Gene identification, expression analysis, and molecular docking of SAT and OASTL in the metabolic pathway of selenium in Cardamine hupingshanensis.

KEY MESSAGE: Identification of selenium stress-responsive expression and molecular docking of serine acetyltransferase (SAT) and O-acetyl serine (thiol) lyase (OASTL) in Cardamine hupingshanensis. A complex coupled with serine acetyltransferase (SAT) and O-acetyl serine (thiol) lyase (OASTL) is the key enzyme that catalyzes selenocysteine (Sec) synthesis in plants. The functions of SAT and OASTL genes were identified in some plants, but it is still unclear whether SAT and OASTL are involved in the selenium metabolic pathway in Cardamine hupingshanensis. In this study, genome-wide identification and comparative analysis of ChSATs and ChOASTLs were performed. The eight ChSAT genes were divided into three branches, and the thirteen ChOASTL genes were divided into four branches by phylogenetic analysis and sequence alignment, indicating the evolutionary conservation of the gene structure and its association with other plant species. qRT-PCR analysis showed that the ChSAT and ChOASTL genes were differentially expressed in different tissues under various selenium levels, suggesting their important roles in Sec synthesis. The ChSAT1;2 and ChOASTLA1;2 were silenced by the VIGS system to investigate their involvement in selenium metabolites in C. hupingshanensis. The findings contribute to understanding the gene functions of ChSATs and ChOASTLs in the selenium stress and provide a reference for further exploration of the selenium metabolic pathway in plants.

Accurate Finite Element Simulations of Dynamic Behaviour: Constitutive Models and Analysis with Deep Learning.

Owing to the challenge of capturing the dynamic behaviour of metal experimentally, high-precision numerical simulations have become essential for analysing dynamic characteristics. In this study, calculation accuracy was improved by analysing the impact of constitutive models using the finite element (FE) model, and the deep learning (DL) model was employed for result analysis. The results showed that FE simulations with these models effectively capture the elastic-plastic response, and the ZA model exhibits the highest accuracy, with a 26.0% accuracy improvement compared with other models at 502 m/s for Hugoniot elastic limit (HEL) stress. The different constitutive models offer diverse descriptions of stress during the elastic-plastic response because of temperature effects. Concurrently, the parameters related to the yield strength at quasi-static influence the propagation speed of elastic waves. Calculation show that the yield strength at quasi-static of 6061 Al adheres to y = ax + b for HEL stress. The R-squared (R2) and mean absolute error (MAE) values of the DL model for HEL stress predictions are 0.998 and 0.0062, respectively. This research provides a reference for selecting constitutive models for simulation under the same conditions.

Synergy of Spall Strength and Toughness in Nanograined Metals.

Under shock loading, the spall strength of nanocrystals exhibits intricate grain-size effects due to the presence of abundant grain boundary and dislocation activities. However, the influence of size on spall toughness and void evolution has been largely overlooked. This study employs molecular dynamics simulations to investigate the damage accumulation characteristics of nanocrystalline aluminum across various grain sizes. Unlike the trade-off observed in quasi-static loading conditions, our study reveals a consistency in which grain size governs both nanovoid nucleation and coalescence, yielding a novel spall strength-toughness synergy. These insights highlight grain sizes that are particularly susceptible to spall fracture, offering a crucial understanding of nanocrystal failure mechanisms in extreme environments.

Nomogram for predicting the risk of nonalcoholic fatty liver disease in older adults in Qingdao, China: A cross-sectional study.

