Radiographic evaluation of robot-assisted versus manual total hip arthroplasty: a multicenter randomized controlled trial.

BACKGROUND: The effectiveness of robot-assisted surgery remains contentious due to the lack of high-quality randomized controlled trials (RCTs) to elevate the level of evidence. We aimed to evaluate the postoperative radiographic outcomes of robot-assisted (RAS-THA) versus manual (M-THA) total hip arthroplasty. METHODS: This multicenter RCT was performed from March 1, 2021 to December 1, 2021. Patients were randomly assigned to routine M-THA or to RAS-THA that used the TRex-RS orthopedic joint surgical navigation system. The primary outcome was to compare the acetabular component orientation, femoral stem alignment, femoral canal fill ratio, and leg length discrepancy between RAS-THA and M-THA using postoperative radiography. Subgroup analyses of the two groups stratified by surgical approach, gender, and BMI were also conducted. RESULTS: Seventy-three participants were randomly allocated to the RAS-THA group, while seventy-two participants were assigned to the M-THA group. Compared to the M-THA group, the RAS-THA group exhibited less variability in the preoperative planning of the vertical center of rotation (VCOR; P < 0.001), demonstrated a significant advantage in femoral stem alignment (P = 0.004), and showed pronounced decreases in inequality and in the variability in leg length discrepancy (P < 0.001). There was no significant difference in the Lewinnek safe-zone ratio (P = 0.081) and the femoral canal fill ratio (P > 0.05) between the two groups. Further subgroup analysis also showed that the RAS-THA group had fewer horizontal center of rotation (HCOR) and leg length differences when stratified by surgical approach, gender, and overweight status. CONCLUSION: This RCT found that, regardless of the surgical approach, gender, or body mass index, RAS-THA can effectively improve the postoperative VCOR and significantly reduce the variability of leg length difference. RAS-THA should be considered an effective method to enhance surgical precision by achieving less variability in challenging patients with leg length discrepancies. TRIAL REGISTRATION: ChiCTR2100044124.

Outcomes of a Double-Cup Construct to Treat Paprosky 3A and 3B Acetabular Defects at a Mean of 39 Months.

BACKGROUND: Modular reconstruction systems based on porous tantalum (PT) prosthetic components have been increasingly used for the treatment of complex acetabular bone defects in revision total hip arthroplasty. We report a novel technique that applies a revision cup as a "super-augment" to form a "double-cup" construct for Paprosky type III defects. METHODS: A retrospective review was conducted on revision total hip arthroplasty cases, comparing those treated with double-cup constructs (DC group, n = 48) to those treated with PT shells and augments (PT group, n = 48). All procedures were performed at the same institute between 2017 and 2022. Clinical outcome evaluation utilized the Harris Hip Score, Oxford Hip Score, and the 36-Item Short Form Survey. Preoperative and postoperative radiographic assessments measured hip center of rotation (COR) position and leg length discrepancy. Additionally, postoperative complications and implant survivorship were monitored during the follow-up period. RESULTS: The clinical outcomes improved substantially in both groups, which showed no significant difference in the Harris Hip Score (P = .786), the Oxford Hip Score (P = .570), and the 36-Item Short Form Survey (P = .691). Compared to the PT group, the reconstruction COR was significantly closer to the anatomic COR (vertical distance: 2.630 versus 7.355 mm, P = .0034; horizontal distance: 1.881 versus -6.413 mm, P < .0001) in Paprosky 3B type defects. Additionally, postoperative leg length discrepancy was less in the DC group (-8.252 versus -1.821 mm, P = .0008). Dislocation was the main complication in the DC group, and only 1 patient received re-revision due to repeated dislocation. The cumulative survival rate of the DC group (100%; 95% confidence interval 100) was better than the PT group (83.4%; 95% confidence interval 70.5 to 98.6) when re-revisions for aseptic loosening were the endpoint (P = .046). CONCLUSIONS: The DC is a reliable revision technique for the reconstruction of Paprosky type III bone defects. Although dislocation remains challenging, the biomechanically superior restoration achieved by this technique lowers the risk of aseptic loosening.

Effects of Clipping an Invasive Plant Species on the Growth of Planted Plants of Two Co-Occurring Species in a Greenhouse Study.

