RESUMEN
There is an increasing interest for low cost, ultrasensitive, time saving yet reliable, point-of-care bioelectronic sensors. Electrolyte gated organic field effect transistors (EGOFETs) are proven compelling transducers for various sensing applications, offering direct electronic, label-free transduction of bio-recognition events along with miniaturization, fast data handling and processing. Given that field effect transistors act as intrinsically signal amplifiers, even a small change of a chemical or biological quantity may significantly alter the output electronic signal. In EGOFETs selectivity can be guaranteed by the immobilization of bioreceptors able to bind specifically a target analyte. The layer of receptors can be linked to one of the electronic active interfaces of the transistor, and the interactions with a target molecule affect the electronic properties of the device. The present chapter discusses main aspects of EGOFETs transducers along with detailed examples of how to tailor the device interfaces with desired functionality. The development of an "electronic tongue" based on an EGOFET device coupled to odorant binding proteins (OBPs) for enantiomers differentiation is presented.
Asunto(s)
Técnicas Biosensibles , Transistores Electrónicos , Electrólitos , ElectrónicaRESUMEN
The continuous improvement of the technical potential of bioelectronic devices for biosensing applications will provide clinicians with a reliable tool for biomarker quantification down to the single molecule. Eventually, physicians will be able to identify the very moment at which the illness state begins, with a terrific impact on the quality of life along with a reduction of health care expenses. However, in clinical practice, to gather enough information to formulate a diagnosis, multiple biomarkers are normally quantified from the same biological sample simultaneously. Therefore, it is critically important to translate lab-based bioelectronic devices based on electrolyte gated thin-film transistor technology into a cost-effective portable multiplexing array prototype. In this perspective, the assessment of cost-effective manufacturability represents a crucial step, with specific regard to the optimization of the bio-functionalization protocol of the transistor gate module. Hence, we have assessed, using surface plasmon resonance technique, a sustainable and reliable cost-effective process to successfully bio-functionalize a gold surface, suitable as gate electrode for wide-field bioelectronic sensors. The bio-functionalization process herein investigated allows to reduce the biorecognition element concentration to one-tenth, drastically impacting the manufacturing costs while retaining high analytical performance.
Asunto(s)
Técnicas Biosensibles , Electrodos , Oro , Resonancia por Plasmón de SuperficieRESUMEN
Thiolated self-assembled monolayers (SAMs) are typically used to anchor on a gold surface biomolecules serving as recognition elements for biosensor applications. Here, the design and synthesis of N-(2-hydroxyethyl)-3-mercaptopropanamide (NMPA) in biotinylated mixed SAMs is proposed as an alternative strategy with respect to on-site multistep functionalization of SAMs prepared from solutions of commercially available thiols. In this study, the mixed SAM deposited from a 10:1 solution of 3-mercaptopropionic acid (3MPA) and 11-mercaptoundecanoic acid (11MUA) is compared to that resulting from a 10:1 solution of NMPA:11MUA. To this end, surface plasmon resonance (SPR) and attenuated total reflectance infrared (ATR-IR) experiments have been carried out on both mixed SAMs after biotinylation. The study demonstrated how the fine tuning of the SAM features impacts directly on both the biofunctionalization steps, i.e., the biotin anchoring, and the biorecognition properties evaluated upon exposure to streptavidin analyte. Higher affinity for the target analyte with reduced nonspecific binding and lower detection limit has been demonstrated when NMPA is chosen as the more abundant starting thiol. Molecular dynamics simulations complemented the experimental findings providing a molecular rationale behind the performance of the biotinylated mixed SAMs. The present study confirms the importance of the functionalization design for the development of a highly performing biosensor.
