RESUMEN
Roots are crucial in plant adaptation through the exudation of various compounds which are influenced and modified by environmental factors. Buckwheat root exudate and root system response to neighbouring plants (buckwheat or redroot pigweed) and how these exudates affect redroot pigweed was investigated. Characterising root exudates in plant-plant interactions presents challenges, therefore a split-root system which enabled the application of differential treatments to parts of a single root system and non-destructive sampling was developed. Non-targeted metabolome profiling revealed that neighbour presence and identity induces systemic changes. Buckwheat and redroot pigweed neighbour presence upregulated 64 and 46 metabolites, respectively, with an overlap of only 7 metabolites. Root morphology analysis showed that, while the presence of redroot pigweed decreased the number of root tips in buckwheat, buckwheat decreased total root length and volume, surface area, number of root tips, and forks of redroot pigweed. Treatment with exudates (from the roots of buckwheat and redroot pigweed closely interacting) on redroot pigweed decreased the total root length and number of forks of redroot pigweed seedlings when compared to controls. These findings provide understanding of how plants modify their root exudate composition in the presence of neighbours and how this impacts each other's root systems.
Asunto(s)
Amaranthus , Productos Biológicos , Fagopyrum , Metaboloma , Meristema , Plantones , Productos Biológicos/metabolismo , Raíces de Plantas/metabolismoRESUMEN
Deciphering root exudate composition of soil-grown plants is considered a crucial step to better understand plant-soil-microbe interactions affecting plant growth performance. In this study, two genotypes of Zea mays L. (WT, rth3) differing in root hair elongation were grown in the field in two substrates (sand, loam) in custom-made, perforated columns inserted into the field plots. Root exudates were collected at different plant developmental stages (BBCH 14, 19, 59, 83) using a soil-hydroponic-hybrid exudation sampling approach. Exudates were characterized by LC-MS based non-targeted metabolomics, as well as by photometric assays targeting total dissolved organic carbon, soluble carbohydrates, proteins, amino acids, and phenolics. Results showed that plant developmental stage was the main driver shaping both the composition and quantity of exuded compounds. Carbon (C) exudation per plant increased with increasing biomass production over time, while C exudation rate per cm² root surface area h-1 decreased with plant maturity. Furthermore, exudation rates were higher in the substrate with lower nutrient mobility (i.e., loam). Surprisingly, we observed higher exudation rates in the root hairless rth3 mutant compared to the root hair-forming WT sibling, though exudate metabolite composition remained similar. Our results highlight the impact of plant developmental stage on the plant-soil-microbe interplay.
Asunto(s)
Metabolómica , Zea mays , Zea mays/metabolismo , Genotipo , Carbono/metabolismo , Suelo/química , Raíces de Plantas/metabolismoRESUMEN
Changes of volatile organic compounds (VOCs) patterns during 6 days of storage at +4 °C were investigated in different freshwater fish species, namely carp and trout, using dynamic headspace gas chromatography time-of-flight mass spectrometry (DHS-GC-TOFMS). DHS parameters were systematically optimized to establish optimum extraction and pre-concentration of VOCs. Moreover, different sample preparation methods were tested: mincing with a manual meat grinder, as well as mincing plus homogenization with a handheld homogenizer both without and with water addition. The addition of water during sample preparation led to pronounced changes of the volatile profiles, depending on the molecular structure and lipophilicity of the analytes, resulting in losses of up to 98 % of more lipophilic compounds (logP > 3). The optimized method was applied to trout and carp. Trout samples of different storage days were compared using univariate (Mann-Whitney U test, fold change calculation) and multivariate (OPLS-DA) statistics. 37 potential spoilage markers were selected; for 11 compounds identity could be confirmed via measurement of authentic standards and 10 compounds were identified by library spectrum match. 22 compounds were also found to be statistically significant spoilage markers in carp. Merging results of the different statistical approaches, the list of 37 compounds could be narrowed down to the 14 most suitable for trout spoilage assessment. This study comprises a systematic evaluation of the capabilities of DHS-GC coupled to high-resolution (HR) MS for studying spoilage in different freshwater fish species, including a comprehensive data evaluation workflow.
