Extrusion of Sodium Hypochlorite in Oval-Shaped Canals: A Comparative Study of the Potential of Four Final Agitation Approaches Employing Agarose-Embedded Mandibular First Premolars.

Background: The aim of this investigation was to assess the apical extrusion potential of sodium hypochlorite (NaOCl) in agarose-embedded mandibular first premolars employing four final agitation procedures. Methods: Based on CBCT confirmation of single oval-shaped canals, one hundred extracted mandibular first premolars were chosen. Using 5.25% NaOCl, the teeth were prepared using the XP Endo Shaper and divided into experimental and control groups. The following were the experimental groups: Group 1 comprised the XP-Endo Finisher, Group 2 the Ultrasonic Activation, Group 3 the Gentle File Finisher Brush, and Group 4 the 27-gauge side-vented needle. To test extrusion, the teeth were placed in a 0.2% agarose gel that contained the pH-sensitive dye m-cresol purple, allowing pixel quantification via ImageJ software (version 1.54i). Results: The XP Endo Finisher featured the most pixels, depicting higher apical extrusion (p < 0.01), followed by the side-vented needle, Gentle File Finisher Brush, and PUI, while the Control Group endured no extrusion. Conclusions: The effective irrigation method for root canal therapy is critical, especially in situations of open apices, resorption, or perforation. According to in vitro experiments, the XP-Endo Finisher has the maximum sodium hypochlorite extrusion, which is determined by parameters such as apical preparation size and irrigation system.

Analyzing working time and efficient caries removal using a novel bioactive caries detecting dye and air polisher prophy for caries excavation: randomised clinical trial.

OBJECTIVES: This study aims to analyze the working time consumed during caries excavation and pain perception while using a novel Bioactive caries-detecting dye solution (BCD), an Air Polisher Prophy and a combination. MATERIALS AND METHODS: Four groups (in each group, n = 20 permanent teeth) were selected from 60 people between 17 and 40 years of age. The study included teeth with occlusal dentinal caries in the molars with cavity entrance sizes of less than 2 mm (clinically and radiographically). Randomization software was used to assign patients to various groups. Group A: Conventional Rotary Drilling, Group B: BCD + Mechanical Excavation (Spoon Excavator), Group C: Air Polisher Prophy, and Group D: BCD + Air Polisher Prophy 0.5 mL BCD was applied with a micro brush to the carious tooth surface for 40 s in groups B and D. After that, radiographs were performed to see if the radiopaque extension was visible. For mechanical caries extraction, a spoon excavator was used for group B, and an air polisher prophy was employed for group D. For mechanical caries extraction, a spoon excavator was utilized for group B. An air polisher prophy was employed for group D. Multiple applications of the BCD were used in the event of residual caries. Working time and pain experienced during caries excavation were registered using the Verbal Pain Scale (VPS) (score 0-4), and caries removal was clinically graded using the modified Scale (score 0-5). RESULTS: The time taken was Group A, Group D, Group B, and Group C, according to statistical analysis using ANOVA and the Post Hoc Test (275.02, 403.8, 461.98, 615.41 s, respectively). Group A had the highest mean VPS (1.85), whereas Group B had the most minor pain (0.6), followed by Group D (1.2) and Group C (0.6). (1.45). Group C (2.35), followed by groups D (1.75), B (1.30), and A (1.30), had ineffective caries eradication (0.90). (p < 0.05). CONCLUSIONS: compared to group C, groups B and D took less time and had less/no pain while excavating caries. Compared to traditional mechanized caries removal methods, the chemo-chemical BCD can diagnose and aid in successful caries removal with minimal pain. CLINICAL RELEVANCE: The outcomes of the present study demonstrated that the chemo-chemical bioactive caries detecting dye solution has the potential to identify and help in effective caries removal before mechanized caries removal methods.

Retrospective evaluation of the morphometric properties of intact maxillary sinus using cone-beam computed tomography for sex estimation in an Indian population.

