Enhancement of antiproliferative potential of metformin against melanoma mice B16 cells using an optimized liposomal drug delivery system.

OBJECTIVE: Metformin-loaded liposomes were optimized for enhanced antiproliferative activity against melanoma. METHODS: Box-Behnken design and response surface methodology were employed to optimize entrapment efficiency, ex-vivo permeation and vesicle size. The optimized formulation was prepared by both the lipid hydration method and the modified injection method for comparison. Different concentrations of Pluronic F127 were employed for modification. Selected Pluronic-modified formulation (lipid molar concentration 55 mmol, cholesterol 30% and drug loading 52.9 mg) was characterized for morphology, entrapment efficiency, permeation and vesicle size. RESULTS: The optimized formulation resulted in entrapment efficiency of 41.7 ± 0.01%, vesicle size of 1.405 ± 0.061 µm and percentage of permeation was 67 ± 5.5%. The improved cytotoxic effect of the selected formulation against melanoma mice B16 cell line compared with metformin solution was determined using MTT assay. Compared with the corresponding drug solution, the Pluronic-modified optimized liposomes displayed a highly efficient cytotoxic effect as evidenced by significant lowering in IC50 -887.3 ± 23.2 and 26.71 ± 0.69 µg/ml, respectively, P < 0.0001. CONCLUSION: This study introduces an optimized liposomal formulation with enhanced cytotoxic effect against melanoma B16 cell line.

Metformin-loaded ethosomes with promoted anti-proliferative activity in melanoma cell line B16, and wound healing aptitude: Development, characterization and in vivo evaluation.

The present work deals with the development of metformin-loaded ethosomes for localized treatment of melanoma and wound healing. Different ethosomal formulations were prepared using different concentrations of ethanol adopting injection technique. The developed formulations were investigated for entrapment efficiency, ex-vivo skin permeation, vesicle size, morphology and permeation kinetics. The optimized formulation was loaded in 5 % carbomer gel that was evaluated for skin permeation, cytotoxic effect against melanoma mice B16 cell line and for wound healing action. Ethosomes having 30 % v/v ethanol displayed superior entrapment for metformin % (55.3 ± 0.07); and a highly efficient permeation via mice skin (85.8 ± 3.7). The related carbomer ethosomal gel exhibited higher skin permeation compared to the untreated metformin gel (P < 0.001). The metformin ethosomes had a substantial antiproliferative activity against melanoma B16 cells compared to corresponding metformin solution as shown by the lower IC50 values (56.45 ± 1.47 and 887.3 ± 23.2, respectively, P < 0.05) and tumour cell viability (P < 0.05). The ethosomal system had a significant wound healing action in mice (80.5 ± 1.9%) that was superior to that of the marketed product Mebo® ointment (56 ± 1 %), P < 0.05. This ethosomal system demonstrated outstanding induction of the mRNA levels of growth factors (IGF-1, FGF-1, PDGF-B and TGF-ß) that are essential in the healing process. Those findings were supported by histopathologic examination of wound sections of different treated groups. Thus, the study proved that metformin ethosomes as a promising drug delivery system and a conceivable therapeutic approach for treatment of melanoma and wound healing.

Insulin fast-dissolving film for intranasal delivery via olfactory region, a promising approach for the treatment of anosmia in COVID-19 patients: Design, in-vitro characterization and clinical evaluation.

The present work aimed to formulate intranasal insulin fast-dissolving films for treatment of anosmia in patients post COVID-19 infection. Variant films were prepared employing the casting method and using hydroxypropyl methyl cellulose and polyvinyl alcohol. The formulated films were investigated for insulin content, weight variation, surface pH, thickness, folding endurance and disintegration time. In vitro release study was conducted for the selected formulations (F6, F7, F8). A drug/polymer interaction was investigated in the optimized formulation (F7) employing Fourier transform infrared spectroscopy. Clinical study was accomplished for F7 on 20 patients. Sniffin's and olfactory discrimination tests were used for assessing patients. The formulated films displayed appropriate physical characteristics. F7 showed the shortest disintegration time (50 ± 7 s) and fastest release. It displayed compatibility between the drug and the used polymers. The results of the clinical study revealed a significant increase in the olfactory detection scores and olfactory discrimination values in the intervention group (7.9 ± 1.2, 6.7 ± 0.5 respectively) compared to placebo group (3 ± 0.8, 2.8 ± 1).. Intervention group showed significant differences between these scores before and after treatment while the placebo group did not display any significant differences. Thus, the optimized film can be considered as an auspicious approach for managing post COVID-19 anosmia.

