RESUMEN
The constantly increasing demand of Rare Earth Elements (REEs) made them to be part of the so-called "critical elements" indispensable for the energy transition. The monopoly of only a few countries, the so-called balance problem between demand and natural abundance, and the need to limit the environmental costs of their mining, stress the necessity of a recycling policy of these elements. Different methods have been tested for REEs recovery. Despite the well-known ion-exchange properties of zeolites, just few preliminary works investigated their application for REEs separation and recycle. In this work we present a double ion exchange experiment on a NH4-13X zeolite, aimed at the recovery of different REEs from solutions mimicking the composition of liquors obtained from the leaching of spent fluorescent lamps. The results showed that the zeolite was able to exchange all the REEs tested, but the exchange capacity was different: despite Y being the more concentrated REE in the solutions, the cation exchange was lower than less concentrated ones (16 atoms p.u.c. vs 21 atoms for Ce and La solutions), suggesting a possible selectivity. In order to recover REEs from the zeolite, a second exchange with an ammonium solution was performed. The analyses of the zeolites show that almost all of Ce and Eu remain in the zeolite, while nearly half of La and Y are released. This, once again, suggests a possible selective release of REEs and open the possibility for a recovery process in which Rare Earths can be effectively separated.
Asunto(s)
Artículos Domésticos , Metales de Tierras Raras , Zeolitas , Metales de Tierras Raras/análisis , Minería , ReciclajeRESUMEN
Considering the increase in patients who suffer from osteoporosis and the bone defects that occur in these patients, bone tissue regeneration is a promising option to solve this problem. To achieve a synergistic effect between the synthesis of a proper structure and bioactive/pharmaceutical activity, ions with a physiological effect can be added to silica structures, such as Ca2+, thanks to its bioactive behavior, and Ga3+ for its antibacterial and anticancer action. In this work, the synthesis of large pore mesoporous silica (LPMS), potential bioactive glasses containing Ca2+ and Ga3+, has been studied. Corresponding structures, in terms of composition, have been synthesized following the Sol-Gel EISA (Evaporation Induced Self-Assembly) process (obtaining Classical Mesoporous Silica, MS). Pore structure characterization of LPMSs and MSs has been performed using N2 adsorption/desorption and Hg-porosimetry, showing the presence of pores for LPMSs in the range of 20-60 and 200-600 nm. Nisin, a polycyclic antibacterial peptide, has been used for load tests. The load and release tests performed highlight a higher loading and releasing, doubled for LPMSs if compared to MSs. To confirm the maintenance of the structure of LPMSs and their mechanical strength and resistance, scanning electron microscopy images were acquired before and after release tests. Ca and Ga release in SBF has been studied through inductively coupled plasma-optical emission spectroscopy (ICP-OES), showing a particularly high release of these ions performed with LPMSs. The bioactive behavior of Ca-containing structures has been confirmed using FT-IR (Fourier-transform infrared spectroscopy), SEM-EDS (Scanning Electron Microscope-Energy Dispersive Spectroscopy), and X-ray powder diffraction (XRDP). In conclusion, LPMSs showed better loading and releasing properties compared with classical MS and better release in terms of active ions. In addition, it has also been demonstrated that LPMSs have bioactive behavior (a well-known characteristic of MSs).
