RESUMEN
Electrification to reduce or eliminate greenhouse gas emissions is essential to mitigate climate change. However, a substantial portion of our manufacturing and transportation infrastructure will be difficult to electrify and/or will continue to use carbon as a key component, including areas in aviation, heavy-duty and marine transportation, and the chemical industry. In this Roadmap, we explore how multidisciplinary approaches will enable us to close the carbon cycle and create a circular economy by defossilizing these difficult-to-electrify areas and those that will continue to need carbon. We discuss two approaches for this: developing carbon alternatives and improving our ability to reuse carbon, enabled by separations. Furthermore, we posit that co-design and use-driven fundamental science are essential to reach aggressive greenhouse gas reduction targets.
RESUMEN
Carbon capture, utilization and storage is a key yet cost-intensive technology for the fight against climate change. Single-component water-lean solvents have emerged as promising materials for post-combustion CO2 capture, but little is known regarding their mechanism of action. Here we present a combined experimental and modelling study of single-component water-lean solvents, and we find that CO2 capture is accompanied by the self-assembly of reverse-micelle-like tetrameric clusters in solution. This spontaneous aggregation leads to stepwise cooperative capture phenomena with highly contrasting mechanistic and thermodynamic features. The emergence of well-defined supramolecular architectures displaying a hydrogen-bonded internal core, reminiscent of enzymatic active sites, enables the formation of CO2-containing molecular species such as carbamic acid, carbamic anhydride and alkoxy carbamic anhydrides. This system extends the scope of adducts and mechanisms observed during carbon capture. It opens the way to materials with a higher CO2 storage capacity and provides a means for carbamates to potentially act as initiators for future oligomerization or polymerization of CO2.
RESUMEN
The study reports on a simple system to fabricate skin substitutes consisting of a naturally occurring bacterial polysaccharide gellan gum. Gelation was driven by the addition of a culture medium whose cations induced gellan gum crosslinking at physiological temperature, resulting in hydrogels. Human dermal fibroblasts were incorporated in these hydrogels and their mechanical, morphological, and penetration characteristics were studied. The mechanical properties were determined by means of oscillatory shear rheology, and a short linear viscoelastic regime was noted up to less than 1% of strain amplitude. The storage modulus increased with an increasing polymer concentration. The moduli were in the range noted for native human skin. After 2 weeks of fibroblast cultivation, the storage moduli showed signs of deterioration, so that a culture time of 2 weeks was proposed for further studies. Microscopic and fluorescent staining observations were documented. These depicted a crosslinked network structure in the hydrogels with a homogeneous distribution of cells and an assured cell viability of 2 weeks. H&E staining was also performed, which showed some traces of ECM formation in a few sections. Finally, caffeine penetration experiments were carried out with Franz diffusion cells. The hydrogels with a higher concentration of polymer containing cells showed an improved barrier function against caffeine compared to previously studied multicomponent hydrogels as well as commercially available 3D skin models. Therefore, these hydrogels displayed both mechanical and penetration compatibility with the ex vivo native human skin.
Asunto(s)
Piel Artificial , Piel , Humanos , Masculino , Adulto Joven , Células Cultivadas , Hidrogeles/química , Viscosidad , Femenino , Adolescente , Adulto , Persona de Mediana Edad , Supervivencia CelularRESUMEN
Efficient direct air capture (DAC) of CO2 will require strategies to deal with the relatively low concentration in the atmosphere. One such strategy is to employ the combination of a CO2 -selective membrane coupled with a CO2 capture solvent acting as a draw solution. Here, the interactions between a leading water-lean carbon-capture solvent, a polyether ether ketone (PEEK)-ionene membrane, CO2 , and combinations were probed using advanced NMR techniques coupled with advanced simulations. We identify the speciation and dynamics of the solvent, membrane, and CO2 , presenting spectroscopic evidence of CO2 diffusion through benzylic regions within the PEEK-ionene membrane, not spaces in the ionic lattice as expected. Our results demonstrate that water-lean capture solvents provide a thermodynamic and kinetic funnel to draw CO2 from the air through the membrane and into the bulk solvent, thus enhancing the performance of the membrane. The reaction between the carbon-capture solvent and CO2 produces carbamic acid, disrupting interactions between the imidazolium (Im+ ) cations and the bistriflimide anions within the PEEK-ionene membrane, thereby creating structural changes through which CO2 can diffuse more readily. Consequently, this restructuring results in CO2 diffusion at the interface that is faster than CO2 diffusion in the bulk carbon-capture solvent.