Asunto(s)
Carpas , Compuestos Orgánicos Volátiles , Animales , Flujo de Trabajo , Agua Dulce , AguaRESUMEN
Root exudation is a major pathway of organic carbon input into soils. It affects soil physical properties, element solubility as well as speciation, and impacts the microbial community in the rhizosphere. Root exudates contain a large number of primary and secondary plant metabolites, and the amount and composition are highly variable depending on plant species and developmental stage. Detailed information about exudate composition will allow for a better understanding of exudate-driven rhizosphere processes and their feedback loops. Although non-targeted metabolomics by high-resolution mass spectrometry is an established tool to characterize root exudate composition, the extent and depth of the information obtained depends strongly on the analytical approach applied. Here, two genotypes of Zea mays L., differing in root hair development, were used to compare six mass spectrometric approaches for the analysis of root exudates. Reversed-phase liquid chromatography and hydrophilic interaction liquid chromatography combined with time-of-flight mass spectrometry (LC-TOF-MS), as well as direct infusion Fourier-transform ion cyclotron resonance mass spectrometry (DI-FT-ICR-MS), were applied with positive and negative ionization mode. By using the same statistical workflow, the six approaches resulted in different numbers of detected molecular features, ranging from 176 to 889, with a fraction of 48 to 69% of significant features (fold change between the two genotypes of > 2 and p-value < 0.05). All approaches revealed the same trend between genotypes, namely up-regulation of most metabolites in the root hair defective mutant (rth3). These results were in agreement with the higher total carbon and nitrogen exudation rate of the rth3-mutant as compared to the corresponding wild-type maize (WT). However, only a small fraction of features were commonly found across the different analytical approaches (20-79 features, 13-31% of the rth3-mutant up-regulated molecular formulas), highlighting the need for different mass spectrometric approaches to obtain a more comprehensive view into the composition of root exudates. In summary, 111 rth3-mutant up-regulated compounds (92 different molecular formulas) were detected with at least two different analytical approaches, while no WT up-regulated compound was found by both, LC-TOF-MS and DI-FT-ICR-MS. Zea mays L. exudate features obtained with multiple analytical approaches in our study were matched against the metabolome database of Zea mays L. (KEGG) and revealed 49 putative metabolites based on their molecular formula.
Asunto(s)
Metaboloma , Metabolómica , Metabolómica/métodos , Espectrometría de Masas/métodos , Exudados y Transudados , Carbono/análisis , Raíces de Plantas/químicaRESUMEN
BACKGROUND: The yeast genus Komagataella currently consists of seven methylotrophic species isolated from tree environments. Well-characterized strains of K. phaffii and K. pastoris are important hosts for biotechnological applications, but the potential of other species from the genus remains largely unexplored. In this study, we characterized 25 natural isolates from all seven described Komagataella species to identify interesting traits and provide a comprehensive overview of the genotypic and phenotypic diversity available within this genus. RESULTS: Growth tests on different carbon sources and in the presence of stressors at two different temperatures allowed us to identify strains with differences in tolerance to high pH, high temperature, and growth on xylose. As Komagataella species are generally not considered xylose-utilizing yeasts, xylose assimilation was characterized in detail. Growth assays, enzyme activity measurements and 13C labeling confirmed the ability of K. phaffii to utilize D-xylose via the oxidoreductase pathway. In addition, we performed long-read whole-genome sequencing to generate genome assemblies of all Komagataella species type strains and additional K. phaffii and K. pastoris isolates for comparative analysis. All sequenced genomes have a similar size and share 83-99% average sequence identity. Genome structure analysis showed that K. pastoris and K. ulmi share the same rearrangements in difference to K. phaffii, while the genome structure of K. kurtzmanii is similar to K. phaffii. The genomes of the other, more distant species showed a larger number of structural differences. Moreover, we used the newly assembled genomes to identify putative orthologs of important xylose-related genes in the different Komagataella species. CONCLUSIONS: By characterizing the phenotypes of 25 natural Komagataella isolates, we could identify strains with improved growth on different relevant carbon sources and stress conditions. Our data on the phenotypic and genotypic diversity will provide the basis for the use of so-far neglected Komagataella strains with interesting characteristics and the elucidation of the genetic determinants of improved growth and stress tolerance for targeted strain improvement.