RESUMEN
The synthesis of a scaffold that can accommodate big molecules with a pharmaceutical role is important to shield them and maintain their biological activity. In this field, silica particles with large pores (LPMS) are innovative supports. Large pores allow for the loading of bioactive molecules inside the structure and contemporarily their stabilization and protection. These purposes cannot be achieved using classical mesoporous silica (MS, pore size 2-5 nm), because their pores are not big enough and pore blocking occurs. LPMSs with different porous structures are synthesized starting from an acidic water solution of tetraethyl orthosilicate reacting with pore agents (Pluronic® F127 and mesitylene), performing hydrothermal and microwave-assisted reactions. Time and surfactant optimization were performed. Loading tests were conducted using Nisin as a reference molecule (polycyclic antibacterial peptide, with dimensions of 4-6 nm); UV-Vis analyses on loading solutions were performed. For LPMSs, a significantly higher loading efficiency (LE%) was registered. Other analyses (Elemental Analysis, Thermogravimetric Analysis and UV-Vis) confirmed the presence of Nisin in all the structures and its stability when loaded on them. LPMSs showed a lower decrease in specific surface area if compared to MS; in terms of the difference in LE% between samples, it is explained considering the filling of pores for LPMSs, a phenomenon that is not allowed for MSs. Release studies in simulated body fluid highlight, only for LPMSs, a controlled release, considering the longer time scale of release. Scanning Electron Microscopy images acquired before and after release tests shows the LPMSs' maintenance of the structure, demonstrating strength and mechanical resistance of structures. In conclusion, LPMSs were synthesized, performing time and surfactant optimization. LPMSs showed better loading and releasing properties with respect to classical MS. All collected data confirm a pore blocking for MS and an in-pore loading for LPMS.
RESUMEN
Cancer is a leading cause of death worldwide, its genesis and progression are caused by homeostatic errors, and reactive oxygen species play a major role in promoting aberrant cancer homeostasis. In this scenario, curcumin could be an interesting candidate due to its versatile antioxidant, anti-inflammatory, anti-tumor, anti-HIV, and anti-infection properties. Nonetheless, the major problem related to its use is its poor oral bioavailability, which can be overcome by encapsulating it into small particles, such as hydrogel beads containing mesoporous silica. In this work, various systems have been synthesized: starting from mesoporous silica glasses (MGs), cerium-containing MGs have been produced; then, these systems have been loaded with 4 to 6% of curcumin. Finally, various MGs at different compositions have been included in alginate beads. In vitro studies showed that these hybrid materials enable the stabilization and effective delivery of curcumin and that a synergic effect can be achieved if Ce3+/Ce4+ and curcumin are both part of the beads. From swelling tests, it is possible to confirm a controlled curcumin release compartmentalized into the gastrointestinal tract. For all beads obtained, a curcumin release sufficient to achieve the antioxidant threshold has been reached, and a synergic effect of cerium and curcumin is observed. Moreover, from catalase mimetic activity tests, we confirm the well-known catalytic activity of the couple Ce3+/Ce4+. In addition, an extremely good radical scavenging effect of curcumin has been demonstrated. In conclusion, these systems, able to promote an enzymatic-like activity, can be used as drug delivery systems for curcumin-targeted dosing.
Asunto(s)
Alginatos , Antineoplásicos , Antioxidantes , Cerio , Curcumina , Alginatos/química , Antioxidantes/administración & dosificación , Cerio/administración & dosificación , Curcumina/administración & dosificación , Dióxido de Silicio/química , Antineoplásicos/administración & dosificación , Sistemas de Liberación de Medicamentos , HumanosRESUMEN
Curcumin is known for its therapeutic properties; among these, antioxidant, anti-inflammatory and anti-cancer ones stand out. Besides, curcumin metal complexes have shown widespread application in medicine and can be exploited as lead structures for developing metal-based drugs. Unfortunately, curcumin is poorly bioavailable, mainly due to its instability in physiological conditions; this weakness is tightly connected to the presence of the ß-diketo moiety undergoing tautomeric equilibrium. Stability and metal-chelating ability can be tuned by modulating the electronic effects and steric hindrance close to the ß-diketo moiety; in addition, formation of a metal complex shifts the tautomeric equilibrium towards the ß-keto-enol form and increases stability in biological media. Among the metals used in clinical therapy, gallium nitrate has shown to have significant antitumor activity against non-Hodgkin lymphoma and bladder cancer, thus indicating that gallium-based drugs have potential for further development as antineoplastic agents with improved therapeutic activity. Curcuminoids have demonstrated high affinity for gallium(III), allowing the formation of stable positively charged M:L 1:2 ß-diketonate complexes that benefit from the therapeutic activity of both the metal and the ligand. Seven new curcumin derivatives were synthesized and completely characterized. The new derivatives retain the solvent-dependent keto-enol tautomerism, with the prevalence of the diketo form in aqueous solution. Enhanced stability in simulated physiological conditions was observed in comparison to the lead compound curcumin. The presence of Ga3+ anticipates the dissociation of the enolic proton, allowing chelate complex formation, and simultaneously it shifts the tautomeric equilibrium towards the keto-enol form. A complete 1H/13C NMR and UV-Vis study was performed to define the metal-to-ligand stoichiometry ratio and the overall stability constants. In addition, we demonstrated that some of the derivatives have increased antiproliferative activity on colon cancer cells compared to curcumin and antioxidant properties. On the whole, the synthesized curcumin-based molecules may act as new gallium(III) chelators with improved stability with respect to curcumin and could open interesting perspectives for the development of novel therapeutic agents for cancer.