RESUMEN
The increasing interest in technologies capable of tracking a biomarker down to the physical limit points toward new opportunities in early diagnostics of progressive diseases. Indeed, single-molecule detection technologies are foreseen to enable clinicians to associate the tiniest increase in a biomarker with the progression of a disease, particularly at its early stage. Bioelectronic organic transistors represent an extremely powerful tool to achieve label-free and single-molecule detection of clinically relevant biomarkers. These electronic devices are millimetric in size and in the future could be mass-produced at low cost. The core of the single molecule with a large transistor (SiMoT) platform, based on an electrolyte-gated field-effect transistor, is a gold gate electrode biofunctionalized with a self-assembled monolayer, a densely packed layer of recognition elements. So far, only the SiMoT detection of proteins, using the corresponding antibodies as recognition elements, has been reported. In this study, the SiMoT sensing response toward genomic biomarkers is proposed. Herein, the gate is functionalized with a genomic biomarker for multiple sclerosis (miR-182). This is relevant, not only because a limit of detection of a single molecule is achieved but also because it proves that the SiMoT label-free, single-molecule detection principle is the only one of its kind that can detect, by means of the same platform, both protein and genomic markers.
Asunto(s)
Técnicas Biosensibles , Transistores Electrónicos , Biomarcadores , Genómica , NanotecnologíaRESUMEN
Single-molecule sensing is becoming a major driver in biomarker assays as it is foreseen to enable precision medicine to enter into everyday clinical practice. However, among the single-molecule detection methods proposed so far, only a few are fully exploitable for the ultrasensitive label-free assay of biofluids. Firstly introduced single-molecule sensing platforms encompass low-background-noise fluorescent microscopy as well as plasmonic and electrical nanotransducers; these are generally able to sense at the nanomolar concentration level or higher. Label-based single-molecule technologies relying on optical transduction and microbeads that can scavenge and detect a few biomarkers in the bulk of real biofluids, reaching ultralow detection limits, have been recently commercialized. These assays, thanks to the extremely high sensitivity and convenient handling, are new trends in the field as they are paving the way to a revolution in early diagnostics. Very recently, another new trend is the label-free, organic bioelectronic electrolyte-gated large transistors that can potentially be produced by means of large-area low-cost technologies and have been proven capable to detect a protein at the physical limit in real bovine serum. This article offers a bird's-eye view on some of the more significant single-molecule bioanalytical technologies and highlights their sensing principles and figures-of-merit such as limit of detection, need for a labelling step, and possibility to operate, also as an array, directly in real biofluids. We also discuss the new trend towards single-molecule proof-of-principle extremely sensitive technologies that can detect a protein at the zeptomolar concentration level involving label-free devices that potentially offer low-cost production and easy scalability.
Asunto(s)
Técnicas de Química Analítica/métodos , Imagen Individual de Molécula/métodos , Biomarcadores/análisis , Técnicas Biosensibles/métodos , Límite de Detección , Microscopía Fluorescente/métodos , Nanotecnología , Reproducibilidad de los Resultados , Transistores ElectrónicosRESUMEN
Early diagnosis of the infection caused by human immunodeficiency virus type-1 (HIV-1) is vital to achieve efficient therapeutic treatment and limit the disease spreading when the viremia is at its highest level. To this end, a point-of-care HIV-1 detection carried out with label-free, low-cost, and ultra-sensitive screening technologies would be of great relevance. Herein, a label-free single molecule detection of HIV-1 p24 capsid protein with a large (wide-field) single-molecule transistor (SiMoT) sensor is proposed. The system is based on an electrolyte-gated field-effect transistor whose gate is bio-functionalized with the antibody against the HIV-1 p24 capsid protein. The device exhibits a limit of detection of a single protein and a limit of quantification in the 10 molecule range. This study paves the way for a low-cost technology that can quantify, with single-molecule precision, the transition of a biological organism from being "healthy" to being "diseased" by tracking a target biomarker. This can open to the possibility of performing the earliest possible diagnosis.
