RESUMEN
Aqueous Zn-ion batteries (AZIBs) are considered as promising candidates for the next-generation large-scale energy storage, which, however, is facing the challenge of instable Zn anodes. The anion is pivotal in the stability of anodes, which are not being paid enough attention to. Herein, the modulation of anions is reported using the Hofmeister series in supramolecular chemistry to boost the stability of Zn anodes. It is found that the right-side anions in the Hofmeister series (e.g., OTf-) can enhance the Zn2+ transference number, increase the Coulombic efficiency, facilitate uniform Zn deposition, reduce the freezing point of electrolytes, and thereby stabilize the Zn anodes. More importantly, the right-side anions can form strong interaction with ß-cyclodextrin (ß-CD) compared to the left-side anions, and hence the addition of ß-CD can further enhance the stability of Zn anodes in OTf--based electrolytes, showing enhancement of cycling lifespan in the Zn//Zn symmetric cells more than 45.5 times with ß-CD compared with those without ß-CD. On the contrary, the left-side anions show worse rate performance after the addition of ß-CD. These results provide an effective and novel approach for choosing anions and matching additives to stabilize the anodes and achieve high-performance AZIBs through the Hofmeister effect.
RESUMEN
Fluoro-substitution solvents have achieved great success in electrolyte engineering for high-energy lithium metal batteries, which, however, is beset by low solvating power, thermal and chemical instability, and possible battery swelling. Instead, we herein introduce cyanogen as the electron-withdrawing group to enhance the oxidative stability of ether solvents, in which cyanogen and ether oxygen form the chelating structure with Li+ not notably undermining the solvating power. Cyano-group strongly bonds with transition metals (TMs) of NCM811 cathode to attenuate the catalytic reactivity of TMs toward bulk electrolytes. Besides, a stable and uniform cathode-electrolyte interphase (CEI) inhibits the violent oxidation decomposition of electrolytes and guarantees the structural integrity of the NCM811 cathode. Also, a N-containing and LiF-rich solid-electrolyte interphase (SEI) in our electrolyte facilitates fast Li+ migration and dense Li deposition. Accordingly, our electrolyte enables a stable cycle of Li metal anode with Coulombic efficiency of 98.4% within 100 cycles. 81.8% capacity of 4.3 V NCM811 cathode remains after 200 cycles. Anode-free pouch cells with a capacity of 125 mAh maintain 76% capacity after 100 cycles, corresponding to an energy density of 397.5 Wh kg-1.
RESUMEN
Carbon neutrality calls for renewable energies, and the efficient use of renewable energies requires energy storage mediums that enable the storage of excess energy and reuse after spatiotemporal reallocation. Compared with traditional energy storage technologies, mobile energy storage technologies have the merits of low cost and high energy conversion efficiency, can be flexibly located, and cover a large range from miniature to large systems and from high energy density to high power density, although most of them still face challenges or technical bottlenecks. In this review, we provide an overview of the opportunities and challenges of these emerging energy storage technologies (including rechargeable batteries, fuel cells, and electrochemical and dielectric capacitors). Innovative materials, strategies, and technologies are highlighted. Finally, the future directions are envisioned. We hope this review will advance the development of mobile energy storage technologies and boost carbon neutrality.
RESUMEN
The desperate pursuit of high gravimetric specific energy leads to the ignorance of volumetric energy density that is one of the basic requirements for batteries. Due to the high volumetric capacity, less-prone formation of dendrite, and low reduction potential of Mg metal, rechargeable Mg batteries are considered with innately high volumetric energy density. Nevertheless, the substantial elevation in energy density is compromised by extremely excessive Mg metal anode. Herein, the proof-of-concept of anode-free Mg2 Mo6 S8 -MgS/Cu batteries is proposed, in which MgS as the premagnesiation additive constantly decomposes to replenish Mg loss by electrolyte corrosion over cycling, while both Mg2 Mo6 S8 and MgS acts as the active material to reversibly provide high capacities. Besides, Mg2 Mo6 S8 shows superior catalytic activity on the decomposition of MgS and provides the strong affinity to polysulfides to restrain their dissolution. Consequently, the anode-free Mg2 Mo6 S8 -MgS/Cu batteries deliver a high reversible capacity of 190 mAh g-1 with the capacity retention of 92% after 100 cycles, corresponding to the highly competitive energy density of 420 Wh L-1 . The proposed anode-free Mg battery here spotlights the great promise of Mg batteries in achieving high volumetric energy densities, which will significantly expedite the advances of Mg batteries in practice.