BACKGROUND AND OBJECTIVES: To explore the risk factors for non-alcoholic fatty liver disease (NAFLD) and to establish a non-invasive tool for the screening of NAFLD in an older adult population. METHODS AND STUDY DESIGN: A total of 131,161 participants were included in this cross-sectional study. Participants were randomly divided into training and validation sets (7:3). The least absolute shrinkage and selection operator method was used to screen risk factors. Multivariate logistic regression was employed to develop a nomogram, which was made available online. Receiver operating characteristic curve analysis, calibration plots, and decision curve analysis were used to validate the discrimination, calibration, and clinical practicability of the nomogram. Sex and age subgroup analyses were conducted to further validate the reliability of the model. RESULTS: Nine variables were identified for inclusion in the nomogram (age, sex, waist circumference, body mass index, exercise frequency, systolic blood pressure, fasting plasma glucose, alanine aminotransferase, and low-density lipoprotein cholesterol). The area under the receiver operating characteristic curve values were 0.793 and 0.790 for the training set and the validation set, respectively. The calibration plots and decision curve analyses showed good calibration and clinical utility. Subgroup analyses demonstrated consistent discriminatory ability in different sex and age subgroups. CONCLUSIONS: This study established and validated a new nomogram model for evaluating the risk of NAFLD among older adults. The nomogram had good discriminatory performance and is a non-invasive and convenient tool for the screening of NAFLD in older adults.

Whole genome identification, molecular docking and expression analysis of enzymes involved in the selenomethionine cycle in Cardamine hupingshanensis.

BACKGROUND: The selenomethionine cycle (SeMTC) is a crucial pathway for the metabolism of selenium. The basic bioinformatics and functions of four enzymes involved in the cycle including S-adenosyl-methionine synthase (MAT), SAM-dependent methyltransferase (MTase), S-adenosyl-homocysteine hydrolase (SAHH) and methionine synthase (MTR), have been extensively reported in many eukaryotes. The identification and functional analyses of SeMTC genes/proteins in Cardamine hupingshanensis and their response to selenium stress have not yet been reported. RESULTS: In this study, 45 genes involved in SeMTC were identified in the C. hupingshanensis genome. Phylogenetic analysis showed that seven genes from ChMAT were clustered into four branches, twenty-seven genes from ChCOMT were clustered into two branches, four genes from ChSAHH were clustered into two branches, and seven genes from ChMTR were clustered into three branches. These genes were resided on 16 chromosomes. Gene structure and homologous protein modeling analysis illustrated that proteins in the same family are relatively conserved and have similar functions. Molecular docking showed that the affinity of SeMTC enzymes for selenium metabolites was higher than that for sulfur metabolites. The key active site residues identified for ChMAT were Ala269 and Lys273, while Leu221/231 and Gly207/249 were determined as the crucial residues for ChCOMT. For ChSAHH, the essential active site residues were found to be Asn87, Asp139 and Thr206/207/208/325. Ile204, Ser111/329/377, Asp70/206/254, and His329/332/380 were identified as the critical active site residues for ChMTR. In addition, the results of the expression levels of four enzymes under selenium stress revealed that ChMAT3-1 genes were upregulated approximately 18-fold, ChCOMT9-1 was upregulated approximately 38.7-fold, ChSAHH1-2 was upregulated approximately 11.6-fold, and ChMTR3-2 genes were upregulated approximately 28-fold. These verified that SeMTC enzymes were involved in response to selenium stress to varying degrees. CONCLUSIONS: The results of this research are instrumental for further functional investigation of SeMTC in C. hupingshanensis. This also lays a solid foundation for deeper investigations into the physiological and biochemical mechanisms underlying selenium metabolism in plants.

Zirconia Toughened Alumina Ceramics via Forming Intragranular Structure.