Background: Sex estimation is crucial to forensic examinations. In order to estimate sex, intact bones are used if the majority of bones are severely deformed and recovered in fragments. This study aims to analyze sexual dimorphism in intact maxillary sinuses using CBCT scanning to evaluate morphometric properties for sex identification. Methods: A total of 318 subjects, consisting of 159 males and 159 females, aged between 20 and 60 years without sinus pathology were included in this diagnostic, retrospective cross-sectional study. Bilateral measurements of the volume, height, width, and length of the maxillary sinuses were obtained and compared to evaluate the differences between sexes. Subsequently, a descriptive analysis using mean and standard deviation was performed, followed by a comparison between sexes with a p-value being less than 0.05 and Student's t-test. Finally, a discriminant analysis was performed separately for the right and left maxillary sinuses. Results: Males and females showed statistically significant variations in the length, width, and volume of the maxillary sinuses. Specifically, on the right side, males had longer maxillary sinuses than females (t = 5.6203, p < 0.0001). Meanwhile, on the left side, females had wider maxillary sinuses than males (t = 8.621, plt0.0001). In addition, males had greater volumes of maxillary sinuses on the right (t = 6.373, p < 0.0001) and left (t = 3.091, p < 0.0001) sides than females. The results of the discriminant analysis showed that the left width parameter had the highest accuracy of sex estimation (74.21%), followed by the Right Length (70.07%) and left volume (66.66%) parameters. The left height parameter had the lowest accuracy of sex estimation (49.37%). Conclusion: In forensic odontology, the volume of maxillary sinus can serve as a valid radiographic indicator of sex estimation.

Dislodgement resistance and structural changes of tricalcium silicate-based cements after exposure to different chelating agents.

This study aimed to evaluate the dislodgement resistance and structural changes of different mineral trioxide aggregate cements (MTA) like Pro-Root MTA, Ortho MTA, and Retro MTA after exposure to sodium hypochlorite (NaOCl), NaOCl-Ethylenediaminetetraacetic acid (EDTA), 1-hydroxyethylidene-1, 1-bisphosphonate (Dual Rinse HEDP), and NaOCl-Maleic acid (MA). The root canal spaces of 150 dentine slices were obturated using tricalcium silicate cements and divided into 3 groups (n = 50): Group1: ProRoot MTA, Group2: Retro MTA, and Group3: Ortho MTA. The samples in each group were further subdivided into four experimental (n = 10) and one control groups (n = 10): 2.5% NaOCl-17% EDTA, Dual Rinse HEDP, 2.5% NaOCl-7% Maleic acid, 2.5% NaOCl, distilled water (control). The dislodgement resistance and structural changes of cements were measured. Use of DR HEDP resulted in higher dislodgement resistance compared to17% EDTA and 7% MA in the samples obturated with Ortho MTA and Pro-Root MTA (p<0.001). In Retro MTA group, samples treated with DR HEDP and 17% EDTA had higher dislodgment resistance compared to 7% MA (p<0.001). On microstructural and elemental analysis of all the three MTA cements, samples treated with 17% EDTA and 7% MA were more amorphous and granular when compared to DR HEDP, which was pettle shaped. Calcium level was decreased more in samples treated with 17% EDTA and 7% MA when compared to DR HEDP.

Micro computed tomography (Micro-CT) characterization of root and root canal morphology of mandibular first premolars: a systematic review and meta-analysis.

INTRODUCTION: Mandibular first premolars are familiar with their varied root canal morphology, causing difficulties and challenges for successful endodontic procedures. This systematic review and meta-analysis aim to study the characterization of root and canal morphology of the first mandibular premolar using micro-computed tomography. METHODOLOGY: The literature search was conducted using electronic web databases like PubMed, Scopus, ScienceDirect and Cochrane with the chosen MeSH key words and data was retrieved until May 2023. Further to perform the statistical analysis, R v 4.3.1 software with "meta", 'metafor" "metaviz" " ggplot2" package was used, and results were represented by odds ratios (OR) and the percentage of forest plots along a 95 per cent confidence interval (CI). RESULTS: The total number of studies meeting the inclusion criteria was 13; these studies were conducted on mandibular first premolar using Micro-CT; the total sample size was 1817. To scan the sample, an X-ray micro-focus CT system (Siemens Inveon CT, Erlangen, Germany) was used in four studies and seven different machines were used in the respective studies. Mimics 10.01 software (Materialize, Leuven, Belgium) and NRecon v.1.6.9 software (Bruker, Kontich, Belgium) were commonly operated. The minimum and maximum voxel size ranges between 11.94 and 50 µm. Vertucci's classification was frequently used (9), while one study applied Ahmed et al. and Vertucci's classification. CONCLUSION: This systematic review provides essential information about the root and canal configurations, radicular grooves, accessory canals, and apical foramina through Micro-CT, aiming to improve the accuracy of endodontic treatment and help practitioners.