A New Approach for Dry Eye Management By Mucoadhesive In situ Gel of Vitamin B12: Formulation, In vitro and In vivo Assessment.

The commitment of the existent study was to develop a mucoadhesive in situ gel systems of vitamin B12 for the management of dry eye disease. The gels were prepared using pluronic F-127 and either of chitosan, carbapol 971P, sodium alginate, or hydroxy propyl methyl cellulose. Drug-excipients compatibility was investigated by means of differential scanning calorimetry and Fourier transform infrared spectroscopy. The gels were characterized for pH, clarity, gelling capacity, viscosity, and adhesion. In vitro release of vitamin B12 from the selected gels was investigated. In vivo effectiveness of the selected gel was determined in rabbit models using Schirmer's and fluorescein tests. The compatibility studies revealed the possibility of incidence of drug/polymer interaction in some formulations. F2-containing pluronic F127 and hydroxypropyl methyl cellulose showed the most appropriate physical characterization and in vitro release profile. The prepared gels showed prolonged drug release with drug release mechanism of combined diffusion and erosion. The in vivo study revealed good effectiveness of the prepared mucoadhesive in situ gel system of vitamin B12 in the treatment of dry eye disease that was comparable to that of the marketed drops.

Topical Nano-Vesicular Spanlastics of Celecoxib: Enhanced Anti-Inflammatory Effect and Down-Regulation of TNF-α, NF-кB and COX-2 in Complete Freund's Adjuvant-Induced Arthritis Model in Rats.

BACKGROUND: Rheumatoid arthritis (RA) is an autoimmune disease that underlies chronic inflammation of the synovial membrane. Non-steroidal anti-inflammatory drugs (NSAIDs) are commonly used to treat RA. However, a long list of adverse events associated with long-term treatment regimens with NSAIDs negatively influences patient compliance and therapeutic outcomes. AIM: The aim of this work was to achieve site-specific delivery of celecoxib-loaded spanlastic nano-vesicle-based delivery system to the inflamed joints, avoiding systemic administration of large doses. METHODOLOGY: To develop spanlastic nanovesicles for transdermal delivery of celecoxib, modified injection method was adopted using Tween 80 or Brij as edge activators. Entrapment efficiency, vesicle size, ex vivo permeation, and morphology of the prepared nano-vesicles were characterized. Carbopol-based gels containing the selected formulations were prepared, and their clarity, pH, rheological performance, and ex vivo permeation were characterized. Celecoxib-loaded niosomes and noisome-containing gels were developed for comparison. The in vivo efficacy of the selected formulations was evaluated in a rat model of Freund's complete adjuvant-induced arthritis. Different inflammatory markers including TNF-α, NF-кB and COX-2 were assessed in paw tissue before and after treatment. RESULTS: The size and entrapment efficiency of the selected spanlastic nano-vesicle formulation were 112.5 ± 3.6 nm, and 83.6 ± 2.3%, respectively. This formulation has shown the highest transdermal flux and permeability coefficient compared to the other investigated formulations. The spanlastics-containing gel of celecoxib has shown transdermal flux of 6.9 ± 0.25 µg/cm2/hr while the celecoxib niosomes-containing gel and unprocessed celecoxib-loaded gel have shown 5.2 ± 0.12 µg/cm2/hr and 0.64 ± 0.09 µg/cm2/hr, respectively. In the animal model of RA, the celecoxib-loaded spanlastics-containing gel significantly reduced edema circumference and significantly suppressed TNF-α, NF-кB and COX-2 levels compared to the niosomes-containing gel, the marketed diclofenac sodium gel, and unprocessed celecoxib-loaded gel. CONCLUSION: The spanlastic nano-vesicle-containing gel represents a more efficient site-specific treatment for topical treatment of chronic inflammation like RA, compared to commercial and other conventional alternatives.