RESUMEN
Bioactive glasses (BGs) for biomedical applications are doped with therapeutic inorganic ions (TIIs) in order to improve their performance and reduce the side effects related to the surgical implant. Recent literature in the field shows a rekindled interest toward rare earth elements, in particular cerium, and their catalytic properties. Cerium-doped bioactive glasses (Ce-BGs) differ in compositions, synthetic methods, features, and in vitro assessment. This review provides an overview on the recent development of Ce-BGs for biomedical applications and on the evaluation of their bioactivity, cytocompatibility, antibacterial, antioxidant, and osteogenic and angiogenic properties as a function of their composition and physicochemical parameters.
Asunto(s)
Cerio , Antibacterianos/farmacología , Catálisis , Vidrio , OsteogénesisRESUMEN
(1) Background: a cell evaluation focused to verify the self-regenerative antioxidant activity is performed on cerium doped bioactive glasses. (2) Methods: the glasses based on 45S5 Bioglass®, are doped with 1.2 mol%, 3.6 mol% and 5.3 mol% of CeO2 and possess a polyhedral shape (~500 µm2). Glasses with this composition inhibit oxidative stress by mimicking catalase enzyme (CAT) and superoxide dismutase (SOD) activities; moreover, our previous cytocompatibility tests (neutral red (NR), 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and Bromo-2-deoxyUridine (BrdU)) reveal that the presence of cerium promotes the absorption and vitality of the cells. The same cytocompatibility tests were performed and repeated, in two different periods (named first and second use), separated from each other by four months. (3) Results: in the first and second use, NR tests indicate that the presence of cerium promotes once again cell uptake and viability, especially after 72 h. A decrease in cell proliferation it is observed after MTT and BrdU tests only in the second use. These findings are supported by statistically significant results (4) Conclusions: these glasses show enhanced proliferation, both in the short and in the long term, and for the first time such large dimensions are studied for this kind of study. A future prospective is the implantation of these bioactive glasses as bone substitute in animal models.
RESUMEN
Salen-type metal complexes have been actively studied for their nonlinear optical (NLO) properties, and push-pull compounds with charge asymmetry generated by electron releasing and withdrawing groups have shown promising results. As a continuation of our research in this field and aiming at solid-state features, herein we report on the synthesis of mononuclear copper(II) derivatives bearing either tridentate N2O Schiff bases L(a-c)- and pyridine as the forth ancillary ligand, [Cu(La-c)(py)](ClO4) (1a-c), or unsymmetrically-substituted push-pull tetradentate N2O2 Schiff base ligands, [Cu(5-A-5'-D-saldpen/chxn)] (2a-c), both derived from 5-substituted salicylaldehydes (sal) and the diamines (1R,2R)-1,2-diphenylethanediamine (dpen) and (1S,2S)-1,2-diaminocyclohexane (chxn). All compounds were characterized through elemental analysis, infrared and UV/visible spectroscopies, and mass spectrometry in order to guarantee their purity and assess their charge transfer properties. The structures of 1a-c were determined via single-crystal X-ray diffraction studies. The geometries of cations of 1a-c and of molecules 2a-c were optimized through DFT calculations. The solid-state NLO behavior was measured by the Kurtz-Perry powder technique @1.907 µm. All chiral derivatives possess non-zero quadratic electric susceptibility (χ(2)) and an efficiency of about 0.15-0.45 times that of standard urea.