The distribution of second phase particles in the microstructure of composite ceramics affects the mechanical properties, and the intragranular structures often result in better properties compared to the intergranular structures. However, it is difficult to obtain composite ceramics with intragranular structure by conventional route. To produce composite ceramics with an intragranular structure in a simpler route. In this work, starting powders with different phase compositions were obtained by the co-precipitation method, and zirconia toughened alumina (ZTA) composite ceramics were prepared with these starting powders by spark plasma sintering (SPS). The results show that it is easier to fabricate ZTA composite ceramics with an intragranular structure by using composite powders containing amorphous or transition phase Al2O3 as starting materials. The phase composition of the powder prepared by the co-precipitation method after calcination at 1100 °C is θ-Al2O3 and t-ZrO2, and the average grain size after sintering at 1500 °C is 1.04 ± 0.28 µm, and the maximum Vickers hardness and fracture toughness of the specimens reach 19.37 ± 0.43 GPa and 6.18 ± 0.06 MPa·m1/2, respectively. The ZrO2 particles were the core of crystallization and grow together with the Al2O3 matrix, forming the intragranular structure of ZTA ceramics. This work may provide a new idea for preparing composite ceramics with intragranular structure.

ALKBH5 is a prognostic factor and promotes the angiogenesis of glioblastoma.

Despite numerous reports indicating the significant impact of RNA modification on malignant glioblastoma (GBM) cell behaviors such as proliferation, invasion and therapy efficacy, its specific involvement in glioblastoma (GBM) angiogenesis is remains unclear and is currently under investigation. In this study, we aimed to investigate the relevance between RNA modification regulators and GBM angiogenesis. Our study employed bioinformatic analyses, including Gene Set Enrichment Analysis (GSEA), differential expression analysis, and Kaplan-Meier survival analysis, to identify regulators of angiogenesis-associated RNA modification (RM). Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis were applied to identify the enrichment of angiogenesis associated signatures in ALKBH5-high expression GBMs. We also utilized Western blot to verify the upregulation of ALKBH5 in clinical GBM samples. By a series of in vitro and in vivo assays, including plasmid transfection, wound healing, transwell invasion test, tube formation, RT-qPCR, ELISA assays and xenograft mice model, we validated the angiogenesis regulation ability of ALKBH5 in GBM. The N6-methyladenosine (m6A) modification "erase" ALKBH5 emerged as a candidate regulator associated with angiogenesis, demonstrating elevated expression and robust prognostic predictive ability in GBM patients. We also revealed enrichment of vasculature development biological process in GBMs with high ALKBH5 expression. Subsequently, we validated the elevated the expression of ALKBH5 in clinical GBM and paired adjacent tissues through western blot. Additionally, we knocked down the expression of ALKBH5 using sh-RNAs in U87 GBM cells to access the angiogenesis induction ability in U87 cells. In vitro experiments, Human Umbilical Vein Endothelial Cells (HUVECs) were used to perform wound healing, transwell migration and tube formation analysis, results indicated that ALKBH5 knock-down of U87 cells could decrease the pro-angiogenesis ability of U87 GBM cells. Further validation of our bioinformatic findings confirmed that ALKBH5 knockdown impaired VEGFA secretion in both in vitro and in vivo settings in U87 cells. These results comprehensively affirm the crucial role of ALKBH5 in regulating GBM-induced angiogenesis, both in vitro and in vivo. ALKBH5 not only emerges as a promising prognostic factor for GBM patients, but also plays a pivotal role in sustaining GBM progression by promoting angiogenesis.

Synthesis of NiFe-layered double hydroxides using triethanolamine-complexed precursors as oxygen evolution reaction catalysts: effects of Fe valence.

