Recent progress in critical electrode and electrolyte materials for flexible zinc-ion batteries.

With the increasing popularity of flexible and wearable electronic devices, the demand for power supplies that can be easily bent or worn is also rapidly growing. However, traditional lithium ion batteries are difficult to adapt to complex wearable devices because of their unsatisfactory flexibility and thickness as well as safety issues. Zinc-ion batteries have several advantages, including low redox potential, high theoretical capacity, high safety, and abundant reserves. These features make flexible zinc-ion batteries (FZIBs) an ideal wearable energy storage device candidate. The electrochemical performance and mechanical deformability of FZIBs were pivotally determined based on the properties of their electrode and electrolyte. Herein, we summarize some recent advances from 2015 to 2023 in the design and preparation of various electrode and electrolyte materials for FZIBs with controllable morphology and structure, excellent mechanical property, and enhanced electrochemical performance. Moreover, efforts to explore the potential practical applications of FZIBs have also been considered. Finally, we present and discuss current challenges and opportunities for the development of high-performance FZIBs.

Two Birds with One Stone: V4 C3 MXene Synergistically Promoted VS2 Cathode and Zinc Anode for High-Performance Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries (AZIBs) are considered to be a rising star in the large-scale energy storage area because of their low cost and environmental friendliness properties. However, the limited electrochemical performance of the cathode and severe zinc dendrite of the anode severely hinder the practical application of AZIBs. Herein, a novel 3D interconnected VS2 ⊥V4 C3 Tx heterostructure material is prepared via one-step solvothermal method. Morphological and structural characterizations show that VS2 nanosheets are uniformly and dispersedly distributed on the surface of the V4 C3 MXene substrate, which can effectively suppress volume change of the VS2 . Owing to the open heterostructure along with the high conductivity of V4 C3 MXene, the VS2 ⊥V4 C3 Tx cathode shows a high specific capacity of 273.9 mAh g-1 at 1 A g-1 and an excellent rate capability of 143.2 mAh g-1 at 20 A g-1 . The V4 C3 MXene can also effectively suppress zinc dendrite growth when used as protective layer for the Zn anode, making the V4 C3 Tx @Zn symmetric cell with a stable voltage profile for ≈1700 h. Benefitting from the synergistic modification effect of V4 C3 MXene on both the cathode and anode, the VS2 ⊥V4 C3 Tx ||V4 C3 Tx @Zn battery exhibits a long cycling lifespan of 5000 cycles with a capacity of 157.1 mAh g-1 at 5A g-1 .

Surface Modification Driven Initial Coulombic Efficiency and Rate Performance Enhancement of Li1.2 Mn0.54 Ni0.13 Co0.13 O2 Cathode.

Due to its high energy density and low cost, Li-rich Mn-based layered oxides are considered potential cathode materials for next generation Li-ion batteries. However, they still suffer from the serious obstacle of low initial Coulombic efficiency, which is detrimental to their practical application. Here, an efficient surface modification method via NH4 H2 PO4 assisted pyrolysis is performed to improve the Coulombic efficiency of Li1.2 Mn0.54 Ni0.13 Co0.13 O2 , where appropriate oxygen vacancies, Li3 PO4 and spinel phase are synchronously generated in the surface layer of LMR microspheres. Under the synergistic effect of the oxygen vacancies and spinel phase, the unavoidable oxygen release in the cycling process was effectively suppressed. Moreover, the induced Li3 PO4 nanolayer could boost the lithium-ion diffusion and mitigate the dissolution of transition metal ions, especially manganese ions, in the material. The optimally modified sample yielded an impressive initial Coulombic efficiency and outstanding rate performance.

Magneto-electrochemistry driven ultralong-life Zn-VS2 aqueous zinc-ion batteries.

The development of high energy density and long cycle lifespan aqueous zinc ion batteries is hindered by the limited cathode materials and serious zinc dendrite growth. In this work, a defect-rich VS2 cathode material is manufactured by in situ electrochemical defect engineering under high charge cut-off voltage. Owing to the rich abundant vacancies and lattice distortion in the ab plane, the tailored VS2 can unlock the transport path of Zn2+ along the c-axis, enabling 3D Zn2+ transport along both the ab plane and c-axis, and reduce the electrostatic interaction between VS2 and zinc ions, thus achieving excellent rate capability (332 mA h g-1 and 227.8 mA h g-1 at 1 A g-1 and 20 A g-1, respectively). The thermally favorable intercalation and 3D rapid transport of Zn2+ in the defect-rich VS2 are verified by multiple ex situ characterizations and density functional theory (DFT) calculations. However, the long cycling stability of the Zn-VS2 battery is still unsatisfactory due to the Zn dendrite issue. It can be found that the introduction of an external magnetic field enables changing the movement of Zn2+, suppressing the growth of zinc dendrites, and resulting in enhanced cycling stability from about 90 to 600 h in the Zn||Zn symmetric cell. As a result, a high-performance Zn-VS2 full cell is realized by operating under a weak magnetic field, which shows an ultralong cycle lifespan with a capacity of 126 mA h g-1 after 7400 cycles at 5 A g-1, and delivers the highest energy density of 304.7 W h kg-1 and maximum power density of 17.8 kW kg-1.

Carbon Foam-Supported VS2 Cathode for High-Performance Flexible Self-Healing Quasi-Solid-State Zinc-Ion Batteries.