Asunto(s)
Técnicas Biosensibles/instrumentación , Proteína p24 del Núcleo del VIH/análisis , VIH-1/aislamiento & purificación , Transistores Electrónicos , Anticuerpos Inmovilizados/química , Infecciones por VIH/diagnóstico , Infecciones por VIH/virología , Humanos , Inmunoensayo/instrumentación , Límite de Detección , Modelos MolecularesRESUMEN
Robust electrolyte-gated organic field-effect-transistors (OFETs) are particularly needed for the development of biosensing devices. However, when a FET biosensor operates in aqueous environments or even in real biological fluids, some critical issues may arise due to the possible lack of environmental long-term and/or operational stability. An important source of instability is associated with the degradation of the organic electronic channel materials such as for instance, poly-3-hexylthiophene (P3HT), a benchmark commercially available p-type organic semiconductor. In this work, the investigation of critical parameters, such as the control over spurious electrochemical phenomena as well as the operating conditions that can affect water-gated OFETs lifetime, is reported, together with a proposed modeling of the P3HT stability curve over 1 week in water. The investigation of possible morphological/chemical modifications occurring at the polymer surface after operating in water for 2 weeks was carried out. Moreover, it is proven how the addition of a gel layer can extend the P3HT based water-gated OFET shelf life up to 2 months.
RESUMEN
In the last decade, saliva has been suggested as non-invasive diagnostic fluid, suitable for clinical use alternatively to blood serum and plasma. However, the clinical applicability of saliva has been hampered so far by the inadequate sensitivity of current methods to detect the lower salivary concentrations of many biomarkers monitored in blood products. Herein, a label-free biosensor based on electrolyte-gated organic thin-film transistor (EGOTFT) has been developed for the detection at the physical limit of C-reactive protein (CRP) in human saliva. CRP is a key relevant biomarker for inflammatory processes and is routinely monitored for many clinical purposes. Herein, an electrolyte-gated thin-film transistor (EGOTFT) has been proposed as a transducer of the biorecognition event taking place at the gate electrode, functionalized with a self-assembled monolayer (SAM) of highly densely packed capturing anti-CRP proteins. Thanks to the SAM, the biosensing platform herein proposed is endowed with ultra-high sensitivity, along with an extremely high selectivity, assessed by measuring the dose curves of CRP interacting with a bovine serum albumin-functionalized gate. Moreover, the biosensing platform is compatible with low-cost fabrication techniques and applicable to the ultra-sensitive detection of a plethora of clinically relevant biomarkers. Therefore, the EGOTFT device herein proposed, being able to operate in physiologically relevant fluids such as saliva, will set the ground to a major revolution in biosensing applications for early clinical detection.
Asunto(s)
Proteína C-Reactiva/análisis , Técnicas Electroquímicas/métodos , Saliva/química , Transistores Electrónicos , Anticuerpos/inmunología , Técnicas Biosensibles/métodos , Proteína C-Reactiva/inmunología , Electrodos , Electrólitos , Humanos , Límite de DetecciónRESUMEN
Label-free single-molecule detection has been achieved so far by funnelling a large number of ligands into a sequence of single-binding events with few recognition elements host on nanometric transducers. Such approaches are inherently unable to sense a cue in a bulk milieu. Conceptualizing cells' ability to sense at the physical limit by means of highly-packed recognition elements, a millimetric sized field-effect-transistor is used to detect a single molecule. To this end, the gate is bio-functionalized with a self-assembled-monolayer of 1012 capturing anti-Immunoglobulin-G and is endowed with a hydrogen-bonding network enabling cooperative interactions. The selective and label-free single molecule IgG detection is strikingly demonstrated in diluted saliva while 15 IgGs are assayed in whole serum. The suggested sensing mechanism, triggered by the affinity binding event, involves a work-function change that is assumed to propagate in the gating-field through the electrostatic hydrogen-bonding network. The proposed immunoassay platform is general and can revolutionize the current approach to protein detection.