The restoration of native plants in invaded habitats is constrained with the presence of highly competitive exotic species. Aboveground removal, such as clipping or mowing, of invasive plants is required for successful restoration. The effects of clipping an invasive plant species, Solidago canadensis, grown at five densities (1-5 plants per pot), and planting two co-occurring and competitive species, Sesbania cannabina and Imperata cylindrica, on the growth of both the invasive species and the co-occurring species were investigated in a greenhouse experiment. The established S. canadensis suppressed the growth of planted seedlings with 47.8-94.4% reduction in biomass, with stronger effects at higher densities; clipping significantly reduced 97.5-97.4% of biomass of S. canadensis and ameliorated the suppression effects (with only 8.7-52.7% reduction in biomass of the co-occurring plants), irrespective of density. Both the aboveground and belowground part of S. canadensis contributed to its suppression effects on planted co-occurring species. Seed sowing of co-occurring species reduced the belowground growth, but not the underground growth of S. canadensis. S. cannabina appeared to be more effective at reducing the growth of S. canadensis than I. cylindrica. Therefore, clipping together with planting competitive species that can overcome the belowground priority effects of S. canadensis could be a promising strategy for controlling S. canadensis invasion and restoring native plant communities.

An injectable nanocomposite alginate-Ca2+ hydrogel for melittin-assisted Ca2+-overload and photothermal cancer therapy.

An injectable nanocomposite alginate-Ca2+ hydrogel embedded with melittin and polyaniline nanofibers was fabricated for Ca2+-overload and photothermal combination cancer therapy. Melittin disrupts the cell membranes and enhances Ca2+ influx significantly, improving Ca2+-overload treatment, while the polyaniline nanofibers endow the hydrogel with glutathione (GSH) depletion and photothermal ability.

Core-shell starch as a platform for reducing starch digestion and saturated fat intake.

Ill-balanced diets, especially high-carbohydrate and high-fat diets, have led to an explosion of diabetes and cardiovascular diseases worldwide, posing great threats to human health. The structural design of functional foods can offer promising solutions to these afflictions. Here, we introduce a versatile core-shell starch made from food-grade starch and alcohol-soluble protein to reduce starch digestion and saturated fat intake. The fabrication of core-shell structure is realized through an anti-solvent method, assisted by electrostatic interaction, which is generalizable to starches and proteins from different sources and feasible for scale-up production. The protein shell imparts a higher gelatinization temperature and a lower pasting viscosity to the starch, suggesting restricted granule swelling, which leads to a reduced starch digestibility as proved by in vitro digestion studies. The hypoglycemic effect of core-shell starch is demonstrated in vivo. We also show that the application of core-shell starch can be extended to oil encapsulants and saturated fat replacers due to the impact of protein shell on the surface hydrophobicity of the starch. These results may advance the establishment of healthy diets and the tackling of diet-related diseases.

The 100 most cited papers on total anomalous pulmonary venous connection: a bibliometric analysis.

BACKGROUND: The number of citations a paper receives reflects its impact on the scientific community. We aimed to identify and explore the characteristics of the most cited papers on total anomalous pulmonary venous connection (TAPVC). METHODS: Web of Science Core Collection Expanded Science Citation Index (1900 to present) was searched and papers on TAPVC were reviewed. Articles were ranked by the number of citations and the 100 most cited papers were analyzed. RESULTS: The 100 most cited papers were published between 1952 and 2018 with a mean number of citations of 52 (range 26 to 148). The 1990s was the most productive decade. All articles except one were written in English. The 100 most cited articles were published in 24 journals, led by Journal of Thoracic and Cardiovascular Surgery (21 articles), followed by Annals of Thoracic Surgery (20 articles), and Circulation (16 articles). The United States of America contributed most of the 100 most cited papers (60 articles). Hospital for Sick Children, Toronto led the list of citation classics with six papers. Christopher A. Caldarone, John W. Kirklin, and P. E. F. Daubeney were the most productive authors with 3 articles each. More than half of the papers were cohort studies (51 articles). Surgery, radiology and etiology were the main topics. Thirty-one articles were funded by public foundations, and none received support from commercial companies. CONCLUSIONS: The bibliometric analysis gives a historical perspective on scientific progress in the field of TAPVC and lays the foundation for future research.