Asunto(s)
Saccharomycetales , Xilosa , Carbono/metabolismo , Fenotipo , Pichia/metabolismo , Saccharomycetales/genética , Xilosa/metabolismo , LevadurasRESUMEN
Non-target analysis (NTA) employing high-resolution mass spectrometry is a commonly applied approach for the detection of novel chemicals of emerging concern in complex environmental samples. NTA typically results in large and information-rich datasets that require computer aided (ideally automated) strategies for their processing and interpretation. Such strategies do however raise the challenge of reproducibility between and within different processing workflows. An effective strategy to mitigate such problems is the implementation of inter-laboratory studies (ILS) with the aim to evaluate different workflows and agree on harmonized/standardized quality control procedures. Here we present the data generated during such an ILS. This study was organized through the Norman Network and included 21 participants from 11 countries. A set of samples based on the passive sampling of drinking water pre and post treatment was shipped to all the participating laboratories for analysis, using one pre-defined method and one locally (i.e. in-house) developed method. The data generated represents a valuable resource (i.e. benchmark) for future developments of algorithms and workflows for NTA experiments.
Asunto(s)
Benchmarking , Agua Potable/análisis , Espectrometría de Masas , Algoritmos , Laboratorios , Flujo de TrabajoRESUMEN
Synthetic water-soluble polymeric materials are widely employed in e.g. cleaning detergents, personal care products, paints or textiles. Accordingly, these compounds reach sewage treatment plants and may enter receiving waters and the aquatic environment. Characteristically, these molecules show a polydisperse molecular weight distribution, comprising multiple repeating units, i.e. a homologous series (HS). Their analysis in environmentally relevant samples has received some attention over the last two decades, however, the majority of previous studies focused on surfactants and a molecular weight range <1000 Da. To capture a wider range on the mass versus polarity plane and extend towards less polar contaminants, a workflow was established using three different ionization strategies, namely conventional electrospray ionization, atmospheric pressure photoionization and atmospheric pressure chemical ionization. The data evaluation consisted of suspect screening of ca. 1200 suspect entries and a non-target screening of HS with pre-defined accurate mass differences using ca. 400 molecular formulas of repeating units of HS as input and repeating retention time shifts as HS indicator. To study the fate of these water-soluble polymeric substances in the wastewater treatment process, the different stages, i.e. after primary and secondary clarifier, and after ozonation followed by sand filtration, were sampled at a Swiss wastewater treatment plant. Remaining with two different ionization interfaces, ESI and APPI, in both polarities, a non-targeted screening approach led to a total number of 146 HS (each with a minimum number of 4 members), with a molecular mass of up to 1200 detected in the final effluent. Of the 146 HS, ca 15% could be associated with suspect hits and approximately 25% with transformation products of suspects. Tentative characterization or probable chemical structure could be assigned to almost half of the findings. In positive ionization mode various sugar derivatives with differing side chains, for negative mode structures with sulfonic acids, could be characterized. The number of detected HS decreased significantly over the three treatment stages. For HS detectable also in the biological and oxidative treatment stages, a change in HS distribution towards to lower mass range was often observed.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Cromatografía Liquida , Aguas Residuales/análisis , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
N-Acetylglucosamine is a key component of bacterial and fungal cell walls and of the extracellular matrix of animal cells. It plays a variety of roles at the cell surface structure and is under discussion to be involved in signaling pathways. The presence of a number of N-acetylhexosamine stereoisomers in samples of biological or biotechnological origin demands for dedicated high efficiency separation methods, due to identical exact mass and similar fragmentation patterns of the stereoisomers. Gas chromatography offers high sample capacity, separation efficiency, and precision under repeatability conditions of measurement, which is a necessity for the analysis of low abundant stereoisomers in biological samples. Automated online derivatization facilitates to overcome the main obstacle for the use of gas chromatography in metabolomics, namely, the derivatization of polar metabolites prior to analysis. Using alkoximation and subsequent trimethylsilylation, carbohydrates and their derivatives are known to show several derivatives, since derivatization is incomplete as well as highly matrix dependent inherent to the high number of functional groups present in carbohydrates. A method based on efficient separation of ethoximated and trimethylsilylated N-acetylglucosamines was developed. Accurate absolute quantification is enabled using biologically derived 13C labeled internal standards eliminating systematic errors related to sample pretreatment and analysis. Due to the lack of certified reference materials, a methodological comparison between tandem and time-of-flight mass spectrometric instrumentation was performed for mass spectrometric assessment of trueness. Both methods showed limits of detection in the lower femtomol range. The methods were applied to biological samples of Penicillium chrysogenum cultivations with different matrices revealing excellent agreement of both mass spectrometric techniques.