A novel nasal co-loaded loratadine and sulpiride nanoemulsion with improved downregulation of TNF-α, TGF-ß and IL-1 in rabbit models of ovalbumin-induced allergic rhinitis.

PURPOSE: The work aimed to develop a co-loaded loratadine and sulpiride nasal nanoemulsion for allergic rhinitis management. METHODS: Compatibility studies were conducted adopting differential scanning calorimetry and Fourier transform infrared spectroscopy. Nanoemulsion formulations were prepared using soybean lecithin, olive oil and tween 80. Sodium cholate and glycerol were employed as co-surfactants. Nanoemulsions were assessed for viscosity, pH, droplet size, polydispersity index, zeta potential, electrical conductivity, entrapment, In vitro drug release and corresponding kinetics. Stability of the selected formulation was investigated. The biological effectiveness was evaluated in rabbit models of ovalbumin-induced allergic rhinitis by measuring TNF-α, TGF-ß and IL-1. RESULTS: Compatibility studies revealed absence of drug/drug interactions. Nanoemulsions exhibited > 90% entrapment efficiency. The selected nanoemulsion demonstrated small droplet size (85.2 ± 0.2 nm), low PDI (0.35 ± 0.0) and appropriate Zeta Potential (-23.3 ± 0.2) and stability. It also displayed enhanced in vitro drug release following the Higuashi Diffusion and Baker-Lonsdale models. The mean relative mRNA expression of TNF-α, IL-1 and TGF-ß significantly decreased from 9.59 ± 1.06, 4.15 ± 0.02 and 4.15 ± 0.02 to 1.28 ± 0.02, 1.93 ± 0.06 and 1.56 ± 0.02 respectively after treatment with the selected nanoemulsion formulation. CONCLUSION: The results reflected a promising potent effect of the combined loratadine and sulpiride nasal nanoemulsion in managing the symptoms of allergic rhinitis.

Bucco-Adhesive Film as a Pediatric Proper Dosage Form for Systemic Delivery of Propranolol Hydrochloride: In-vitro and in-vivo Evaluation.

OBJECTIVE: To formulate and assess bucco-adhesive films of propranolol hydrochloride for pediatric use. METHODS: Different films were formulated adopting mucin, polyvinyl alcohol, chitosan and carbopol. A drug/polymer compatibility study was conducted adopting differential scanning calorimetry and Fourier transform infrared spectroscopy. The prepared films were physically investigated for variation of weight, propranolol content, thickness, surface pH, proportion of moisture, folding endurance and mucoadhesion. In vitro drug release study and kinetic analysis of the corresponding data have been conducted. The optimized formulation was selected for a bioavailability study using albino rabbits and adopting a developed HPLC method. The pharmacokinetic parameters of the drug were calculated following administration of the optimized film and the corresponding marketed oral tablets to albino rabbits. KEY FINDING: The compatibility study revealed the absence of drug/polymer interaction. The film formulations had suitable mucoadhesive and mechanical properties. The optimized formulation exhibited reasonable drug release that followed Higuchi diffusion pattern. The calculated AUC0-8h presented an enhancement in the bioavailability of propranolol hydrochloride from the selected film formulation by 1.9 times relative to the marketed propranolol oral tablets. CONCLUSION: These findings support that propranolol hydrochloride bucco-adhesive film can be considered as a proper effective dosage form for pediatric delivery.

A Novel Nanoemulsion Intermediate Gel as a Promising Approach for Delivery of Itraconazole: Design, In Vitro and Ex Vivo Appraisal.

The aim the study was to design, formulate, and evaluate self-nanoemulsifying drug delivery systems (SNEDDS) of itraconazole for improving the topical antifungal properties of the drug by adopting the nanoemulsion intermediate gel of the optimized system. Solubility study was conducted to select the most appropriate oils and surfactants for formulation. Different possible systems were created. Ternary phase diagrams were constructed to select the most promising system for further study. The nanoemulsion intermediate gel of the selected system was evaluated for stability, dilution effect, viscosity, pH, antifungal activity, droplet size, PDI, and zeta potential. In vitro release of the drug from the selected intermediate gel was investigated, and the kinetic model of drug release was determined. Ex vivo permeation of itraconazole was studied, and the amount of drug accumulated in the skin was calculated. Solubility and phase diagrams revealed that the system consisting of 60% cotton seed oil and 40% span 80 provided the nanoemulsion intermediate gel with the highest drug concentration. The selected system had a droplet size of about 236 nm and zeta potential of - 59.8. The viscosity of the corresponding intermediate gel was 1583.47 cp. The system exhibited high stability at 4°C and 25°C for 12 months and improved antifungal activity. In vitro release study showed complete release of itraconazole within 4 h, while the ex vivo permeation study revealed accumulation of the majority of the drug within the skin layers (72.5%).