Asunto(s)
Imagen Individual de Molécula , Transistores Electrónicos , Animales , Proteínas Sanguíneas/análisis , Bovinos , Electrólitos/química , Femenino , Humanos , Coloración y EtiquetadoRESUMEN
Herein a label-free immunosensor based on electrolyte-gated organic field-effect transistor (EGOFET) was developed for the detection of procalcitonin (PCT), a sepsis marker. Antibodies specific to PCT were immobilized on the poly-3-hexylthiophene (P3HT) organic semiconductor surface through direct physical adsorption followed by a post-treatment with bovine serum albumin (BSA) which served as the blocking agent to prevent non-specific adsorption. Antibodies together with BSA (forming the whole biorecognition layer) served to selectively capture the procalcitonin target analyte. The entire immunosensor fabrication process was fast, requiring overall 45min to be completed before analyte sensing. The EGOFET immunosensor showed excellent electrical properties, comparable to those of bare P3HT based EGOFET confirming reliable biosensing with bio-functional EGOFET immunosensor. The detection limit of the immunosensor was as low as 2.2pM and within a range of clinical relevance. The relative standard deviation of the individual calibration data points, measured on immunosensors fabricated on different chips (reproducibility error) was below 7%. The developed immunosensor showed high selectivity to the PCT analyte which was evident through control experiments. This report of PCT detection is first of its kind among the electronic sensors based on EGOFETs. The developed sensor is versatile and compatible with low-cost fabrication techniques.
Asunto(s)
Técnicas Biosensibles , Calcitonina/aislamiento & purificación , Inmunoensayo/métodos , Adsorción , Anticuerpos Inmovilizados/química , Calcitonina/química , Electrólitos , Límite de Detección , Semiconductores , Transistores ElectrónicosRESUMEN
Electrical double layer (EDL) thin film transistors (TFTs) are an interesting class of transistors that use an electrolyte as the gating medium. Recently it has been demonstrated that pure organic solvents can also be used as gating media for TFTs without the addition of exogenous electrolytes. Here we present a systematic study of the performances of TFTs based on two different semiconductors (P3HT and ZnO) gated through nine different solvents either pure or loaded with NaCl. The nature of the solvent impacts the transfer characteristics of the TFT through a change in the gating capacitance while the threshold voltage remains unaffected. Depending on the polarity of solvents, addition of NaCl gives rise to different responses. TFTs gated through highly polar solvents are unaffected by the salt concentration while for low polarity solvents the output current increases with salt up to a plateau. Furthermore, when the semiconductor surface is covered with a high capacitance thin dielectric layer, the TFT output current becomes dependent on the NaCl concentration also for high polarity solvents. This phenomenology was rationalized considering the different contributions of Helmholtz and Guy-Chapman EDLs to the capacitance and the dielectric saturation that decreases the solvent dielectric constant within the Helmholtz EDL.
RESUMEN
Bioconjugated gold surfaces constitute interesting platforms for biosensing applications. The immobilization of antibodies such as anti-immunoglobulin G and M (anti-IgG and anti-IgM) on gold electrodes via self-assembled monolayers (SAMs) is here studied as a model system for further immunoassays development. The biolayer is characterized by means of X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), a dedicated thin-film transistor (TFT)-based platform and electrochemical surface plasmon resonance (EC-SPR). XPS analysis confirms the presence of all the chemical species involved in the fabrication process as well as the covalent attachment of the antibodies with high reproducibility. Visualization of the biolayer topography by AFM shows nanostructures with a thickness consistent with the actual size of the protein, which is also verified by SPR measurements. EC-SPR allows taking advantage of complementary electrochemical and optical signals during the functionalization steps. Moreover, the functionalization of gold leads to a change in the work function, which is demonstrated in an electrolyte gated thin-film transistor configuration. Such configuration enables also to evaluate the electrostatic changes occurring on the gate that are connected with the threshold voltage shifts. The data support that functional biomodified gold surfaces can be reproducibly prepared, which is a prerequisite for further biosensor development.
RESUMEN
The study of proteins confined on a surface has attracted a great deal of attention due to its relevance in the development of bio-systems for laboratory and clinical settings. In this respect, organic bio-electronic platforms can be used as tools to achieve a deeper understanding of the processes involving protein interfaces. In this work, biotin-binding proteins have been integrated in two different organic thin-film transistor (TFT) configurations to separately address the changes occurring in the protein-ligand complex morphology and dipole moment. This has been achieved by decoupling the output current change upon binding, taken as the transducing signal, into its component figures of merit. In particular, the threshold voltage is related to the protein dipole moment, while the field-effect mobility is associated with conformational changes occurring in the proteins of the layer when ligand binding occurs. Molecular Dynamics simulations on the whole avidin tetramer in presence and absence of ligands were carried out, to evaluate how the tight interactions with the ligand affect the protein dipole moment and the conformation of the loops surrounding the binding pocket. These simulations allow assembling a rather complete picture of the studied interaction processes and support the interpretation of the experimental results.
