RESUMEN
Methods to repair bone defects arising from trauma, resection, or disease, continue to be sought after. Cyclic mechanical loading is well established to influence bone (re)modelling activity, in which bone formation and resorption are correlated to micro-scale strain. Based on this, the application of mechanical stimulation across a bone defect could improve healing. However, if ignoring the mechanical integrity of defected bone, loading regimes have a high potential to either cause damage or be ineffective. This study explores real-time finite element (rtFE) methods that use three-dimensional structural analyses from micro-computed tomography images to estimate effective peak cyclic loads in a subject-specific and time-dependent manner. It demonstrates the concept in a cyclically loaded mouse caudal vertebral bone defect model. Using rtFE analysis combined with adaptive mechanical loading, mouse bone healing was significantly improved over non-loaded controls, with no incidence of vertebral fractures. Such rtFE-driven adaptive loading regimes demonstrated here could be relevant to clinical bone defect healing scenarios, where mechanical loading can become patient-specific and more efficacious. This is achieved by accounting for initial bone defect conditions and spatio-temporal healing, both being factors that are always unique to the patient.
Asunto(s)
Cóccix/lesiones , Curación de Fractura/fisiología , Fracturas de la Columna Vertebral/fisiopatología , Estrés Mecánico , Soporte de Peso/fisiología , Adaptación Fisiológica/fisiología , Animales , Cóccix/diagnóstico por imagen , Modelos Animales de Enfermedad , Femenino , Análisis de Elementos Finitos , Humanos , Ratones Endogámicos C57BL , Osteogénesis/fisiología , Fracturas de la Columna Vertebral/diagnóstico por imagen , Cola (estructura animal) , Microtomografía por Rayos X/métodosRESUMEN
It is well-established that cyclic, but not static, mechanical loading has anabolic effects on bone. However, the function describing the relationship between the loading frequency and the amount of bone adaptation remains unclear. Using a combined experimental and computational approach, this study aimed to investigate whether trabecular bone mechano-regulation is controlled by mechanical signals in the local in vivo environment and dependent on loading frequency. Specifically, by combining in vivo micro-computed tomography (micro-CT) imaging with micro-finite element (micro-FE) analysis, we monitored the changes in microstructural as well as the mechanical in vivo environment [strain energy density (SED) and SED gradient] of mouse caudal vertebrae over 4 weeks of either cyclic loading at varying frequencies of 2, 5, or 10 Hz, respectively, or static loading. Higher values of SED and SED gradient on the local tissue level led to an increased probability of trabecular bone formation and a decreased probability of trabecular bone resorption. In all loading groups, the SED gradient was superior in the determination of local bone formation and resorption events as compared to SED. Cyclic loading induced positive net (re)modeling rates when compared to sham and static loading, mainly due to an increase in mineralizing surface and a decrease in eroded surface. Consequently, bone volume fraction increased over time in 2, 5, and 10 Hz (+15%, +21% and +24%, p ≤ 0.0001), while static loading led to a decrease in bone volume fraction (-9%, p ≤ 0.001). Furthermore, regression analysis revealed a logarithmic relationship between loading frequency and the net change in bone volume fraction over the 4 week observation period (R 2 = 0.74). In conclusion, these results suggest that trabecular bone adaptation is regulated by mechanical signals in the local in vivo environment and furthermore, that mechano-regulation is logarithmically dependent on loading frequency with frequencies below a certain threshold having catabolic effects, and those above anabolic effects. This study thereby provides valuable insights toward a better understanding of the mechanical signals influencing trabecular bone formation and resorption in the local in vivo environment.
RESUMEN
PURPOSE OF REVIEW: Connecting organ-scale loads to cellular signals in their local in vivo environment is a current challenge in the field of bone (re)modelling. Understanding this critical missing link would greatly improve our ability to anticipate mechanotransduction during different modes of stimuli and the resultant cellular responses. This review characterises computational approaches that could enable coupling links across the multiple scales of bone. RECENT FINDINGS: Current approaches using strain and fluid shear stress concepts have begun to link organ-scale loads to cellular signals; however, these approaches fail to capture localised micro-structural heterogeneities. Furthermore, models that incorporate downstream communication from osteocytes to osteoclasts, bone-lining cells and osteoblasts, will help improve the understanding of (re)modelling activities. Incorporating this potentially key information in the local in vivo environment will aid in developing multiscale models of mechanotransduction that can predict or help describe resultant biological events related to bone (re)modelling. Progress towards multiscale determination of the cell mechanical environment from organ-scale loads remains elusive. Construction of organ-, tissue- and cell-scale computational models that include localised environmental variation, strain amplification and intercellular communication mechanisms will ultimately help couple the hierarchal levels of bone.