Polymeric micelles for the ocular delivery of triamcinolone acetonide: preparation and in vivo evaluation in a rabbit ocular inflammatory model.

The aim of this study was to prepare triamcinolone acetonide (TA)-loaded poly(ethylene glycol)-block-poly(ε-caprolactone) (PEG-b-PCL) and poly(ethylene glycol)-block-poly(lactic acid) (PEG-b-PLA) micelles as a potential treatment of ocular inflammation. The micelles were evaluated for particle size, drug loading capacity and drug release kinetics. Selected micellar formulations were dispersed into chitosan hydrogel and their anti-inflammatory properties were tested in rabbits using a carrageenan-induced ocular inflammatory model. Particle size ranged from 59.44 ± 0.15 to 64.26 ± 0.55 nm for PEG-b-PCL and from 136.10 ± 1.57 to 176.80 ± 2.25 nm for PEG-b-PLA micelles, respectively. The drug loading capacity was in the range of 6-12% and 15-25% for PEG-b-PCL and PEG-b-PLA micelles, respectively and was dependent on the drug/polymer weight ratio. TA aqueous solubility was increased by 5- and 10-fold after loading into PEG-b-PCL and PEG-b-PLA micelles at a polymer concentration as low as 0.5 mg/mL, respectively. PEG-b-PLA micelles suspended in chitosan hydrogel were able to sustain the drug release where only 42.8 ± 1.6% drug was released in one week. TA/PEG-b-PLA micelles suspended in chitosan hydrogel had better anti-inflammatory effects compared with the plain drug hydrogel or the drug micellar solution. Complete disappearance of the corneal inflammatory changes was observed for the micellar hydrogel. These results confirm the potential of PEG-b-PLA micelles suspended in chitosan hydrogel to enhance the anti-inflammatory properties of triamcinolone acetonide.

Oxiconazole nitrate solid lipid nanoparticles: formulation, in-vitro characterization and clinical assessment of an analogous loaded carbopol gel.

The aim of the present work was to develop a promising drug delivery system of oxiconazole nitrate-loaded solid lipid nanoparticles (SLNs) topical gel to enhance the drug effectiveness for the treatment of Tinea infection. SLNs were prepared by emulsification-solvent evaporation method. Particle size and entrapment efficiency of the prepared SLNs were investigated. An appropriate formulation was selected and examined for morphology and physicochemical characterization adopting Scanning electron microscope and Differential scanning colorimetry. In-vitro drug release was also investigated. The selected SLNs were loaded into 1% Carbopol 934 gel that was investigated for homogeneity, pH, grittiness, spreadability, viscosity and in vitro drug release. Clinical study for the developed gel system compared to the corresponding marketed product was conducted on 28 patients. The results revealed that the prepared oxiconazole nitrate SLNs had drug entrapment efficiency ranging from 41.34% to 75.07% and zeta potential lying between -13 and -50. Physicochemical characterization revealed a decrease in the drug crystallinity in the prepared SLNs. The gel formulation showed appropriate physical characteristics and sustained in-vitro drug release. Clinical study for the prepared oxiconazole nitrate SLNs gel showed significantly less side effects, better patient satisfaction and superior clinical improvement compared with the corresponding marketed product.

Vitamin B12 buccoadhesive tablets: auspicious non-invasive substitute for intra muscular injection: formulation, in vitro and in vivo appraisal.