Knowledge, Practices, and Nasal Carriage Rate of MRSA Amongst Dental Professionals.

OBJECTIVE: Resistance of Staphylococcus aureus (S. aureus) against common antibiotics has been increasing given the rampant use of antibiotics. Methicillin-resistant S. aureus (MRSA) is particularly important because it has been reported to present in hospital-acquired as well as community-acquired infections. Our aim was to study the types and subtypes of MRSA isolated from nasal swabs taken from volunteering dental school students and to assess and analyse the knowledge of dental health care workers (DHCWs) on MRSA and prevention of its infection. METHODS: A total of 100 participants, which included staff, students, and dental auxiliaries, from the School of Dental Sciences, Krishna Institute of Medical Sciences, Deemed to Be University, Karad, India, were included in the study which was conducted from June 2020 to 1 June 2021. All the participants completed a survey and underwent collection of nasal swabs. The samples were cultured and underwent microbiological and molecular analysis for MRSA. The questionnaire was sent out electronically via SurveyMonkey. RESULTS: Sixty-three percent of the participants were female. The majority were undergraduate students (66%) and younger than 25 years (77%). The prevalence of MRSA in the sample was the MRSA type SCCmec type V (54.8%). The survey reports a lack of knowledge amongst dental students on MRSA and prevention of its infection. The majority (69%) of participants had not heard of MRSA infection and had inadequate knowledge of MRSA infection. Only 29% of the participants think that a healthy person may have MRSA without feeling ill. Eighty-five percent of the participants reported that they have written polices and guidelines to control MRSA. Eighty-five percent of the participants indicated that they are less confident in their knowledge on MRSA infection control protocols, and 94% mentioned that the dental clinics have written guidelines for hand hygiene. CONCLUSIONS: DHCWs have limited knowledge of MRSA infection, emphasising the need for appropriate clinical training. Academic institutions should promote effective infection control training to protect students, faculty, and other employees.

Bibliometric Analysis of Context, Trends, and Contents of Digital Health Technology Used in Dental Health.

Digital tools and apps are revolutionizing healthcare and provide creative answers to urgent problems. Through teamwork and the incorporation of digital technologies, dentistry has experienced a remarkable revolution. A large body of scholarly research backs up this trend. The context, trends, and content of digital health technology in oral and dental health are examined in our bibliometric analysis. Using targeted keywords and synonyms, an organized searching technique was used in the Scopus database, yielding 1942 articles that were extracted into a CSV file. To acquire insights into the content, trends, and context, visualization using VOSviewer 1.6.18 and a variety of analyses-including coauthorship, citation, cooccurrence of author keywords, bibliographic coupling, and cocitation-were executed. The analysis revealed that the USA and the UK contributed to a significant quantity of the literature, with newer contributions coming from nations like India. Cone Beam Computed Tomography, Dental Caries, and Artificial Intelligence were prominent keywords. It is important to note that BMC Oral Health was associated with a sizable number of the papers. This bibliometric analysis provides insightful information about the context, content, and trends of digital health in the field of oral and dental health. By implementing the right technology, policymakers can use this information to increase oral health, encourage dental literacy, and improve access to dental treatment. It is vital to take into account the wide variety of technologies and their classifications based on dental services and contextual variables.

Alveolar Ridge Augmentation Assessment Using a Minimalistic Approach, with and without Low-Level Laser Therapy (LLLT)-A Comparative Clinical Trial.