Asunto(s)
Dióxido de Carbono , Agua , Solventes/química , Agua/química , Dióxido de Carbono/química , PolietilenglicolesRESUMEN
This work describes the synthetic approaches, spectroscopic and thermal characterization of aramid polymers prepared from waste polyethylene terephthalate (PET) via sustainable and scalable processes. Direct depolymerization of PET with aliphatic diamines under melt conditions resulted in decomposition without substantial formation of any aramid polymer. The Higashi-Ogata methodology or direct polycondensation of terephthalic acid (TPA) derived from PET waste and p-phenylenediamine, resulted in oligomerization and formation of aramids with a low degree of polymerization. The highest molecular weight polymers were obtained via the acid chloride of TPA, the traditional method. A proprietary solvent enabled the dissolution of most polymers and subsequent size exclusion chromatography analysis in the same solvent. We emphasize that although the soluble polymer compounds are prepared via the traditional route, they are novel. The apparent molecular weights of the soluble polymers ranged between 10-35 kDa (M n ) and 28-81 kDa (M w ). All analogues were prepared with commercially available diamines and diamine combinations. The obtained solid powders were dissolved in D2SO4 and analyzed spectroscopically to qualitatively evaluate the degrees of polymerization, while the solids were characterized via thermogravimetric analysis and differential scanning calorimetry. Many reaction conditions were employed to improve the solution polycondensation reaction, and it was found that addition of pyridine (2 eq) to the NMP reaction medium was crucial in preventing the precipitation of the polymer. Contrary to conventional wisdom, CaCl2 did not play a crucial role in the molecular weight increase of the polymer when oxydianiline was used. Our data indicated that the temperature and absence of CaCl2 provided a boost in molecular weight. Both room temperature and 0 °C reactions generated similar polymers as suggested by nuclear magnetic resonance; however, the cold conditions enhanced gel formation, an important attribute in the future processing of these materials to obtain fibers. All analogues had a high degradation temperature at 5 and 10% weight loss (5% and T10%), above 400 °C, along with high percent char values. A glass transition (T g) was not detected in any of the analogues prepared.
RESUMEN
A combined experimental and theoretical study has been carried out on the wetting and reactivity of water-lean carbon capture solvents on the surface of common column packing materials. Paradoxically, these solvents are found to be equally able to wet hydrophobic and hydrophilic surfaces. The solvents are amphiphilic and can adapt to any interfacial environment, owing to their inherent heterogeneous (nonionic/ionic) molecular structure. Ab initio molecular dynamics indicates that these structures enable the formation of a strong adlayer on the surface of hydrophilic surfaces like oxidized steel which promotes solvent decomposition akin to hydrolysis from surface oxides and hydroxides. This decomposition passivates the surface, making it effectively hydrophobic, and the decomposed solvent promotes leaching of the iron into the bulk fluid. This study links the wetting behavior to the observed corrosion of the steels by decomposition of solvent at steel interfaces. The overall affect is strongly dependent on the chemical composition of the solvent in that amines are stable, whereas imines and alcohols are not. Moreover, plastic packing shows little to no solvent degradation, but an equal degree of wetting.