Asunto(s)
Remodelación Ósea/fisiología , Comunicación Celular/fisiología , Mecanotransducción Celular/fisiología , Osteoblastos/fisiología , Osteoclastos/fisiología , Osteocitos/fisiología , Estrés Mecánico , Soporte de Peso/fisiología , Animales , Fenómenos Biomecánicos , Huesos/citología , Huesos/metabolismo , Huesos/fisiología , Humanos , Modelos Biológicos , Osteoblastos/metabolismo , Osteoclastos/metabolismo , Osteocitos/metabolismo , Transducción de Señal , Análisis de SistemasRESUMEN
Calcium phosphates (CaPs) are among the most utilized synthetic biomaterials for bone regeneration, largely owing to their established osteoconductive and osteoinductive properties. While angiogenesis is a crucial prerequisite to bone formation, research and applications for CaPs have not appreciated its crucial role. This review discusses how CaPs influence angiogenesis, and highlights promising strategies that address this topic. The objective is to draw attention to the gap in the literature and to highlight the importance of angiogenesis in CaP research, development, and use.
Asunto(s)
Regeneración Ósea/fisiología , Fosfatos de Calcio , Neovascularización Fisiológica , Ingeniería de Tejidos , Animales , Humanos , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/fisiología , Ratones , Ingeniería de Tejidos/métodos , Ingeniería de Tejidos/tendenciasRESUMEN
Bone healing requires two critical mechanisms, angiogenesis and osteogenesis. In order to improve bone graft substitutes, both mechanisms should be addressed simultaneously. While the individual effects of various bioinorganics have been studied, an understanding of the combinatorial effects is lacking. Cobalt and fluoride ions, in appropriate concentrations, are known to individually favor the vascularization and mineralization processes, respectively. This study investigated the potential of using a combination of fluoride and cobalt ions to simultaneously promote osteogenesis and angiogenesis in human mesenchymal stromal cells (hMSCs). Using a two-step biomimetic method, wells of tissue culture plates were coated with a calcium phosphate (CaP) layer without or with the incorporation of cobalt, fluoride, or both. In parallel, hMSCs were cultured on uncoated well plates, and cultured with cobalt and/or fluoride ions within the media. The results revealed that cobalt ions increased the expression of angiogenic markers, with the effects being stronger when the ions were added as a dissolved salt in cell medium as compared to incorporation into CaP. Cobalt ions generally suppressed the ALP activity, the expression of osteogenic genes, and the level of mineralization, regardless of delivery method. Fluoride ions, individually or in combination with cobalt, significantly increased the expression of many of the selected osteogenic markers, as well as mineral deposition. This study demonstrates an approach to simultaneously target the two essential mechanisms in bone healing: angiogenesis and osteogenesis. The incorporation of cobalt and fluoride into CaPs is a promising method to improve the biological performance of fully synthetic bone graft substitutes.
Asunto(s)
Fosfatos de Calcio/administración & dosificación , Cobalto/administración & dosificación , Fluoruros/administración & dosificación , Células Madre Mesenquimatosas/citología , Neovascularización Fisiológica/fisiología , Osteogénesis/fisiología , Inductores de la Angiogénesis/administración & dosificación , Sustitutos de Huesos/administración & dosificación , Sustitutos de Huesos/química , Fosfatos de Calcio/química , Diferenciación Celular/efectos de los fármacos , Diferenciación Celular/fisiología , Células Cultivadas , Cobalto/química , Técnicas Químicas Combinatorias , Fluoruros/química , Humanos , Ensayo de Materiales , Células Madre Mesenquimatosas/efectos de los fármacos , Células Madre Mesenquimatosas/fisiología , Neovascularización Fisiológica/efectos de los fármacos , Osteogénesis/efectos de los fármacosRESUMEN
The incorporation of bioinorganics into synthetic biomaterials is a promising approach to improve the biological performance of bone graft substitutes, while still retaining their synthetic nature. Among these bioinorganics, strontium ions (Sr(2+) ) have reported enhanced bone formation, and a reduced risk of bone fractures. While previous results have been encouraging, more detailed studies are needed to further develop specific applications. This study demonstrates the effects of Sr(2+) on the osteogenic differentiation of human mesenchymal stromal cells (hMSCs) when introduced as either a dissolved salt, or incorporated into biomimetic calcium phosphate (CaP) coatings. Upon attachment, hMSCs seeded in the presence of higher Sr(2+) concentrations presented with a more elongated shape as compared to the controls without Sr(2+) . Both Sr(2+) as a dissolved salt in the medium, or incorporated into CaP coatings, positively influenced hMSC alkaline phosphatase (ALP) activity in a dose-dependent manner. At the mRNA level, the expression of osteogenic markers ALP, bone sialoprotein, bone morphogenetic protein 2, osteopontin, and osteoclacin were increased in the presence of Sr(2+) , independent of the delivery method. Overall, this study demonstrates the positive effects of strontium on the osteogenic differentiation of human MSCs, and supports the use of strontium-incorporated CaPs for bone regeneration applications. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1946-1960, 2016.