Asunto(s)
Acetilglucosamina/análisis , Penicillium chrysogenum/química , Automatización , Conformación de Carbohidratos , Células Cultivadas , Cromatografía de Gases , Espectrometría de Masas , Penicillium chrysogenum/citologíaRESUMEN
The accurate and precise analysis of isotopologue and tandem mass isotopologue ratios in heavy stable isotope labeling experiments is a critical part of assessing absolute intracellular metabolic fluxes. Resulting from feeding the organism of interest with a specifically isotope-labeled substrate, the principal characteristics of these labeling experiments are the metabolites' non-naturally distributed isotopologue patterns. For the purpose of inferring metabolic rates by maximizing the fit between a priori simulated and experimentally obtained labeling patterns, 13C is the preferred stable isotope of use.The analysis of the obtained labeling patterns can be approached by different mass spectrometric approaches. Gas chromatography (GC) features broad metabolite coverage and excellent separation efficiency of biologically relevant isomers. These advantages compensate for laborious derivatization steps and the resulting need for interference correction for natural abundant isotopes.Here, we describe a workflow based on GC-high resolution mass spectrometry with chemical ionization for the analysis of carbon-isotopologue distributions and some positional labeling information of primary metabolites. To study the associated measurement uncertainty of the resulting 13C labeling patterns, guidance to uncertainty estimation according to the EURACHEM guidelines with Monte-Carlo simulation is provided.
Asunto(s)
Isótopos de Carbono/química , Cromatografía de Gases y Espectrometría de Masas/métodos , Espectrometría de Masas en Tándem/métodos , Marcaje Isotópico/métodos , Metabolómica/métodos , Método de Montecarlo , Pichia/metabolismo , IncertidumbreRESUMEN
RATIONALE: The wide chemical diversity and complex matrices inherent to metabolomics still pose a challenge to current analytical approaches for metabolite screening. Although dedicated front-end separation techniques combined with high-resolution mass spectrometry set the benchmark from an analytical point of view, the increasing number of samples and sample complexity demand for a compromise in terms of selectivity, sensitivity and high-throughput analyses. METHODS: Prior to low-field drift tube ion mobility (IM) separation and quadrupole time-of-flight mass spectrometry (QTOFMS) detection, rapid ultrahigh-performance liquid chromatography separation was used for analysis of different concentration levels of dansylated metabolites present in a yeast cell extract. For identity confirmation of metabolites at the MS2 level, an alternating frame approach was chosen and two different strategies were tested: a data-independent all-ions acquisition and a quadrupole broad band isolation (Q-BBI) directed by IM drift separation. RESULTS: For Q-BBI analysis, the broad mass range isolation was successfully optimized in accordance with the distinctive drift time to m/z correlation of the dansyl derivatives. To guarantee comprehensive sampling, a broad mass isolation window of 70 Da was employed. Fragmentation was performed via collision-induced dissociation, applying a collision energy ramp optimized for the dansyl derivatives. Both approaches were studied in terms of linear dynamic range and repeatability employing ethanolic extracts of Pichia pastoris spiked with 1 µM metabolite mixture. Example data obtained for histidine and glycine showed that drift time precision (<0.01 to 0.3% RSD, n = 5) compared very well with the data reported in an earlier IM-TOFMS-based study. CONCLUSIONS: Chimeric mass spectra, inherent to data-independent analysis approaches, are reduced when using a drift time directed Q-BBI approach. Additionally, an improved linear dynamic working range was observed, representing, together with a rapid front-end separation, a powerful approach for metabolite screening.