RESUMEN
Redox organic electrode materials (OEMs) have attracted extensive attention for batteries due to the possibility to be designed with high performance. However, the practical application of OEMs requires rigor criteria such as low cost, recyclability, scalability and high performance etc. and hence seems still far away. Here, we demonstrate an OEM for high performance aqueous organic batteries. Quantification of the charge storage confirmed the storage of protons with fast reaction kinetics, thereby enabling the high performance at high mass loading. As a result, the laminated pouch cells delivered Ampere-hour-scale capacity with excellent cycling performance. Benefited from the small molecular nature and the stable both charged and discharged states, the electrodes can be recycled at any states of charge with high yields (more than 90 %). This work provides a substantial step in the practical applications of OEMs for the future sustainable batteries.
RESUMEN
Aggressive chemistry involving Li metal anode (LMA) and high-voltage LiNi0.8Mn0.1Co0.1O2 (NCM811) cathode is deemed as a pragmatic approach to pursue the desperate 400 Wh kg-1. Yet, their implementation is plagued by low Coulombic efficiency and inferior cycling stability. Herein, we propose an optimally fluorinated linear carboxylic ester (ethyl 3,3,3-trifluoropropanoate, FEP) paired with weakly solvating fluoroethylene carbonate and dissociated lithium salts (LiBF4 and LiDFOB) to prepare a weakly solvating and dissociated electrolyte. An anion-enrichment interface prompts more anions' decomposition in the inner Helmholtz plane and higher reduction potential of anions. Consequently, the anion-derived interface chemistry contributes to the compact and columnar-structure Li deposits with a high CE of 98.7% and stable cycling of 4.6 V NCM811 and LiCoO2 cathode. Accordingly, industrial anode-free pouch cells under harsh testing conditions deliver a high energy of 442.5 Wh kg-1 with 80% capacity retention after 100 cycles.
RESUMEN
Conjugated coordination polymers (CCPs) with extended π-d conjugation, which can effectively promote long-range delocalization of electrons and enhance conductivity, are superior to traditional metal-organic frameworks (MOFs) and attracted great attention for potential applications in chemical sensors, electronics, energy conversion/storage devices, etc. However, the precise construction of CCPs is still challenging due to the complex and uncontrollable reactions of CCPs. Herein, two different framework dimensions of CCPs are controllably realized by employing the same ligand (2,3,5,6-tetraaminobenzoquinone (TABQ)) and the same metal (copper) as center ions. The manipulation of reaction leads to different valences of ligands and metal ions, different coordination geometries, and thereby 1D-CuTABQ and 2D-CuTABQ frameworks, respectively. High performance of charge storage is hence achieved involving the storage of both cations and anions, and therein, 2D-CuTABQ shows a high reversible capacity of ≈305 mAh g-1 , good rate capability and high capacity retention (≈170 mAh g-1 after 2000 cycles at 5 A g-1 with 0.01% decay per cycle), which outperforms 1D-CuTABQ and almost all of the reported MOFs as cathodes for batteries. These results highlight the delicate structural control of CCPs for high-performance batteries and other various applications.
RESUMEN
Poly(ethylene oxide)-based solid-state electrolytes are widely considered promising candidates for the next generation of lithium and sodium metal batteries. However, several challenges, including low oxidation resistance and low cation transference number, hinder poly(ethylene oxide)-based electrolytes for broad applications. To circumvent these issues, here, we propose the design, synthesis and application of a fluoropolymer, i.e., poly(2,2,2-trifluoroethyl methacrylate). This polymer, when introduced into a poly(ethylene oxide)-based solid electrolyte, improves the electrochemical window stability and transference number. Via multiple physicochemical and theoretical characterizations, we identify the presence of tailored supramolecular bonds and peculiar morphological structures as the main factors responsible for the improved electrochemical performances. The polymeric solid electrolyte is also investigated in full lithium and sodium metal lab-scale cells. Interestingly, when tested in a single-layer pouch cell configuration in combination with a Li metal negative electrode and a LiMn0.6Fe0.4PO4-based positive electrode, the polymeric solid-state electrolyte enables 200 cycles at 42 mA·g-1 and 70 °C with a stable discharge capacity of approximately 2.5 mAh when an external pressure of 0.28 MPa is applied.