The synthesis of highly efficient NiFe-layered double hydroxides (NiFe-LDHs) to catalyze the oxygen evolution reaction (OER) is urgent and challenging. Herein, NiFe-FeCl3-x and NiFe-FeCl2-x samples (where FeCl3 and FeCl2 represent the Fe sources and x represents the imposed reaction time: 6, 12, and 24 h) were prepared via one-pot hydrothermal synthesis using Fe sources characterized by Fe(III) or Fe(II) valence states. In the presence of triethanolamine, when FeCl3 was used as the Fe source, pure NiFe-LDH was obtained, whose crystallinity increased with increasing hydrothermal treatment time. In contrast, when FeCl2 was used as the Fe source, a mixture of NiFe-LDH, Fe2O3, and trace amounts of Fe3O4 was obtained. The content of NiFe-LDH in the mixture increased under longer hydrothermal treatment and NiFe-FeCl3-x catalysts exhibited better OER performance than NiFe-FeCl2-x catalysts. Specifically, NiFe-FeCl3-6 afforded the highest OER performance with an overpotential of 246.8 mV at 10 mA cm-2 and a Tafel slope of 46.1 mV dec-1. Herein, we investigated the effects of the valence state of Fe precursors on the structures and OER activities of the prepared catalysts; the mechanism of NiFe-LDH formation via hydrothermal synthesis in the presence of triethanolamine was also proposed.

Dual Pd-Acid Sites Confined in a Hierarchical Core-Shell Structure for Hydrogenation of Nitrobenzene.

A core-shell structured Pd@TS-1@meso-SiO2 catalyst with confined Pd nanometals has been fabricated by one-pot synthesis, impregnation method and sol-gel method. With the promotion of acid sites and protection of mesoporous silica shell, Pd@TS-1@meso-SiO2 shows higher activity than commercial comparison and higher stability than sample without mesoporous silica shell in the hydrogenation of nitrobenzene. The schematic illustration of the synergy effect is also proposed.

The controllable synthesis of NiO/Ni/C nanosheets via pulsed plasma in ethylene glycol solution for oxygen evolution electrocatalysis.

NiO-based composites exhibit high catalytic activity for the oxygen evolution reaction (OER). Herein, high-performance NiO/Ni/C nanosheet catalysts were obtained by liquid-phase pulsed plasma (LPP), which was generated between two nickel electrodes in ethylene glycol (EG) solution by a homemade high-voltage pulse power supply. Melted nickel nanodrops were ejected from nickel electrodes which were bombarded by the energetic plasma. Simultaneously, high-temperature nickel nanodrops promoted the decomposition of the organics which were converted in the EG solution by the catalysis of LPP and formed hierarchical porous carbon nanosheets. Due to the high surface energy of the hierarchical porous carbon nanosheets, the spherical particles of Ni/NiO were adsorbed on the surface to compose the NiO/Ni/C composites. The pore size distribution of the composites could be controlled with different EG concentrations. When the EG concentration was 10 vol% (EG30), the composites possessed a H2 + H2 + H3 type pore size distribution and maximum active site area, leading to an exceptional OER activity (289.2 mV overpotential at 10 mA cm-2).

Atomic Interface Engineering of Single-Atom Pt/TiO2 -Ti3 C2 for Boosting Photocatalytic CO2 Reduction.

Solar-driven CO2 conversion into valuable fuels is a promising strategy to alleviate the energy and environmental issues. However, inefficient charge separation and transfer greatly limits the photocatalytic CO2 reduction efficiency. Herein, single-atom Pt anchored on 3D hierarchical TiO2 -Ti3 C2 with atomic-scale interface engineering is successfully synthesized through an in situ transformation and photoreduction method. The in situ growth of TiO2 on Ti3 C2 nanosheets can not only provide interfacial driving force for the charge transport, but also create an atomic-level charge transfer channel for directional electron migration. Moreover, the single-atom Pt anchored on TiO2 or Ti3 C2 can effectively capture the photogenerated electrons through the atomic interfacial PtO bond with shortened charge migration distance, and simultaneously serve as active sites for CO2 adsorption and activation. Benefiting from the synergistic effect of the atomic interface engineering of single-atom Pt and interfacial TiOTi, the optimized photocatalyst exhibits excellent CO2 -to-CO conversion activity of 20.5 µmol g-1  h-1 with a selectivity of 96%, which is five times that of commercial TiO2 (P25). This work sheds new light on designing ideal atomic-scale interface and single-atom catalysts for efficient solar fuel conversation.