Background and Objective: A narrow alveolar ridge is an obstacle to optimal rehabilitation of the dentition. There are several complex and invasive techniques to counter the ridge augmentation dilemma, with most of them exhibiting low feasibility. Hence, this randomized clinical trial aims to evaluate the effectiveness of a Minimalistic Ridge Augmentation (MRA) technique, in conjunction with low-level laser therapy (LLLT). Materials and Methods: A total of 20 patients (n = 20) were selected, with 10 assigned to the test group (MRA+LLLT) and the other 10 to the control group (MRA). A vertical incision of approximately 10 mm was placed mesial to the defect and tunneled to create a subperiosteal pouch across the entire width of the defect. At the test sites, a diode laser (AnARC FoxTM Surgical Laser 810 nm) was used to deliver LLLT (parameters: 100 mW, with a maximum energy distribution of 6 J/cm2 in the continuous wave mode for 60 s per point) to the exposed bone surface inside the pouch, followed by graft (G-Graft, SurgiwearTM, Shahjahanpur, India) deposition with a bone graft carrier. The control sites were not irradiated with a laser. Results: A horizontal ridge width gain of >2 mm was observed in both groups. The changes in bone density for the test and control groups were -136 ± 236.08 HU and -44.30 ± 180.89 HU, respectively. Furthermore, there was no statistically significant difference between the test and control groups in these parameters. Conclusion: The study findings reveal that the MRA technique is relatively simple and feasible for alveolar ridge augmentation. The role of LLLT in the process requires further elucidation.

Microbiological Effectiveness of Sodium Hypochlorite Gel and Aqueous Solution When Implemented for Root Canal Disinfection in Multirooted Teeth: A Randomized Clinical Study.

The aim of endodontic therapy is to use various antimicrobial medications for proper cleaning and shaping to create an environment free of microorganisms by eradicating as many as possible from the root canal space. Even although it is a gold standard irrigant, sodium hypochlorite (NaOCl) is known for its cytotoxic effects on vital periapical tissues, making its higher concentrations inappropriate for use in conditions such as wide, underdeveloped, or damaged apices and in cases of perforations. Consequently, if it is ascertained that a gel form of sodium hypochlorite has equivalent antibacterial activity to the aqueous solution form, it could be employed in such situations. The aim of this study was the microbiologic evaluation of 5.25% sodium hypochlorite gel and aqueous solution as root canal disinfectants in multirooted teeth with primary endodontic lesions. Following ethical approval and CTRI registration, 42 patients who gave their consent and had multirooted teeth with pulpal necrosis and asymptomatic apical periodontitis were considered for the study. Following the opening of the access, pre-endodontic build up in case of class-II cavities and working length determination, a pre-operative sample (S1), which was regarded as the pre-operative microbial load of that canal, was acquired from the largest canal using a sterile paper point while maintaining strict isolation and disinfection. The computer randomization approach was used to divide the teeth into two groups at random just before beginning of chemo-mechanical preparation: Group A (n = 21)-canal disinfection with 5.25% sodium hypochlorite gel; Group B (n = 21)-canal disinfection with 5.25% sodium hypochlorite aqueous solution. Following the canal disinfection, a post-operative (S2) sample which was regarded as the postoperative microbial load of that canal was collected from the same canal using a sterile paper point. The Colony-Forming Units (CFUs) for the S1 and S2 samples were determined after 48 h aerobic incubation on Brain Heart Infusion (BHI) agar plates. The patients and the microbiologist were blinded throughout the procedure. Using SPSS 20.0 software (USA), the Shapiro-Wilk test and the Lilliefors Significance Correction were used for normality, followed by the Mann-Whitney U test which was used to compare the CFU difference (×105) between the two groups. A p value of <0.05 was perceived as statistically significant. The mean colony-forming units count difference between the 5.25% sodium hypochlorite gel and aqueous solution groups did not differ in a manner that was statistically significant (p = 0.744). In multirooted teeth with primary endodontic lesions, the 5.25% sodium hypochlorite gel and the aqueous solution demonstrated comparable antimicrobial effectiveness when implemented as root canal disinfectants.

Acceptance of COVID-19 Vaccines in India: A Systematic Review and Meta-Analysis.