RESUMEN
The cytocompatibility of potential bioactive cerium-containing (Ce3+/Ce4+) glasses is here investigated by preparing three different glasses with increasing amount of doping CeO2 (1.2, 3.6 and 5.3 mol% of CeO2, called BG_1.2, BG_3.6 and BG_5.3, respectively) based on 45S5 Bioglass® (called BG). These materials were characterized by Environmental Scanning Electron Microscopy (ESEM) and infrared spectroscopy (FTIR) after performing bioactivity tests in Dulbecco's Modified Eagle Medium (DMEM) solution, and the ions released in solution were determined by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and Optical Emission Spectrometry (ICP-OES). The data obtained clearly show that the glass surfaces of BG, BG_1.2 and BG_3.6 were covered by hydroxyapatite (HA), while BG_5.3 favored the formation of a cerium phosphate crystal phase. The cytotoxicity tests were performed using both murine long bone osteocyte-like (MLO-Y4) and mouse embryonic fibroblast (NIH/3T3) cell lines. The cerium-containing bioactive glasses show an increment in cell viability with respect to BG, and at long times, no cell aggregation and deformation were observed. The proliferation of NIH/3T3 cells increased with the cerium content in the glasses; in particular, BG_3.6 and BG_5.3 showed a higher proliferation of cells than the negative control. These results highlight and enforce the proposal of cerium-doped bioactive glasses as a new class of biomaterials for hard-tissue applications.
RESUMEN
The phosphors of formula Ba5Si8O21:Eu2+,Dy3+ were synthesized and studied in order to improve their properties. Their synthesis conditions were evaluated as a function of precursors, crucible composition, flux agents, dopants and temperatures. The samples were characterised by means of a systematic investigation through elemental, kinetic, mineralogical (both qualitative and quantitative), and morphological analysis. This study allows for a careful evaluation of the parameters that influence the formation and properties of Ba5Si8O21:Eu2+,Dy3+ phosphors. As for the synthesis conditions, the use of Na2SiO3, BaCO3 and NH4Cl as precursors was very important to reduce the temperature and time of synthesis. The reducing atmosphere produced with purified coal was cheaper and gave results similar to the more traditional gas mixture (H2/N2). At the end of this study, a phosphor with improved long persistent phosphorescence (LPP) characteristics was obtained with Ba/Si = 0.7, Eu/Si = 2.8 × 10-3 and Dy/Si = 3.6 × 10-3 following a 6 h-synthesis in a quartz crucible.
RESUMEN
The addition of cerium oxide to bioactive glasses, important materials for bone tissue regeneration, has been shown to induce multifunctionality, combining a significant bioactivity with antioxidant properties. We provide a real time investigation of the evolution of the electronic properties of highly diluted cerium ions in a liquid environment containing hydrogen peroxide - the most abundant reactive oxygen species in living cells. This challenging task is undertaken by means of high-energy resolution fluorescence detected by X-ray absorption near-edge spectroscopy at the Ce L3 edge. We investigate samples with variable compositions and different morphologies. We relate the observed spectroscopic changes not only to variations in the concentration of the two Ce oxidation states in the samples, but also to changes in the local atomic environment of Ce ions, providing a clear picture of the role of cerium ions in the dissociation of hydrogen peroxide. The obtained results contribute to the understanding of the mechanisms that come into play in the process and provide a basis for the optimization of the functionalities of this class of materials.