Influence on Elastic Wave Propagation Behavior in Polymers Composites: An Analysis of Inflection Phenomena.

Particulate polymer composites (PPCs) are widely applied under different elastic wave loading conditions in the automobile, aviation, and armor protection industries. This study investigates the elastic wave propagation behavior of a typical PPC, specifically a Cu/poly (methyl methacrylate) (PMMA) composite, with a wide range of particle contents (30-65 vol. %) and particle sizes (1-100 µm). The results demonstrate an inflection phenomenon in both the elastic wave velocity and attenuation coefficient with increasing volume content. In addition, the inflection point moves to the direction of low content with the increase in particle size. Notably, the elastic wave velocity, attenuation, and wavefront width significantly increased with the particle size. The inflection phenomenon of elastic wave propagation behavior in PPCs is demonstrated to have resulted from particle interaction using the classical scattering theory and finite element analysis. The particle interaction initially intensified and then reduced with increasing particle content. This study elucidates the underlying mechanism governing the elastic wave propagation behavior of high particle content PPCs and provides guidelines for the design and application of wave-absorbing composites.

Experiment and simulation for ultrasonic wave propagation in multiple-particle reinforced composites.

The study of ultrasonic wave propagation is a crucial foundation for the application of ultrasonic testing in particle-reinforced composites. However, in the presence of the complex interaction among multiple particles, the wave characteristics are difficult to be analyzed and used for parametric inversion. Here we combine the finite element analysis and experimental measurement to investigate the ultrasonic wave propagation in Cu-W/SiC particle-reinforced composites. The experimental and simulation results are in good agreement and quantitatively correlate longitudinal wave velocity and attenuation coefficient with SiC content and ultrasonic frequency. The results show that the attenuation coefficient of ternary composites (Cu-W/SiC) is significantly larger than that of binary composites (Cu-W, Cu-SiC). This is explained by numerical simulation analysis via extracting the individual attenuation components and visualizing the interaction among multiple particles in a model of energy propagation. The interaction among particles competes with the particle independent scattering in particle-reinforced composites. SiC particles serve as energy transfer channels partially compensating for the loss of scattering attenuation caused by interaction among W particles, which further blocks the transmission of incident energy. The present work provides insight into the theoretical basis for ultrasonic testing in multiple-particle reinforced composites.

Hydrodynamic simulation of hypervelocity generation by multidimensional graded impactors: Planarity enhancement study.

Hypervelocity impact in the universe can be generated by a three-stage gas gun. Achieving the desirable planarity of the flyer enlarges the experimentally effective area of the flyer under the hypervelocity condition. The multidimensional graded density impactor (MDGDI) enhances the planarity of the flyer. In this investigation, a one-dimensional Lagrange elastoplastic hydrodynamic method and a Euler grid finite difference method were used to examine the relationship between the structure of graded density impactors (GDIs) and the planarity of flyers. MDGDIs lead to a deviation of the stress wave produced by the one-dimensional graded density impactor (1DGDI), which offsets the stress disturbance effect, changes the velocity at each particle, and enhances the planarity of flyers. The proportion of flat areas of the flyer increases from 52.70% to 95.71% by adopting MDGDIs. The proportion of flat areas is linear with the wave impedance of the high-impedance layer for 1DGDIs and the wave impedance near the barrel of the high-impedance layer for MDGDIs. This investigation guides the design of GDIs and expands the application of gas gun technology in the field of hypervelocity impact.

Simulation of Layer Thickness Measurement in Thin Multi-Layered Material by Variable-Focus Laser Ultrasonic Testing.