Attempting to prepare a convenient bioavailable formulation of vitamin B12 (cyanocobalamin), 17 tablet formulations were prepared by direct compression. Different concentrations of hydroxypropyl methyl cellulose (HPMC), carbopol 971p (CP971p), and chitosan (Cs) were used. The tablets were characterized for thickness, weight, drug content, hardness, friability, surface pH, in vitro drug release, and mucoadhesion. Kinetic analysis of the release data was conducted. Vitamin B12 bioavailability from the optimized formulations was studied on rabbits by the aid of enzyme-linked immunosorbent assay. Neurotone® I.M. injection was used for comparison. HPMC (F1-F4), CP971p (F5-F8), and HPMC/CP971p (F12-F15)-based formulations showed acceptable mechanical properties. The formulated tablets showed maximum swelling indices of 232 ± 0.13. The surface pH values ranged from 5.3 ± 0.03 to 6.6 ± 0.02. Bioadhesive force ranged from 66 ± 0.6 to 150 ± 0.5 mN. Results showed that CP971p-based tablets had superior in vitro drug release, mechanical, and mucoadhesive properties. In vitro release date of selected formulations were fitted well to Peppas model. HPMC/CP971p-based formulations showed bioavailability up to 2.7-folds that of Neurotone® I.M. injection.

Vitamin B12-Loaded Buccoadhesive Films as a Noninvasive Supplement in Vitamin B12 Deficiency: In Vitro Evaluation and In Vivo Comparative Study With Intramuscular Injection.

This study aimed to formulate and evaluate vitamin B12-loaded buccal mucoadhesive hydrogel films. Various film formulations were prepared using chitosan and polyvinyl alcohol. The prepared films were characterized for thickness, weight variation, drug content, percentage moisture uptake and moisture content, surface pH, mechanical properties, in vitro release, and mucoadhesion. Vitamin B12 bioavailability from the optimized formulation was studied on rabbits by the aid of enzyme-linked immunosorbent assay. Neuroton® I.M. injection was used for comparison. The films had acceptable mechanical and mucoadhesion properties. The percentages of moisture content of the optimized formulation were 3.2 ± 0.95, whereas the percentage drug released was 98.59 ± 1.41% at the end of 40 min. FTIR revealed the incidence of drug/polymer interaction. Differential scanning calorimetry revealed the possibility of the dispersion of cyanocobalamin in a molecular state with complete amorphization in the polymers. The estimated AUC0-8h showed 1.5-fold increases in the bioavailability of cyanocobalamin from the optimized formulation compared with the marketed I.M. injection. These findings warrant that vitamin B12 buccal film formulation can be considered as an effective alternative portal with noninvasive and more convenient characteristics compared with the I.M. injection dosage form.

Torsemide Fast Dissolving Tablets: Development, Optimization Using Box-Bhenken Design and Response Surface Methodology, In Vitro Characterization, and Pharmacokinetic Assessment.

The present study planed to develop new fast dissolving tablets (FDTs) of torsemide. Solid dispersions (SDs) of torsemide and sorbitol (3:1) or polyvinylpyrrolidone (PVP) k25 were prepared. The prepared SDs were evaluated for in-vitro dissolution. Fourier transform infrared spectroscopy and differential scanning calorimetry for SDs revealed no drug/excipient interactions and transformation of torsemide to the amorphous form. Torsemide/sorbitol SD was selected for formulation of torsemide FDTs by direct compression method. Box-Bhenken factorial design was employed to design 15 formulations using croscarmellose sodium and crospovidone at different concentrations. The response surface methodology was used to analyze the effect of changing these concentrations (independent variables) on disintegration time (Y1), percentage friability (Y2), and amount torsemide released at 10 min. The physical mixtures of torsemide and the used excipients were evaluated for angle of repose, Hausner's ratio, and Carr's index. The prepared FDTs tablets were evaluated for wetting and disintegration time, weight variation, drug content, percentage friability, thickness, hardness, and in vitro release. Based on the in-vitro results and factorial design characterization, F10 and F7 were selected for bioavailability studies following administration to Albino New Zealand rabbits. They showed significantly higher C max and (AUC0-12) and shorter T max than those obtained after administration of the corresponding ordinary commercial Torseretic ® tablets. Stability study was conducted for F10 that showed good stability upon storage at 30°C/75% RH and 40°C/75% RH for 3 months.

Flurbiprofen-loaded niosomes-in-gel system improves the ocular bioavailability of flurbiprofen in the aqueous humor.