This systematic review and meta-analysis sought to evaluate the acceptability levels for COVID vaccine(s) in various states in India. Published articles in PubMed/Scopus/Cochrane/DOAJ/the Web of Science that focused on assessing COVID-19 vaccine hesitation/vaccine acceptance using a survey/questionnaire were included. After extensive research, 524 records were found, and after screening on the basis of eligibility criteria, only 23 papers were added to this review. Increased vaccine assumption percentage (>70%) among the population was found in two surveys nationwide (92.8%) and in Delhi (79.5%). For pooled estimates of COVID-19 vaccine acceptance and heterogeneity, twenty-three studies (23) consisting of 39,567 individuals reported for acceptance of COVID 19 vaccine in India.. Out of these, 26,028 individuals accepted the COVID-19 vaccine, giving a pooled estimate of 62.6% (95% CI: 55.6-69.4) with considerable heterogeneity (χ2 = 3397.3, p < 0.0001; I2 = 99.40%). The results of this study give a brief insight into the percentage acceptance and hesitancy among the Indian population regarding COVID-19 vaccine immunisation. Future research and vaccine education initiatives can be steered by the findings of this work as a starting point.

Comparison of Postoperative Pain After the Utilization of Different File Systems in Single Visit Endodontics.

Purpose: This prospective single-blind, parallel-group, randomized clinical trial was aimed to compare the effect of three different rotary instrumentation systems ProTaper Next (PTN), Self-Adjusting File (SAF) and XP-endo Shaper (XPS) on postoperative pain and analgesic intakes. Patients and Methods: A total of 159 molars diagnosed with symptomatic irreversible pulpitis were randomly divided into three study groups according to the instrumentation techniques: PTN (n = 54), SAF (n = 52), and XPS (n = 53). The preoperative pain scores were taken before the onset of treatment in the groups. After a single appointment for root canal treatment, the patients were asked to rate the level of their pain according to the Visual Analog Scale (VAS) of 100 mm at 6, 24, 48, and 72-hour post-treatment intervals. Ibuprofen was prescribed to be taken while experiencing pain; patients were requested to note the number of pills consumed at intervals after treatment. Results: The patients in SAF and XPS groups had lower mean VAS scores than the PTN group at 24-, 48-, and 72-hour intervals (p < 0.05). The most common analgesic intake was optimally seen in the PTN group at a 6-hour interval. All shaping procedures caused postoperative pain, whose intensity decreased with time. Conclusion: The SAF and XPS groups had a lesser intensity of pain as well as minimum analgesic intakes as compared to the PTN group. All instrumentation systems moderately caused pain, and the PTN group experienced the highest pain among others.

Nationwide Trends of Modern Endodontic Practices Related to Working Length, Instrumentation, Magnification, and Obturation: A Comparative Cross-Sectional Survey Comparing Endodontic and Non-Endodontic Specialties Practicing Root Canal Treatment in India.

Aim: The present study was designed to assess trends in contemporary endodontic practice regarding the techniques and materials used in endodontic therapy among dental practitioners from various regions of India. Methods: A cross-sectional questionnaire-based study was conducted amongst dentists who were pursuing postgraduates in endodontics (PG Endo) and other branches (PG-OB), specialists from other branches (MDS-OB) and specialists in endodontics (MDS-Endo) in various dental colleges representing East, West, North, South, and Central zones through an e-survey using Google forms. State-wise postgraduate dental college lists were obtained from the Dental Council of India (DCI) website. Using a multistage cluster random sampling method and considering the unanticipated response rate, emails were sent to 2100. A 29-item close-ended questionnaire, framed according to different aspects of endodontic treatment, was used to record the responses. Results: When the distribution of the groups of dentists was compared, the central zone had the highest number of PG-OB (44.2%) and the lowest number of MDS-Endo (8.4%). The electronic apex locator (EAL) method of working length determination has been reported less among MDS-Endo than MDS-OB. The difference between the usage of various methods for working length determination was significant among the different groups in all the zones. (p < 0.0001) Most MDS-Endo preferred the rotary method of instrumentation over the combination method for different zones. The majority of dental practitioners preferred a combination method of instrumentation. Conclusion: Zone-wise comparisons among dentists showed the majority of general dental practitioners preferred the combination method (radiographs and electronic apex locator) for working length determination. Most MDS-Endo preferred the rotary method of instrumentation over the combination method for different zones. All dental practitioners did not so commonly use magnification in all the zones. The single cone technique was the most opted by dental practitioners of all the zones.

