrid pseudocapacitors. In addition, future perspectives for fundamental research and practical applications are discussed.
RESUMEN
All-solid-state batteries have attracted attention owing to the potential high energy density and safety; however, little success has been made on practical applications of solid-state batteries, which is largely attributed to the solid-solid interface issues. A fundamental elucidation of electrode-electrolyte interface behaviors is of crucial significance but has proven difficult. The interfacial resistance and capacity fading issues in a solid-state battery were probed, revealing a heterogeneous phase transition evolution at solid-solid interfaces. The strain-induced interfacial change and the contact loss, as well as a dense metallic surface phase, deteriorate the electrochemical reaction in solid-state batteries. Furthermore, the inâ situ growth of electrolytes on secondary particles is proposed to fabricate robust solid-solid interface. Our study enlightens new insights into the mechanism behind solid-solid interfacial reaction for optimizing advanced solid-state batteries.