RESUMEN
The structural designability of organic electrode materials makes them attractive for symmetric all-organic batteries (SAOBs) by virtue of different plateaus. However, quite a few works have reported all-organic batteries and it is still challenging to develop a high-performance organic material for SAOBs. Herein, a small molecule, 2,3,7,8-tetraaminophenazine-1,4,6,9-tetraone (TAPT), is reported for SAOBs. The rich C=O and C=N groups ensure the high capacity at both plateaus for C=O/C-O and C=N/C-N redox reactions, which are hence utilized as cathodic and anodic active centers respectively. Moreover, the presence of C=O, C=N and NH2 groups resulted in plentiful strong intermolecular interactions, leading to layered structures, insolubility and high stability. The rich functional groups also facilitated the chelation of N and O with Li cations and hence benefited the storage of Li cations. The electrochemical performances of TAPT-based SAOBs outperformed all of the previously reported SAOBs.
RESUMEN
Li-S batteries have been regarded as one of the most promising alternatives of the next-generation Li batteries. However, the dissolution and shuttling of lithium polysulfides lead to low cycle stability and low Coulombic efficiency, which intensively hinder the practical application of Li-S batteries. Herein, we propose a strategy to simultaneously promote the redox kinetics and inhibit the shuttle of lithium polysulfides, through in situ synthesis of insoluble organopolysulfides by adding a special additive. Attractively, the thus-formed insoluble organopolysulfides in the form of nanoparticle aggregates are also capable of adsorbing unconverted lithium polysulfides and hence effectively spatially suppress the shuttle effect. Furthermore, the organopolysulfides served as active redox mediators, showing faster redox kinetics of S chemistry than that of lithium polysulfides. As a result, the Li-S batteries showed impressive capacity, improved rate performance, and long cycling stability even under lean-electrolyte and high sulfur loading conditions.
RESUMEN
The electrochemical performance of rechargeable Mg batteries (RMBs) is primarily determined by the cathodes. However, the strong interaction between highly polarized Mg2+ and the host lattice is a big challenge for inorganic cathode materials. While endowed with weak interaction with Mg2+ , organic polymers are capable of fast reaction kinetics. Besides, with the advantages of light weight, abundance, low cost, and recyclability, polymers are deemed as ideal cathode materials for RMBs. Although polymer cathodes have remarkably progressed in recent years, there are still significant challenges to overcome before reaching practical application. In this perspective, the challenges faced by polymer cathodes are critically focused, followed by the retrospection of efforts devoted to design polymers. Some feasible strategies are proposed to explore new structures and chemistries for the practical application of polymer cathodes in RMBs.
RESUMEN
The lack of appropriate cathodes is restraining the advances of Mg batteries. Crystalline cathode materials suffer from sluggish reaction kinetics and low-capacity delivery. The finite type of crystalline structure further confines the rational design of cathode materials. Herein, we proposed amorphization and anion enrichment as a brand-new strategy to not only enhance the solid-state ion diffusion and provide more ion-storage sites in amorphous structure but also contribute to the local transfer of multiple electrons through the additional anionic redox centers. Accordingly, a series of amorphous titanium polysulfides (a-TiS x , x = 2, 3, and 4) were designed, which significantly outperformed their crystalline counterparts and achieved a highly competitive energy density of â¼260 Wh/kg. The unique Mg2+ storage mechanism involves the dissociation/formation of S-S bonds and changes in the coordination number of Ti, namely, a mixture of conversion and intercalation reaction, accompanied by the joint cationic (Ti) and anionic (S) redox-rich chemistry. Our proposed amorphous and redox-rich design philosophy might provide an innovative direction for developing high-performance cathode materials for multivalent-ion batteries.