Asunto(s)
Espectrometría de Masas/métodos , Metabolómica/métodos , Proteínas de Saccharomyces cerevisiae/química , Saccharomyces cerevisiae/química , Metaboloma , Saccharomyces cerevisiae/genética , Saccharomyces cerevisiae/metabolismo , Proteínas de Saccharomyces cerevisiae/genética , Proteínas de Saccharomyces cerevisiae/metabolismoRESUMEN
For the study of different levels of (intra)cellular regulation and condition-dependent insight into metabolic activities, fluxomics experiments based on stable isotope tracer experiments using 13C have become a well-established approach. The experimentally obtained non-naturally distributed 13C labeling patterns of metabolite pools can be measured by mass spectrometric detection with front-end separation and can be consequently incorporated into biochemical network models. Here, despite a tedious derivatization step, gas chromatographic separation of polar metabolites is favorable because of the wide coverage range and high isomer separation efficiency. However, the typically employed electron ionization energy of 70 eV leads to significant fragmentation and consequently only low-abundant ions with an intact carbon backbone. Since these ions are considered a prerequisite for the analysis of the non-naturally distributed labeling patterns and further integration into modeling strategies, a softer ionization technique is needed. In the present work, a novel low energy electron ionization source is optimized for the analysis of primary metabolites and compared with a chemical ionization approach in terms of trueness, precision, and sensitivity.
RESUMEN
The Crabtree phenotype defines whether a yeast can perform simultaneous respiration and fermentation under aerobic conditions at high growth rates. It provides Crabtree positive yeasts an evolutionary advantage of consuming glucose faster and producing ethanol to outcompete other microorganisms in sugar rich environments. While a number of genetic events are associated with the emergence of the Crabtree effect, its evolution remains unresolved. Here we show that overexpression of a single Gal4-like transcription factor is sufficient to convert Crabtree-negative Komagataella phaffii (Pichia pastoris) into a Crabtree positive yeast. Upregulation of the glycolytic genes and a significant increase in glucose uptake rate due to the overexpression of the Gal4-like transcription factor leads to an overflow metabolism, triggering both short-term and long-term Crabtree phenotypes. This indicates that a single genetic perturbation leading to overexpression of one gene may have been sufficient as the first molecular event towards respiro-fermentative metabolism in the course of yeast evolution.
Asunto(s)
Fermentación , Proteínas Fúngicas/metabolismo , Glucólisis , Pichia/metabolismo , Factores de Transcripción/metabolismo , Etanol/metabolismo , Glucosa/metabolismo , FenotipoRESUMEN
In the field of metabolic engineering 13C-based metabolic flux analysis experiments have proven successful in indicating points of action. As every step of this approach is affected by an inherent error, the aim of the present work is the comprehensive evaluation of factors contributing to the uncertainty of nonnaturally distributed C-isotopologue abundances as well as to the absolute flux value calculation. For this purpose, a previously published data set, analyzed in the course of a 13C labeling experiment studying glycolysis and the pentose phosphate pathway in a yeast cell factory, was used. Here, for isotopologue pattern analysis of these highly polar metabolites that occur in multiple isomeric forms, a gas chromatographic separation approach with preceding derivatization was used. This rendered a natural isotope interference correction step essential. Uncertainty estimation of the resulting C-isotopologue distribution was performed according to the EURACHEM guidelines with Monte Carlo simulation. It revealed a significant increase for low-abundance isotopologue fractions after application of the necessary correction step. For absolute flux value estimation, isotopologue fractions of various sugar phosphates, together with the assessed uncertainties, were used in a metabolic model describing the upper part of the central carbon metabolism. The findings pinpointed the influence of small isotopologue fractions as sources of error and highlight the need for improved model curation. Graphical abstract á .