As the new generation of energy storage systems, the flexible battery can effectively broaden the application area and scope of energy storage devices. Flexibility and energy density are the two core evaluation parameters for the flexible battery. In this work, a flexible VS2 material (VS2 @CF) is fabricated by growing the VS2 nanosheet arrays on carbon foam (CF) using a simple hydrothermal method. Benefiting from the high electric conductivity and 3D foam structure, VS2 @CF shows an excellent rate capability (172.8 mAh g-1 at 5 A g-1 ) and cycling performance (130.2 mAh g-1 at 1 A g-1 after 1000 cycles) when it served as cathode material for aqueous zinc-ion batteries. More importantly, the quasi-solid-state battery VS2 @CF//Zn@CF assembled by the VS2 @CF cathode, CF-supported Zn anode, and a self-healing gel electrolyte also exhibits excellent rate capability (261.5 and 149.8 mAh g-1 at 0.2 and 5 A g-1 , respectively) and cycle performance with a capacity of 126.6 mAh g-1 after 100 cycles at 1 A g-1 . Moreover, the VS2 @CF//Zn@CF full cell also shows good flexible and self-healing properties, which can be charged and discharged normally under different bending angles and after being destroyed and then self-healing.

Crystallinity Tuning of Na3 V2 (PO4 )3 : Unlocking Sodium Storage Capacity and Inducing Pseudocapacitance Behavior.

As a promising cathode material of sodium-ion batteries, Na3 V2 (PO4 )3 (NVP) has attracted extensive attention in recent years due to its high stability and fast Na+ ion diffusion. However, the reversible capacity based on the two-electron reaction mechanism is not satisfactory limited by the inactive M1 lattice sites during the insertion/extraction process. Herein, self-supporting 3D porous NVP materials with different crystallinity are fabricated on carbon foam substrates by a facile electrostatic spray deposition method. The V5+ /V4+ redox couple is effectively activated and the three-electron reactions are realized in NVP for sodium storage by a proper crystallinity tuning. In a disordered NVP sample, an ultra-high specific capacity of 179.6 mAh g-1 at 0.2 C is achieved due to the coexistence of redox reactions of the V4+ /V3+ and V5+ /V4+ couples. Moreover, a pseudocapacitive charge storage mechanism induced by the disordered structure is first observed in the NVP electrode. An innovative model is given to understand the disorder-induced-pseudocapacitance phenomenon in this polyanion cathode material.

The Value of Color Doppler Ultrasound and CT Combined with Serum AFP Examination in the Diagnosis of Hepatocellular Carcinoma.

Objective: To evaluate the value of the combination of color Doppler ultrasound, computed tomography (CT), and serum tumor marker alpha-fetoprotein (AFP) examination in the diagnosis of hepatocellular carcinoma (HCC). Methods: 98 patients with HCC (malignant tumor group) and 50 liver lesion patients (benign control group), were selected for the study, and retrospective statistical methods were used to evaluate the diagnostic values of the three examinations on hepatocellular carcinoma. Results: (1) When comparing color Doppler ultrasound blood flow parameters, the hepatic artery diameter, peak flow velocity, minimum flow velocity, and resistance index (RI) of hepatocellular carcinoma were significantly higher than those of the benign control group (P < 0.05), while the portal vein flow velocity was significantly lower than that of the control group (P < 0.05). (2) Enhanced CT imaging of hepatocellular carcinoma lesions showed mostly outflow-type enhancement changes, with high- or slightly high-density shadowing and uneven enhancement in the arterial phase, relatively low density and withdrawal of enhancement in the portal vein phase and delayed phase. (3) The serum AFP level of hepatocellular carcinoma patients was significantly higher than that of the benign control group (P < 0.01). (4) The sensitivity of color Doppler ultrasound, CT, and serum AFP alone for the diagnosis of HCC was 79.59%, 85.71%, and 66.33%, and the accuracy was 83.78%, 87.16%, and 74.32%, respectively, while the combination of the three tests could significantly increase the sensitivity to 96.94% and the accuracy to 93.92%, compared with each individual test (P < 0.01). Conclusion: Color Doppler ultrasound and CT combined with serum AFP examination could significantly improve the sensitivity and accuracy of hepatocellular carcinoma diagnosis, reduce misdiagnosis, and facilitate early diagnosis and clinical early intervention.

Rate Performance Modification of a Lithium-Rich Manganese-Based Material through Surface Self-Doping and Coating Strategies.

Lithium-rich manganese-based materials are currently considered to be highly promising cathode materials for next-generation lithium-ion batteries due to their high specific capacity (>250 mA h g-1) and low cost. A key challenge for the commercialization of these lithium-rich manganese-based materials is their poor rate performance, which is caused by the low electronic conductivity and increasing interface charge transfer resistance produced by the side reaction during the cycling procedure. In this work, we try to improve the rate performance of a lithium-rich manganese-based material Li1.2Mn0.54Co0.13Ni0.13O2 using a collaborative approach with Co-doping and NaxCoO2-coating methods. Cobalt doping can improve the electronic conductivity, and NaxCoO2 coating provides a convenient lithium-ion diffusion channel and moderately alleviates the inevitable decrease in cycling stability caused by cobalt doping. Under the synergistic effect of these two modification strategies, the surface and internal dynamics of the Li1.2Mn0.54Co0.13Ni0.13O2 material are enhanced and its rate performance is considerably improved without decay of the cycle stability.