Asunto(s)
Técnicas Biosensibles/métodos , Biotina/metabolismo , Proteínas Portadoras/metabolismo , Técnicas Biosensibles/instrumentación , Biotina/química , Proteínas Portadoras/química , Simulación de Dinámica Molecular , Unión Proteica , Conformación Proteica , Semiconductores , Propiedades de SuperficieRESUMEN
In this contribution, we propose a label-free immunosensor, based on a novel type of electrolyte-gated field-effect transistor (EGOFET), for ultrasensitive detection of the C-reactive protein (CRP). The recognition layer of the biosensor is fabricated by physical adsorption of the anti-CRP monoclonal antibody onto a poly-3-hexyl thiophene (P3HT) organic semiconductor surface. A supplementary nonionic hydrophilic polymer is used as a blocking agent preventing nonspecific interactions and allowing a better orientation of the antibodies immobilized onto the P3HT surface. The whole biomolecule immobilization procedure does not require any pretreatment of the organic semiconductor surface, and the whole functionalization process is completed in less than 30 min. Surface plasmon resonance (SPR) measurements were performed to assess the amount of biomolecules physisorbed onto the P3HT and to evaluate the CRP binding proprieties of the deposited anti-CRP layer. A partial surface coverage of about 23 % of adsorbed antibody molecules was found to most efficiently sense the CRP. The electrical performance of the EGOFET immunosensor was comparable to that of a bare P3HT EGOFET device, and the obtained CRP calibration curve was linear over six orders of magnitude (from 4 pM to 2 µM). The relative standard deviation of the individual calibration points, measured on immunosensors fabricated on different chips, ranged between 1 and 14 %, and a detection limit of 2 pM (220 ng/L) was established. The novel electronic immunosensor is compatible with low-cost fabrication procedures and was successfully employed for the detection of the CRP biomarker in the clinically relevant matrix serum. Graphical abstract Schematic of the EGOFET immunosensor for CRP detection. The anti-CRP monoclonal antibody layer is physisorbed on the P3HT organic semiconductor and the CRP is directly measured by a label-free electronic EGOFET transducer.
Asunto(s)
Técnicas Biosensibles/métodos , Proteína C-Reactiva/análisis , Inmunoensayo/métodos , Adsorción , Anticuerpos/química , Anticuerpos Inmovilizados , Técnicas Biosensibles/instrumentación , Electrólitos/química , Inmunoensayo/instrumentación , Límite de Detección , Semiconductores , Tiofenos/químicaRESUMEN
Thin-film transistors can be used as high-performance bioelectronic devices to accomplish tasks such as sensing or controlling the release of biological species as well as transducing the electrical activity of cells or even organs, such as the brain. Organic, graphene, or zinc oxide are used as convenient printable semiconducting layers and can lead to high-performance low-cost bioelectronic sensing devices that are potentially very useful for point-of-care applications. Among others, electrolyte-gated transistors are of interest as they can be operated as capacitance-modulated devices, because of the high capacitance of their charge double layers. Specifically, it is the capacitance of the biolayer, being lowest in a series of capacitors, which controls the output current of the device. Such an occurrence allows for extremely high sensitivity towards very weak interactions. All the aspects governing these processes are reviewed here.