The present work aimed to prolong the contact time of flurbiprofen (FBP) in the ocular tissue to improve the drug anti-inflammatory activity. Different niosome systems were fabricated adopting thin-film hydration technique and using the nonionic surfactant Span 60. The morphology of the prepared niosomes was characterized by scanning electron microscopy (SEM). Physical characterization by differential scanning calorimetry, X-ray powder diffraction and Fourier transform infrared spectroscopy were conducted for the optimized formula (F5) that was selected on the basis of percent entrapment efficiency, vesicular size and total lipid content. F5 was formulated as 1% w/w Carpobol 934 gel. Pharmacokinetic parameters of FBP were investigated following ocular administration of F5-loaded gel system, F5 niosome dispersion or the corresponding FBP ocular drops to albino rabbits dispersion. Anti-inflamatory effect of F5-loaded carbopol gel was investigated by histopathological examination of the corneal tissue before and after the treatment of inflamed rabbit eye with the system. Results showed that cholesterol content, surfactant type. and total lipid contents had an apparent impact on the vesicle size of the formulated niosomes. Physical characterization revealed reduced drug crystallinity and incidence of interaction with other niosome contents. F5-loaded gel showed higher Cmax, area under the curve (AUC0-12), and thus higher ocular bioavailability than those of the corresponding FBP ocular solution. F5-loaded gel showed a promising rapid anti-inflammatory effect in the inflamed rabbit eye. These findings will eradicate the necessity for frequent ocular drug instillation and thus, improve patient compliance.

Comparative studies for ciprofloxacin hydrochloride pre-formed gels and thermally triggered (in situ) gels: in vitro and in vivo appraisal using a bacterial keratitis model in rabbits.

This article reports on comparative in vitro characterization and in vivo evaluation of pre-formed cellulose-based gels, methylcellulose (MC) and carboxymethylcellulose sodium (CMC) and in situ gel-forming Pluronic F127 (PL) for ocular delivery of ciprofloxacin hydrochloride (Cipro) by using a bacterial keratitis model and histological corneal examination. Drug-polymer interactions were studied employing thermal analysis. Further, different concentrations (1-3% w/w or 10-30% w/w) of gels depending on the nature of the polymer used were prepared, characterized for clarity, pH, rheology and in vitro release. Selected gel formulations were evaluated for ocular delivery to Staphylococcus aureus-infected rabbit corneas; and ocular toxicity through histological examination of the cornea. The results demonstrated no Cipro-polymers physicochemical interactions and pseudoplastic flow for all gels used at 35 °C. Both polymer concentrations and drug solubility in the gels are dominantly the rate-determining factors for in vitro drug release. The corneal healing rate for all gel-based formulations was significantly faster (p < 0.05) than that for Cipro solution-treated rabbits. PL-based gel induced significant swelling/edema of the corneal stroma, compared with MC- and CMC-based gels. In conclusion, cellulose-based polymers have superior ocular tolerability/dramatically less irritant; and superior efficacy with more convenient administration compared with PL and Cipro solution, respectively.

In vitro evaluation and in vivo performance of lyophilized gliclazide.

Enhancement of the dissolution rate of the poorly water-soluble hypoglycemic agent, gliclazide, by the aid of lyophilization was investigated. Mannitol, sodium lauryl sulfate (SLS) and polyvinyl pyrrolidone (PVP-k-30) were employed in different weight ratios (43%, 56% and 64% w/w, respectively) as water-soluble excipients in the formulation. Lyophilized systems were found to exhibit extremely higher in vitro dissolution rate compared to the unprocessed drug powder. Solid state characterization of the lyophilized systems using X-ray powder diffraction, Fourier transform infrared spectroscopy and differential scanning calorimetry techniques revealed that dissolution enhancement was attributable to transformation of gliclazide from the crystalline to an amorphous state in the solid dispersion formed during the lyophilization process. The gastrointestinal absorption and hypoglycemic effect of the lyophilized gliclazide/SLS system were investigated following oral administration to Albino rabbits. Cmax and area under the plasma concentration-time curve of gliclazide (AUC0-12) after administration of the lyophilized formulations were significantly higher than those obtained after administration of the unprocessed gliclazide.