Adverse obstetric and perinatal outcomes of patients with history of recurrent miscarriage: a retrospective cohort study.

OBJECTIVE: To examine the associations between a history of recurrent miscarriage (RM) and adverse obstetric and perinatal outcomes in the subsequent pregnancy that progressed beyond 24 weeks. DESIGN: Retrospective cohort study. SETTING: A large tertiary maternity hospital. PATIENT(S): All women who booked for antenatal care and delivery between January 2014 and August 2021 were recorded. The study was limited to women with a singleton pregnancy, and to avoid intraperson correlation, we selected the first record of delivery from each mother in the study, leaving 108,792 deliveries for analysis. Obstetric and perinatal outcomes were compared among 1994 women (1.83%) with a history of ≥2 miscarriages (RM), 11,477 women (10.55%) with a history of 1 miscarriage, and 95,321 women (87.62%) with no history of miscarriage, respectively. INTERVENTION(S): Women with a history of ≥2 miscarriages or RM. MAIN OUTCOME MEASURE(S): Obstetric complications included gestational diabetes mellitus, preeclampsia (subclassified as preterm and term preeclampsia), placenta previa, placenta accreta, and fetal distress. Perinatal outcomes included emergency cesarean section, elective cesarean section, induction, postpartum hemorrhage, preterm birth, stillbirth, Apgar score <7 at 5 minutes, neonatal asphyxia, neonatal sex, congenital; malformation, low birth weight, and neonatal death. RESULT(S): After adjusting for relevant confounders, there was an increased risk of adverse obstetric and perinatal outcomes in a subsequent pregnancy for women with a history of RM, specifically for placental dysfunction disorders: preterm preeclampsia (risk ratio [RR] = 1.58; 95% confidence interval [CI], 1.03-2.32), preterm birth (RR = 1.34; 95% CI, 1.15-1.54)], and abnormal placentation, that is placenta previa (RR = 1.78; 95% CI, 1.36-2.28), and placenta accreta (RR = 4.19; 95% CI, 2.75-6.13). CONCLUSION(S): Significant associations existed between a history of RM and the occurrence of adverse obstetric and perinatal outcomes including placental dysfunction disorders and abnormal placentation. These findings may contribute to the early detection and appropriate intervention for placenta-associated diseases in women with a history of RM, with the goal of avoiding or reducing the associated detrimental effects.

Review of surgical experience in 188 infants and young children with Ebstein anomaly.

OBJECTIVES: This study sought to review our single-institutional surgical experience in paediatric Ebstein anomaly (EA). METHODS: We retrospectively reviewed the paediatric patients with EA undergoing operation between 2004 and 2020. The time-to-event analysis was studied using Kaplan-Meier estimates. Cox regression model was used to identify risk factors for recurrent moderate-severe or greater tricuspid regurgitation (TR). RESULTS: A total of 188 patients at a median age of 3.0 [interquartile range (IQR), 1.6-5.6] years were included, among whom 108 (57.4%) underwent cone reconstruction (CR). Bidirectional cavopulmonary shunt was required in 53 patients (28.2%). There were no in-hospital deaths. The median follow-up time was 5.6 (IQR, 2.9-8.9) years. Twenty-three (12.2%) developed recurrent moderate-severe or greater TR, among whom 9 required reoperation and 1 had late death. There was a lower incidence of recurrent TR (P = 0.006) and reoperation for TR (P = 0.037) in the CR group compared with the non-CR group. There was no difference in the incidence of recurrent TR (P = 0.61), reoperation (P = 0.9) and death (P = 0.48) among patients aged <1, 1-4 and 4-18 years. CONCLUSIONS: Acceptable outcomes can be anticipated in paediatric EA undergoing CR in terms of freedom from TR of > moderate degree at a mid-term follow-up.

Biofilm Homeostasis Interference Therapy via 1 O2 -Sensitized Hyperthermia and Immune Microenvironment Re-Rousing for Biofilm-Associated Infections Elimination.