Asunto(s)
Cerio/química , Peróxido de Hidrógeno/química , Catálisis , Vidrio/química , Espectrometría de FluorescenciaRESUMEN
Beneficial effects in bone cell growth and antibacterial action are currently attributed to Ga3+ ions. Thus, they can be used to upgrade mesoporous bioactive glasses (MBGs), investigated for tissue engineering, whenever they released therapeutic amounts of gallium ions to the surrounding medium. Three gallium-enriched MBGs with composition (in mol %) xSiO2-yCaO-zP2O5-5Ga2O3, being x = 70, y = 15, z = 10 for Ga_1; x = 80, y = 12, z = 3 for Ga_2; and x = 80, y = 15, z = 0 for Ga_3, were investigated and compared with the gallium-free 80SiO2-15CaO-5P2O5 MBG (B). 29Si and 31P MAS NMR analyses indicated that Ga3+ acts as network modifier in the glass regions with higher polymerization degree and as network former in the zones with high concentration of classical modifiers (Ca2+ ions). Ga_1 and Ga_2 exhibited a quick in vitro bioactive response because they were coated by an apatite-like layer after 1 and 3 days in simulated body fluid. Although we have not conducted biological tests in this paper (cells or bacteria), Ga_1 released high but non-cytotoxic amounts of Ga3+ ions in Todd Hewitt Broth culture medium that were 140 times higher than the IC90 of Pseudomonas aeruginosa bacteria, demonstrating its potential for tissue engineering applications.
RESUMEN
In this paper, we report the study of the loading and the release of curcuminoids by bioactive glasses (BG) and mesoporous bioactive glasses (MBG). Through a detailed spectroscopic study, it was possible to determine the amount and the type of molecules released in water and in simulated body fluid (SBF). In particular, curcumin and K2T21 show a good ability to be released in di-keto and keto-enolic form, depending from the pH. However, after 24 h, the amount of pristine curcumin release is very low with a consequent increment of degradation products derived by curcuminoids. The presence of -OH groups on curcuminoids is a fundamental pre-requisite in order to obtain a high loading and release in polar solution such as water and SBF. The substrate on which we loaded the drugs does not seem to affect significantly the loading and the release of the drugs. The environment, instead, affects the release: for all the drugs, the release in SBF, buffered at pH of 7.4, is slightly worse than the release in water (basic pH values).
RESUMEN
The ability of Ce-containing bioactive glasses to inhibit oxidative stress in terms of reduction of hydrogen peroxide, by mimicking the catalase enzyme activity is demonstrated here for the first time. The antioxidant properties of three bioactive glasses containing an increasing amount of CeO2 have been evaluated by following the degradation of hydrogen peroxide with time after immersion in H2O2 aqueous solutions with different concentration. XPS and UV-vis measurements allowed us to determine the Ce(3+)/Ce(4+) ratio in the bulk and on the glass surface, and to correlate it with the ability of the samples to show catalase mimetic activity. Interestingly, we have found that the bioactive glass with composition 23.2Na2O-25.7CaO-43.4SiO2-2.4P2O5-5.3CeO2 immersed in 0.1 M H2O2 aqueous solution is able to degrade 90% of it in 1 week. The reduction in bioactivity of the glasses with increasing CeO2 content is here rationalized in terms of a lower amount of phosphate groups available for the hydroxyapatite layer formation, after binding with cerium ions. In fact, classical molecular dynamics simulations revealed that the addition of CeO2 leads to the formation of cerium phosphate rich regions. The formation of an insoluble CePO4 crystalline phase is also observed by XRD analysis after thermal treatment of the glass samples.
Asunto(s)
Materiales Biocompatibles/química , Cerio/química , Fosfatos/química , Materiales Biocompatibles/metabolismo , Catalasa/metabolismo , Durapatita/química , Vidrio/química , Peróxido de Hidrógeno/química , Peróxido de Hidrógeno/metabolismo , Simulación de Dinámica Molecular , Oxidación-Reducción , Espectrofotometría UltravioletaRESUMEN
Bioceramics, such as silica-based glasses, are widely used in bone and teeth restoration. Nowadays, the association between nanotechnology and pharmacology is one of the most promising research fields in cancer therapy. The advanced processing methods and new chemical strategies allow the incorporation of drugs within them or on their functionalized surfaces. Bioceramics can act as local drug delivery systems to treat bone and teeth diseases. The present paper reports data related to the development of a pH-stimuli responsive bioactive glass. The glass conjugation with 5-aminofluorescein (5-AF), through a pH-sensitive organic spacer, allows to produce a pH-responsive bioactive biomaterial: when it is exposed to specific pH changes, it can favour the release of 5-AF directly at the target site. 5-AF has been chosen as a simple, low cost, non toxic model to simulate doxorubicin, an anticancer drug. As doxorubicin, 5-AF contains an amino group in its structure in order to form an amide bond with the carboxylic functionalities of the glass. Raman spectroscopy and thermal analysis confirm the glass conjugation of 5-AF by means of an amide bond; the amount of 5-AF loaded was very high (≈ 65 and 44 wt%). The release tests at two different pH (4.2 and 7.4) show that the amount of released 5-AF is higher at acid pH with respect to physiological one. This preliminary datum evidenced that a pH-sensitive drug delivery system has been developed. The low amount of 5-AF released (<1 wt% of the total 5-AF) is due to the very low solubility of 5-AF in aqueous medium. This disadvantage, may be overcome in a dynamic environment (physiological conditions), where it is possible to obtain a drug release system ensuring an effective therapeutic dose for long times and, at the same time, avoiding the drug toxicity.