Thin multi-layered materials are widely used in key structures of many high technology industries. To ensure the quality and safety of structures, layer thickness measurement by non-destructive testing (NDT) techniques is essential. In this paper, a novel approach for the measurement of each layer's thickness in thin multi-layered material is proposed by using ring-shaped laser generated focused ultrasonic bulk waves. The proposed method uses a ring-shaped laser with a variable radius to generate shear waves with variable focus inside the structure. By analyzing the signal characteristics at the ring center when the laser radius varies from zero to maximum, the direct measurement of layer thickness can be realized, considering that only when the focal depth and the layer thickness satisfy the specific relationship, the reflected shear waves converge and form a peak at the ring center. This straightforward approach can increase the pulse-echo SNR and prevent the processing of aliasing signals, and therefore provides higher efficiency and accuracy for the layer thickness measurement. In order to investigate the feasibility of this method, finite element simulations were conducted to simulate the ring-shaped laser generated ultrasonic waves in multi-layered structure in detail. Following the principle of the proposed method, the layer thickness of a bi-layer and 3-layer structure were respectively measured using simulation data. The results confirm that the proposed method can accurately and efficiently measure the layer thickness of thin multi-layered material.

Triethanolamine-assisted synthesis of NiFe layered double hydroxide ultrathin nanosheets for efficient oxygen evolution reaction.

Water electrolysis is a promising technique for producing high-quality hydrogen, the application of which is impeded by the sluggish oxygen evolution reaction (OER) process. In this study, ultrathin nickel-iron layered double hydroxide (NiFe LDH) nanosheets were successfully synthesized through a facile hydrothermal reaction with the assistance of triethanolamine (TEA). Morphological and structural characterizations revealed that the presence of TEA modified the morphology of NiFe LDH, facilitated the synthesis of high-purity NiFe LDH, improved the crystallinity of NiFe LDH and resulted in a slight decrease in specific surface area. X-ray photoelectron spectroscopy (XPS) analysis demonstrated the modulation of the electronic structure engendered by the addition of TEA, with nickel and iron appearing in high valence state in the resulting NiFe LDH nanosheets. The as-prepared NiFe LDH nanosheets possessed outstanding OER activity with fast kinetics, exhibiting a low overpotential of 261 mV to achieve a current density of 10 mA cm-2 and a small Tafel slope of 32.5 mV dec-1 in 1 M KOH. The excellent OER performance and rapid OER kinetics are mainly attributed to the high-valence Ni and Fe rather than the modification in the morphology and microstructure.

Shear-Thickening Covalent Adaptive Networks for Bifunctional Impact-Protective and Post-Tunable Tactile Sensors.

Shear-thickening materials have been widely applied in fields related to smart impact protection due to their ability to absorb large amounts of energy during sudden shock. Shear-thickening materials with multifunctional properties are expanding their applications in wearable electronics, where tactile sensors require interconnected networks. However, current bifunctional shear-thickening cross-linked polymer materials depend on supramolecular networks or slightly dynamic covalently cross-linked networks, which usually exhibit lower energy-absorption density than the highly dynamic covalently cross-linked networks. Herein, we employed boric ester-based covalent adaptive networks (CANs) to elucidate the shear-thickening property and the mechanism of energy dissipation during sudden shock. Guided by the enhanced energy-absorption capability of double networks and the requirements of the conductive networks for the wearable tactile sensors, tungsten powders (W) were incorporated into the boric ester polymer matrix to form a second network. The W networks make the materials stiffer, with a 13-fold increase in Young's modulus. Additionally, the energy-absorption capacity increased nearly 7 times. Finally, we applied these excellent energy-absorbing and conductive materials to bifunctional shock-protective and strain rate-dependent tactile sensors. Considering the self-healable and recyclable properties, we believe that these anti-impact and tactile sensing materials will be of great interest in wearable devices, smart impact-protective systems, post-tunable materials, etc.

CD147 Protein Expression and Temozolomide Resistance in Glioma Cells: An Ex vivo and In vivo Study.