The recurrence of biofilm-associated infections (BAIs) remains high after implant-associated surgery. Biofilms on the implant surface reportedly shelter bacteria from antibiotics and evade innate immune defenses. Moreover, little is currently known about eliminating residual bacteria that can induce biofilm reinfection. Herein, novel "interference-regulation strategy" based on bovine serum albumin-iridium oxide nanoparticles (BIONPs) as biofilm homeostasis interrupter and immunomodulator via singlet oxygen (1 O2 )-sensitized mild hyperthermia for combating BAIs is reported. The catalase-like BIONPs convert abundant H2 O2 inside the biofilm-microenvironment (BME) to sufficient oxygen gas (O2 ), which can efficiently enhance the generation of 1 O2 under near-infrared irradiation. The 1 O2 -induced biofilm homeostasis disturbance (e.g., sigB, groEL, agr-A, icaD, eDNA) can disrupt the sophisticated defense system of biofilm, further enhancing the sensitivity of biofilms to mild hyperthermia. Moreover, the mild hyperthermia-induced bacterial membrane disintegration results in protein leakage and 1 O2 penetration to kill bacteria inside the biofilm. Subsequently, BIONPs-induced immunosuppressive microenvironment re-rousing successfully re-polarizes macrophages to pro-inflammatory M1 phenotype in vivo to devour residual biofilm and prevent biofilm reconstruction. Collectively, this 1 O2 -sensitized mild hyperthermia can yield great refractory BAIs treatment via biofilm homeostasis interference, mild-hyperthermia, and immunotherapy, providing a novel and effective anti-biofilm strategy.

Maternal Outcomes Among Pregnant Women With Congenital Heart Disease-Associated Pulmonary Hypertension.

BACKGROUND: Studies focused on pregnant women with congenital heart disease (CHD)-associated pulmonary hypertension (PH) are scarce and limited by small sample sizes and single-center design. This study sought to describe the pregnancy outcomes in women with CHD with and without PH. METHODS: Outcomes for pregnant women with CHD were evaluated retrospectively from 1993 to 2016 and prospectively from 2017 to 2019 from 7 tertiary hospitals. PH was diagnosed on the basis of echocardiogram or catheterization. The incidence of maternal death, cardiac complications, and obstetric and offspring complications was compared for women with CHD and no PH, mild, and moderate-to-severe PH. RESULTS: A total of 2220 pregnant women with CHD had completed pregnancies. PH associated with CHD was identified in 729 women, including 398 with mild PH (right ventricle to right atrium gradient 30-50 mm Hg) and 331 with moderate-to-severe PH (right ventricle to right atrium gradient >50 mm Hg). Maternal mortality occurred in 1 (0.1%), 0, and 19 (5.7%) women with CHD and no, mild, or moderate-to-severe PH, respectively. Of the 729 patients with PH, 619 (85%) had CHD-associated pulmonary arterial hypertension, and 110 (15%) had other forms of PH. Overall, patients with mild PH had better maternal outcomes than those with moderate-to-severe PH, including the incidence of maternal mortality or heart failure (7.8% versus 39.6%; P<0.001), other cardiac complications (9.0% versus 32.3%; P<0.001), and obstetric complications (5.3% versus 15.7%; P<0.001). Brain natriuretic peptide >100 ng/L (odds ratio, 1.9 [95% CI, 1.0-3.4], P=0.04) and New York Heart Association class III to IV (odds ratio, 2.9 [95% CI, 1.6-5.3], P<0.001) were independently associated with adverse maternal cardiac events in pregnancy with PH, whereas follow-up with a multidisciplinary team (odds ratio, 0.4 [95% CI, 0.2-0.6], P<0.001) and strict antenatal supervision (odds ratio, 0.5 [95% CI, 0.3-0.7], P=0.001) were protective. CONCLUSIONS: Women with CHD-associated mild PH appear to have better outcomes compared with women with CHD-associated moderate-to-severe PH, and with event rates similar for most outcomes with women with CHD and no PH. Multimodality risk assessment, including PH severity, brain natriuretic peptide level, and New York Heart Association class, may be useful in risk stratification in pregnancy with PH. Follow-up with a multidisciplinary team and strict antenatal supervision during pregnancy may also help to mitigate the risk of adverse maternal cardiac events.

Local delivery of gaseous signaling molecules for orthopedic disease therapy.