Asunto(s)
Materiales Biocompatibles/síntesis química , Portadores de Fármacos/síntesis química , Fluoresceínas/química , Vidrio/química , Sondas Moleculares/síntesis química , Materiales Biocompatibles/química , Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos , Concentración de Iones de Hidrógeno , Maleatos/química , Anhídridos Maleicos/química , Sondas Moleculares/química , Propilaminas , Silanos/química , Estimulación QuímicaRESUMEN
The aim of the present contribution is to prepare a functionalized bioactive glass potentially useful as prosthetic material, but also able to release organic molecules in response to a change of the pH environment. By this approach it is possible to develop devices which can be used for a triggered drug release in response to specific stimuli; this is an attractive research field, in order to avoid either systemic and/or local toxic effects of drugs. In particular, in the present paper we report data related to the development of a new formulation of bioactive glasses, their functionalization with organic molecules to obtain a pH-sensitive bond, their physicochemical characterization and in vitro bioactivity in simulated biological fluids (SBF), and organic molecule delivery tests at different pH. The glass functionalization, by means of a covalent reaction, allows us to produce a model of pH-responsive bioactive biomaterial: when it is exposed to specific pH changes, it can favor the release of the organic molecules directly at the target site. Cysteamine and 5-aminofluorescein are used as model molecules to simulate a drug. The materials, before and after the different functionalization steps and in vitro release tests at different pH, have been characterized by means of different experimental techniques such as X-ray powder diffraction (XRPD), Raman, FTIR and fluorescence spectroscopies, N2 adsorption, thermogravimetric (TGA) and elemental analysis.
Asunto(s)
Materiales Biocompatibles/química , Sistemas de Liberación de Medicamentos/métodos , Vidrio/química , Animales , Enfermedades Óseas/tratamiento farmacológico , Cisteamina/química , Fluoresceínas/química , Humanos , Concentración de Iones de HidrógenoRESUMEN
Zn2+ ions exhibit osteogenic, angiogenic and antimicrobial properties. For this reason, they are often added in small amounts to bioceramics being investigated for bone tissue engineering. In this paper, the cytocompatibility and antibacterial properties of 80% SiO2-15% CaO-5% P2O5 (mol%) mesoporous bioactive glass (MBG) scaffolds substituted with 4.0% and 7.0% of ZnO were studied and compared with the Zn-free scaffold. Cell proliferation, morphology, differentiation and cytotoxic effects of Zn2+ ions released from the samples were examined by culturing human osteoblast-like cells (HOS) osteoblasts both in the presence of sample extracts and on the scaffold surface. The bacterial inhibition capacity of the scaffolds was explored by using Gram-positive Stapylococcus aureus bacteria, responsible for numerous infections in orthopedic surgery, to simulate a severe infection. Our results show that the Zn-MBG scaffolds possess a hierarchical meso-macropore structure suitable for osteoblast growth. Furthermore, the amount of Zn2+ released from the scaffold with 4.0% ZnO was found to be more favorable for HOS cell development than that released from the scaffold including 7.0% ZnO. Zn2+ released to the medium from both scaffolds exhibited antibacterial properties against S. aureus. Thus, the cytocompatibility and the antibacterial ability exhibited by the MBG scaffold containing 4.0% ZnO make it a suitable candidate for bone regeneration applications.