RESUMEN
The lithium metal anode (LMA) instability at deep cycle with high utilization is a crucial barrier for developing lithium (Li) metal batteries, resulting in excessive Li inventory and electrolyte demand. This issue becomes more severe in capacity-type lithium-sulfur (Li-S) batteries. High-concentration or localized high-concentration electrolytes are noted as effective strategies to stabilize Li metal but usually lead to a high electrolyte density (>1.4 g mL-1 ). Here we propose a bifunctional fluorinated silane-based electrolyte with a low density of 1.0 g mL-1 that not only is much lighter than conventional electrolytes (≈1.2 g mL-1 ) but also form a robust solid electrolyte interface to minimize Li depletion. Therefore, the Li loss rate is reduced over 4.5-fold with the proposed electrolyte relative to its conventional counterpart. When paired with onefold excess LMA at the electrolyte weight/cell capacity (E/C) ratio of 4.5 g Ah-1 , the Li-S pouch cell using our electrolyte can survive for 103 cycles, much longer than with the conventional electrolyte (38 cycles). This demonstrates that our electrolyte not only reduces the E/C ratio but also enhances the cyclic stability of Li-S batteries under limited Li amounts.
RESUMEN
The strong electrostatic interaction between Al3+ and close-packed crystalline structures, and the single-electron transfer ability of traditional cationic redox cathodes, pose challenged for the development of high-performance rechargeable aluminum batteries. Here, to break the confinement of fixed lattice spacing on the diffusion and storage of Al-ion, we developed a previously unexplored family of amorphous anion-rich titanium polysulfides (a-TiS x , x = 2, 3, and 4) (AATPs) with a high concentration of defects and a large number of anionic redox centers. The AATP cathodes, especially a-TiS4, achieved a high reversible capacity of 206 mAh/g with a long duration of 1000 cycles. Further, the spectroscopy and molecular dynamics simulations revealed that sulfur anions in the AATP cathodes act as the main redox centers to reach local electroneutrality. Simultaneously, titanium cations serve as the supporting frameworks, undergoing the evolution of coordination numbers in the local structure.
RESUMEN
The high weight fraction of the electrolyte in lithium-sulfur (Li-S) full cell is the primary reason its specific energy is much below expectations. Thus far, it is still a challenge to reduce the electrolyte volume of Li-S batteries owing to their high cathode porosity and electrolyte depletion from the Li metal anode. Herein, we propose an ultralight electrolyte (0.83â g mL-1 ) by introducing a weakly-coordinating and Li-compatible monoether, which greatly reduces the weight fraction of electrolyte within the whole cell and also enables Li-S pouch cell functionality under lean-electrolyte conditions. Compared to Li-S batteries using conventional counterparts (≈1.2â g mL-1 ), the Li-S pouch cells equipped with our ultralight electrolyte could achieve an ultralow electrolyte weight/capacity ratio (E/C) of 2.2â g Ah-1 and realize a 19.2 % improvement in specific energy (from 329.9 to 393.4â Wh kg-1 ) under E/S=3.0â µL mg-1 . Moreover, more than 20 % improvement in specific energy could be achieved using our ultralight electrolyte at various E/S ratios.
RESUMEN
The electrochemical utilization of organic electrode materials (OEMs) is highly dependent on an excess amount of inactive carbon at the expense of low packing density and energy density. In this work, the challenges by substituting inactive carbon with electronic conductive inorganic cathode (ECIC) materials, which are endowed with high electronic conductivity to transport electrons for redox reactions of the whole electrodes, high ion-storage capacity to act as secondary active materials, and strong affinity with OEMs to inhibit their dissolution, are addressed. Combining representative ECICs (TiS2 and Mo6 S8 ) with organic electrode materials (perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) and hexaazatrinaphthalene (HATN)) simultaneously achieves high capacity, low porosity, lean electrolyte, and thus high energy density. High gravimetric and volumetric energy densities of 153 Wh kg-1 and 200 Wh L-1 are delivered with superior cycling stability in a 30 mA h-level Li/PTCDA-TiS2 pouch cell. The proof-of-concept of organic-ECIC electrodes is also successfully demonstrated in monovalent Na, divalent Mg, and trivalent Al batteries, indicating their feasibility and generalizability. With the discovery of more ECIC materials and OEMs, it is anticipated that the proposed organic-ECIC system can result in further improvements at cell level to compete with transition metal-based Li-ion batteries.