Over the past decade, a proliferation of research has used nanoparticles to deliver gaseous signaling molecules for medical purposes. The discovery and revelation of the role of gaseous signaling molecules have been accompanied by nanoparticle therapies for their local delivery. While most of them have been applied in oncology, recent advances have demonstrated their considerable potential in diagnosing and treating orthopedic diseases. Three of the currently recognized gaseous signaling molecules, nitric oxide (NO), carbon monoxide (CO), and hydrogen sulfide (H2S), are highlighted in this review along with their distinctive biological functions and roles in orthopedic diseases. Moreover, this review summarizes the progress in therapeutic development over the past ten years with a deeper discussion of unresolved issues and potential clinical applications.

Recent advances in responsive hydrogels for diabetic wound healing.

Poor wound healing after diabetes mellitus remains a challenging problem, and its pathophysiological mechanisms have not yet been fully elucidated. Persistent bleeding, disturbed regulation of inflammation, blocked cell proliferation, susceptible infection and impaired tissue remodeling are the main features of diabetic wound healing. Conventional wound dressings, including gauze, films and bandages, have a limited function. They generally act as physical barriers and absorbers of exudates, which fail to meet the requirements of the whol diabetic wound healing process. Wounds in diabetic patients typically heal slowly and are susceptible to infection due to hyperglycemia within the wound bed. Once bacterial cells develop into biofilms, diabetic wounds will exhibit robust drug resistance. Recently, the application of stimuli-responsive hydrogels, also known as "smart hydrogels", for diabetic wound healing has attracted particular attention. The basic feature of this system is its capacities to change mechanical properties, swelling ability, hydrophilicity, permeability of biologically active molecules, etc., in response to various stimuli, including temperature, potential of hydrogen (pH), protease and other biological factors. Smart hydrogels can improve therapeutic efficacy and limit total toxicity according to the characteristics of diabetic wounds. In this review, we summarized the mechanism and application of stimuli-responsive hydrogels for diabetic wound healing. It is hoped that this work will provide some inspiration and suggestions for research in this field.

Strategies to prevent, curb and eliminate biofilm formation based on the characteristics of various periods in one biofilm life cycle.

Biofilms are colonies of bacteria embedded inside a complicated self-generating intercellular. The formation and scatter of a biofilm is an extremely complex and progressive process in constant cycles. Once formed, it can protect the inside bacteria to exist and reproduce under hostile conditions by establishing tolerance and resistance to antibiotics as well as immunological responses. In this article, we reviewed a series of innovative studies focused on inhibiting the development of biofilm and summarized a range of corresponding therapeutic methods for biological evolving stages of biofilm. Traditionally, there are four stages in the biofilm formation, while we systematize the therapeutic strategies into three main periods precisely:(i) period of preventing biofilm formation: interfering the colony effect, mass transport, chemical bonds and signaling pathway of plankton in the initial adhesion stage; (ii) period of curbing biofilm formation:targeting several pivotal molecules, for instance, polysaccharides, proteins, and extracellular DNA (eDNA) via polysaccharide hydrolases, proteases, and DNases respectively in the second stage before developing into irreversible biofilm; (iii) period of eliminating biofilm formation: applying novel multifunctional composite drugs or nanoparticle materials cooperated with ultrasonic (US), photodynamic, photothermal and even immune therapy, such as adaptive immune activated by stimulated dendritic cells (DCs), neutrophils and even immunological memory aroused by plasmocytes. The multitargeted or combinational therapies aim to prevent it from developing to the stage of maturation and dispersion and eliminate biofilms and planktonic bacteria simultaneously.

An Experimental Investigation on Polarization Process of a PZT-52 Tube Actuator with Interdigitated Electrodes.