Antibacterial Efficacy and Surface Characteristics of Boron Nitride Coated Dental Implant: An In-Vitro Study.

This in vitro study evaluated bacterial cell proliferation and biofilm adhesion on titanium discs with and without antibacterial surface treatment to reduce the chances of peri-implant infections. Hexagonal boron nitride with 99.5% purity was converted to hexagonal boron nitride nanosheets via the liquid phase exfoliation process. The spin coating method was used for uniform coating of h-BNNSs over titanium alloy (Ti6Al4V) discs. Two groups of titanium discs were formed: Group I (n = 10) BN-coated titanium discs and Group II (n = 10) uncoated titanium discs. Two bacterial strains, Streptococcus mutans (initial colonizers) and Fusobacterium nucleatum (secondary colonizers), were used. A zone of inhibition test, microbial colony forming units assay, and crystal violet staining assay were used to evaluate bacterial cell viability. Surface characteristics and antimicrobial efficacy were examined by scanning electron microscopy with energy dispersion X-ray spectroscopy. SPSS (Statistical Package for Social Sciences) version 21.0 was used to analyze the results. The data were analyzed for probability distribution using the Kolmogorov-Smirnov test, and a non-parametric test of significance was applied. An inter-group comparison was done using the Mann-Whitney U test. A statistically significant increase was observed in the bactericidal action of BN-coated discs compared to uncoated discs against S. mutans, but no statistically significant difference was found against F. nucleatum.

Roots and Root Canals Characterization of Permanent Mandibular Premolars Analyzed Using the Cone Beam and Micro Computed Tomography-A Systematic Review and Metanalysis.

This current paper aims to review the literature on the root canal configuration (RCC) and root structure of permanent mandibular premolars. To find the published scientific literature on the RCC of mandibular premolars up to July 2022, a systematic search of four electronic databases was performed. The studies were selected, rendering to a predetermined point of reference: "mandibular 2nd premolar", "root and canal system", "morphology of root and canal", "root and canal configuration", and "morphology", along with "anatomy" and "mandibular premolars". Cross-referencing along with screening through the bibliographies of the chosen articles resulted in the identification of further studies. In the current study, we examined 30 different articles, and we chose them based on the quality of research investigations. From 3471 retrieved studies, a total of 15981 mandibular 2nd premolars were observed in 30 studies. The mean JBI score for studies assessing the structure of the root, as well as the root canal of the mandibular 2nd premolar, was 7.78 ± 0.81. We have found a pooled prevalence of 91.82% for Vertucci class I root canal morphology and 78.63% pooled prevalence of single-rooted mandibular second premolar. A total of 8677 mandibular 1st premolars were observed in 22 studies. The mean JBI score for studies assessing the structure and anatomy of the root, as well as root canal of mandibular 1st premolar, was 7. 95 ± 0.85. We have found a pooled prevalence of 74.34% for Vertucci class I root canal morphology and 85.20% pooled prevalence of single-rooted mandibular 1st premolar. Mandibular first and second premolars were mostly single-rooted teeth (89.5-100%). The most frequently seen RCC is a 1-1-2-/2 (type V-Vertucci's), followed by 1-1-2-/1 (type IV- Vertucci's; type III-Weine's), and finally RCC 2-2-2-1 (type IV-Vertucci's; type III-Weine's). Presently, the imaging of CBCT is the most used research approach for studying Mn2Ps' structural characteristics.

Incidence of Post-Operative Pain following a Single-Visit Pulpectomy in Primary Molars Employing Adaptive, Rotary, and Manual Instrumentation: A Randomized Clinical Trial.