RESUMEN
Lack of appropriate cathodes severely restrains the development of high-energy Mg batteries. In this work, we proposed joint cationic and anionic redox chemistry of transition-metal (TM) sulfides as the most promising way out. A series of solid-solution pyrite FexCo1-xS2 (0 ≤ x ≤ 1) was specially designed, in which S 3p electrons pour into the d bands of Fe and Co, generating redox-active dimerized (S2)2-. The Fe0.5Co0.5S2 sample is highlighted to deliver a high specific energy of 240 Wh/kg at room temperature involving both cationic (Fe and Co) and anionic (S) redox. The highly delocalized electronic clouds in pyrite structures comfortably accommodate the charge of Mg2+, contributing to the fast kinetics and the superior cycling stability of the Fe0.5Co0.5S2. It is anticipated that the joint cationic and anionic redox chemistry proposed in this work would be the ultimate answer for designing high-energy cathodes for advanced Mg batteries.
RESUMEN
Owing to its unique structure, Chevrel phase (CP) is a promising candidate for applications in rechargeable multivalent (Mg and Al) batteries. However, its wide applications are severely limited by time-consuming and complex synthesis processes, accompanied by uncontrollable growth and large particle sizes, which will magnify the charge trapping effect and lower the electrochemical performance. Here, an iodine vapor transport reaction (IVT) is proposed to obtain large-scale and highly pure Mo6S8 nanosheets, in which iodine helps to regulate the growth kinetics and induce the preferential growth of Mo6S8, as a typical three-dimensional material, to form nanosheets. When applied in rechargeable multivalent (Mg and Al) batteries, Mo6S8 nanosheets show very fast kinetics owing to the short diffusion distance, thereby exhibiting lower polarization, higher capacities, and better low-temperature performance (up to -40 °C) compared to that of microparticles obtained via the conventional method. It is anticipated that Mo6S8 nanosheets would boost the application of Chevrel phase, especially in areas of energy storage and catalysis, and the IVT reaction would be generalized to a wide range of inorganic compound nanosheets.
RESUMEN
The lack of high-power and stable cathodes prohibits the development of rechargeable metal (Na, Mg, Al) batteries. Herein, poly(hexaazatrinaphthalene) (PHATN), an environmentally benign, abundant and sustainable polymer, is employed as a universal cathode material for these batteries. In Na-ion batteries (NIBs), PHATN delivers a reversible capacity of 220â mAh g-1 at 50â mA g-1 , corresponding to the energy density of 440â Wh kg-1 , and still retains 100â mAh g-1 at 10â Ag-1 after 50 000 cycles, which is among the best performances in NIBs. Such an exceptional performance is also observed in more challenging Mg and Al batteries. PHATN retains reversible capacities of 110â mAh g-1 after 200â cycles in Mg batteries and 92â mAh g-1 after 100â cycles in Al batteries. DFT calculations, X-ray photoelectron spectroscopy, Raman, and FTIR show that the electron-deficient pyrazine sites in PHATN are the redox centers to reversibly react with metal ions.
RESUMEN
Because of its high theoretical volumetric capacity and dendrite-free stripping/plating of Mg, rechargeable magnesium batteries (RMBs) hold great promise for high energy density in consumer electronics. However, the lack of high-energy-density cathodes severely constrains their practical applications. Herein, for the first time, we report that a CuS cathode can fully reversibly work through a displacement reaction in CuS/Mg pouch cells at room temperature and provide a high capacity of â¼400 mA h/g in a MACC electrolyte, corresponding to the gravimetric and volumetric energy density of 608 W h/kg and1042 W h/L, respectively. Even after 80 cycles, CuS/Mg pouch cells can maintain a high capacity of 335 mA h/g. Detailed mechanistic studies reveal that CuS undergoes a displacement reaction route rather than a typical conversion mechanism. This work will provide a guide for more discovery of high-performance cathode candidates for RMBs.