The manipulator is the key component of the micromanipulator. Using the axial expansion and contraction properties, the piezoelectric tube can drive the manipulator to achieve micro-motion positioning. It is widely used in scanning probe microscopy, fiber stretching and beam scanning. The piezoceramic tube actuator used to have continuous electrodes inside and outside. It is polarized along the radial direction. There are relatively high polarization voltages, but poor axial mechanical properties. A new tubular actuator is presented in this paper by combining interdigitated electrodes and piezoceramic tubes. The preparation, polarization and mesoscopic mechanical properties were investigated. Using Lead Zirconate Titanate (PZT-52) as a substrate, the preparation process of interdigitated electrodes by screen printing was studied. For initial polarization voltage determination, the local characteristic model of the actuator was extracted and the electric field was analyzed by a finite element method. By measuring the actuator's axial displacement, we measured the actuator's polarization effect. Various voltages, times and temperatures were evaluated to determine how polarization affects the actuator's displacement. Optimal polarization conditions are 800 V, 60 min and 150 °C, with a maximum displacement of 0.88 µm generated by a PZT-52 tube actuator with interdigitated electrodes. PZT-52 tube actuators with a continuous electrode cannot be polarized under these conditions. The maximum displacement is 0.47 µm after polarization at 4 kV. Based on the results, the new actuator has a more convenient polarization process and a greater axial displacement from an application standpoint. It provides technical guidance for the preparation and polarization of the piezoceramic tube actuator. There is potential for piezoelectric tubular actuators to be used in a broader range of applications.

Diagnosis and Treatment of Schatzker Type II Tibial Plateau Fracture with An Isolated Bone Fragment: A Case Report and Literature Review.

BACKGROUND: An isolated bone fragment from the posterolateral tibial plateau retrieved from the patellofemoral compartment is a rarely seen Schatzker type II tibial plateau fracture and is prone to misdiagnosis. To the best of our knowledge, this injury mechanism has not been previously described. CASE PRESENTATION: A 63-year-old female sustained left knee pain and activity limitation after falling off an electric bicycle. Local hospital ignored the intra-articular bone fragment and failed to provide effective treatment. This case described an uncommon Schatzker type II tibial plateau fracture with an isolated bone fragment, its physical examination and radiological findings, the potential injury mechanism, and surgical protocol. CONCLUSIONS: Combining the physical examination and radiological findings to evaluate the potential injury mechanism is important for developing an appropriate surgical protocol.

High pressure investigations on TTF-TCNQ charge-transfer complexes.

Charge-transfer complexes (CTC) exhibit promising application in scientific field. A prototype CTC (TTF-TCNQ), formed by charge donating (tetrathiafulvalene) and charge accepting (tetracyanoquinodimethane) molecule, was systematically studied by Raman method. By combining Raman and synchrony X-ray diffraction (XRD), we investigated the high-pressure structures of TTF-TCNQ up to 15 GPa, and did not observe any first-order phase transition. Finally, a detailed evolution of structure for TTF-TCNQ, versus pressure, is provided, offering a new pathway to investigate the structural stability of CTC.

Association among starch storage, metabolism, related genes and growth of Moso bamboo (Phyllostachys heterocycla) shoots.

BACKGROUND: Both underground rhizomes/buds and above-ground Moso bamboo (Phyllostachys heterocycla) shoots/culms/branches are connected together into a close inter-connecting system in which nutrients are transported and shared among each organ. However, the starch storage and utilization mechanisms during bamboo shoot growth remain unclear. This study aimed to reveal in which organs starch was stored, how carbohydrates were transformed among each organ, and how the expression of key genes was regulated during bamboo shoot growth and developmental stages which should lay a foundation for developing new theoretical techniques for bamboo cultivation. RESULTS: Based on changes of the NSC content, starch metabolism-related enzyme activity and gene expression from S0 to S3, we observed that starch grains were mainly elliptical in shape and proliferated through budding and constriction. Content of both soluble sugar and starch in bamboo shoot peaked at S0, in which the former decreased gradually, and the latter initially decreased and then increased as shoots grew. Starch synthesis-related enzymes (AGPase, GBSS and SBE) and starch hydrolase (α-amylase and ß-amylase) activities exhibited the same dynamic change patterns as those of the starch content. From S0 to S3, the activity of starch synthesis-related enzyme and starch amylase in bamboo rhizome was significantly higher than that in bamboo shoot, while the NSC content in rhizomes was obviously lower than that in bamboo shoots. It was revealed by the comparative transcriptome analysis that the expression of starch synthesis-related enzyme-encoding genes were increased at S0, but reduced thereafter, with almost the same dynamic change tendency as the starch content and metabolism-related enzymes, especially during S0 and S1. It was revealed by the gene interaction analysis that AGPase and SBE were core genes for the starch and sucrose metabolism pathway. CONCLUSIONS: Bamboo shoots were the main organ in which starch was stored, while bamboo rhizome should be mainly functioned as a carbohydrate transportation channel and the second carbohydrate sink. Starch metabolism-related genes were expressed at the transcriptional level during underground growth, but at the post-transcriptional level during above-ground growth. It may be possible to enhance edible bamboo shoot quality for an alternative starch source through genetic engineering.