RESUMEN
We report a custom-made technique to synthesize process-convenient skin scaffolds by tuning the mechanical properties of hydrogels based on a few naturally occurring polysaccharides to match the rheological properties of previously established benchmarks, i.e., the ex vivo native human skins. We studied the mechanical parameters using oscillatory shear rheology. At small strain amplitudes, the intrinsic elastic modulus showed an almost linear dependence in the middle and a changing rate profile at the two ends with concentration of the principal hydrogel component variant, i.e., kappa (κ)-carrageenan. At large strain amplitudes, the hydrogels demonstrated intercycle strain-softening behavior, the onset of which was directly proportional to the κ-carrageenan concentration. We observed a concentration match for the intrinsic elastic modulus of the benchmark within this sigmoidal curve fit. Contextually, we need to explore other potent polymeric hydrogel systems to achieve mechanical affinity in terms of multiple rheological parameters derived from both strain amplitude and angular frequency sweeps. Additionally, we carried out diffusion experiments to study caffeine permeation attributes. The hydrogels show improved barrier features with increasing κ-carrageenan concentration. In terms of the penetration flux and total cumulative amount of permeated caffeine, this enhanced mechanical adherence demonstrates comparable penetration features with the commercial 3D skin model.
Asunto(s)
Hidrogeles , Polisacáridos , Carragenina , Humanos , Reología , PielRESUMEN
Water-lean CO2 capture solvents show promise for more efficient and cost-effective CO2 capture, although their long-term behavior in operation has yet to be well studied. New observations of extended structure solvent behavior show that some solvent formulations transform into a glass-like phase upon aging at operating temperatures after contact with CO2. The glassification of a solvent would be detrimental to a carbon-capture process due to plugging of infrastructure, introducing a critical need to decipher the underlying principles of this phenomenon to prevent it from happening. We present the first integrated theoretical and experimental study to characterize the nano-structure of metastable and glassy states of an archetypal single-component alkanolguanidine carbon-capture solvent and assess how minute changes in atomic-level interactions convert the solvent between metastable and glass-like states. Small-angle neutron scattering and neutron diffraction coupled with small- and wide-angle X-ray scattering analysis demonstrate that minute structural changes in solution precipitae reversible aggregation of zwitterionic alkylcarbonate clusters in solution. Our findings indicate that our test system, an alkanolguanidine, exhibits a first-order phase transition, similar to a glass transition, at approximately 40 °C-close to the operating absorption temperature for post-combustion CO2 capture processes. We anticipate that these phenomena are not specific to this system, but are present in other classes of colvents as well. We discuss how molecular-level interactions can have vast implications for solvent-based carbon-capture technologies, concluding that fortunately in this case, glassification of water-lean solvents can be avoided as long as the solvent is run above its glass transition temperature.
RESUMEN
Capturing carbon dioxide from post-combustion gas streams is an energy-intensive process that is required prior to either converting or sequestering CO2 . Although a few commercial 1st and 2ndâ generation aqueous amine technologies have been proposed, the cost of capturing CO2 with these technologies remains high. One approach to decrease costs of capture has been the development of water-lean solvents that aim to increase efficiency by reducing the water content in solution. Water-lean solvents, such as γ-aminopropyl aminosilicone/triethylene glycol (GAP/TEG), are promising technologies, with the potential to halve the parasitic load to a coal-fired power plant, albeit only if high solution viscosities and hydrolysis of the siloxane moieties can be mitigated. This study concerns an integrated multidisciplinary approach to overhaul the GAP/TEG solvent system at the molecular level to mitigate hydrolysis while also reducing viscosity. Cosolvents and diluents are found to have negligible effects on viscosity and are not needed. This finding allows for the design of single-component siloxane-free diamine derivatives with site-specific incorporation of selective chemical moieties for direct placement and orientation of hydrogen bonding to reduce viscosity. Ultimately, these new formulations are less susceptible to hydrolysis and exhibit up to a 98 % reduction in viscosity compared to the initial GAP/TEG formulation.