Background and Objectives. To differentiate the intensity of postoperative pain after primary molar pulpectomy employing manual instrumentation versus two single-file systems with different kinetics (the XP-Endo shaper file with adaptive instrumentation vs. the Kedo-SG blue file with continuous rotation instrumentation). Materials and Methods. This three-arm, single-blind, randomized clinical trial included assessing 75 healthy children between 4 to 9 years who required pulpectomy for primary molars (mandibular first and second). The three groups each had an equal number of children. Children in Group 1 had their teeth instrumented with the XP-endo Shaper, children in Group 2 had their teeth instrumented with the Kedo-SG Blue file, and children in Group 3 had their teeth instrumented manually using K-files. The degree of postoperative pain was measured using a four-point pain scale at 6-, 12-, 24-, 48-, and 72-h following therapy. Each participant's parent received five flashcards with four faces and a word characterizing each face. The data were analyzed using Kruskal-Wallis and chi-square tests. The level of significance was set to 5%. Results. During the follow-up period, there was a significant difference in postoperative pain intensity between the three groups. The XP-endo shaper was associated with considerably decreased post operative at the 6- and 12-h interval followed by Kedo-SG. The highest post-operative discomfort across the groups was related to the patients who underwent manual instrumentation. Conclusion. In comparison to rotary and manual instrumentation, postoperative pain severity was reduced with adaptive instrumentation.

Post-Operative Quality of Life after Single-Visit Root Canal Treatment Employing Three Different Instrumentation Techniques-An Institutional Randomized Clinical Trial.

Root canal treatment (RCT) eliminates damaged pulpal tissue and protects the tooth from recurrent microbial invasion. Post-endodontic pain (PEP) is a frequently encountered complication of root canal therapy. It can have an impact on patients' quality of life (QoL) and their subjective perception of treatment options. Thus, a self-assessment questionnaire was used to evaluate and compare the influence of manual, rotary, and reciprocating file shaping procedures on immediate post-operative quality of life (POQoL) involving single-visit root canal therapy. It was a double-blinded, randomized, controlled clinical trial. A total of 120 participants were randomly assigned sequentially to three groups comprising 40 patients in each group: Group A: Hand K file (positive control); Group B: ProTaper Next file system; and Group C: WaveOne Gold. Post-operative pain was evaluated using a 4-point visual analog scale (VAS) after 12 h, 24 h, 48 h, 72 h, and 1 week. The highest post-operative pain was with manual instrumentation using hand K files, and the lowest was with reciprocating and rotating instrumentations. No significant difference was noted between the parameters of quality of life assessed, suggesting the filing system or technique had a similar effect.

Severity of Post-Operative Pain after Instrumentation of Root Canals by XP-Endo and SAF Full Sequences Compared to Manual Instrumentation: A Randomized Clinical Trial.

This investigation aimed to examine the post-operative pain experienced following single-visit root canal treatment using the XP-endo shaper sequence (XPS), full-sequence self-adjusting file (SAF), and manual K-files (HKF). A randomized equivalence parallel design, double-blinded clinical study was conducted on 120 patients with symptomatic irreversible pulpitis, with or without clinical signs of apical periodontitis. Only teeth with fully formed roots and no periapical lesions were incorporated in the study. Patients were apportioned to one of three groups (n = 40) randomly: Group 1-XPS, Group 2-SAF, and Group 3-HKF. Pre- and post-instrumentation pain was rated utilizing Visual Analog Scale (VAS) with a spectrum of 0-100 mm. The descriptive statistics and one-way ANOVA with 95% confidence intervals were used for statistical analysis. The mean VAS scores before instrumentation were consistent in all three groups. At 6, 24, 48, and 72 h, patients with root canals instrumented by SAF had the lowest post-instrumentation mean VAS score, followed by XPS. For all time intervals, the patients in the HKF group had the highest VAS score. The full-sequence SAF instrumentation resulted in less post-operative pain than the XP-endo plus protocol, while manual instrumentation with K-files resulted in the highest post-operative pain.

Apprehensions and Optimism among Dental Professionals during the COVID-19 Pandemic-A Nationwide Cross-Sectional Evaluation.