Asunto(s)
Materiales Biomiméticos/farmacología , Fosfatos de Calcio/farmacología , Células Madre Mesenquimatosas/citología , Estroncio/farmacología , Fosfatasa Alcalina/metabolismo , Biomarcadores/metabolismo , Forma de la Célula/efectos de los fármacos , Células Cultivadas , Materiales Biocompatibles Revestidos/farmacología , ADN/metabolismo , Regulación de la Expresión Génica/efectos de los fármacos , Humanos , Iones , Células Madre Mesenquimatosas/efectos de los fármacos , Células Madre Mesenquimatosas/metabolismo , Minerales/química , Osteogénesis/genética , ARN Mensajero/genética , ARN Mensajero/metabolismo , Espectrometría por Rayos X , Espectrofotometría Atómica , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
On activation, platelets secrete an array of growth factors that contribute to bone regeneration. Combining platelet-rich plasma (PRP) with bone graft substitutes has the potential to reduce or replace the reliance on autografts. Lack of standardization and improper use may contribute to the conflicting outcomes reported within both preclinical and clinical investigations using PRP. This study investigates the effect of PRP dose on bone augmentation. Eighty critical-sized defects were created in the cancellous bone of the medial proximal tibia and the distal femur of 20 five-year-old female sheep. The defects were treated with three doses of an autologous thrombin-activated PRP combined with a biphasic calcium phosphate (BCP) or autograft and empty defects. Radiography, micro-computed tomography, histology, histomorphometry, and fluorochrome bone labels were examined at 4 weeks. The empty defects did not spontaneously heal. The highest dose of PRP treatment had a significantly greater micro-CT bone volume/total volume compared with the BCP alone (PRP: 30.6%±1.8%; BCP: 24.5%±0.1%). All doses of PRP treatment were significantly greater than the BCP alone for histomorphometric new bone area (PRP: 14.5%±1.3%; BCP: 9.7%±1.5%) and bone ingrowth depth (PRP: 2288±210 µm; BCP:1151±268 µm). From week 2 onward, PRP had a significant effect on the weekly bone ingrowth compared with BCP; however, autografts had the highest amount of weekly fluorescent bone labeling. PRP induces new bone formation with a dose-dependent response at 4 weeks when used with a BCP in sheep.
Asunto(s)
Regeneración Ósea/efectos de los fármacos , Fémur , Hemostáticos/farmacología , Plasma Rico en Plaquetas , Trombina/farmacología , Tibia , Animales , Relación Dosis-Respuesta a Droga , Femenino , Fémur/lesiones , Fémur/metabolismo , Fémur/patología , Ovinos , Tibia/lesiones , Tibia/metabolismo , Tibia/patologíaRESUMEN
Appropriate well-characterized bone defect animal models remain essential for preclinical research. This pilot study demonstrates a relevant animal model for cancellous bone defect healing. Three different defect diameters (8, 11, 14 mm) of fixed depth (25 mm) were compared in both skeletally immature (18-month-old) and aged sheep (5-year-old). In each animal, four defects were surgically created and placed in the cancellous bone of the medial distal femoral and proximal tibial epiphyses bilaterally. Animals were euthanized at 4 weeks post-operatively to assess early healing and any biological response. Defect sites were graded radiographically, and new bone formation quantified using µCT and histomorphometry. Fibrous tissue was found within the central region in most of the defects with woven bone normally forming near the periphery of the defect. Bone volume fraction [bone volume (BV)/TV] significantly decreased with an increasing defect diameter. Actual BV, however, increased with defect diameter. Bone ingrowth was lower for all defect diameters in the aged group. This pilot study proposes that the surgical creation of 11 mm diameter defects in the proximal tibial and distal femoral epiphyses of aged sheep is a suitable large animal model to study early healing of cancellous bone defects. The refined model allows for the placement of four separate bone defects per animal and encourages a reduction in animal numbers required for preclinical research.
RESUMEN
The increased concentration of platelets within platelet-rich plasma (PRP) provides a vehicle to deliver supra-physiologic concentrations of growth factors to an injury site, possibly accelerating or otherwise improving connective tissue regeneration. This potential benefit has led to the application of PRP in several applications; however, inconsistent results have limited widespread adoption in bone healing. This review provides a core understanding of the bone healing mechanisms, and corresponds this to the factors present in PRP. In addition, the current state of the art of PRP preparation, the key aspects that may influence its effectiveness, and treatment outcomes as they relate specifically to bone defect healing are presented. Although PRP does have a sound scientific basis, its use for bone healing appears only beneficial when used in combination with osteoconductive scaffolds; however, neither allograft nor autograft appear to be appropriate carriers. Aggressive processing techniques and very high concentrations of PRP may not improve healing outcomes. Moreover, many other variables exist in PRP preparation and use that influence its efficacy; the effect of these variables should be understood when considering PRP use. This review includes the essentials of what has been established, what is currently missing in the literature, and recommendations for future directions.