RESUMEN
This work discusses the first set of rheometric measurements carried out on commercially accessible juvenile and aged skin models under large amplitude oscillatory shear deformations. The results were compared with those of native male whole human and dermis-only foreskin specimens, catering to a few ages from 0.5 to 68 years, including specimens from a 23-year-old male abdomen. At large strains, strain thinning was more pronounced for the dermis of the young skins and for their whole skin counterparts. An inverse qualitative tendency was observed for the adult skins and the skin models. This can be explained by the high dermal collagen compactness associated with an incomplete epidermal proliferation. The qualitative Lissajous plots as well as the quantitative dimensionless indices analyzed using the MITlaos software indicated predominant nonlinear intracycle elastic strain stiffening and viscous shear thinning for all the native specimens at the maximum deformation. For the full thickness models, we have evidence of structure collapse and yielding under similar conditions. The whole skin specimen from the 68-year-old male showed smaller age-dependent nonlinear elastic contributions than the dermis, which we relate to the epidermal degeneration taking place during aging. Regardless of the age group, the models manifested more pronounced intercycle and intracycle elastic nonlinearities, and their magnitudes were significantly larger. The nonlinear elastic trends will serve as advanced standards for understanding and delineating the mechanical limits of destructive and non-destructive deformations of such unique biomaterials.
Asunto(s)
Elasticidad , Ensayo de Materiales , Dinámicas no Lineales , Procedimientos de Cirugía Plástica , Piel/citología , Estrés Mecánico , Anciano , Fenómenos Biomecánicos , Niño , Humanos , Lactante , Masculino , Resistencia al Corte , Viscosidad , Adulto JovenRESUMEN
The study reports first ever account of measurements of linear viscoelastic moduli under small amplitude oscillatory shear deformations, for commercially available juvenile and aged in vitro 3D reconstructed skin models. The results were compared with those of native male whole human and dermis-only foreskin samples, catering to a wide age group from 0.5 to 68 years, including samples from a 23-year-old male abdomen. In the strain sweep tests, the dermis of the juvenile/young age group assumed a higher intrinsic elastic modulus than the whole skin. A reverse qualitative trend was noted for the adult/aged age group. Confirmed by the histological examination of the stained cross-sections, this is attributed to the nascent epidermal differentiation and the high fiber density of dermal collagen. The oscillation frequency sweeps exposed a greater dependence of the elasticity on the frequency for the native male dermis foreskin samples as compared to the whole skins, irrespective of age. This is anticipated since the extremely structured epidermis confers higher resistance to the whole skins towards intracycle deformations compared to the dermis, thereby storing smaller elastic energy. The 3D skin models examined in this work exhibited a broader linear viscoelastic region, a larger viscoelasticity, and much higher dynamic moduli, compared to the native skin. The rheological trends are a significant addition to the literature and may be used as a reference for the design of next generation of scaffolds.
Asunto(s)
Biomimética , Elasticidad , Piel , Anciano , Fenómenos Biomecánicos , Niño , Preescolar , Humanos , Lactante , Modelos Lineales , Masculino , Reología , Viscosidad , Adulto JovenRESUMEN
Mass transfer coefficients of CO2 are anomalously high in water-lean solvents as compared to aqueous amines. Such phenomena are intrinsic to the molecular and nanoscale structure of concentrated organic CO2 capture solvents. To decipher the connections, we performed in situ liquid time-of-flight secondary ionization mass spectroscopy on a representative water-lean solvent, 1-((1,3-Dimethylimidazolidin-2-ylidene)amino)propan-2-ol (IPADM-2-BOL). Two-dimensional (2D) and three-dimensional (3D) chemical mapping of the solvent revealed that IPADM-2-BOL exhibited a heterogeneous molecular structure with regions of CO2-free solvent coexisting with clusters of zwitterionic carbonate ions. Chemical mapping were consistent with molecular dynamic simulation results, indicating CO2 diffusing through pockets and channels of unreacted solvent. The observed mesoscopic structure promotes and enhances the diffusion and reactivity of CO2, likely prevalent in other water-lean solvents. This finding suggests that if the size, shape and orientation of the domains can be controlled, more efficient CO2 capture solvents could be developed to enhance mass-transfer and uptake kinetics.