Asunto(s)
Análisis de Flujos Metabólicos/métodos , Pichia/metabolismo , Isótopos de Carbono/análisis , Isótopos de Carbono/metabolismo , Simulación por Computador , Ingeniería Metabólica , Redes y Vías Metabólicas , Metaboloma , Metabolómica/métodos , Modelos Biológicos , Método de Montecarlo , Pichia/química , Pichia/citología , IncertidumbreRESUMEN
Non-targeted analysis of metabolites in hypothesis-generating workflows has proven its potential to answer essential questions that arise when dealing with complex biological systems. Nevertheless, tracking changes in perturbed systems via accurate quantification and the identification process itself represent the most critical challenges in these workflows. Recent advances in ion mobility-mass spectrometry have enabled this technique to increase the confidence of metabolite annotation by introducing a complementary conditional molecular descriptor, that is collision cross section.
Asunto(s)
Espectrometría de Movilidad Iónica/métodos , Espectrometría de Masas/métodos , Metabolómica/métodos , Calibración , Espectrometría de Movilidad Iónica/instrumentación , Espectrometría de Masas/instrumentación , Incertidumbre , Flujo de TrabajoRESUMEN
Collision cross section (CCS) measurements resulting from ion mobility-mass spectrometry (IM-MS) experiments provide a promising orthogonal dimension of structural information in MS-based analytical separations. As with any molecular identifier, interlaboratory standardization must precede broad range integration into analytical workflows. In this study, we present a reference drift tube ion mobility mass spectrometer (DTIM-MS) where improvements on the measurement accuracy of experimental parameters influencing IM separations provide standardized drift tube, nitrogen CCS values (DTCCSN2) for over 120 unique ion species with the lowest measurement uncertainty to date. The reproducibility of these DTCCSN2 values are evaluated across three additional laboratories on a commercially available DTIM-MS instrument. The traditional stepped field CCS method performs with a relative standard deviation (RSD) of 0.29% for all ion species across the three additional laboratories. The calibrated single field CCS method, which is compatible with a wide range of chromatographic inlet systems, performs with an average, absolute bias of 0.54% to the standardized stepped field DTCCSN2 values on the reference system. The low RSD and biases observed in this interlaboratory study illustrate the potential of DTIM-MS for providing a molecular identifier for a broad range of discovery based analyses.
Asunto(s)
Espectrometría de Movilidad Iónica/métodos , Laboratorios/normas , Espectrometría de Masas/métodos , Calibración , Lípidos/química , Estructura Molecular , Nitrógeno/química , Proteínas/química , Reproducibilidad de los ResultadosRESUMEN
A novel analytical approach based on liquid chromatography coupled to quadrupole time of flight mass spectrometry, employing data-dependent triggering for analysis of isotopologue and tandem mass isotopomer fractions of metabolites of the primary carbon metabolism was developed. The implemented QTOFMS method employs automated MS/MS triggering of higher abundant, biologically relevant isotopologues for generating positional information of the respective metabolite. Using this advanced isotopologue selective fragmentation approach enables the generation of significant tandem mass isotopomer data within a short cycle time without compromising sensitivity. Due to a lack of suitable reference material certified for isotopologue ratios, a Pichia pastoris cell extract with a defined 13C distribution as well as a cell extract from a 13C-based metabolic flux experiment were employed for proof of concept. Moreover, a method inter-comparison with an already established GC-CI-(Q)TOFMS approach was conducted. Both methods showed good agreement on isotopologue and tandem mass isotopomer distributions for the two different cell extracts. Graphical abstract Schematic overview of data-dependent isotopologue fragmentation for acquisition of isotopologue and tandem mass isotopomer fractions.