Asunto(s)
Técnicas Biosensibles/métodos , Electrónica Médica/métodos , Impresión/métodos , Transistores Electrónicos , Animales , Técnicas Biosensibles/instrumentación , Capacidad Eléctrica , Electrólitos/química , Electrónica Médica/instrumentación , Diseño de Equipo , Grafito/química , Humanos , Impresión/instrumentación , Termodinámica , Óxido de Zinc/químicaRESUMEN
This review aims to provide an update on the development involving dielectric/organic semiconductor (OSC) interfaces for the realization of biofunctional organic field-effect transistors (OFETs). Specific focus is given on biointerfaces and recent technological approaches where biological materials serve as interlayers in back-gated OFETs for biosensing applications. Initially, to better understand the effects produced by the presence of biomolecules deposited at the dielectric/OSC interfacial region, the tuning of the dielectric surface properties by means of self-assembled monolayers is discussed. Afterward, emphasis is given to the modification of solid-state dielectric surfaces, in particular inorganic dielectrics, with biological molecules such as peptides and proteins. Special attention is paid on how the presence of an interlayer of biomolecules and bioreceptors underneath the OSC impacts on the charge transport and sensing performance of the device. Moreover, naturally occurring materials, such as carbohydrates and DNA, used directly as bulk gating materials in OFETs are reviewed. The role of metal contact/OSC interface in the overall performance of OFET-based sensors is also discussed.
Asunto(s)
Técnicas Biosensibles/instrumentación , Transistores Electrónicos , Técnicas Biosensibles/métodos , Carbohidratos/química , ADN/química , Electrodos , Proteínas/química , Semiconductores , Dióxido de Silicio/químicaRESUMEN
Among the metal oxide semiconductors, ZnO has been widely investigated as a channel material in thin-film transistors (TFTs) due to its excellent electrical properties, optical transparency and simple fabrication via solution-processed techniques. Herein, we report a solution-processable ZnO-based thin-film transistor gated through a liquid electrolyte with an ionic strength comparable to that of a physiological fluid. The surface morphology and chemical composition of the ZnO films upon exposure to water and phosphate-buffered saline (PBS) are discussed in terms of the operation stability and electrical performance of the ZnO TFT devices. The improved device characteristics upon exposure to PBS are associated with the enhancement of the oxygen vacancies in the ZnO lattice due to Na(+) doping. Moreover, the dissolution kinetics of the ZnO thin film in a liquid electrolyte opens the possible applicability of these devices as an active element in "transient" implantable systems.
Asunto(s)
Fosfatos/química , Transistores Electrónicos , Agua/química , Óxido de Zinc/química , Adsorción , Electrólitos/química , Tamaño de la Partícula , Soluciones , Propiedades de SuperficieRESUMEN
Bottom- and top-contact organic thin film transistors (OTFTs) were fabricated, using poly(3-hexylthiophene-2,5-diyl) (P3HT) and poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT-C16) as p-type channel semiconductors. Four different types of OTFTs were fabricated and investigated as gas sensors against three volatile organic compounds, with different associated dipole moments. The OTFT-based sensor responses were evaluated with static and transient current measurements. A comparison between the different architectures and the relative organic semiconductor was made.
Asunto(s)
Conductometría/instrumentación , Electrodos , Gases/química , Membranas Artificiales , Polímeros/química , Tiofenos/química , Transistores Electrónicos , Diseño de Equipo , Análisis de Falla de Equipo , Compuestos Orgánicos Volátiles/análisisRESUMEN
We report on the use of a polyanionic proton conductor, poly(acrylic acid), to gate a poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene]-based organic field-effect transistor (OFET). A planar configuration of the OFET is evaluated, and the electrical performance and implementation on a flexible substrate are discussed.
RESUMEN
The functioning principles of electronic sensors based on organic semiconductor field-effect transistors (OFETs) are presented. The focus is on biological sensors but also chemical ones are reviewed to address general features. The field-induced electronic transport and the chemical and biological interactions for the sensing, each occurring at the relevant functional interface, are separately introduced. Once these key learning points have been acquired, the combined picture for the FET electronic sensing is proposed. The perspective use of such devices in point-of-care is introduced, after some basics on analytical biosensing systems are provided as well. This tutorial review includes also a necessary overview of the OFET sensing structures, but the focus will be on electronic rather than electrochemical detection. The differences among the structures are highlighted along with the implications on the performance level in terms of key analytical figures of merit such as: repeatability, sensitivity and selectivity.