RESUMEN
A series of Sr-substituted hydroxyapatites (HA), of general formula Ca(10-x)Srx(PO4)6(OH)2, where x=2 and 4, were synthesized by solid state methods and characterized extensively. The reactivity of these materials in cell culture medium was evaluated, and the behavior towards MG-63 osteoblast cells (in terms of cytotoxicity and proliferation assays) was studied. Future in vivo studies will give further insights into the behavior of the materials. A paper by Lagergren et al. (1975), concerning Sr-substituted HA prepared by a solid state method, reports that the presence of Sr in the apatite composition strongly influences the apatite diffraction patterns. Zeglinsky et al. (2012) investigated Sr-substituted HA by ab initio methods and Rietveld analyses and reported changes in the HA unit cell volume and shape due to the Sr addition. To further clarify the role played by the addition of Sr on the physico-chemical properties of these materials we prepared Sr-substituted HA compositions by a solid state method, using different reagents, thermal treatments and a multi-technique approach. Our results indicated that the introduction of Sr at the levels considered here does influence the structure of HA. There is also evidence of a decrease in the crystallinity degree of the materials upon Sr addition. The introduction of increasing amounts of Sr into the HA composition causes a decrease in the specific surface area and an enrichment of Sr-apatite phase at the surface of the samples. Bioactivity tests show that the presence of Sr causes changes in particle size and/or morphology during soaking in MEM solution; on the contrary the morphology of pure HA does not change after 14 days of reaction. The presence of Sr, as Sr-substituted HA and SrCl2, in cultures of human MG-63 osteoblasts did not produce any cytotoxic effect. In fact, Sr-substituted HA increased the proliferation of osteoblast cells and enhanced cell differentiation: Sr in HA has a positive effect on MG-63 cells. In contrast, Sr ions alone, at the concentrations released by Sr-HA (1.21-3.24 ppm), influenced neither cell proliferation nor differentiation. Thus the positive effects of Sr in Sr-HA materials are probably due to the co-action of other ions such as Ca and P.
Asunto(s)
Materiales Biocompatibles/farmacología , Durapatita/química , Durapatita/farmacología , Osteoblastos/citología , Osteoblastos/efectos de los fármacos , Estroncio/farmacología , Fosfatasa Alcalina/metabolismo , Proliferación Celular/efectos de los fármacos , Cristalización , Durapatita/síntesis química , Humanos , L-Lactato Deshidrogenasa/metabolismo , Microscopía Electrónica de Rastreo , Osteoblastos/enzimología , Fósforo/análisis , Espectroscopía de Fotoelectrones , Polvos , Espectrometría por Rayos X , Espectrofotometría Atómica , Espectroscopía Infrarroja por Transformada de Fourier , Espectrometría Raman , Difracción de Rayos XRESUMEN
A gallium containing glass 45.7SiO2·24.1Na2O·26.6CaO·2.6P2O5·1.0Ga2O3 (referred to as "Ga1.0") and a parent Ga-free glass 46.2SiO2·24.3Na2O·26.9CaO·2.6P2O5 (hereinafter represented as "H"), corresponding to Bioglass® 45S5, were functionalized with Tetraethoxysilane (TEOS) and (3-Aminopropyl)triethoxysilane (APTS) in order to improve their ability to bond with biomolecules, such as drugs, proteins, and peptides. Functionalization with TEOS and APTS promoted the increment in OH groups and formation of NH2 groups on the glass surface, respectively. The presence of OH or NH2 groups was investigated by means of IR spectroscopy and elemental analysis. Moreover, in vitro study of these functionalized glasses was performed in simulated body fluid (SBF) so as to investigate the effect of functionalization on the bioactive behavior of H and Ga1.0. The results showed that the functionalization was obtained along with maintaining their bioactivity. The surfaces of both functionalized glasses were covered by a layer of apatite within 30 days of SBF immersion. In addition, CaCO3 was also identified on the surface of APTS functionalized glasses. However, no gallium release was detected during SBF soaking.