Asunto(s)
Análisis de Flujos Metabólicos/métodos , Pichia/metabolismo , Espectrometría de Masas en Tándem/métodos , Isótopos de Carbono/análisis , Isótopos de Carbono/metabolismo , Cromatografía Liquida/métodos , Marcaje Isotópico/métodos , Pichia/química , Flujo de TrabajoRESUMEN
Production of heterologous proteins in Pichia pastoris (syn. Komagataella sp.) has been shown to exert a metabolic burden on the host metabolism. This burden is associated with metabolite drain, which redirects nucleotides and amino acids from primary metabolism. On the other hand, recombinant protein production affects energy and redox homeostasis of the host cell. In a previous study, we have demonstrated that overexpression of single genes of the oxidative pentose phosphate pathway (PPP) had a positive influence on recombinant production of cytosolic human superoxide dismutase (hSOD). In this study, different combinations of these genes belonging to the oxidative PPP were generated and analyzed. Thereby, a 3.8-fold increase of hSOD production was detected when glucose-6-phosphate dehydrogenase (ZWF1) and 6-gluconolactonase (SOL3) were simultaneously overexpressed, while the combinations of other genes from PPP had no positive effect on protein production. By measuring isotopologue patterns of (13)C-labelled metabolites, we could detect an upshift in the flux ratio of PPP to glycolysis upon ZWF1 and SOL3 co-overexpression, as well as increased levels of 6-phosphogluconate. The substantial improvement of hSOD production by ZWF1 and SOL3 co-overexpression appeared to be connected to an increase in PPP flux. In conclusion, we show that overexpression of SOL3 together with ZWF1 enhanced both the PPP flux ratio and hSOD accumulation, providing evidence that in P. pastoris Sol3 limits the flux through PPP and recombinant protein production.
Asunto(s)
Expresión Génica , Vía de Pentosa Fosfato , Pichia/metabolismo , Proteínas Recombinantes/biosíntesis , Superóxido Dismutasa/biosíntesis , Glucosa/metabolismo , Humanos , Pichia/genética , Proteínas Recombinantes/genética , Superóxido Dismutasa/genéticaRESUMEN
SUMMARY: Isotope tracer experiments are an invaluable technique to analyze and study the metabolism of biological systems. However, isotope labeling experiments are often affected by naturally abundant isotopes especially in cases where mass spectrometric methods make use of derivatization. The correction of these additive interferences--in particular for complex isotopic systems--is numerically challenging and still an emerging field of research. When positional information is generated via collision-induced dissociation, even more complex calculations for isotopic interference correction are necessary. So far, no freely available tools can handle tandem mass spectrometry data. We present isotope correction toolbox, a program that corrects tandem mass isotopomer data from tandem mass spectrometry experiments. Isotope correction toolbox is written in the multi-platform programming language Perl and, therefore, can be used on all commonly available computer platforms. AVAILABILITY AND IMPLEMENTATION: Source code and documentation can be freely obtained under the Artistic License or the GNU General Public License from: https://github.com/jungreuc/isotope_correction_toolbox/ CONTACT: {christian.jungreuthmayer@boku.ac.at,juergen.zanghellini@boku.ac.at} SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.
Asunto(s)
Marcaje Isotópico/métodos , Programas Informáticos , Algoritmos , Humanos , Lenguajes de ProgramaciónRESUMEN
For the first time an analytical work flow based on accurate mass gas chromatography-quadrupole time-of-flight mass spectrometry (GC-QTOFMS) with chemical ionization for analysis providing a comprehensive picture of (13)C distribution along the primary metabolism is elaborated. The method provides a powerful new toolbox for (13)C-based metabolic flux analysis, which is an emerging strategy in metabolic engineering. In this field, stable isotope tracer experiments based on, for example, (13)C are central for providing characteristic patterns of labeled metabolites, which in turn give insights into the regulation of metabolic pathway kinetics. The new method enables the analysis of isotopologue fractions of 42 free intracellular metabolites within biotechnological samples, while tandem mass isotopomer information is also accessible for a large number of analytes. Hence, the method outperforms previous approaches in terms of metabolite coverage, while also providing rich isotopomer information for a significant number of key metabolites. Moreover, the established work flow includes novel evaluation routines correcting for isotope interference of naturally distributed elements, which is crucial following derivatization of metabolites. Method validation in terms of trueness, precision, and limits of detection was performed, showing excellent analytical figures of merit with an overall maximum bias of 5.8%, very high precision for isotopologue and tandem mass isotopomer fractions representing >10% of total abundance, and absolute limits of detection in the femtomole range. The suitability of the developed method is demonstrated on a flux experiment of Pichia pastoris employing two different tracers, i.e., 1,6(13)C2-glucose and uniformly labeled (13)C-glucose.