RESUMEN
This review is designed to foster the discussion regarding the viability of postcombustion CO2 capture by water-lean solvents, by separating fact from fiction for both skeptics and advocates. We highlight the unique physical and thermodynamic properties of notable water-lean solvents, with a discussion of how such properties could translate to efficiency gains compared to aqueous amines. The scope of this review ranges from the purely fundamental molecular-level processes that govern solvent behavior to bench-scale testing, through process engineering and projections of process performance and cost. Key discussions of higher than expected CO2 mass transfer, water tolerance, and compatibility with current infrastructure are presented along with current limitations and suggested areas where further solvent development is needed. We conclude with an outlook of the status of the field and assess the viability of water-lean solvents for postcombustion CO2 capture.
RESUMEN
Anthropogenic CO2 emissions from point sources (e.g., coal fired-power plants) account for the majority of the greenhouse gases in the atmosphere. Water-lean solvent systems such as CO2 -binding organic liquids (CO2 BOLs) are being developed to reduce the energy requirement for CO2 capture. Many water-lean solvents such as CO2 BOLs are currently limited by the high viscosities of concentrated electrolyte solvents, thus many of these solvents have yet to move toward commercialization. Conventional standard trial-and-error approaches for viscosity reduction, while effective, are time consuming and economically expensive. We rethink the metrics and design principles of low-viscosity CO2 -capture solvents using a combined synthesis and computational modeling approach. We critically study the effects of viscosity reducing factors such as orientation of hydrogen bonding, introduction of higher degrees of freedom, and cation or anion charge solvation, and assess whether or how each factor affects viscosity of CO2 BOL CO2 capture solvents. Ultimately, we found that hydrogen bond orientation and strength is the predominant factor influencing the viscosity in CO2 BOL solvents. With this knowledge, a new CO2 BOL variant, 1-MEIPADM-2-BOL, was synthesized and tested, resulting in a solvent that is approximately 60 % less viscous at 25â mol % CO2 loading than our base compound 1-IPADM-2-BOL. The insights gained from the current study redefine the fundamental concepts and understanding of what influences viscosity in concentrated organic CO2 -capture solvents.
Asunto(s)
Dióxido de Carbono/química , Dióxido de Carbono/aislamiento & purificación , Residuos Industriales , Compuestos Orgánicos/química , Solventes/química , ViscosidadRESUMEN
Gold catalysis is considered one of the most important breakthroughs in organic synthesis during the last decade. Many gold-catalyzed reactions suffer from high catalyst loading, which is a serious limitation on the application of gold catalysis in larger scale synthesis. Because ligands play a major role in the tuning of reactivity of transition metal catalysts, there has been an increased effort on rationally understanding ligand effects in gold catalysis and using a rational ligand design to achieve higher efficiency. In the first part of this chapter, selected examples of ligand design in gold catalysis are discussed. In the second part, the chemistry of gold-oxonium intermediate is examined. An oxonium intermediate is generated when a oxygen nucleophile (ketone, aldehyde, or ether) attacks a cationic gold-activated multiple bond. This oxonium intermediate, being a highly energetic species, has the potential to undergo further transformations such as electron transfer/rearrangement/protodeauration to form diverse products.
RESUMEN
Biolubricants from Castor oil were produced enzymatically by transesterification with higher alcohols using a lipase mixture of immobilized Mucor miehei (RMIM) and immobilized Candida antarctica lipase B (Novozym 435) under low water conditions. The conversions were in the range of 80-95% under the optimized conditions.
Asunto(s)
Alcoholes/química , Alcoholes/metabolismo , Aceite de Ricino/química , Aceite de Ricino/metabolismo , Enzimas Inmovilizadas/metabolismo , Proteínas Fúngicas/metabolismo , Lipasa/metabolismo , Esterificación , Mucor/enzimología , Agua/análisis , Agua/metabolismoRESUMEN
Gold catalysts capable of promoting reactions at low-level loadings under mild conditions are the exception rather than the norm. We examined reactions where the regeneration of cationic gold catalyst (e.g., protodeauration) was the turnover limiting stage. By manipulating electron density on the substituents around phosphorus and introducing steric handles we designed a phosphine ligand that contains two electron-rich ortho-biphenyl groups and a cyclohexyl substituent. This ligand formed a gold complex that catalyzed common types of gold-catalyzed reactions including intra- and intermolecular XH (X=C, N, O) additions to alkynes and cycloisomerizations, with high turnover numbers at room temperature or slightly elevated temperatures (≤50 °C). Our new ligand can be prepared in one step from commercially available starting materials.