Globally, the pandemic of the coronavirus disease, which started in Wuhan, China, has become a major issue for public health. The COVID-19 epidemic notably causes health professionals to experience significantly more emotional stress than the general populace. The present study proposes to investigate the fear aspect in dentists in the initiation of clinical practice during these times. An online cross-sectional study was conducted among dental practitioners based on a pre-validated questionnaire. The data were expressed as frequency and percentage analyzed using the chi-square test using SPSS version 25. The data was obtained from 271 participants, where clinical practice after the first wave was mostly by freelancers (p-value = 0.01); most of whom were married (p-value = 0.065); 19.1% attached to institutes did not have changes in earnings; 28.1% of private practitioners had less than 10% reduction in cases. A total of 62% of private practitioners are concerned about the vaccine's preventative effects (p-value = 0.026), and 57% of private practitioners worry about being sued for the delay in treatment (p-value = 0.036). Only 33.1% of employees in institutions worry that becoming sick could endanger their family. As dentists continue to work their way through this pandemic, these pressures only occasionally have an impact on them. According to the researchers, this is the first study that has captured the anxiety and apprehensions that dental practitioners experienced during the height of the COVID-19 outbreak in India in April 2021. The study's findings demonstrate that the study population was generally upbeat and confident that they could quickly overcome their fear.

Location angle of second mesio-buccal canal in maxillary molars of an Indian population: an in vivo retrospective CBCT evaluation and proposal of a new classification.

Background: The current investigation was designed for predicting the location angle of second mesio-buccal root canal in permanent maxillary (first and second) molars with the aid of proposed measuring points and line using cone beam computed tomography in an Indian population. Methods: Three-hundred and twenty-four scans of permanent maxillary (first (n = 162) and second (n = 162)) molars with mesio-buccal 2 root canals and unassociated to the current evaluation were acquired. The maxillary molars were viewed with CSI imaging software. The images were captured and were further assessed using 3D Slicer. The assessment included of measuring the distance between the main mesio-buccal and mesio-buccal 2 canal and the angle at which the MB2 it is located utilizing proposed lines joining the disto-buccal and palatal canals. The data was tabulated for the incidence of various angles where the MB2 is located and MB-MB2 distance was determined. The angles denoted were either positive; I (0.1° to 1.9°), II (2° to 4°), III (>4°) or negative I (-0.1° to -1.9°), II (-2° to -4°), III (>-4°). On the data tabulated a new Banga Vhorkate and Pawar's (BVP's) angular classification for maxillary molars was proposed. Results: The existence of positive angle III was found in 41.35% of maxillary first molars (36 right and 31 left of 162), whereas positive angle II appeared in 41.98% of maxillary second molars (32 right and 36 left of 162). The MB1-MB2 in maxillary 1st molar is seen to be 3.12-3.31 mm and this distance in maxillary 2nd molar is 2.8-3.1 mm. The disto-buccal to palatal canal orifice mean distance was 5.06-5.22 mm in maxillary first molars and 4.9-5.8 mm in maxillary second molars. Conclusion: Accurate diagnosis of the location of second mesio-buccal canal increases the success rate of endodontic treatment and a better prognosis. The new proposed classification may be considerably helpful in the urge to locate the mesio-buccal 2 canal.

Evaluation of Root Anatomy and Canal Configuration of Human Permanent Maxillary First Molar Using Cone-Beam Computed Tomography: A Systematic Review.

The aim of this paper is to review the literature on root canal configuration (RCC) and the frequency of occurrence of a second mesiobuccal canal (MB) in human permanent maxillary first molars where cone-beam computed tomography (CBCT) is used. Online electronic databases such as PubMed-Medline, Embase, Scopus and Cochrane Library were searched using appropriate keywords from the earliest available date until 12th June 2022, without restriction on language. In the mesiobuccal root, type I was the most frequent (33.29%), followed by types II and IV (27.18% and 26.36%, respectively). Moreover, 68.2% of maxillary first molars had a second MB canal. For both the distobuccal and palatal roots, type I was the most prevalent, with 99.08% and 97.83% occurrence, respectively. All other types were infrequent. Type I RCC is most frequent in all the roots of the maxillary first molars. Hence, care must be taken during biomechanical preparation of the MB roots.