It has been noted that temozolomide resistance occurs in a number of malignancies, including glioma, although the underlying cause of this is unknown. The goal of the study in vivo investigation to show that increased CD147 expression in glioma cells is a factor in their resistance to the chemotherapy drug temozolomide. Proliferation assays, TUNEL assays, reactive oxygen species assays, protein degradation assays, immunohistochemistry, Western blotting, quantitative polymerase chain reactions, and tumorigenicity assays were all carried out. Using the human protein atlas databases, the expression levels of CD147 in different kinds of malignancies were examined. For immunohistochemistry, a total of 7, 12, 19, 15, and 16 glioma samples were taken from para-carcinoma tissue, representing stage I, stage II, stage III, and stage IV gliomas, respectively. The expression of CD147 proteins is correlated with the tumor's aggressiveness. Cell development was slowed by suppressing the expression of the CD147 protein. The expression of the CD147 protein contributed to the emergence of temozolomide resistance. Expression of the CD147 protein reduced mRNA expression. The growth-inhibitory impact of temozolomide on glioma cells was enhanced by the suppression of CD147 protein.  Nuclear factor E2-related factor 2 expression and CD147 protein expression showed a significant reciprocal connection with each other (p 0.0001, r2 = 0.3254). In glioma, resistance to temozolomide is due to overexpression of CD147 protein and induction of nuclear factor E2-related factor 2.

Relationship between dietary patterns and prediabetes, undiagnosed or diagnosed diabetes mellitus among adults in Qingdao: A cross-sectional study.

BACKGROUND AND OBJECTIVES: To identify the main dietary patterns of adults and investigate the cross-sectional associations of these dietary patterns with prediabetes and undiagnosed or diagnosed diabetes mellitus (DM) in Qingdao, China. METHODS AND STUDY DESIGN: This study included 4,457 participants who were administered the semi-quantitative food frequency questionnaire (FFQ). Dietary patterns were identified through principal component analysis (PCA). Logistic regression analysis was performed to determine the associations of each pattern with the risks of prediabetes and undiagnosed or diagnosed DM. RESULTS: PCA revealed two major dietary patterns. The Fruits-Vegetables and Poultry-Seafood patterns were not significantly associated with the risk of prediabetes in either crude or adjusted models (all p>0.05). The highest quartile of the Fruits-Vegetables pattern was significantly associated with decreased risks of undiagnosed DM (crude: OR=0.55, 95% CI: 0.41-0.72; Model 1: OR=0.61, 95% CI: 0.46-0.81; Model 2: OR=0.57, 95% CI: 0.42-0.77; Model 3: OR=0.56, 95% CI: 0.41-0.76) and diagnosed DM (crude: OR=0.51, 95% Cl: 0.34-0.75; Model 1: OR=0.59, 95% CI: 0.39-0.88; Model 2: OR=0.60, 95% CI: 0.39-0.93; Model 3: OR=0.59, 95% CI: 0.38-0.91) compared with the lowest quartile in crude and adjusted models. The Poultry-Seafood pattern was not significantly associated with the risk of undiagnosed or diagnosed DM in crude or adjusted models (all p>0.05). CONCLUSIONS: The Fruits-Vegetables pattern was associated with a decreased risk of undiagnosed or diagnosed DM.

Alkyl group-decorated g-C3N4 for enhanced gas-phase CO2 photoreduction.

With excellent physical/chemical stability and feasible synthesis, g-C3N4 has attracted much attention in the field of photocatalysis. However, its weak photoactivity limits its practical applications. Herein, by easily planting hydrophobic alkyl groups onto g-C3N4, the hydrophilicity of g-C3N4 can be well regulated and its specific surface area be enlarged simultaneously. Such a modification ensures enhanced CO2 capture and increased active sites. In addition, the introduction of alkyl groups endows g-C3N4 with abundant charge density and efficient separation of photoinduced excitons. All these advantages synergistically contribute to the enhanced photocatalytic CO2 reduction performance over the optimized catalyst (DCN90), and the total CO2 conversion is 7.4-fold that of pristine g-C3N4 (CN).