RESUMEN
The synergy of ultrasonication and the exposure to light radiation was found to be necessary in the formation of nanocomposites of silver and a protease alpha chymotrypsin. The reaction was carried out in aqueous medium and the process took just less than 35 min. Ultrasonication alone formed very negligible number of nanoparticles of <100 nm size whereas light alone produced enough number but the size of the particles was >100 nm. The effects of pH (in the range of 3-5, 9-10), ultrasonication time periods (0-30 min), ultrasonication intensity (33-83 W cm(-2)), energy of light radiation (short UV, long UV and Fluorescent light) and time period of exposure (5-60 min) to different light radiations were studied. The formation of nanocomposites under these effects was followed by surface plasmon resonance (SPR) spectra, dynamic light scattering (DLS), transmission electron microscopy (TEM). Ag-chymotrypsin nanocomposites of sizes ranging from 13 to 72 nm were formed using the synergy of ultrasonication and exposure to short UV radiation. Results show that ultrasonication promoted nuclei formation, growth and reduction of polydispersity by Ostwald ripening.
Asunto(s)
Quimotripsina/química , Nanocompuestos/química , Plata/química , Acústica , Quimotripsina/metabolismo , Fluorescencia , Concentración de Iones de Hidrógeno , Luz , Microscopía Electrónica de Transmisión , Dispersión de Radiación , Resonancia por Plasmón de Superficie , Factores de Tiempo , Rayos UltravioletaRESUMEN
With the suitable selection of a gold catalyst as well as the appropriate control of the reaction conditions, various new gold-catalyzed cyclizations of 2-alkynyl benzaldehyde with acyclic or cyclic vinyl ethers have been developed. Acetal-tethered dihydronaphthalene and isochromenes were obtained from the reactions of 2-alkynyl benzaldehydes with acyclic vinyl ethers under mild conditions. And, more interestingly, the gold-catalyzed reactions of 2-alkynyl benzaldehyde with a cyclic vinyl ether afforded the bicyclo[2.2.2]octane derivative involving two molecules of cyclic vinyl ethers. These products contain interesting substructures that have been found in many biologically active molecules and natural products. In addition, a gold-catalyzed homo-dimerization of 2-phenylethynyl benzaldehyde 1a was observed when the reaction was carried out in the absence of vinyl ether, affording a set of separable diastereomeric products. Plausible mechanisms for these transformations are discussed; a gold-containing benzopyrylium was regarded as the crucial intermediate by which a number of these new transformations took place.
Asunto(s)
Benzaldehídos/química , Benzopiranos/síntesis química , Compuestos Bicíclicos con Puentes/síntesis química , Oro/química , Naftalenos/síntesis química , Octanos/síntesis química , Compuestos de Vinilo/química , Benzaldehídos/síntesis química , Benzopiranos/química , Compuestos Bicíclicos con Puentes/química , Catálisis , Ciclización , Naftalenos/química , Octanos/química , Estereoisomerismo , Compuestos de Vinilo/síntesis químicaRESUMEN
The gold-catalyzed intramolecular oxygen-transfer reactions of 2-alkynyl-1,5-diketones or 2-alkynyl-5-ketoesters-obtained from tetra-n-butylammonium fluoride mediated Michael addition of activated allenes to electron-deficient olefins-furnished cyclopentenyl ketones under very mild conditions. These reactions proceeded much easier and faster than similar reactions reported in literature, and the corresponding products were obtained in very good yields. Mechanistic investigations on the cycloisomerization were carried out by means of both (18) O isotopic experiments and quantum chemical calculations. The results from both, the designed isotopic experiments and theoretical calculations, satisfactorily supported the novel proposed intramolecular [4+2] cycloaddition of a gold-containing furanium intermediate to a carbonyl group, instead of the previous well-accepted [2+2] pathway.