Modified Alginate-Based Hydrogel as a Carrier of the CB2 Agonist JWH133 for Bone Engineering.

Alginate hydrogels have been widely used as excellent scaffold materials for implantation in biological systems because of their good biocompatibility. However, it is difficult to repair bone defects with these materials because of their poor mechanical properties. The aim of the present study was to fabricate a novel degradable alginate/palygorskite (PAL) composite hydrogel with good mechanical properties and investigate its potential for application in bone defect repair. The modified alginate-based hydrogel with increasing PAL content exhibited better mechanical properties than the original alginate hydrogel. In addition, the resulting composite hydrogel was thoroughly characterized by scanning electron microscopy (SEM). With increasing PAL content, the swelling ratio of the hydrogel increased in PBS (pH = 7.4). In vitro cytocompatibility was evaluated using bone marrow-derived mesenchymal stem cells (BMSCs) to confirm that the developed composite hydrogel was cytocompatible after 1, 3, and 7 days. All these results suggest that the developed composite hydrogel has great potential for bone tissue engineering applications. JWH133 is a selective agonist of cannabinoid receptor type 2 (CB2), which exerts dual anti-inflammatory and anti-osteoclastogenic effects. We co-cultured BMSCs with composite hydrogels loaded with JWH133, and analysis of proliferation and osteogenic differentiation indicated that the composite hydrogel loaded with JWH133 may enhance the osteogenic differentiation of rat BMSCs. Furthermore, we found that the composite hydrogel loaded with JWH133 inhibited osteoclast formation and the mRNA expression of osteoclast-specific markers. In summary, the developed composite hydrogel has a high drug-loading capacity, good biocompatibility, and strong potential as a drug carrier for treating osteoporosis by promoting osteoblast and inhibiting osteoclast formation and function.

Modulating the in vitro gastric digestion of heat-induced beta-lactoglobulin aggregates: Incorporation with polysaccharide.

Three heat-induced protein aggregates, beta-lactoglobulin fibrils (BLGF), nanoparticles (BLGN), and worm-like aggregates (BLGW) were chosen to probe the effect of disulfide bond and surface hydrophobicity on their gastric digestion behavior. Furthermore, the effect of polysaccharide (dextran sulfate sodium, DSS) on the digestion behavior of the protein aggregates was investigated. Results showed that disulfide bond had a mild restraint on the digestion extent (maximum up to 4.65%), especially when its content was below 1 mol/mol, while the surface hydrophobicity had a stronger influence (up to 8.96%), and there is definitive positive linear relationship between the surface hydrophobicity and the digestion extent. When incorporated with DSS, both the disulfide bond content and surface hydrophobicity of the aggregates decreased, consequently, and the digestion was impeded, confirming the stronger effect from the surface hydrophobicity. The digestion extent of the heat-induced protein aggregates could be modulated linearly by incorporation of polysaccharide.

Prompt nitrogen removal by controlling the oxygen concentration in sediment microbial fuel cell systems: the electrons allocation and its microbial mechanism.

It has been proved that the nitrogen can be removed from the sediment in a sediment microbial fuel cell system (SMFCs), but the competition between nitrate and oxygen for electrons would be a key factor that would affect the removal efficiency, and its mechanism is not clear. Based on organic sediment fuel, an SMFC was constructed, and the influence of dissolved oxygen (DO) on nitrogen transformation and cathodic microbial communities was investigated. The results showed that the best total nitrogen removal efficiency of 60.55% was achieved at DO level of 3 mg/L. High DO concentration affected the removal efficiency through the electrons' competition with nitrate, while low DO concentration suppressed the nitrification. Comamonas, Diaphorobacter and Brevundimonas were the three dominant genera responsible for denitrification at DO concentration of 3 mg/L in this study. The establishment of SMFCs for nitrogen removal by regulating DO level would offer a promising method for sediment treatment.